Postgres v9.6 reached its end of life today, so the playbook will refuse to run for you if you're still on that version.
Synapse still supports v9.6 (for now), but we're retiring support for it early, to avoid having to maintain support for so many Postgres versions. Users that are still on Postgres v9.6 can easily [upgrade Postgres](docs/maintenance-postgres.md#upgrading-postgresql) via the playbook.
## Hangouts bridge no longer updated, superseded by a Googlechat bridge
The mautrix-hangouts bridge is no longer receiving updates upstream and is likely to stop working in the future.
We still retain support for this bridge in the playbook, but you're encouraged to switch away from it.
There's a new [mautrix-googlechat](https://github.com/mautrix/googlechat) bridge that you can [install using the playbook](docs/configuring-playbook-bridge-mautrix-googlechat.md).
Your **Hangouts bridge data will not be migrated**, however. You need to start fresh with the new bridge.
Thanks to [Alexandar Mechev](https://github.com/apmechev), the playbook can now install the [beeper-linkedin](https://gitlab.com/beeper/linkedin) bridge for bridging to [LinkedIn](https://www.linkedin.com/) Messaging.
This brings the total number of bridges supported by the playbook up to 20. See all supported bridges [here](docs/configuring-playbook.md#bridging-other-networks).
To get started with bridging to LinkedIn, see [Setting up Beeper LinkedIn bridging](docs/configuring-playbook-bridge-beeper-linkedin.md).
# Sygnal upgraded - ARM support and no longer requires a database
The [Sygnal](docs/configuring-playbook-sygnal.md) push gateway has been upgraded from `v0.9.0` to `v0.10.1`.
This is an optional component for the playbook, so most of our users wouldn't care about this announcement.
Since this feels like a relatively big (and untested, as of yet) Sygnal change, we're putting up this changelog entry.
The new version is also available for the ARM architecture. It also no longer requires a database anymore.
If you need to downgrade to the previous version, changing `matrix_sygnal_version` or `matrix_sygnal_docker_image` will not be enough, as we've removed the `database` configuration completely. You'd need to switch to an earlier playbook commit.
Thanks to [Aaron Raimist](https://github.com/aaronraimist), the playbook now supports [Hydrogen](https://github.com/vector-im/hydrogen-web) - a new lightweight matrix client with legacy and mobile browser support.
By default, we still install Element, as Hydrogen is still not fully-featured. Still, people who'd like to try Hydrogen out can now install it via the playbook.
Thanks to [Toni Spets (hifi)](https://github.com/hifi), the playbook now supports bridging to [IRC](https://en.wikipedia.org/wiki/Internet_Relay_Chat) using yet another bridge (besides matrix-appservice-irc), called [Heisenbridge](https://github.com/hifi/heisenbridge).
Additional details are available in [Setting up Heisenbridge bouncer-style IRC bridging](docs/configuring-playbook-bridge-heisenbridge.md).
To improve security, we've [removed TLSv1 and TLSv1.1 support](https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/999) from our default [Coturn](https://github.com/coturn/coturn) configuration.
If you need to support old clients, you can re-enable both (or whichever one you need) with the following configuration:
Thanks to [foxcris](https://github.com/foxcris), the playbook can now make automated local Postgres backups on a fixed schedule using [docker-postgres-backup-local](https://github.com/prodrigestivill/docker-postgres-backup-local).
Additional details are available in [Setting up postgres backup](docs/configuring-playbook-postgres-backup.md).
Thanks to [Aaron Raimist](https://github.com/aaronraimist), the playbook can now install and configure the [Mjolnir](https://github.com/matrix-org/mjolnir) moderation tool (bot).
Additional details are available in [Setting up Mjolnir](docs/configuring-playbook-bot-mjolnir.md).
Thanks to [Cody Neiman](https://github.com/xangelix), the playbook can now install the [mx-puppet-groupme](https://gitlab.com/robintown/mx-puppet-groupme) bridge for bridging to [GroupMe](https://groupme.com).
This brings the total number of bridges supported by the playbook up to 18. See all supported bridges [here](docs/configuring-playbook.md#bridging-other-networks).
To get started, follow our [Setting up MX Puppet GroupMe](docs/configuring-playbook-bridge-mx-puppet-groupme.md) docs.
The playbook now supports bridging with [Instagram](https://www.instagram.com/) by installing the [mautrix-instagram](https://github.com/tulir/mautrix-instagram) bridge. This playbook functionality is available thanks to [@MarcProe](https://github.com/MarcProe).
Additional details are available in [Setting up Mautrix Instagram bridging](docs/configuring-playbook-bridge-mautrix-instagram.md).
After [lots and lots of work](https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/456) (done over many months by [Marcel Partap](https://github.com/eMPee584), [Max Klenk](https://github.com/maxklenk), a few others from the [Technical University of Dresden, Germany](https://tu-dresden.de/) and various other contributors), support for Synapse workers has finally landed.
Having support for workers makes the playbook suitable for larger homeserver deployments.
Our setup is not yet perfect (we don't support all types of workers; scaling some of them (like `pusher`, `federation_sender`) beyond a single instance is not yet supported). Still, it's a great start and can already power homeservers with thousands of users, like the [Matrix deployment at TU Dresden](https://doc.matrix.tu-dresden.de/en/) discussed in [Matrix Live S06E09 - TU Dresden on their Matrix deployment](https://www.youtube.com/watch?v=UHJX2pmT2gk).
By default, workers are disabled and Synapse runs as a single process (homeservers don't necessarily need the complexity and increased memory requirements of running a worker-based setup).
To enable Synapse workers, follow our [Load balancing with workers](docs/configuring-playbook-synapse.md#load-balancing-with-workers) documentation.
Thanks to [@Peetz0r](https://github.com/Peetz0r), the playbook can now install a bunch of tools for monitoring your Matrix server: the [Prometheus](https://prometheus.io) time-series database server, the Prometheus [node-exporter](https://prometheus.io/docs/guides/node-exporter/) host metrics exporter, and the [Grafana](https://grafana.com/) web UI.
To get get these installed, follow our [Enabling metrics and graphs (Prometheus, Grafana) for your Matrix server](docs/configuring-playbook-prometheus-grafana.md) docs page.
This update comes with a **potential breaking change** for people who were already exposing Synapse metrics (for consumption via another Prometheus installation). From now on, `matrix_synapse_metrics_enabled: true` no longer exposes metrics publicly via matrix-nginx-proxy (at `https://matrix.DOMAIN/_synapse/metrics`). To do so, you'd need to explicitly set `matrix_nginx_proxy_proxy_synapse_metrics: true`.
Thanks to [@pushytoxin](https://github.com/pushytoxin), the playbook can now install the [Etherpad](https://etherpad.org) realtime collaborative text editor. It can be used in a [Jitsi](https://jitsi.org/) audio/video call or integrated as a widget into Matrix chat rooms via the [Dimension](https://dimension.t2bot.io) integration manager.
To get it installed, follow [our Etherpad docs page](docs/configuring-playbook-etherpad.md).
## (Breaking Change) Postgres changes that require manual intervention
We've made a lot of changes to our Postgres setup and some manual action is required (described below). Sorry about the hassle.
**TLDR**: people running an [external Postgres server](docs/configuring-playbook-external-postgres.md) don't need to change anything for now. Everyone else (the common/default case) is affected and manual intervention is required.
### Why?
- we had a default Postgres password (`matrix_postgres_connection_password: synapse-password`), which we think is **not ideal for security anymore**. We now ask you to generate/provide a strong password yourself. Postgres is normally not exposed outside the container network, making it relatively secure, but still:
- by tweaking the configuration, you may end up intentionally or unintentionally exposing your Postgres server to the local network (or even publicly), while still using the default default credentials (`synapse` + `synapse-password`)
- we can't be sure we trust all these services (bridges, etc). Some of them may try to talk to or attack `matrix-postgres` using the default credentials (`synapse` + `synapse-password`)
- you may have other containers running on the same Docker network, which may try to talk to or attack `matrix-postgres` using the default credentials (`synapse` + `synapse-password`)
- our Postgres usage **was overly-focused on Synapse** (default username of `synapse` and default/main database of `homeserver`). Additional homeserver options are likely coming in the future ([Dendrite](https://matrix.org/docs/projects/server/dendrite), [Conduit](https://matrix.org/docs/projects/server/conduit), [The Construct](https://matrix.org/docs/projects/server/construct)), so being too focused on `matrix-synapse` is not great. From now on, Synapse is just another component of this playbook, which happens to have an *additional database* (called `synapse`) on the Postgres server.
- we try to reorganize things a bit, to make the playbook even friendlier to people running an [external Postgres server](docs/configuring-playbook-external-postgres.md). Work on this will proceed in the future.
So, this is some **effort to improve security** and to **prepare for a brighter future of having more homeserver options** than just Synapse.
