virtualenv/FFmpeg
1
0
Fork 0
mirror of https://github.com/FFmpeg/FFmpeg.git synced 2024-12-12 19:18:44 +02:00
Code Issues Releases Activity
09cd147dcc
FFmpeg/libavutil/x86/tx_float_init.c

253 lines
11 KiB
C
Raw Normal View History

lavu/x86: add FFT assembly This commit adds a pure x86 assembly SIMD version of the FFT in libavutil/tx. The design of this pure assembly FFT is pretty unconventional. On the lowest level, instead of splitting the complex numbers into real and imaginary parts, we keep complex numbers together but split them in terms of parity. This saves a number of shuffles in each transform, but more importantly, it splits each transform into two independent paths, which we process using separate registers in parallel. This allows us to keep all units saturated and lets us use all available registers to avoid dependencies. Moreover, it allows us to double the granularity of our per-load permutation, skipping many expensive lookups and allowing us to use just 4 loads per register, rather than 8, or in case FMA3 (and by extension, AVX2), use the vgatherdpd instruction, which is at least as fast as 4 separate loads on old hardware, and quite a bit faster on modern CPUs). Higher up, we go for a bottom-up construction of large transforms, foregoing the traditional per-transform call-return recursion chains. Instead, we always start at the bottom-most basis transform (in this case, a 32-point transform), and continue constructing larger and larger transforms until we return to the top-most transform. This way, we only touch the stack 3 times per a complete target transform: once for the 1/2 length transform and two times for the 1/4 length transform. The combination algorithm we use is a standard Split-Radix algorithm, as used in our C code. Although a version with less operations exists (Steven G. Johnson and Matteo Frigo's "A modified split-radix FFT with fewer arithmetic operations", IEEE Trans. Signal Process. 55 (1), 111–119 (2007), which is the one FFTW uses), it only has 2% less operations and requires at least 4x the binary code (due to it needing 4 different paths to do a single transform). That version also has other issues which prevent it from being implemented with SIMD code as efficiently, which makes it lose the marginal gains it offered, and cannot be performed bottom-up, requiring many recursive call-return chains, whose overhead adds up. We go through a lot of effort to minimize load/stores by keeping as much in registers in between construcring transforms. This saves us around 32 cycles, on paper, but in reality a lot more due to load/store aliasing (a load from a memory location cannot be issued while there's a store pending, and there are only so many (2 for Zen 3) load/store units in a CPU). Also, we interleave coefficients during the last stage to save on a store+load per register. Each of the smallest, basis transforms (4, 8 and 16-point in our case) has been extremely optimized. Our 8-point transform is barely 20 instructions in total, beating our old implementation 8-point transform by 1 instruction. Our 2x8-point transform is 23 instructions, beating our old implementation by 6 instruction and needing 50% less cycles. Our 16-point transform's combination code takes slightly more instructions than our old implementation, but makes up for it by requiring a lot less arithmetic operations. Overall, the transform was optimized for the timings of Zen 3, which at the time of writing has the most IPC from all documented CPUs. Shuffles were preferred over arithmetic operations due to their 1/0.5 latency/throughput. On average, this code is 30% faster than our old libavcodec implementation. It's able to trade blows with the previously-untouchable FFTW on small transforms, and due to its tiny size and better prediction, outdoes FFTW on larger transforms by 11% on the largest currently supported size.
