* Draupnir for all Role
* Draupnir for all Documentation
* Pin D4A to Develop until D4A patches are in a release.
* Update D4A Docs to mention pros and cons of D4A mode compared to normal
* Change Documentation to mention a fixed simpler provisioning flow.
Use of /plain allows us to bypass the bugs encountered during the development of this role with clients attempting to escape our wildcards causing the grief that led to using curl.
This reworded commit does still explain you can automatically inject stuff into the room if you wanted to.
* Emphasise the State of D4A mode
* Link to Draupnir-for-all docs and tweak the docs some
* Link to Draupnir-for-all from Draupnir documentation page
* Announce Draupnir-for-all
---------
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
This was meant to serve as an intermediary for services needing to reach
the homeserver. It was used like that for a while in this
`bye-bye-nginx-proxy` branch, but was never actually public.
It has recently been superseded by homeserver-like services injecting
themselves into a new internal Traefik entrypoint
(see `matrix_playbook_internal_matrix_client_api_traefik_entrypoint_*`),
so `matrix-homeserver-proxy` is no longer necessary.
---
This is probably a good moment to share some benchmarks and reasons
for going with the internal Traefik entrypoint as opposed to this nginx
service.
1. (1400 rps) Directly to Synapse (`ab -n 1000 -c 100 http://matrix-synapse:8008/_matrix/client/versions`
2. (~900 rps) Via `matrix-homeserver-proxy` (nginx) proxying to Synapse (`ab -n 1000 -c 100 http://matrix-homeserver-proxy:8008/_matrix/client/versions`)
3. (~1200 rps) Via the new internal entrypoint of Traefik (`matrix-internal-matrix-client-api`) proxying to Synapse (`ab -n 1000 -c 100 http://matrix-traefik:8008/_matrix/client/versions`)
Besides Traefik being quicker for some reason, there are also other
benefits to not having this `matrix-homeserver-proxy` component:
- we can reuse what we have in terms of labels. Services can register a few extra labels on the new Traefik entrypoint
- we don't need services (like `matrix-media-repo`) to inject custom nginx configs into `matrix-homeserver-proxy`. They just need to register labels, like they do already.
- Traefik seems faster than nginx on this benchmark for some reason, which is a nice bonus
- no need to run one extra container (`matrix-homeserver-proxy`) and execute one extra Ansible role
- no need to maintain a setup where some people run the `matrix-homeserver-proxy` component (because they have route-stealing services like `matrix-media-repo` enabled) and others run an optimized setup without this component and everything needs to be rewired to talk to the homeserver directly. Now, everyone can go through Traefik and we can all run an identical setup
Downsides of the new Traefik entrypoint setup are that:
- all addon services that need to talk to the homeserver now depend on Traefik
- people running their own Traefik setup will be inconvenienced - they
need to manage one additional entrypoint
This is still very far from usable.
Various bridges and bots are still talking to
`matrix-nginx-proxy` instead of the new `matrix-homeserver-proxy` role.
These services need to be reworked. While reworking them,
various cleanups are being done as well as adding Traefik-labels to
those that need them.
* Inital work, copeid from mautrix-amp PR
* Some fixes leftover code copeid over from whatsapp
* Got it to run and register
* Fixed service issue with docker image
* I now realize I need 2 roles wsproxy and imessage
* Got someting working, still rough
* Closer to working but still not working
* reverting ports
* Update main.yml
* Add matrix-nginx-proxy config for mautrix-wsproxy
* Changed
* Add back file
* fix for error hopefully
* Changed the the way nginx was recieved
* basically did not add anything ugh
* Added some arguments
* just trying stuff now
* Ugh i messed up port number
* Changed docs
* Change dns config
* changed generic secret key
* Testing new nginx proxy
* test
* Fix linting errors
* Add mautrix syncproxy to wsproxy for Android SMS
* WIP
* Move wsproxy to custom
* Squashed commit of the following:
commit 943189a9aa
Merge: 4a229d68f5a09f30
Author: Slavi Pantaleev <slavi@devture.com>
Date: Sun Nov 13 08:54:32 2022 +0200
Merge pull request #2259 from throny/patch-3
warn users about upgrading to pg15 when using borg
commit 4a229d6870
Merge: 9b326e08c68def08
Author: Slavi Pantaleev <slavi@devture.com>
Date: Sun Nov 13 08:53:13 2022 +0200
Merge pull request #2260 from etkecc/patch-117
Update ntfy 1.28.0 -> 1.29.0
commit f5a09f30b7
Author: throny <m.throne12@gmail.com>
Date: Sat Nov 12 23:48:57 2022 +0100
Update maintenance-postgres.md
commit b12cdbd99d
Author: throny <m.throne12@gmail.com>
Date: Sat Nov 12 23:40:46 2022 +0100
Update maintenance-postgres.md
commit c68def0809
Author: Aine <97398200+etkecc@users.noreply.github.com>
Date: Sat Nov 12 22:01:31 2022 +0000
Update ntfy 1.28.0 -> 1.29.0
commit adbc09f152
Author: throny <m.throne12@gmail.com>
Date: Sat Nov 12 11:20:43 2022 +0100
warn users about upgrading to pg15 when using borg
* Fix linting errors
* Cleanup after merge
* Correct outdated variable names
* Enable both Android and iMessage with wsproxy
* Restructure wsproxy service defs and nginx config
* Fix linter errors
* Apply suggestions from code review
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Fix comments for documentation, volumes and ports
* Correct mount syntax
* Complete network and traefik support for wsproxy
* Remove wsproxy data_path
* Fix wsproxy service definitions
* Actually include syncproxy service
* Remove wsproxy PathPrefix, it needs a subdomain
There's no setting in the iMessage bridge that allows a path.