### What has really changed?
- the default superuser Postgres username is now `matrix` (used to be `synapse`)
- the default Postgres database is now `matrix` (used to be `homeserver`)
- Synapse's database is now `synapse` (used to be `homeserver`). This is now just another "additional database" that the playbook manages for you
- Synapse's user called `synapse` is just a regular user that can only use the `synapse` database (not a superuser anymore)
### What do I do if I'm using the integrated Postgres server (default)?
By default, the playbook runs an integrated Postgres server for you in a container (`matrix-postgres`). Unless you've explicitly configured an [external Postgres server](docs/configuring-playbook-external-postgres.md), these steps are meant for you.
To migrate to the new setup, expect a few minutes of downtime, while you follow these steps:
1. We believe the steps below are safe and you won't encounter any data loss, but consider [making a Postgres backup](docs/maintenance-postgres.md#backing-up-postgresql) anyway. If you've never backed up Postgres, now would be a good time to try it.
2. Generate a strong password to be used for your superuser Postgres user (called `matrix`). You can use `pwgen -s 64 1` to generate it, or some other tool. The **maximum length** for a Postgres password is 100 bytes (characters). Don't go crazy!
If you've explicitly configured an [external Postgres server](docs/configuring-playbook-external-postgres.md), there are **no changes** that you need to do at this time.
The fact that we've renamed Synapse's database from `homeserver` to `synapse` (in our defaults) should not affect you, as you're already explicitly defining `matrix_synapse_database_database` (if you've followed our guide, that is). If you're not explicitly defining this variable, you may wish to do so (`matrix_synapse_database_database: homeserver`), to avoid the new `synapse` default and keep things as they were.
**Update from 2021-11-15**: SQLite support has been re-added to the mautrix-facebook bridge in [v0.3.2](https://github.com/mautrix/facebook/releases/tag/v0.3.2). You can ignore this changelog entry.
A new version of the [mautrix-facebook](https://github.com/tulir/mautrix-facebook) bridge has been released. It's a full rewrite of its backend and the bridge now requires Postgres. New versions of the bridge can no longer run on SQLite.
**TLDR**: if you're NOT using an [external Postgres server](docs/configuring-playbook-external-postgres.md) and have NOT forcefully kept the bridge on SQLite during [The big move to all-on-Postgres (potentially dangerous)](#the-big-move-to-all-on-postgres-potentially-dangerous), you will be automatically upgraded without manual intervention. All you need to do is send a `login` message to the Facebook bridge bot again.
Whether this change requires your intervention depends mostly on:
- whether you're using an [external Postgres server](docs/configuring-playbook-external-postgres.md). If yes, then [you need to do something](#upgrade-path-for-people-running-an-external-postgres-server).
- or whether you've force-changed the bridge's database engine to SQLite (`matrix_mautrix_facebook_database_engine: 'sqlite'` in your `vars.yml`) some time in the past (likely during [The big move to all-on-Postgres (potentially dangerous)](#the-big-move-to-all-on-postgres-potentially-dangerous)).
As already mentioned above, you most likely don't need to do anything. If you rerun the playbook and don't get an error, you've been automatically upgraded. Just send a `login` message to the Facebook bridge bot again. Otherwise, read below for a solution.
### Upgrade path for people NOT running an external Postgres server (default for the playbook)
If you're **not running an external Postgres server**, then this bridge either already works on Postgres for you, or you've intentionally kept it back on SQLite with custom configuration (`matrix_mautrix_facebook_database_engine: 'sqlite'` in your `vars.yml`) .
Simply remove that custom configuration from your `vars.yml` file (if it's there) and re-run the playbook. It should upgrade you automatically.
You'll need to send a `login` message to the Facebook bridge bot again.
Alternatively, [you can stay on SQLite for a little longer](#staying-on-sqlite-for-a-little-longer-temporary-solution).
### Upgrade path for people running an external Postgres server
For people using the internal Postgres server (the default for the playbook):
- we automatically create an additional `matrix_mautrix_facebook` Postgres database and credentials to access it
- we automatically adjust the bridge's `matrix_mautrix_facebook_database_*` variables to point the bridge to that Postgres database
- we use [pgloader](https://pgloader.io/) to automatically import the existing SQLite data for the bridge into the `matrix_mautrix_facebook` Postgres database
If you are using an [external Postgres server](docs/configuring-playbook-external-postgres.md), unfortunately we currently can't do any of that for you.
You have 3 ways to proceed:
- contribute to the playbook to make this possible (difficult)
- run [pgloader](https://pgloader.io/) manually (we import this bridge's data using default settings and it works well)
- define `matrix_mautrix_facebook_database_*` variables in your `vars.yml` file (credentials, etc.) - you can find their defaults in `roles/matrix-mautrix-facebook/defaults/main.yml`
- switch the bridge to Postgres (`matrix_mautrix_facebook_database_engine: 'postgres'` in your `vars.yml` file)
- re-run the playbook (`--tags=setup-all,start`) and ensure the bridge works (`systemctl status matrix-mautrix-facebook` and `journalctl -fu matrix-mautrix-facebook`)
- send a `login` message to the Facebook bridge bot again
- or, [stay on SQLite for a little longer (temporary solution)](#staying-on-sqlite-for-a-little-longer-temporary-solution)
### Staying on SQLite for a little longer (temporary solution)
To keep using this bridge with SQLite for a little longer (**not recommended**), use the following configuration in your `vars.yml` file:
```yaml
# Force-change the database engine to SQLite.
matrix_mautrix_facebook_database_engine: 'sqlite'
# Force-downgrade to the last bridge version which supported SQLite.
If you do this, keep in mind that **you can't run this forever**. This SQLite-supporting bridge version is not getting any updates and will break sooner or later. The playbook will also drop support for SQLite at some point in the future.
[matrix-corporal v2 has been released](https://github.com/devture/matrix-corporal/releases/tag/2.0.0) and the playbook also supports it now.
No manual intervention is required in the common case.
The new [matrix-corporal](https://github.com/devture/matrix-corporal) version is also the first one to support Interactive Authentication. If you wish to enable that (hint: you should), you'll need to set up the [REST auth password provider](docs/configuring-playbook-rest-auth.md). There's more information in [our matrix-corporal docs](docs/configuring-playbook-matrix-corporal.md).
SSL configuration (protocols, ciphers) can now be more easily controlled thanks to us making use of configuration presets.
We define a few presets (old, intermediate, modern), following the [Mozilla SSL Configuration Generator](https://ssl-config.mozilla.org/#server=nginx).
A new variable `matrix_nginx_proxy_ssl_preset` controls which preset is used (defaults to `"intermediate"`).
Compared to before, this changes nginx's `ssl_prefer_server_ciphers` to `off` (used to default to `on`). It also add some more ciphers to the list, giving better performance on mobile devices, and removes some weak ciphers. More information in the [documentation](docs/configuring-playbook-nginx.md).
To revert to the old behaviour, set the following variables:
Just like before, you can still use your own custom protocols by specifying them in `matrix_nginx_proxy_ssl_protocols`. Doing so overrides the values coming from the preset.
Thanks to [laszabine](https://github.com/laszabine)'s efforts, the playbook now supports bridging to [Signal](https://www.signal.org/) via the [mautrix-signal](https://github.com/tulir/mautrix-signal) bridge. See our [Setting up Mautrix Signal bridging](docs/configuring-playbook-bridge-mautrix-signal.md) documentation page for getting started.
If you had installed the mautrix-signal bridge while its Pull Request was still work-in-progress, you can migrate your data to the new and final setup by referring to [this comment](https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/686#issuecomment-753510789).
## The big move to all-on-Postgres (potentially dangerous)
**TLDR**: all your bridges (and other services) will likely be auto-migrated from SQLite/nedb to Postgres, hopefully without trouble. You can opt-out (see how below), if too worried about breakage.
Until now, we've only used Postgres as a database for Synapse. All other services (bridges, bots, etc.) were kept simple and used a file-based database (SQLite or nedb).
Since [this huge pull request](https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/740), **all of our services now use Postgres by default**. Thanks to [Johanna Dorothea Reichmann](https://github.com/jdreichmann) for starting the work on it and for providing great input!
Moving all services to Postgres brings a few **benefits** to us:
- **improved performance**
- **improved compatibility**. Most bridges are deprecating SQLite/nedb support or offer less features when not on Postgres.
- **easier backups**. It's still some effort to take a proper backup (Postgres dump + various files, keys), but a Postgres dump now takes you much further.
- we're now **more prepared to introduce other services** that need a Postgres database - [Dendrite](https://github.com/matrix-org/dendrite), the [mautrix-signal](https://github.com/tulir/mautrix-signal) bridge (existing [pull request](https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/686)), etc.
### Key takeway
- existing installations that use an [external Postgres](https://github.com/spantaleev/matrix-docker-ansible-deploy/blob/master/docs/configuring-playbook-external-postgres.md) server should be unaffected (they remain on SQLite/nedb for all services, except Synapse)
- for existing installations which use our integrated Postgres database server (`matrix-postgres`, which is the default), **we automatically migrate data** from SQLite/nedb to Postgres and **archive the database files** (`something.db` -> `something.db.backup`), so you can restore them if you need to go back (see how below).