2021-04-10 03:54:22 +02:00
/*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#define TX_FLOAT
#include "libavutil/tx_priv.h"
#include "libavutil/attributes.h"
#include "libavutil/x86/cpu.h"
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 08:14:46 +02:00
#include "config.h"
lavu/x86: add FFT assembly This commit adds a pure x86 assembly SIMD version of the FFT in libavutil/tx. The design of this pure assembly FFT is pretty unconventional. On the lowest level, instead of splitting the complex numbers into real and imaginary parts, we keep complex numbers together but split them in terms of parity. This saves a number of shuffles in each transform, but more importantly, it splits each transform into two independent paths, which we process using separate registers in parallel. This allows us to keep all units saturated and lets us use all available registers to avoid dependencies. Moreover, it allows us to double the granularity of our per-load permutation, skipping many expensive lookups and allowing us to use just 4 loads per register, rather than 8, or in case FMA3 (and by extension, AVX2), use the vgatherdpd instruction, which is at least as fast as 4 separate loads on old hardware, and quite a bit faster on modern CPUs). Higher up, we go for a bottom-up construction of large transforms, foregoing the traditional per-transform call-return recursion chains. Instead, we always start at the bottom-most basis transform (in this case, a 32-point transform), and continue constructing larger and larger transforms until we return to the top-most transform. This way, we only touch the stack 3 times per a complete target transform: once for the 1/2 length transform and two times for the 1/4 length transform. The combination algorithm we use is a standard Split-Radix algorithm, as used in our C code. Although a version with less operations exists (Steven G. Johnson and Matteo Frigo's "A modified split-radix FFT with fewer arithmetic operations", IEEE Trans. Signal Process. 55 (1), 111–119 (2007), which is the one FFTW uses), it only has 2% less operations and requires at least 4x the binary code (due to it needing 4 different paths to do a single transform). That version also has other issues which prevent it from being implemented with SIMD code as efficiently, which makes it lose the marginal gains it offered, and cannot be performed bottom-up, requiring many recursive call-return chains, whose overhead adds up. We go through a lot of effort to minimize load/stores by keeping as much in registers in between construcring transforms. This saves us around 32 cycles, on paper, but in reality a lot more due to load/store aliasing (a load from a memory location cannot be issued while there's a store pending, and there are only so many (2 for Zen 3) load/store units in a CPU). Also, we interleave coefficients during the last stage to save on a store+load per register. Each of the smallest, basis transforms (4, 8 and 16-point in our case) has been extremely optimized. Our 8-point transform is barely 20 instructions in total, beating our old implementation 8-point transform by 1 instruction. Our 2x8-point transform is 23 instructions, beating our old implementation by 6 instruction and needing 50% less cycles. Our 16-point transform's combination code takes slightly more instructions than our old implementation, but makes up for it by requiring a lot less arithmetic operations. Overall, the transform was optimized for the timings of Zen 3, which at the time of writing has the most IPC from all documented CPUs. Shuffles were preferred over arithmetic operations due to their 1/0.5 latency/throughput. On average, this code is 30% faster than our old libavcodec implementation. It's able to trade blows with the previously-untouchable FFTW on small transforms, and due to its tiny size and better prediction, outdoes FFTW on larger transforms by 11% on the largest currently supported size.
2021-04-10 03:54:22 +02:00
lavu/tx: refactor assembly codelet definition This commit does some refactoring to make defining assembly codelets smaller, and fixes compiler redefinition warnings. It also allows for other assembly versions to reuse the same boilerplate code as x86. Finally, it also adds the out_of_place flag to all assembly codelets. This changes nothing, as out-of-place operation was assumed to be available anyway, but this makes it more explicit.
2022-02-07 04:30:27 +02:00
TX_DECL_FN(fft2, sse3)
TX_DECL_FN(fft4_fwd, sse2)
TX_DECL_FN(fft4_inv, sse2)
TX_DECL_FN(fft8, sse3)
TX_DECL_FN(fft8_ns, sse3)
TX_DECL_FN(fft8, avx)
TX_DECL_FN(fft8_ns, avx)
TX_DECL_FN(fft16, avx)
TX_DECL_FN(fft16_ns, avx)
TX_DECL_FN(fft16, fma3)
TX_DECL_FN(fft16_ns, fma3)
TX_DECL_FN(fft32, avx)
TX_DECL_FN(fft32_ns, avx)
TX_DECL_FN(fft32, fma3)
TX_DECL_FN(fft32_ns, fma3)
x86/tx_float: enable AVX-only split-radix FFT codelets Sandy Bridge, Ivy Bridge and Bulldozer cores don't support FMA3.
2022-09-24 03:51:48 +02:00
TX_DECL_FN(fft_sr, avx)
TX_DECL_FN(fft_sr_ns, avx)
x86/tx_float: replace fft_sr_avx with fft_sr_fma3 When the SLOW_GATHER flag was added to the AVX2 version, this made FMA3-features not enabled on Zen CPUs. As FMA3 adds 6-7% across all platforms that support it, in the interest of saving space, this commit removes the AVX version and replaces it with an FMA3 version. The only CPUs affected are Sandy Bridge and Bulldozer, which have AVX support, but no FMA3 support. In the future, if there's a demand for it, a version of the function duplicated for AVX can be added.