Also don't bind port by default, wsproxy has no TLS.
Syncproxy should never expose a port, it's only internal.
---------
Co-authored-by: hanthor <jreilly112@gmail.com>
Co-authored-by: Miguel Alatzar <miguel@natrx.io>
Co-authored-by: Shreyas Ajjarapu <github.tzarina@aleeas.com>
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* intial commit
* changed
* Reorderd
* merge old changes
* added changes to matrix_servers
* Remove duplicate discord
* Update main.yml
* added google message to configuring-playbook.md
* Changed docs to add new changes
* Changed bug?
* Removed problem j2 values
* Rename a service files
* change how password hash string
* Changed port number
* Change how the local part works
* Revert "Merge pull request #8 from shreyasajj/wsproxy"
This reverts commit bb1b8fc67c, reversing
changes made to cce6ba5f9d.
---------
Co-authored-by: Shreyas Ajjarapu <github.tzarina@aleeas.com>
Some time ago a "playbooks" subdirectory had been created and setup.yml
had been moved there (as matrix.yml), together with the new
jitsi_jvb.yml. However, jitsi_jvb.yml wouldn't work at all, unless a
symbolic link to it was created from the root directory. A symbolic link
setup.yml for playbooks/matrix.yml had already been created and
committed.
This seems to indicate that the developers thought they should place all
playbooks in a subdirectory, but when this didn't work, they linked to
one of them, leaving the other one inoperative. We fix this by moving
the playbooks to the root directory. This works, and the pollution of
the root directory is not too bad since it's only two playbooks.
We also change the mode of setup.yml to 644 (it had inexplicably changed
to 755 in 9735a2f600).
This contribution is provided by GRNET S.A. (grnet.gr).
* Add task to configure a standalone JVB on a different server
* add missing file
* set nginx config
* update prosody file and expose port 5222
* change variable name to server id
* formatting change
* use server id of jvb-1 for the main server
* adding documentation
* adding more jvbs
* rename variable
* revert file
* fix yaml error
* minor doc fixes
* renaming tags and introducing a common tag
* remove duplicates
* add mapping for jvb to hostname/ip
* missed a jvb_server
* Update roles/matrix-nginx-proxy/templates/nginx/conf.d/matrix-jitsi.conf.j2
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* PR review comments and additional documentation
* iterate on dict items
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* adding documentation around the xmpp setting
* add common after
* reduce the number of services during init of the additional jvb
* remove rogue i
* revert change to jitsi init as it's needed
* only run the jvb service on the additional jvb host
* updating docs
* reset default and add documentation about the websocket port
* fix issue rather merge with master
* add missing role introduced in master
* this role is required too
* Adding new jitsi jvb playbook, moving setup.yml to matrix.yml and creating soft link
* updating documentation
* revert accidental change to file
* add symlink back to roles to aid running of the jitsi playbook
* Remove extra space
* Delete useless playbooks/roles symlink
* Remove blank lines
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
With this change, trying to run the playbook should report an error that
looks like this:
> The offending line appears to be:
>
> # Most of the roles below are not distributed with the playbook, but downloaded separately using `ansible-galaxy` via the `make roles` command (see `Makefile`).
> - role: galaxy/com.devture.ansible.role.playbook_help
> ^ here
.. with that comment included, which might help some people who missed
the `make roles` part.
Improves https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/2232
We no longer ask users to create Matrix user accounts for these bots:
- Postmoogle
- Honoroit
- Reminder Bot
Other bots and services (matrix-registration-bot, maubot, mjolnir,
Dimension, etc.) require an Access Token to run (not a password),
so this new role doesn't help for them.
It does help for the above bots though, and for defining your own
"initial user accounts" in the `matrix_user_creator_users_additional`
variable.