This is a **very large and somewhat untested change** (potentially dangerous), so **if you're not feeling confident/experimental, opt-out** of it for now. Still, it's the new default and what we (and various bridges) will focus on going forward, so don't stick to old ways for too long.
You can remain on SQLite/nedb (at least for now) by adding a variable like this to your `vars.yml` file for each service you use: `matrix_COMPONENT_database_engine: sqlite` (e.g. `matrix_mautrix_facebook_database_engine: sqlite`).
Some services (like `appservice-irc` and `appservice-slack`) don't use SQLite, so use `nedb`, instead of `sqlite` for them.
### Going back to SQLite/nedb if things went wrong
If you went with the Postgres migration and it went badly for you (some bridge not working as expected or not working at all), do this:
- stop all services (`ansible-playbook -i inventory/hosts setup.yml --tags=stop`)
- SSH into the server and rename the old database files (`something.db.backup` -> `something.db`). Example: `mv /matrix/mautrix-facebook/data/mautrix-facebook.db.backup /matrix/mautrix-facebook/data/mautrix-facebook.db`
- switch the affected service back to SQLite (e.g. `matrix_mautrix_facebook_database_engine: sqlite`). Some services (like `appservice-irc` and `appservice-slack`) don't use SQLite, so use `nedb`, instead of `sqlite` for them.
- re-run the playbook (`ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start`)
We've removed support for the unmaintained [synapse-janitor](https://github.com/xwiki-labs/synapse_scripts) script. There's been past reports of it corrupting the Synapse database. Since there hasn't been any new development on it and it doesn't seem too useful nowadays, there's no point in including it in the playbook.
If you need to clean up or compact your database, consider using the Synapse Admin APIs directly. See our [Synapse maintenance](docs/maintenance-synapse.md) and [Postgres maintenance](docs/maintenance-postgres.md) documentation pages for more details.
(No need to do anything special in relation to this. Just something to keep in mind)
Docker 20.10 got released recently and your server will likely get it the next time you update.
This is the first major Docker update in a long time and it packs a lot of changes.
Some of them introduced some breakage for us initially (see [here](https://github.com/spantaleev/matrix-docker-ansible-deploy/commit/d08b27784f222effcbce2abf924bf07bbe0893be) and [here](https://github.com/spantaleev/matrix-docker-ansible-deploy/commit/7593d969e316cc0144bce378a5be58c76c2c37ee)), but it should be all good now.
## openid APIs exposed by default on the federation port when federation disabled
We've changed some defaults. People running with our default configuration (federation enabled), are not affected at all.
If you are running an unfederated server (`matrix_synapse_federation_enabled: false`), this may be of interest to you.
When federation is disabled, but ma1sd or Dimension are enabled, we'll now expose the `openid` APIs on the federation port.
These APIs are necessary for some ma1sd features to work. If you'd like to prevent this, you can: `matrix_synapse_federation_port_openid_resource_required: false`.
## Recent Jitsi updates may require configuration changes
We've recently [updated from Jitsi build 4857 to build 5142](https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/719), which brings a lot of configuration changes.
**If you use our default Jitsi settings, you won't have to do anything.**
People who have [fine-tuned Jitsi](docs/configuring-playbook-jitsi.md#optional-fine-tune-jitsi) may find that some options got renamed now, others are gone and yet others still need to be defined in another way.
The next time you run the playbook [installation](docs/installing.md) command, our validation logic will tell you if you're using some variables like that and will recommend a migration path for each one.
Additionally, we've recently disabled transcriptions (`matrix_jitsi_enable_transcriptions: false`) and recording (`matrix_jitsi_enable_recording: false`) by default. These features did not work anyway, because we don't install the required dependencies for them (Jigasi and Jibri, respectively). If you've been somehow pointing your Jitsi installation to some manually installed Jigasi/Jibri service, you may need to toggle these flags back to enabled to have transcriptions and recordings working.
Because of many problems using gammu as SMS provider, matrix-sms-bridge now uses (https://github.com/RebekkaMa/android-sms-gateway-server) by default. See (the docs)[./docs/configuring-playbook-bridge-matrix-bridge-sms.md] which new vars you need to add.
If you are using this playbook to deploy matrix-sms-bridge and still really want to use gammu as SMS provider, we could possibly add support for both android-sms-gateway-server and gammu.
The new version of [matrix-sms-bridge](https://github.com/benkuly/matrix-sms-bridge) changed its database from neo4j to h2. You need to sync the bridge at the first start. Note that this only will sync rooms where the @smsbot:yourServer is member. For rooms without @smsbot:yourServer you need to kick and invite the telephone number **or** invite @smsbot:yourServer.
1. Add the following to your `vars.yml` file: `matrix_sms_bridge_container_extra_arguments=['--env SPRING_PROFILES_ACTIVE=initialsync']`
2. Login to your host shell and remove old systemd file from your host: `rm /etc/systemd/system/matrix-sms-bridge-database.service`
2. Run `ansible-playbook -i inventory/hosts setup.yml --tags=setup-matrix-sms-bridge,start`
3. Login to your host shell and check the logs with `journalctl -u matrix-sms-bridge` until the sync finished.
4. Remove the var from the first step.
5. Run `ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start`.
## (Compatibility Break) https://matrix.DOMAIN/ now redirects to https://element.DOMAIN/
Until now, we used to serve a static page coming from Synapse at `https://matrix.DOMAIN/`. This page was not very useful to anyone.
Since `matrix.DOMAIN` may be accessed by regular users in certain conditions, it's probably better to redirect them to a better place (e.g. to the [Element](docs/configuring-playbook-client-element.md) client).
If Element is installed (`matrix_client_element_enabled: true`, which it is by default), we now redirect people to it, instead of showing them a Synapse static page.
If you'd like to control where the redirect goes, use the `matrix_nginx_proxy_proxy_matrix_client_redirect_root_uri_to_domain` variable.
To restore the old behavior of not redirecting anywhere and serving the Synapse static page, set it to an empty value (`matrix_nginx_proxy_proxy_matrix_client_redirect_root_uri_to_domain: ""`).
## (Compatibility Break) /_synapse/admin is no longer publicly exposed by default
We used to expose the Synapse Admin APIs publicly (at `https://matrix.DOMAIN/_synapse/admin`).
These APIs require authentication with a valid access token, so it's not that big a deal to expose them.
However, following [official Synapse's reverse-proxying recommendations](https://github.com/matrix-org/synapse/blob/master/docs/reverse_proxy.md#synapse-administration-endpoints), we're no longer exposing `/_synapse/admin` by default.
If you'd like to restore restore the old behavior and expose `/_synapse/admin` publicly, you can use the following configuration (in your `vars.yml`):
We were claiming to support [Ansible](https://www.ansible.com/) v2.5.2 and higher, but issues like [#662](https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/662) demonstrate that we need at least v2.7.0.
If you've been using the playbook without getting any errors until now, you're probably on a version higher than that already (or you're not using the `matrix-ma1sd` and `matrix-client-element` roles).
Our [Ansible docs page](docs/ansible.md) contains information on how to run a more up-to-date version of Ansible.
The playbook now installs [Postgres 13](https://www.postgresql.org/about/news/postgresql-13-released-2077/) by default.
If you have have an existing setup, it's likely running on an older Postgres version (9.x, 10.x, 11.x or 12.x). You can easily upgrade by following the [upgrading PostgreSQL guide](docs/maintenance-postgres.md#upgrading-postgresql).
The playbook can now help you set up [matrix-registration](https://github.com/ZerataX/matrix-registration) - an application that lets you keep your Matrix server's registration private, but still allow certain users (those having a unique registration link) to register by themselves.
See our [Setting up matrix-registration](docs/configuring-playbook-matrix-registration.md) documentation page to get started.
The playbook can now help you use [rust-synapse-compress-state](https://github.com/matrix-org/rust-synapse-compress-state) to compress the state groups in your Synapse database.
See our [Compressing state with rust-synapse-compress-state](docs/maintenance-synapse.md#compressing-state-with-rust-synapse-compress-state) documentation page to get started.
Thanks to [Hugues Morisset](https://github.com/izissise)'s efforts, the playbook now supports bridging to [Steam](https://steamapp.com/) via the [mx-puppet-steam](https://github.com/icewind1991/mx-puppet-steam) bridge. See our [Setting up MX Puppet Steam bridging](docs/configuring-playbook-bridge-mx-puppet-steam.md) documentation page for getting started.
Thanks to [Hugues Morisset](https://github.com/izissise)'s efforts, the playbook now supports bridging to [Discord](https://discordapp.com/) via the [mx-puppet-discord](https://github.com/Sorunome/mx-puppet-discord) bridge. See our [Setting up MX Puppet Discord bridging](docs/configuring-playbook-bridge-mx-puppet-discord.md) documentation page for getting started.
**Note**: this is a new Discord bridge. The playbook still retains Discord bridging via [matrix-appservice-discord](docs/configuring-playbook-bridge-appservice-discord.md). You're free too use the bridge that serves you better, or even both (for different users and use-cases).