2022-05-21 01:39:12 +02:00
TX_DECL_FN(fft_sr, fma3)
TX_DECL_FN(fft_sr_ns, fma3)
Revert "x86/tx_float: remove vgatherdpd usage" This reverts commit 82a68a8771ca39564f6a74e0f875d6852e7a0c2a. Smarter slow ISA penalties makes gathers still useful. The intention is to use gathers with the final stage of non-ptwo iMDCTs, where they give benefit.
2022-05-21 00:05:58 +02:00
TX_DECL_FN(fft_sr, avx2)
TX_DECL_FN(fft_sr_ns, avx2)
x86/tx_float: add permute-free FFT versions These are used in the PFA transforms and MDCTs.
2022-01-25 23:39:09 +02:00
x86/tx_float: add 15xN PFA FFT AVX SIMD ~4x faster than the C version. The shuffles in the 15pt dim1 are seriously expensive. Not happy with it, but I'm contempt. Can be easily converted to pure AVX by removing all vpermpd/vpermps instructions.
2022-09-19 05:53:01 +02:00
TX_DECL_FN(fft_pfa_15xM, avx2)
TX_DECL_FN(fft_pfa_15xM_ns, avx2)
x86/tx_float: generalize iMDCT To support non-aligned buffers during the post-transform step, just iterate backwards over the array. This allows using the 15xN-point FFT, with which the speed is 2.1 times faster than our old libavcodec implementation.
2022-09-23 10:38:29 +02:00
TX_DECL_FN(mdct_inv, avx2)
x86/tx_float: implement inverse MDCT AVX2 assembly This commit implements an iMDCT in pure assembly. This is capable of processing any mod-8 transforms, rather than just power of two, but since power of two is all we have assembly for currently, that's what's supported. It would really benefit if we could somehow use the C code to decide which function to jump into, but exposing function labels from assebly into C is anything but easy. The post-transform loop could probably be improved. This was somewhat annoying to write, as we must support arbitrary strides during runtime. There's a fast branch for stride == 4 bytes and a slower one which uses vgatherdps. Zen 3 benchmarks for stride == 4 for old (av_imdct_half) vs new (av_tx): 128pt: 2811 decicycles in av_tx (imdct),16775916 runs, 1300 skips 3082 decicycles in av_imdct_half,16776751 runs, 465 skips 256pt: 4920 decicycles in av_tx (imdct),16775820 runs, 1396 skips 5378 decicycles in av_imdct_half,16776411 runs, 805 skips 512pt: 9668 decicycles in av_tx (imdct),16775774 runs, 1442 skips 10626 decicycles in av_imdct_half,16775647 runs, 1569 skips 1024pt: 19812 decicycles in av_tx (imdct),16777144 runs, 72 skips 23036 decicycles in av_imdct_half,16777167 runs, 49 skips
2022-09-03 03:36:40 +02:00
x86/tx_float: add asm call versions of the 2pt and 4pt transforms Verified to be working.
2022-09-19 04:14:52 +02:00
TX_DECL_FN(fft2_asm, sse3)
TX_DECL_FN(fft4_fwd_asm, sse2)
TX_DECL_FN(fft4_inv_asm, sse2)
x86/tx_float: add support for calling assembly functions from assembly Needed for the next patch. We get this for the extremely small cost of a branch on _ns functions, which wouldn't be used anyway with assembly.
2022-09-03 03:34:57 +02:00
TX_DECL_FN(fft8_asm, sse3)
TX_DECL_FN(fft8_asm, avx)
TX_DECL_FN(fft16_asm, avx)
TX_DECL_FN(fft16_asm, fma3)
TX_DECL_FN(fft32_asm, avx)
TX_DECL_FN(fft32_asm, fma3)
x86/tx_float: enable AVX-only split-radix FFT codelets Sandy Bridge, Ivy Bridge and Bulldozer cores don't support FMA3.