* Add construct for cactus comments role
* Adjust config files
* Add docker self build to defaults
* Adjust tasks
* Fix smaller syntax errors
* Fix env argument
* Add tmp path to allow container writing there
Background why I did this: https://docs.gunicorn.org/en/stable/settings.html#worker-tmp-dir
* Change port back to 5000 as not configurable in container
* Try to add appservice config file for synapse to use
* Inject appservice file
* Correct copied variable name
* Comment out unused app service file injection
would need mounting the appservice file to the synapse container i guess
* Move role before synapse to be able to inject during runtime
* Remove unused parts
* Change default user id to mirror official docs
* Add docs
* Update roles/matrix-cactus-comments/tasks/setup_install.yml
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update roles/matrix-cactus-comments/templates/cactus_appservice.yaml.j2
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Generate secrets if necessary, adjust docs
* Rename cactusbot userid
* Shorten salt strings
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Use tmpfs instead of persistent mount
* Remove proxy option as it is nonsense
* Add download and serving of cc-client files
* Add documentation on client
* Clarify docs a bit
* Add nginx proxy to required services
Signed-off-by: Julian-Samuel Gebühr <julian-samuel@gebuehr.net>
* Use container address
Signed-off-by: Julian-Samuel Gebühr <julian-samuel@gebuehr.net>
* Correct comment of user id
Signed-off-by: Julian-Samuel Gebühr <julian-samuel@gebuehr.net>
* Use releases or local distributed client
Signed-off-by: Julian-Samuel Gebühr <julian-samuel@gebuehr.net>
* Move homeserver url to defaults
Signed-off-by: Julian-Samuel Gebühr <julian-samuel@gebuehr.net>
* Correct truth value
Signed-off-by: Julian-Samuel Gebühr <julian-samuel@gebuehr.net>
* Add documentation of variables
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Tabs vs. spaces
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Make nginx root configurable
Signed-off-by: Julian-Samuel Gebühr <julian-samuel@gebuehr.net>
* Complete ake nginx root configurable
Signed-off-by: Julian-Samuel Gebühr <julian-samuel@gebuehr.net>
* Fix file permission
Signed-off-by: Julian-Samuel Gebühr <julian-samuel@gebuehr.net>
* Fix lint errors
Signed-off-by: Julian-Samuel Gebühr <julian-samuel@gebuehr.net>
Signed-off-by: Julian-Samuel Gebühr <julian-samuel@gebuehr.net>
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
Adds support for: https://src.miscworks.net/fair/matrix-appservice-kakaotalk
This is pretty similar to
https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/1977
which just appeared, but has mostly been done independently.
I've taken some inspiration and did some fixups based on that PR.
Thanks to https://github.com/hnarjis for taking the time to contribute!
Notable differences between this branch compared to that PR:
- better naming and documentation around the "configuration" variables
- no unnecessary (5 sec.) intentional delay when starting `matrix-appservice-kakaotalk-node.service`
- stores configuration in `config/`, not in `data/`
- passes configuration as read-only and starts the bridge with (`--no-update`) to ensure no changes are made to it
- starts containers more securely - with `matrix:matrix` user:group (not `root`) and
reduced capabilities (`--cap-drop=ALL`)
- uses `tcp` for communication between the "node" and the appservice (simpler than sharing unix sockets)
- `registration.yaml` which is closer to the one generated by `matrix-appservice-kakaotalk` (no `de.sorunome.msc2409.push_ephemeral` stuff, etc.)
- `registration.yaml` which is more customizable (customizable bot username and prefix for puppets - see `matrix_appservice_kakaotalk_appservice_bot_username` and `matrix_appservice_kakaotalk_user_prefix`)
- less fragile and more extensible bridge permissions configuration via `matrix_appservice_kakaotalk_bridge_permissions`. Doing `{% if matrix_admin %}` in the bridge configuration sometimes causes syntax problems (I hit some myself) and is not ideal. Other bridges should be redone as well.
- configurable command prefix for the bridge, instead of hardcoding `!kt` (see `matrix_appservice_kakaotalk_command_prefix`)
- logging that is more consistent with the rest of the playbook (console / journald only, no logging to files), as well as configurable log level (via `matrix_appservice_kakaotalk_logging_level`)
- somewhat more detailed documentation (`docs/configuring-playbook-bridge-appservice-kakaotalk.md`)
- removed some dead code (data relocation tasks from `tasks/setup_install.yml`, as well as likely unnecessary SQLite -> Postgres migration)
This commit adds a 'matrix-ntfy' role that runs Ntfy server in Docker with
simple configuration, and plumbing to add the role to the playbook.
TODO: documentation, self-check, database persistence.
* Add matrix-registration-bot
This adds an install and uninstall task plus helpers. The bot is disabled by default.
This commit does not include documentation, yet. In short, the bot can be enabled by adding
matrix_bot_matrix_registration_bot_enabled: true
matrix_bot_matrix_registration_bot_matrix_user_password: "verysecret"
matrix_bot_matrix_registration_bot_matrix_admin_token: "supersecret"
to the host_vars
* Change bot username to bot.matrix-registration-bot following convention
* Address smaller remarks, fix local docker build
* Switch to an env file
* Add environment variables extension for additional config
* Add documentation for the matrix-registration-bot
* Add screenshot on how to obtain admin access token
* Use bot as admin to only have one access token (bot and admin api)
* Use cleaner setting of matrix_synapse_registration_requires_token
* Use config file for cleaner more secure usage
* Delete unneeded env
* Rename vars to make usage clear
* Fix typos/wording and add notice about logging out
* Convert configuration to use |to_json
* Reorder role includes
Nothing should be after `matrix-common-after`.
`matrix-bot-matrix-registration-bot` can probably be anywhere, but it makes sense to put it next to the other `matrix-bot-*` roles.
* Minor group_vars/matrix_servers touchups
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