Thanks to [Johanna Dorothea Reichmann](https://github.com/jdreichmann)'s efforts, the playbook now supports bridging to [Instagram](https://www.instagram.com/) via the [mx-puppet-instagram](https://github.com/Sorunome/mx-puppet-instagram) bridge. See our [Setting up MX Puppet Instagram bridging](docs/configuring-playbook-bridge-mx-puppet-instagram.md) documentation page for getting started.
Thanks to [Tulir Asokan](https://github.com/tulir)'s efforts, the playbook now supports bridging to [Twitter](https://twitter.com/) via the [mx-puppet-twitter](https://github.com/Sorunome/mx-puppet-twitter) bridge. See our [Setting up MX Puppet Twitter bridging](docs/configuring-playbook-bridge-mx-puppet-twitter.md) documentation page for getting started.
## (Post Mortem / fixed Security Issue) Re-enabling User Directory search powered by the ma1sd Identity Server
User Directory search requests used to go to the ma1sd identity server by default, which queried its own stores and the Synapse database.
ma1sd's [security issue](https://github.com/ma1uta/ma1sd/issues/44) has been fixed in version `2.4.0`, with [this commit](ma1uta/ma1sd@2bb5a734d11662b06471113cf3d6b4cee5e33a85). `ma1sd 2.4.0` is now the default version for this playbook. For more information on what happened, please check the mentioned issue.
We are re-enabling user directory search with this update. Those who would like to keep it disabled can use this configuration: `matrix_nginx_proxy_proxy_matrix_user_directory_search_enabled: false`
As always, re-running the playbook is enough to get the updated bits.
The current version of [matrix-sms-bridge](https://github.com/benkuly/matrix-sms-bridge) needs you to delete the database to work as expected. Just remove `/matrix/matrix-sms-bridge/database/*`. It also adds a new requried var `matrix_sms_bridge_default_region`.
To reuse your existing rooms, invite `@smsbot:yourServer` to the room or write a message. You are also able to use automated room creation with telephonenumers by writing `sms send -t 01749292923 "Hello World"` in a room with `@smsbot:yourServer`. See [the docs](https://github.com/benkuly/matrix-sms-bridge) for more information.
Thanks to [benkuly](https://github.com/benkuly)'s efforts, the playbook now supports bridging to SMS (with one telephone number only) via [matrix-sms-bridge](https://github.com/benkuly/matrix-sms-bridge).
## (Compatibility Break / Security Issue) Disabling User Directory search powered by the ma1sd Identity Server
User Directory search requests used to go to the ma1sd identity server by default, which queried its own stores and the Synapse database.
ma1sd current has [a security issue](https://github.com/ma1uta/ma1sd/issues/44), which made it leak information about all users - including users created by bridges, etc.
Until the issue gets fixed, we're making User Directory search not go to ma1sd by default. You **need to re-run the playbook and restart services to apply this workaround**.
*If you insist on restoring the old behavior* (**which has a security issue!**), you *might* use this configuration: `matrix_nginx_proxy_proxy_matrix_user_directory_search_enabled: "{{ matrix_ma1sd_enabled }}"`
Thanks to [Rodrigo Belem](https://github.com/rbelem)'s efforts, the playbook now supports bridging to [Slack](https://slack.com) via the [mx-puppet-slack](https://github.com/Sorunome/mx-puppet-slack) bridge.
See our [Setting up MX Puppet Slack bridging](docs/configuring-playbook-bridge-mx-puppet-slack.md) documentation page for getting started.
Thanks to [Rodrigo Belem](https://github.com/rbelem)'s efforts, the playbook now supports bridging to [Skype](https://www.skype.com) via the [mx-puppet-skype](https://github.com/Sorunome/mx-puppet-skype) bridge.
See our [Setting up MX Puppet Skype bridging](docs/configuring-playbook-bridge-mx-puppet-skype.md) documentation page for getting started.
The [Jitsi support](#jitsi-support) we had landed a few weeks ago was working well, but it was always open to the whole world.
Running such an open instance is not desirable to most people, so [teutat3s](https://github.com/teutat3s) has contributed support for making Jitsi use authentication.
To make your Jitsi server more private, see the [configure internal Jitsi authentication and guests mode](docs/configuring-playbook-jitsi.md#optional-configure-internal-jitsi-authentication-and-guests-mode) section in our Jitsi documentation.
Thanks to [Marcel Partap](https://github.com/eMPee584)'s efforts, the [mxisd](https://github.com/kamax-io/mxisd) identity server, which has been deprecated for a long time, has finally been replaced by [ma1sd](https://github.com/ma1uta/ma1sd), a compatible fork.
**If you're using the default playbook configuration**, you don't need to do anything -- your mxisd installation will be replaced with ma1sd and all existing data will be migrated automatically the next time you run the playbook.
**If you're doing something more special** (defining custom `matrix_mxisd_*` variables), the playbook will ask you to rename them to `matrix_ma1sd_*`.
You're also encouraged to test that ma1sd works well for such a more custom setup.
Thanks to [Christian Lupus](https://github.com/christianlupus)'s efforts, the playbook now supports installing to an [Archlinux](https://www.archlinux.org/) server.
The playbook can now (optionally) install the [Jitsi](https://jitsi.org/) video-conferencing platform and integrate it with [Riot](docs/configuring-playbook-riot-web.md).
See our [Jitsi documentation page](docs/configuring-playbook-jitsi.md) to get started.
Thanks to [Gergely Horváth](https://github.com/hooger)'s effort, the playbook supports installing to a Raspberry Pi server, for at least some of the services.
The login page previously said "Sign in to your Matrix account on matrix.example.org" (the homeserver's domain name). It will now say "Sign in ... on example.org" (the server name) by default, or "Sign in ... on Our Server" if you set the variable to "Our Server".
To support this, the config.json template is changed to use the configuration key `default_server_config` for setting the default HS/IS, and the new configuration key `server_name` is added in there.
To improve security, we've removed TLSv1.1 support from our default matrix-nginx-proxy configuration.
If you need to support old clients, you can re-enable it with the following configuration: `matrix_nginx_proxy_ssl_protocols: "TLSv1.1 TLSv1.2 TLSv1.3"`
By default, we've been using a UTF-8 collation for Postgres. This is known to cause Synapse some troubles (see the [relevant issue](https://github.com/matrix-org/synapse/issues/6722)) on systems that use [glibc](https://www.gnu.org/software/libc/). We run Postgres in an [Alpine Linux](https://alpinelinux.org/) container (which uses [musl](https://www.musl-libc.org/), and not glibc), so our users are likely not affected by the index corruption problem observed by others.
Still, we might become affected in the future. In any case, it's imminent that Synapse will complain about databases which do not use a C collation.
To avoid future problems, we recommend that you run the following command:
It forces a [Postgres database upgrade](docs/maintenance-postgres.md#upgrading-postgresql), which would recreate your Postgres database using the proper (`C`) collation. If you are low on disk space, or run into trouble, refer to the Postgres database upgrade documentation page.
Thanks to a contribution from [Björn Marten](https://github.com/tripleawwy) from [netresearch](https://www.netresearch.de/), the playbook can now install and configure [matrix-appservice-webhooks](https://github.com/turt2live/matrix-appservice-webhooks) for you. This bridge provides support for Slack-compatible webhooks.
Learn more in [Setting up Appservice Webhooks](docs/configuring-playbook-bridge-appservice-webhooks.md).
## Added support for automatic Double Puppeting for all Mautrix bridges
Double Puppeting can now be easily enabled for all Mautrix bridges supported by the playbook (Facebook, Hangouts, Whatsapp, Telegram).
This is possible due to those bridges' integration with [matrix-synapse-shared-secret-auth](https://github.com/devture/matrix-synapse-shared-secret-auth) - yet another component that this playbook can install for you.
To get started, following the playbook's documentation for the bridge you'd like to configure.
## Added support for an alternative method for using another webserver
We have added support for making `matrix-nginx-proxy` not being so invasive, so that it would be easier to [use your own webserver](docs/configuring-playbook-own-webserver.md).
The documentation has been updated with a **Method 2**, which might make "own webserver" setup easier in some cases (such as [reverse-proxying using Traefik](https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/296)).
**Existing users** are not affected by this and **don't need to change anything**.
The defaults are still the same (`matrix-nginx-proxy` obtaining SSL certificates and doing everything for you automatically).
## Tightened security around room directory publishing
As per this [advisory blog post](https://matrix.org/blog/2019/11/09/avoiding-unwelcome-visitors-on-private-matrix-servers), we've decided to change the default publishing rules for the Matrix room directory.
Our general goal is to favor privacy and security when running personal (family & friends) and corporate homeservers.
Both of these likely benefit from having a more secure default of **not showing the room directory without authentication** and **not publishing the room directory over federation**.
As with anything else, these new defaults can be overriden by changing the `matrix_synapse_allow_public_rooms_without_auth` and `matrix_synapse_allow_public_rooms_over_federation` variables, respectively.
Postgres [upgrading](docs/maintenance-postgres.md#upgrading-postgresql) and [importing](docs/importing-postgres.md) have been improved to add support for multiple databases and roles.