2022-09-24 03:51:48 +02:00
TX_DECL_FN(fft_sr_asm, avx)
x86/tx_float: add support for calling assembly functions from assembly Needed for the next patch. We get this for the extremely small cost of a branch on _ns functions, which wouldn't be used anyway with assembly.
2022-09-03 03:34:57 +02:00
TX_DECL_FN(fft_sr_asm, fma3)
TX_DECL_FN(fft_sr_asm, avx2)
x86/tx_float: add 15xN PFA FFT AVX SIMD ~4x faster than the C version. The shuffles in the 15pt dim1 are seriously expensive. Not happy with it, but I'm contempt. Can be easily converted to pure AVX by removing all vpermpd/vpermps instructions.
2022-09-19 05:53:01 +02:00
TX_DECL_FN(fft_pfa_15xM_asm, avx2)
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 08:14:46 +02:00
#define DECL_INIT_FN(basis, interleave) \
lavu/tx: refactor assembly codelet definition This commit does some refactoring to make defining assembly codelets smaller, and fixes compiler redefinition warnings. It also allows for other assembly versions to reuse the same boilerplate code as x86. Finally, it also adds the out_of_place flag to all assembly codelets. This changes nothing, as out-of-place operation was assumed to be available anyway, but this makes it more explicit.
2022-02-07 04:30:27 +02:00
static av_cold int b ##basis## _i ##interleave(AVTXContext *s, \
const FFTXCodelet *cd, \
uint64_t flags, \
FFTXCodeletOptions *opts, \
int len, int inv, \
const void *scale) \
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 08:14:46 +02:00
{ \
const int inv_lookup = opts ? opts->invert_lookup : 1; \
ff_tx_init_tabs_float(len); \
x86/tx_float: add permute-free FFT versions These are used in the PFA transforms and MDCTs.
2022-01-25 23:39:09 +02:00
if (cd->max_len == 2) \
return ff_tx_gen_ptwo_revtab(s, inv_lookup); \
else \
x86/tx_float: implement inverse MDCT AVX2 assembly This commit implements an iMDCT in pure assembly. This is capable of processing any mod-8 transforms, rather than just power of two, but since power of two is all we have assembly for currently, that's what's supported. It would really benefit if we could somehow use the C code to decide which function to jump into, but exposing function labels from assebly into C is anything but easy. The post-transform loop could probably be improved. This was somewhat annoying to write, as we must support arbitrary strides during runtime. There's a fast branch for stride == 4 bytes and a slower one which uses vgatherdps. Zen 3 benchmarks for stride == 4 for old (av_imdct_half) vs new (av_tx): 128pt: 2811 decicycles in av_tx (imdct),16775916 runs, 1300 skips 3082 decicycles in av_imdct_half,16776751 runs, 465 skips 256pt: 4920 decicycles in av_tx (imdct),16775820 runs, 1396 skips 5378 decicycles in av_imdct_half,16776411 runs, 805 skips 512pt: 9668 decicycles in av_tx (imdct),16775774 runs, 1442 skips 10626 decicycles in av_imdct_half,16775647 runs, 1569 skips 1024pt: 19812 decicycles in av_tx (imdct),16777144 runs, 72 skips 23036 decicycles in av_imdct_half,16777167 runs, 49 skips
2022-09-03 03:36:40 +02:00
return ff_tx_gen_split_radix_parity_revtab(s, len, inv, inv_lookup, \
x86/tx_float: add permute-free FFT versions These are used in the PFA transforms and MDCTs.