Previously, the playbook would only take care of the `homeserver` database and `synapse` user.
We now back up and restore all databases and users on the Postgres server.
For now, the playbook only uses that one database (`homeserver`) and that one single user (`synapse`), so it's all the same.
However, in the future, additional components besides Synapse may also make use the Postgres database server.
One such example is the [matrix-appservice-slack](https://github.com/matrix-org/matrix-appservice-slack) bridge, which strongly encourages use of Postgres in its v1.0 release. We are yet to upgrade to it.
Additionally, Postgres [upgrading](docs/maintenance-postgres.md#upgrading-postgresql) now uses gzipped dump files by default, to minimize disk space usage.
The playbook now installs [Postgres 12](https://www.postgresql.org/about/news/1976/) by default.
If you have have an existing setup, it's likely running on an older Postgres version (9.x, 10.x or 11.x). You can easily upgrade by following the [upgrading PostgreSQL guide](docs/maintenance-postgres.md#upgrading-postgresql).
Synapse 1.4.0 [is out](https://matrix.org/blog/2019/10/03/synapse-1-4-0-released) with lots of changes related to privacy.
Its new defaults (which we adopt as well) mean that certain old data will automatically get purged after a certain number of days. 1.4.0 automatically garbage collects redacted messages (defaults to 7 days) and removes unused IP and user agent information stored in the user_ips table (defaults to 30 days). If you'd like to preserve this data, we encourage you to look at the `redaction_retention_period` and `user_ips_max_age` options (controllable by the `matrix_synapse_redaction_retention_period` and `matrix_synapse_user_ips_max_age` playbook variables, respectively) before doing the upgrade. If you'd like to keep data indefinitely, set these variables to `null` (e.g. `matrix_synapse_redaction_retention_period: ~`).
From now on the `trusted_key_servers` setting for Synapse is configurable. It still defaults to `matrix.org` just like it always has, but in a more explicit way now. If you'd like to use another trusted key server, adjust the `matrix_synapse_trusted_key_servers` playbook variable.
Synapse 1.4.0 also changes lots of things related to identity server integration.
Because Synapse will now by default be responsible for validating email addresses for user accounts, running without an identity server looks more feasible.
We still [have concerns](https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/275/files#r331104117) over disabling the identity server by default, so for now it remains enabled.
There have been lots of invite-spam attacks lately and [Travis](https://github.com/t2bot) has created a Synapse module ([synapse-simple-antispam](https://github.com/t2bot/synapse-simple-antispam)) to let people protect themselves.
From now on, you can easily install and configure this spam checker module through the playbook.
Learn more in [Setting up Synapse Simple Antispam](docs/configuring-playbook-synapse-simple-antispam.md).
Similarly to [Extensible Synapse configuration](#extensible-synapse-configuration) (below), Riot-web configuration is also extensible now.
From now on, you can extend/override Riot-web's configuration by making use of the `matrix_riot_web_configuration_extension_json` variable.
This should be enough for most customization needs.
If you need even more power, you can now also take full control and override `matrix_riot_web_configuration_default` (or `matrix_riot_web_configuration`) directly.
Previously, we had to create custom Ansible variables for each and every Synapse setting.
This lead to too much effort (and configuration ugliness) to all of Synapse's settings, so naturally, not all features of Synapse could be controlled through the playbook.
From now on, you can extend/override the Synapse server's configuration by making use of the `matrix_synapse_configuration_extension_yaml` variable.
This should be enough for most customization needs.
If you need even more power, you can now also take full control and override `matrix_synapse_configuration` (or `matrix_synapse_configuration_yaml`) directly.
Learn more here in [Configuring Synapse](docs/configuring-playbook-synapse.md).
Thanks to the [great work](https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/205) of [kingoftheconnors](https://github.com/kingoftheconnors) and [Stuart Mumford (Cadair)](https://github.com/Cadair), the playbook now supports bridging to [Slack](https://slack.com) via the [appservice-slack](https://github.com/matrix-org/matrix-appservice-slack) bridge.
Additional details are available in [Setting up Appservice Slack bridging](docs/configuring-playbook-bridge-appservice-slack.md).
Thanks to the [great work](https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/251) of [Eduardo Beltrame (Munfred)](https://github.com/Munfred) and [Robbie D (microchipster)](https://github.com/microchipster), the playbook now supports bridging to [Google Hangouts](https://hangouts.google.com/) via the [mautrix-hangouts](https://mau.dev/tulir/mautrix-hangouts) bridge.
Additional details are available in [Setting up Mautrix Hangouts bridging](docs/configuring-playbook-bridge-mautrix-hangouts.md).
## Synapse logging level has been reduced to WARNING
After [some discussion in our support room](https://matrix.to/#/!PukFFdIcHgtaaHZflT:devture.com/$156476852524179TBeKy:matrix.org?via=devture.com&via=matrix.org&via=librem.one), we've decided to change the default logging level for Synapse from `INFO` to `WARNING`.
This greatly reduces the number of log messages that are being logged, leading to:
- much less disk space dedicated to Synapse and thus, logs kept for longer
- easier to find some important `WARNING`, `ERROR` and `CRITICAL` messages, as they're not longer buried in thousands of non-important `INFO` messages
If you'd like to track down an issue, you [can always increase the logging level as described here](./docs/maintenance-and-troubleshooting.md#increasing-synapse-logging).
## Synapse Maintenance docs and synapse-janitor support are available
The playbook can now help you with Synapse's maintenance.
There's a new documentation page about [Synapse maintenance](./docs/maintenance-synapse.md) and another section on [Postgres vacuuming](./docs/maintenance-postgres.md#vacuuming-postgresql).
Among other things, if your Postgres database has grown significantly over time, you may wish to [ask the playbook to purge unused data with synapse-janitor](./docs/maintenance-synapse.md#purging-unused-data-with-synapse-janitor) for you.
Following what the official Synapse Docker image is doing ([#5565](https://github.com/matrix-org/synapse/pull/5565)) and what we've been doing for mostly everything installed by this playbook, **Synapse no longer logs to text files** (`/matrix/synapse/run/homeserver.log*`).
From now on, Synapse would only log to console, which goes to systemd's journald.
To see Synapse's logs, execute: `journalctl -fu matrix-synapse`
Because of this, the following variables have become obsolete and were removed:
-`matrix_synapse_max_log_file_size_mb`
-`matrix_synapse_max_log_files_count`
To prevent confusion, it'd be better if you delete all old files manually after you've upgraded (`rm -f /matrix/synapse/run/homeserver.log*`).
Because Synapse is incredibly chatty when it comes to logging (here's [one such issue](https://github.com/matrix-org/synapse/issues/4751) describing the problem), if you're running an ancient distribution (like CentOS 7.0), be advised that systemd's journald default logging restrictions may not be high enough to capture all log messages generated by Synapse. This is especially true if you've got a busy (Synapse) server. We advise that you manually add `RateLimitInterval=0` and `RateLimitBurst=0` under `[Storage]` in the `/etc/systemd/journald.conf` file, followed by restarting the logging service (`systemctl restart systemd-journald`).
## (BC Break) Discord bridge configuration is now entirely managed by the playbook
Until now, the `config.yaml` file for the [Discord bridge](docs/configuring-playbook-bridge-appservice-discord.md) was managed by the playbook, but the `registration.yaml` file was not.
From now on, the playbook will keep both configuration files sync for you.
This means that if you were making manual changes to the `/matrix/appservice-discord/discord-registration.yaml` configuration file, those would be lost the next time you run the playbook.
The bridge now stores configuration in a subdirectory (`/matrix/appservice-discord/config`).
Likewise, data is now also stored in a subdirectory (`/matrix/appservice-discord/data`). When you run the playbook with an existing database file (`/matrix/appservice-discord/discord.db`), the playbook will stop the bridge and relocate the database file to the `./data` directory. There's no data-loss involved. You'll need to restart the bridge manually though (`--tags=start`).
The main directory (`/matrix/appservice-discord`) may contain some leftover files (`user-store.db`, `room-store.db`, `config.yaml`, `discord-registration.yaml`, `invite_link`). These are no longer necessary and can be deleted manually.
We're now following the default sample configuration for the Discord bridge.
If you need to override some values, define them in `matrix_appservice_discord_configuration_extension_yaml`.
## (BC Break) WhatsApp bridge configuration is now entirely managed by the playbook
Until now, configuration files for the [WhatsApp bridge](docs/configuring-playbook-bridge-mautrix-whatsapp.md) were created by the playbook initially, but never modified later on.
From now on, the playbook will keep the configuration in sync for you.
This means that if you were making manual changes to the `/matrix/mautrix-whatsapp/config.yaml` or `/matrix/mautrix-whatsapp/registration.yaml` configuration files, those would be lost the next time you run the playbook.
The bridge now stores configuration in a subdirectory (`/matrix/mautrix-whatsapp/config`), so your old configuration remains in the base directory (`/matrix/mautrix-whatsapp`).