2022-01-25 23:39:09 +02:00
basis, interleave); \
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 08:14:46 +02:00
}
lavu/x86: add FFT assembly This commit adds a pure x86 assembly SIMD version of the FFT in libavutil/tx. The design of this pure assembly FFT is pretty unconventional. On the lowest level, instead of splitting the complex numbers into real and imaginary parts, we keep complex numbers together but split them in terms of parity. This saves a number of shuffles in each transform, but more importantly, it splits each transform into two independent paths, which we process using separate registers in parallel. This allows us to keep all units saturated and lets us use all available registers to avoid dependencies. Moreover, it allows us to double the granularity of our per-load permutation, skipping many expensive lookups and allowing us to use just 4 loads per register, rather than 8, or in case FMA3 (and by extension, AVX2), use the vgatherdpd instruction, which is at least as fast as 4 separate loads on old hardware, and quite a bit faster on modern CPUs). Higher up, we go for a bottom-up construction of large transforms, foregoing the traditional per-transform call-return recursion chains. Instead, we always start at the bottom-most basis transform (in this case, a 32-point transform), and continue constructing larger and larger transforms until we return to the top-most transform. This way, we only touch the stack 3 times per a complete target transform: once for the 1/2 length transform and two times for the 1/4 length transform. The combination algorithm we use is a standard Split-Radix algorithm, as used in our C code. Although a version with less operations exists (Steven G. Johnson and Matteo Frigo's "A modified split-radix FFT with fewer arithmetic operations", IEEE Trans. Signal Process. 55 (1), 111–119 (2007), which is the one FFTW uses), it only has 2% less operations and requires at least 4x the binary code (due to it needing 4 different paths to do a single transform). That version also has other issues which prevent it from being implemented with SIMD code as efficiently, which makes it lose the marginal gains it offered, and cannot be performed bottom-up, requiring many recursive call-return chains, whose overhead adds up. We go through a lot of effort to minimize load/stores by keeping as much in registers in between construcring transforms. This saves us around 32 cycles, on paper, but in reality a lot more due to load/store aliasing (a load from a memory location cannot be issued while there's a store pending, and there are only so many (2 for Zen 3) load/store units in a CPU). Also, we interleave coefficients during the last stage to save on a store+load per register. Each of the smallest, basis transforms (4, 8 and 16-point in our case) has been extremely optimized. Our 8-point transform is barely 20 instructions in total, beating our old implementation 8-point transform by 1 instruction. Our 2x8-point transform is 23 instructions, beating our old implementation by 6 instruction and needing 50% less cycles. Our 16-point transform's combination code takes slightly more instructions than our old implementation, but makes up for it by requiring a lot less arithmetic operations. Overall, the transform was optimized for the timings of Zen 3, which at the time of writing has the most IPC from all documented CPUs. Shuffles were preferred over arithmetic operations due to their 1/0.5 latency/throughput. On average, this code is 30% faster than our old libavcodec implementation. It's able to trade blows with the previously-untouchable FFTW on small transforms, and due to its tiny size and better prediction, outdoes FFTW on larger transforms by 11% on the largest currently supported size.
2021-04-10 03:54:22 +02:00
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 08:14:46 +02:00
DECL_INIT_FN(8, 0)
DECL_INIT_FN(8, 2)
lavu/x86: add FFT assembly This commit adds a pure x86 assembly SIMD version of the FFT in libavutil/tx. The design of this pure assembly FFT is pretty unconventional. On the lowest level, instead of splitting the complex numbers into real and imaginary parts, we keep complex numbers together but split them in terms of parity. This saves a number of shuffles in each transform, but more importantly, it splits each transform into two independent paths, which we process using separate registers in parallel. This allows us to keep all units saturated and lets us use all available registers to avoid dependencies. Moreover, it allows us to double the granularity of our per-load permutation, skipping many expensive lookups