You need to migrate any manual changes over to the new `matrix_mautrix_whatsapp_configuration_extension_yaml` variable, so that the playbook would apply them for you.
Likewise, data is now also stored in a subdirectory (`/matrix/mautrix-whatsapp/data`). When you run the playbook with an existing database file (`/matrix/mautrix-whatsapp/mautrix-whatsapp.db`), the playbook will stop the bridge and relocate the database file to the `./data` directory. There's no data-loss involved. You'll need to restart the bridge manually though (`--tags=start`).
We're now following the default configuration for the WhatsApp bridge.
## (BC Break) IRC bridge configuration is now entirely managed by the playbook
Until now, configuration files for the [IRC bridge](docs/configuring-playbook-bridge-appservice-irc.md) were created by the playbook initially, but never modified later on.
From now on, the playbook will keep the configuration in sync for you.
This means that if you were making manual changes to the `/matrix/appservice-irc/config.yaml` or `/matrix/appservice-irc/registration.yaml` configuration files, those would be lost the next time you run the playbook.
The bridge now stores configuration in a subdirectory (`/matrix/appservice-irc/config`), so your old configuration remains in the base directory (`/matrix/appservice-irc`).
Previously, we asked people to configure bridged IRC servers by extending the bridge configuration (`matrix_appservice_irc_configuration_extension_yaml`). While this is still possible and will continue working forever, **we now recommend defining IRC servers in the easier to use `matrix_appservice_irc_ircService_servers` variable**. See [our IRC bridge documentation page](docs/configuring-playbook-bridge-appservice-irc.md) for an example.
If you decide to continue using `matrix_appservice_irc_configuration_extension_yaml`, you might be interested to know that `ircService.databaseUri` and a few other keys now have default values in the base configuration (`matrix_appservice_irc_configuration_yaml`). You may wish to stop redefining those keys, unless you really intend to override them. You most likely only need to override `ircService.servers`.
Bridge data (`passkey.pem` and database files) is now also stored in a subdirectory (`/matrix/appservice-irc/data`).
When you run the playbook with an existing `/matrix/appservice-irc/passkey.pem` file, the playbook will stop the bridge and relocate the passkey and database files (`rooms.db` and `users.db`) to the `./data` directory. There's no data-loss involved. You'll need to restart the bridge manually though (`--tags=start`).
## (BC Break) Telegram bridge configuration is now entirely managed by the playbook
Until now, configuration files for the [Telegram bridge](docs/configuring-playbook-bridge-mautrix-telegram.md) were created by the playbook initially, but never modified later on.
This means that if you were making manual changes to the `/matrix/mautrix-telegram/config.yaml` or `/matrix/mautrix-telegram/registration.yaml` configuration files, those would be lost the next time you run the playbook.
The bridge now stores configuration in a subdirectory (`/matrix/mautrix-telegram/config`), so your old configuration remains in the base directory (`/matrix/mautrix-telegram`).
You need to migrate any manual changes over to the new `matrix_mautrix_telegram_configuration_extension_yaml` variable, so that the playbook would apply them for you.
Likewise, data is now also stored in a subdirectory (`/matrix/mautrix-telegram/data`). When you run the playbook with an existing database file (`/matrix/mautrix-telegram/mautrix-telegram.db`), the playbook will stop the bridge and relocate the database file to the `./data` directory. There's no data-loss involved. You'll need to restart the bridge manually though (`--tags=start`).
Also, we're now following the default configuration for the Telegram bridge, so some default configuration values are different:
-`edits_as_replies` (used to be `false`, now `true`) - previously replies were not sent over to Matrix at all; ow they are sent over as a reply to the original message
-`inline_images` (used to be `true`, now `false`) - this has to do with captioned images. Inline-image (included caption) are said to exhibit troubles on Riot iOS. When `false`, the caption arrives on the Matrix side as a separate message.
-`authless_portals` (used to be `false`, now `true`) - creating portals from the Telegram side is now possible
-`whitelist_group_admins` (used to be `false`, now `true`) - allows Telegram group admins to use the bot commands
If the new values are not to your liking, use `matrix_mautrix_telegram_configuration_extension_yaml` to specify an override (refer to `matrix_mautrix_telegram_configuration_yaml` to figure out which variable goes where).
With [Synapse v1.0 now available](https://matrix.org/blog/2019/06/11/introducing-matrix-1-0-and-the-matrix-org-foundation) and most people being on at least Synapse v0.99, it's time to remove the `_matrix._tcp` DNS SRV record that we've been keeping for compatibility with old Synapse versions (<= 0.34).
According to the [Server Discovery specification](https://matrix.org/docs/spec/server_server/r0.1.2.html#server-discovery), it's no harm to keep the DNS SRV record. But since it's not necessary for federating with the larger Matrix network anymore, you should be safe to get rid of it.
**Note**: don't confuse the `_matrix._tcp` and `_matrix-identity._tcp` DNS SRV records. The latter, **must not** be removed.
For completeness, we must say that using a `_matrix._tcp` [SRV record for Server Delegation](docs/howto-server-delegation.md#server-delegation-via-a-dns-srv-record-advanced) is still valid and useful for certain deployments. It's just that our guide recommends the [`/.well-known/matrix/server` Server Delegation method](docs/howto-server-delegation.md#server-delegation-via-a-well-known-file), due to its easier implementation when using this playbook.
Besides this optional/non-urgent DNS change, assuming you're already on Synapse v0.99, upgrading to Synapse v1.0 should be as simple as [re-running the playbook](docs/maintenance-upgrading-services.md).
## (BC Break) Facebook bridge configuration is now entirely managed by the playbook
Until now, configuration files for the [Facebook bridge](docs/configuring-playbook-bridge-mautrix-facebook.md) were created by the playbook initially, but never modified later on.
This means that if you were making manual changes to the `/matrix/mautrix-facebook/config.yaml` or `/matrix/mautrix-facebook/registration.yaml` configuration files, those would be lost the next time you run the playbook.
The bridge now stores configuration in a subdirectory (`/matrix/mautrix-facebook/config`), so your old configuration remains in the base directory (`/matrix/mautrix-facebook`).
You need to migrate any manual changes over to the new `matrix_mautrix_facebook_configuration_extension_yaml` variable, so that the playbook would apply them for you.
Likewise, data is now also stored in a subdirectory (`/matrix/mautrix-facebook/data`). When you run the playbook with an existing database file (`/matrix/mautrix-facebook/mautrix-facebook.db`), the playbook will stop the bridge and relocate the database file to the `./data` directory. There's no data-loss involved. You'll need to restart the bridge manually though (`--tags=start`).
## Support for exposing container ports publicly (not just to the host)
Until now, various roles supported a `matrix_*_expose_port` variable, which would expose their container's port to the host. This was mostly useful for reverse-proxying manually (in case `matrix-nginx-proxy` was disabled). It could also be used for installing some playbook services (e.g. bridges, etc.) and wiring them to a separate (manual) Matrix setup.
`matrix_*_expose_port` variables were not granular enough - sometimes they would expose one port, other times multiple. They also didn't provide control over **where** to expose (to which port number and to which network interface), because they would usually hardcode something like `127.0.0.1:8080`.
All such variables have been superseded by a better (more flexible) way to do it.
**Most** people (including those not using `matrix-nginx-proxy`), **don't need** to bother with this.
Porting examples follow for people having more customized setups:
Thanks to [@danbob](https://github.com/danbob), the playbook now [supports the new Ansible 2.8](https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/187).
A manual change is required to the `inventory/hosts` file, changing the group name from `matrix-servers` to `matrix_servers` (dash to underscore).
The playbook no longer insists on installing [Synapse](https://github.com/matrix-org/synapse) via the `matrix-synapse` role.
If you would prefer to install Synapse another way and just use the playbook to install other services, it should be possible (`matrix_synapse_enabled: false`).
Note that it won't necessarily be the best experience, since the playbook wires things to Synapse by default.
If you're using your own Synapse instance (especially one not running in a container), you may have to override many variables to point them to the correct place.
Having Synapse not be a required component potentially opens the door for installing alternative Matrix homeservers.
## Bridges are now separate from the Synapse role
Bridges are no longer part of the `matrix-synapse` role.
Each bridge now lives in its own separate role (`roles/matrix-bridge-*`).
These bridge roles are independent of the `matrix-synapse` role, so it should be possible to use them with a Synapse instance installed another way (not through the playbook).
Besides a myriad of bug fixes and minor improvements, here are the more notable (bigger) features we can announce today.
## Mautrix Facebook/Messenger bridging support
The playbook now supports bridging with [Facebook](https://www.facebook.com/) by installing the [mautrix-facebook](https://github.com/tulir/mautrix-facebook) bridge. This playbook functionality is available thanks to [@izissise](https://github.com/izissise).
The playbook can now help you integrate with mxisd's [Registration](https://github.com/kamax-matrix/mxisd/blob/master/docs/features/registration.md) feature.
Learn more in [mxisd-controlled Registration](docs/configuring-playbook-mxisd.md#mxisd-controlled-registration).