and allowing us to use just 4 loads per register, rather than 8, or in case FMA3 (and by extension, AVX2), use the vgatherdpd instruction, which is at least as fast as 4 separate loads on old hardware, and quite a bit faster on modern CPUs). Higher up, we go for a bottom-up construction of large transforms, foregoing the traditional per-transform call-return recursion chains. Instead, we always start at the bottom-most basis transform (in this case, a 32-point transform), and continue constructing larger and larger transforms until we return to the top-most transform. This way, we only touch the stack 3 times per a complete target transform: once for the 1/2 length transform and two times for the 1/4 length transform. The combination algorithm we use is a standard Split-Radix algorithm, as used in our C code. Although a version with less operations exists (Steven G. Johnson and Matteo Frigo's "A modified split-radix FFT with fewer arithmetic operations", IEEE Trans. Signal Process. 55 (1), 111–119 (2007), which is the one FFTW uses), it only has 2% less operations and requires at least 4x the binary code (due to it needing 4 different paths to do a single transform). That version also has other issues which prevent it from being implemented with SIMD code as efficiently, which makes it lose the marginal gains it offered, and cannot be performed bottom-up, requiring many recursive call-return chains, whose overhead adds up. We go through a lot of effort to minimize load/stores by keeping as much in registers in between construcring transforms. This saves us around 32 cycles, on paper, but in reality a lot more due to load/store aliasing (a load from a memory location cannot be issued while there's a store pending, and there are only so many (2 for Zen 3) load/store units in a CPU). Also, we interleave coefficients during the last stage to save on a store+load per register. Each of the smallest, basis transforms (4, 8 and 16-point in our case) has been extremely optimized. Our 8-point transform is barely 20 instructions in total, beating our old implementation 8-point transform by 1 instruction. Our 2x8-point transform is 23 instructions, beating our old implementation by 6 instruction and needing 50% less cycles. Our 16-point transform's combination code takes slightly more instructions than our old implementation, but makes up for it by requiring a lot less arithmetic operations. Overall, the transform was optimized for the timings of Zen 3, which at the time of writing has the most IPC from all documented CPUs. Shuffles were preferred over arithmetic operations due to their 1/0.5 latency/throughput. On average, this code is 30% faster than our old libavcodec implementation. It's able to trade blows with the previously-untouchable FFTW on small transforms, and due to its tiny size and better prediction, outdoes FFTW on larger transforms by 11% on the largest currently supported size.
2021-04-10 03:54:22 +02:00
x86/tx_float: implement inverse MDCT AVX2 assembly This commit implements an iMDCT in pure assembly. This is capable of processing any mod-8 transforms, rather than just power of two, but since power of two is all we have assembly for currently, that's what's supported. It would really benefit if we could somehow use the C code to decide which function to jump into, but exposing function labels from assebly into C is anything but easy. The post-transform loop could probably be improved. This was somewhat annoying to write, as we must support arbitrary strides during runtime. There's a fast branch for stride == 4 bytes and a slower one which uses vgatherdps. Zen 3 benchmarks for stride == 4 for old (av_imdct_half) vs new (av_tx): 128pt: 2811 decicycles in av_tx (imdct),16775916 runs, 1300 skips 3082 decicycles in av_imdct_half,16776751 runs, 465 skips 256pt: 4920 decicycles in av_tx (imdct),16775820 runs, 1396 skips 5378 decicycles in av_imdct_half,16776411 runs, 805 skips 512pt: 9668 decicycles in av_tx (imdct),16775774 runs, 1442 skips 10626 decicycles in av_imdct_half,16775647 runs, 1569 skips 1024pt: 19812 decicycles in av_tx (imdct),16777144 runs, 72 skips 23036 decicycles in av_imdct_half,16777167 runs, 49 skips
2022-09-03 03:36:40 +02:00
static av_cold int m_inv_init(AVTXContext *s, const FFTXCodelet *cd,
uint64_t flags, FFTXCodeletOptions *opts,
int len, int inv, const void *scale)
{
int ret;
x86/tx_float: generalize iMDCT To support non-aligned buffers during the post-transform step, just iterate backwards over the array. This allows using the 15xN-point FFT, with which the speed is 2.1 times faster than our old libavcodec implementation.