# 2019-04-16
## Caddy webserver examples
If you prefer using the [Caddy](https://caddyserver.com/) webserver instead of our own integrated nginx, we now have examples for it in the [`examples/caddy`](examples/caddy) directory
# 2019-04-10
## Goofys support for other S3-compatible object stores
Until now, you could optionally host Synapse's media repository on Amazon S3, but we now also support [using other S3-compatible object stores](docs/configuring-playbook-s3.md),
Due to recent playbook improvements and the fact that the world keeps turning, we're bumping the [version requirement for Ansible](docs/ansible.md#supported-ansible-versions) (2.4 -> 2.5).
We've also started building our own Docker image of Ansible ([devture/ansible](https://hub.docker.com/r/devture/ansible/)), which is useful for people who can't upgrade their local Ansible installation (see [Using Ansible via Docker](docs/ansible.md#using-ansible-via-docker)).
People who have an extra firewall (besides the iptables firewall, which Docker manages automatically), will need to open these additional firewall ports: `5349/tcp` (TURN over TCP) and `5349/udp` (TURN over UDP).
People who build their own custom playbook from our roles should be aware that:
- the `matrix-coturn` role and actually starting Coturn (e.g. `--tags=start`), requires that certificates are already put in place. For this reason, it's usually a good idea to have the `matrix-coturn` role execute after `matrix-nginx-proxy` (which retrieves the certificates).
- there are a few variables that can help you enable TLS support for Coturn. See the `matrix-coturn` section in [group_vars/matrix-servers](./group_vars/matrix-servers).
## matrix-nginx-proxy support for serving the base domain
If you don't have a dedicated server for your base domain and want to set up [Server Delegation via a well-known file](docs/howto-server-delegation.md#server-delegation-via-a-well-known-file), the playbook has got you covered now.
It's now possible for the playbook to obtain an SSL certificate and serve the necessary files for Matrix Server Delegation on your base domain.
Take a look at the new [Serving the base domain](docs/configuring-playbook-base-domain-serving.md) documentation page.
## (BC break) matrix-nginx-proxy data variable renamed
`matrix_nginx_proxy_data_path` was renamed to `matrix_nginx_proxy_base_path`.
There's a new `matrix_nginx_proxy_data_path` variable, which has a different use-purpose now (it's a subdirectory of `matrix_nginx_proxy_base_path` and is meant for storing various data files).
Thanks to [NullIsNot0](https://github.com/NullIsNot0), the playbook can now (optionally) install the [Dimension](https://dimension.t2bot.io/) Integration Manager.
To learn more, see the [Setting up Dimension](docs/configuring-playbook-dimension.md) documentation page.
[@Lionstiger](https://github.com/Lionstiger) has done some great work adding Discord bridging support via [matrix-appservice-discord](https://github.com/Half-Shot/matrix-appservice-discord).
To learn more, see the [Setting up Appservice Discord bridging](docs/configuring-playbook-bridge-appservice-discord.md) documentation page.
However, we still provide you with hooks to install your own `home.html` file by specifying the `matrix_riot_web_embedded_pages_home_path` variable (used to be called `matrix_riot_web_homepage_template` before).
As we're moving toward Synapse v1.0, things are beginning to stabilize.
Upgrading from v0.99.0 to v0.99.1 should be painless.
If you've been overriding the default configuration so that you can terminate TLS at the Synapse side (`matrix_synapse_no_tls: false`), you'll now have to replace this custom configuration with `matrix_synapse_tls_federation_listener_enabled: true`. The `matrix_synapse_no_tls` variable is no more.
## Synapse v0.99 support and preparation for Synapse v1.0
Matrix is undergoing a lot of changes as it matures towards Synapse v1.0.
The first step is the Synapse v0.99 transitional release, which this playbook now supports.
If you've been using this playbook successfully until now, you'd be aware that we've been doing [Server Delegation](docs/howto-server-delegation.md) using a `_matrix._tcp` DNS SRV record (as per [Configuring DNS](docs/configuring-dns.md)).
Due to changes related to certificate file requirements that will affect us at Synapse v1.0, we'll have to stop using a **`_matrix._tcp` DNS SRV record in the future** (when Synapse goes to v1.0 - around 5th of March 2019). We **still need to keep the SRV record for now**, for backward compatibility with older Synapse versions (lower than v0.99).
**What you need to do now** is make use of this transitional Synapse v0.99 release to **prepare your federation settings for the future**. You have 2 choices to prepare yourself for compatibility with the future Synapse v1.0:
- (recommended) set up [Server Delegation via a well-known file](docs/howto-server-delegation.md#server-delegation-via-a-well-known-file), unless you are affected by the [Downsides of well-known-based Server Delegation](docs/howto-server-delegation.md#downsides-of-well-known-based-server-delegation). If you had previously set up the well-known `client` file, depending on how you've done it, it may be that there is nothing new required of you (besides [upgrading](docs/maintenance-upgrading-services.md)). After upgrading, you can [run a self-check](docs/maintenance-checking-services.md), which will tell you if you need to do anything extra with regard to setting up [Server Delegation via a well-known file](docs/howto-server-delegation.md#server-delegation-via-a-well-known-file). After some time, when most people have upgraded to Synapse v0.99 and older releases have disappeared, be prepared to drop your `_matrix._tcp` SRV record.
- (more advanced) if the [Downsides of well-known-based Server Delegation](docs/howto-server-delegation.md#downsides-of-well-known-based-server-delegation) are not to your liking, **as an alternative**, you can set up [Server Delegation via a DNS SRV record](docs/howto-server-delegation.md#server-delegation-via-a-dns-srv-record-advanced). In such a case, you get to keep using your existing `_matrix._tcp` DNS SRV record forever and need to NOT set up a `/.well-known/matrix/server` file. Don't forget that you need to do certificate changes though. Follow the guide at [Server Delegation via a DNS SRV record](docs/howto-server-delegation.md#server-delegation-via-a-dns-srv-record-advanced).
Now that the [nginx Docker image](https://hub.docker.com/_/nginx) has [added support for TLS v1.3](https://github.com/nginxinc/docker-nginx/issues/190), we have enabled that protocol by default.
When using:
- the **integrated nginx server**: TLS v1.3 support might not kick in immediately, because the nginx version hasn't been bumped and you may have an older build of the nginx Docker image (currently `nginx:1.15.8-alpine`). Typically, we do not re-pull images that you already have. When the nginx version gets bumped in the future, everyone will get the update. Until then, you could manually force-pull the rebuilt Docker image by running this on the server: `docker pull nginx:1.15.8-alpine`.
- **your own external nginx server**: if your external nginx server is too old, the new configuration we generate for you in `/matrix/nginx-proxy/conf.d/` might not work anymore, because it mentions `TLSv1.3` and your nginx version might not support that. You can adjust the SSL protocol list by overriding the `matrix_nginx_proxy_ssl_protocols` variable. Learn more in the documentation page for [Using your own webserver, instead of this playbook's nginx proxy](docs/configuring-playbook-own-webserver.md)
- **another web server**: you don't need to do anything to accommodate this change
[Devon Maloney (@Plailect)](https://github.com/Plailect) has done some great work bringing IRC bridging support via [matrix-appservice-irc](https://github.com/TeDomum/matrix-appservice-irc).
To learn more, see the [Setting up Appservice IRC](docs/configuring-playbook-bridge-appservice-irc.md) documentation page.
For additional security, various capabilities are also dropped (see [why it's important](https://github.com/projectatomic/atomic-site/issues/203)) for all containers.
Additionally, most containers now use a read-only filesystem (see [why it's important](https://www.projectatomic.io/blog/2015/12/making-docker-images-write-only-in-production/)).
Containers are given write access only to the directories they need to write to.
A minor breaking change is the `matrix_nginx_proxy_proxy_matrix_client_api_client_max_body_size` variable having being renamed to `matrix_nginx_proxy_proxy_matrix_client_api_client_max_body_size_mb` (note the `_mb` suffix). The new variable expects a number value (e.g. `25M` -> `25`).
If you weren't customizing this variable, this wouldn't affect you.
## matrix-mailer is now based on Exim, not Postfix
While we would have preferred to stay with [Postfix](http://www.postfix.org/), we found out that it cannot run as a non-root user.
We've had to replace it with [Exim](https://www.exim.org/) (via the [devture/exim-relay](https://hub.docker.com/r/devture/exim-relay) container image).
The internal `matrix-mailer` service (running in a container) now listens on port `8025` (used to be `587` before).
The playbook will update your Synapse and mxisd email settings to match (`matrix-mailer:587` -> `matrix-mailer:8025`).
Using the [devture/exim-relay](https://hub.docker.com/r/devture/exim-relay) container image instead of [panubo/postfix](https://hub.docker.com/r/panubo/postfix/) also gives us a nice disk usage reduction (~200MB -> 8MB).
## (BC Break) Making the playbook's roles more independent of one another
The following change **affects people running a more non-standard setup** - external Postgres or using our roles in their own other playbook.
**Most users don't need to do anything**, besides becoming aware of the new glue variables file [`group_vars/matrix-servers`](group_vars/matrix-servers).
Because people like using the playbook's components independently (outside of this playbook) and because it's much better for maintainability, we've continued working on separating them.
Still, we'd like to offer a turnkey solution for running a fully-featured Matrix server, so this playbook remains important for wiring up the various components.
- glue variables had to be introduced to the playbook, so it can wire together the various components. Those glue vars are stored in the [`group_vars/matrix-servers`](group_vars/matrix-servers) file. When overriding variables for a given component (role), you need to be aware of both the role defaults (`role/ROLE/defaults/main.yml`) and the role's corresponding section in the [`group_vars/matrix-servers`](group_vars/matrix-servers) file.
-`matrix_postgres_use_external` has been superceeded by the more consistently named `matrix_postgres_enabled` variable and a few other `matrix_synapse_database_` variables. See the [Using an external PostgreSQL server (optional)](docs/configuring-playbook-external-postgres.md) documentation page for an up-to-date replacement.
- Postgres tools (`matrix-postgres-cli` and `matrix-make-user-admin`) are no longer installed if you're not enabling the `matrix-postgres` role (`matrix_postgres_enabled: false`)
- roles, being more independent now, are more minimal and do not do so much magic for you. People that are building their own playbook using our roles will definitely need to take a look at the [`group_vars/matrix-servers`](group_vars/matrix-servers) file and adapt their playbooks with the same (or similar) wiring logic.
For better maintainability, the playbook logic (which all used to reside in a single `matrix-server` role)
has been split out into a number of different roles: `matrix-synapse`, `matrix-postgres`, `matrix-riot-web`, `matrix-mxisd`, etc. (see the `roles/` directory).
To keep the filesystem more consistent with this separation, the **Postgres data had to be relocated**.
The default value of `matrix_postgres_data_path` was changed from `/matrix/postgres` to `/matrix/postgres/data`. The `/matrix/postgres` directory is what we consider a base path now (new variable `matrix_postgres_base_path`). **Your Postgres data files will automatically be relocated by the playbook** (`/matrix/postgres/*` -> `/matrix/postgres/data/`) when you run with `--tags=setup-all` (or `--tags=setup-postgres`). While this shouldn't cause data-loss, **it's better if you do a Postgres backup just in case**. You'd need to restart all services after this migration (`--tags=start`).
## (BC Break) Cronjob schedule no longer configurable
Due to the way we manage cronjobs now, you can no longer configure the schedule they're invoked at.
If you were previously using `matrix_ssl_lets_encrypt_renew_cron_time_definition` or `matrix_nginx_proxy_reload_cron_time_definition`
to set a custom schedule, you should note that these variables don't affect anything anymore.
If you miss this functionality, please [open an Issue](https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/new) and let us know about your use case!
## (BC Break) mxisd upgrade with multiple base DN support
mxisd has bee upgraded to [version 1.2.2](https://github.com/kamax-matrix/mxisd/releases/tag/v1.2.2), which supports [multiple base DNs](https://github.com/kamax-matrix/mxisd/blob/v1.2.2/docs/stores/ldap.md#base).
If you were configuring this playbook's `matrix_mxisd_ldap_connection_baseDn` variable until now (a string containing a single base DN), you'll need to change to configuring the `matrix_mxisd_ldap_connection_baseDns` variable (an array containing multiple base DNs).
The [LDAP identity store for mxisd](https://github.com/kamax-matrix/mxisd/blob/master/docs/stores/ldap.md) can now be configured easily using playbook variables (see the `matrix_mxisd_ldap_` variables in `roles/matrix-server/defaults/main.yml`).
The playbook now allows you to set the log levels used by Synapse. The default logging levels remain the same.
You can now override following variables with any of the supported log levels listed here: https://docs.python.org/3/library/logging.html#logging-levels
This now allows you use a custom integrations manager like [Dimesion](https://dimension.t2bot.io). For example, if you wish to use the Dimension instance hosted at dimension.t2bot.io, you can set the following in your vars.yml file:
There's now a new `matrix_nginx_proxy_ssl_protocols` playbook variable, which controls the SSL protocols used to serve Riot and Synapse. Its default value is `TLSv1.1 TLSv1.2`. This playbook previously used `TLSv1 TLSv1.1 TLSv1.2` to serve Riot and Synapse.
If you have have an existing setup, it's likely running on an older Postgres version (9.x or 10.x). You can easily upgrade by following the [upgrading PostgreSQL guide](docs/maintenance-postgres.md#upgrading-postgresql).
Due to the large amount of features added to this playbook lately, to keep things manageable we've had to reorganize its configuration variables a bit.
The following playbook variables were renamed:
- from `matrix_docker_image_mxisd` to `matrix_mxisd_docker_image`
- from `matrix_docker_image_mautrix_telegram` to `matrix_mautrix_telegram_docker_image`
- from `matrix_docker_image_mautrix_whatsapp` to `matrix_mautrix_whatsapp_docker_image`
- from `matrix_docker_image_mailer` to `matrix_mailer_docker_image`
- from `matrix_docker_image_coturn` to `matrix_coturn_docker_image`
- from `matrix_docker_image_goofys` to `matrix_s3_goofys_docker_image`
- from `matrix_docker_image_riot` to `matrix_riot_web_docker_image`
- from `matrix_docker_image_nginx` to `matrix_nginx_proxy_docker_image`
- from `matrix_docker_image_synapse` to `matrix_synapse_docker_image`
- from `matrix_docker_image_postgres_v9` to `matrix_postgres_docker_image_v9`
- from `matrix_docker_image_postgres_v10` to `matrix_postgres_docker_image_v10`
- from `matrix_docker_image_postgres_latest` to `matrix_postgres_docker_image_latest`
The playbook now supports bridging with [Whatsapp](https://www.whatsapp.com/) by installing the [mautrix-whatsapp](https://github.com/tulir/mautrix-whatsapp) bridge. This playbook functionality is available thanks to [@izissise](https://github.com/izissise).
Additional details are available in [Setting up Mautrix Whatsapp bridging](docs/configuring-playbook-bridge-mautrix-whatsapp.md).
The playbook can now help you with [Controlling Matrix federation](docs/configuring-playbook-federation), should you wish to run a more private (isolated) server.
The playbook can now enable/disable user presence-status tracking in Synapse, through the playbook's `matrix_synapse_use_presence` variable (having a default value of `true` - enabled).
If users participate in large rooms with many other servers, disabling presence will decrease server load significantly.
The playbook now makes the Synapse cache factor configurable, through the playbook's `matrix_synapse_cache_factor` variable (having a default value of `0.5`).
Changing that value allows you to potentially decrease RAM usage or to increase performance by caching more stuff.
Some information on it is available here: https://github.com/matrix-org/synapse#help-synapse-eats-all-my-ram
`--log-driver=none` is used for all Docker containers now.
All these containers are started through systemd anyway and get logged in journald, so there's no need for Docker to be logging the same thing using the default `json-file` driver. Doing that was growing `/var/lib/docker/containers/..` infinitely until service/container restart.
As a result of this, things like `docker logs matrix-synapse` won't work anymore. `journalctl -u matrix-synapse` is how one can see the logs.
The playbook now helps you set up [service discovery](https://matrix.org/docs/spec/client_server/r0.4.0.html#server-discovery) using a `/.well-known/matrix/client` file.
Additional details are available in [Configuring service discovery via .well-known](docs/configuring-well-known.md).
The playbook now supports bridging with [Telegram](https://telegram.org/) by installing the [mautrix-telegram](https://github.com/tulir/mautrix-telegram) bridge. This playbook functionality is available thanks to [@izissise](https://github.com/izissise).
Additional details are available in [Setting up Mautrix Telegram bridging](docs/configuring-playbook-bridge-mautrix-telegram.md).
The playbook now supports enabling password-peppering for increased security in Matrix Synapse via the `matrix_synapse_password_config_pepper` playbook variable. Using a password pepper is disabled by default (just like it used to be before this playbook variable got introduced) and is not to be enabled/disabled after initial setup, as that would invalidate all existing passwords.
## Statistics-reporting support for Matrix Synapse
There's now a new `matrix_synapse_report_stats` playbook variable, which controls the `report_stats` configuration option for Matrix Synapse. It defaults to `false`, so no change is required to retain your privacy.
If you'd like to start reporting statistics about your homeserver (things like number of users, number of messages sent, uptime, load, etc.) to matrix.org, you can turn on stats reporting.
## Changing the way SSL certificates are retrieved
We've been using [acmetool](https://github.com/hlandau/acme) (with the [willwill/acme-docker](https://hub.docker.com/r/willwill/acme-docker/) Docker image) until now.
Due to the Docker image being deprecated, and things looking bleak for acmetool's support of the newer ACME v2 API endpoint, we've switched to using [certbot](https://certbot.eff.org/) (with the [certbot/certbot](https://hub.docker.com/r/certbot/certbot/) Docker image).
Changed the way the Docker containers are linked together. The ones that need to communicate with others operate in a `matrix` network now and not in the default bridge network.