2022-09-23 10:38:29 +02:00
FFTXCodeletOptions sub_opts = { .invert_lookup = 1 };
x86/tx_float: implement inverse MDCT AVX2 assembly This commit implements an iMDCT in pure assembly. This is capable of processing any mod-8 transforms, rather than just power of two, but since power of two is all we have assembly for currently, that's what's supported. It would really benefit if we could somehow use the C code to decide which function to jump into, but exposing function labels from assebly into C is anything but easy. The post-transform loop could probably be improved. This was somewhat annoying to write, as we must support arbitrary strides during runtime. There's a fast branch for stride == 4 bytes and a slower one which uses vgatherdps. Zen 3 benchmarks for stride == 4 for old (av_imdct_half) vs new (av_tx): 128pt: 2811 decicycles in av_tx (imdct),16775916 runs, 1300 skips 3082 decicycles in av_imdct_half,16776751 runs, 465 skips 256pt: 4920 decicycles in av_tx (imdct),16775820 runs, 1396 skips 5378 decicycles in av_imdct_half,16776411 runs, 805 skips 512pt: 9668 decicycles in av_tx (imdct),16775774 runs, 1442 skips 10626 decicycles in av_imdct_half,16775647 runs, 1569 skips 1024pt: 19812 decicycles in av_tx (imdct),16777144 runs, 72 skips 23036 decicycles in av_imdct_half,16777167 runs, 49 skips
2022-09-03 03:36:40 +02:00
s->scale_d = *((SCALE_TYPE *)scale);
s->scale_f = s->scale_d;
flags &= ~FF_TX_OUT_OF_PLACE; /* We want the subtransform to be */
flags |= AV_TX_INPLACE; /* in-place */
flags |= FF_TX_PRESHUFFLE; /* This function handles the permute step */
flags |= FF_TX_ASM_CALL; /* We want an assembly function, not C */
if ((ret = ff_tx_init_subtx(s, TX_TYPE(FFT), flags, &sub_opts, len >> 1,
inv, scale)))
return ret;
x86/tx_float: generalize iMDCT To support non-aligned buffers during the post-transform step, just iterate backwards over the array. This allows using the 15xN-point FFT, with which the speed is 2.1 times faster than our old libavcodec implementation.
2022-09-23 10:38:29 +02:00
s->map = av_malloc(len*sizeof(*s->map));
if (!s->map)
return AVERROR(ENOMEM);
memcpy(s->map, s->sub->map, (len >> 1)*sizeof(*s->map));
/* Invert lookup table for unstrided path */
for (int i = 0; i < (len >> 1); i++)
s->map[(len >> 1) + s->map[i]] = i;
if ((ret = ff_tx_mdct_gen_exp_float(s, s->map)))
x86/tx_float: implement inverse MDCT AVX2 assembly This commit implements an iMDCT in pure assembly. This is capable of processing any mod-8 transforms, rather than just power of two, but since power of two is all we have assembly for currently, that's what's supported. It would really benefit if we could somehow use the C code to decide which function to jump into, but exposing function labels from assebly into C is anything but easy. The post-transform loop could probably be improved. This was somewhat annoying to write, as we must support arbitrary strides during runtime. There's a fast branch for stride == 4 bytes and a slower one which uses vgatherdps. Zen 3 benchmarks for stride == 4 for old (av_imdct_half) vs new (av_tx): 128pt: 2811 decicycles in av_tx (imdct),16775916 runs, 1300 skips 3082 decicycles in av_imdct_half,16776751 runs, 465 skips 256pt: 4920 decicycles in av_tx (imdct),16775820 runs, 1396 skips 5378 decicycles in av_imdct_half,16776411 runs, 805 skips 512pt: 9668 decicycles in av_tx (imdct),16775774 runs, 1442 skips 10626 decicycles in av_imdct_half,16775647 runs, 1569 skips 1024pt: 19812 decicycles in av_tx (imdct),16777144 runs, 72 skips 23036 decicycles in av_imdct_half,16777167 runs, 49 skips
2022-09-03 03:36:40 +02:00
return ret;
return 0;
}
x86/tx_float: add 15xN PFA FFT AVX SIMD ~4x faster than the C version. The shuffles in the 15pt dim1 are seriously expensive. Not happy with it, but I'm contempt. Can be easily converted to pure AVX by removing all vpermpd/vpermps instructions.
2022-09-19 05:53:01 +02:00
static av_cold int fft_pfa_init(AVTXContext *s,
const FFTXCodelet *cd,
uint64_t flags,
FFTXCodeletOptions *opts,
int len, int inv,
const void *scale)
{
int ret;
int sub_len = len / cd->factors[0];
FFTXCodeletOptions sub_opts = { .invert_lookup = 0 };
flags &= ~FF_TX_OUT_OF_PLACE; /* We want the subtransform to be */
flags |= AV_TX_INPLACE; /* in-place */
flags |= FF_TX_PRESHUFFLE; /* This function handles the permute step */
flags |= FF_TX_ASM_CALL; /* We want an assembly function, not C */
if ((ret = ff_tx_init_subtx(s, TX_TYPE(FFT), flags, &sub_opts,
sub_len, inv, scale)))
return ret;
if ((ret = ff_tx_gen_compound_mapping(s, cd->factors[0], sub_len)))
return ret;
if (cd->factors[0] == 15) {
for (int k = 0; k < s->sub[0].len; k++) {
int cnt = 0;
int tmp[15];
memcpy(tmp, &s->map[k*15], 15*sizeof(*tmp));
for (int i = 1; i < 15; i += 3) {
s->map[k*15 + cnt] = tmp[i];
cnt++;
}
for (int i = 2; i < 15; i += 3) {
s->map[k*15 + cnt] = tmp[i];
cnt++;
}
for (int i = 0; i < 15; i += 3) {
s->map[k*15 + cnt] = tmp[i];
cnt++;
}
memmove(&s->map[k*15 + 7], &s->map[k*15 + 6], 4*sizeof(int));
memmove(&s->map[k*15 + 3], &s->map[k*15 + 1], 4*sizeof(int));
s->map[k*15 + 1] = tmp[2];
s->map[k*15 + 2] = tmp[0];
}
}
if (!(s->tmp = av_malloc(len*sizeof(*s->tmp))))
return AVERROR(ENOMEM);
TX_TAB(ff_tx_init_tabs)(len / sub_len);
return 0;
}
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 08:14:46 +02:00
const FFTXCodelet * const ff_tx_codelet_list_float_x86[] = {
lavu/tx: refactor assembly codelet definition This commit does some refactoring to make defining assembly codelets smaller, and fixes compiler redefinition warnings. It also allows for other assembly versions to reuse the same boilerplate code as x86. Finally, it also adds the out_of_place flag to all assembly codelets. This changes nothing, as out-of-place operation was assumed to be available anyway, but this makes it more explicit.
2022-02-07 04:30:27 +02:00
TX_DEF(fft2, FFT, 2, 2, 2, 0, 128, NULL, sse3, SSE3, AV_TX_INPLACE, 0),
x86/tx_float: add asm call versions of the 2pt and 4pt transforms Verified to be working.
2022-09-19 04:14:52 +02:00
TX_DEF(fft2_asm, FFT, 2, 2, 2, 0, 192, b8_i0, sse3, SSE3,
AV_TX_INPLACE | FF_TX_PRESHUFFLE | FF_TX_ASM_CALL, 0),
lavu/tx: refactor assembly codelet definition This commit does some refactoring to make defining assembly codelets smaller, and fixes compiler redefinition warnings. It also allows for other assembly versions to reuse the same boilerplate code as x86. Finally, it also adds the out_of_place flag to all assembly codelets. This changes nothing, as out-of-place operation was assumed to be available anyway, but this makes it more explicit.
2022-02-07 04:30:27 +02:00
TX_DEF(fft2, FFT, 2, 2, 2, 0, 192, b8_i0, sse3, SSE3, AV_TX_INPLACE | FF_TX_PRESHUFFLE, 0),
TX_DEF(fft4_fwd, FFT, 4, 4, 2, 0, 128, NULL, sse2, SSE2, AV_TX_INPLACE | FF_TX_FORWARD_ONLY, 0),
x86/tx_float: add asm call versions of the 2pt and 4pt transforms Verified to be working.
2022-09-19 04:14:52 +02:00
TX_DEF(fft4_fwd_asm, FFT, 4, 4, 2, 0, 192, b8_i0, sse2, SSE2,
AV_TX_INPLACE | FF_TX_PRESHUFFLE | FF_TX_ASM_CALL, 0),
TX_DEF(fft4_inv_asm, FFT, 4, 4, 2, 0, 128, NULL, sse2, SSE2,
AV_TX_INPLACE | FF_TX_INVERSE_ONLY | FF_TX_ASM_CALL, 0),
lavu/tx: refactor assembly codelet definition This commit does some refactoring to make defining assembly codelets smaller, and fixes compiler redefinition warnings. It also allows for other assembly versions to reuse the same boilerplate code as x86. Finally, it also adds the out_of_place flag to all assembly codelets. This changes nothing, as out-of-place operation was assumed to be available anyway, but this makes it more explicit.
2022-02-07 04:30:27 +02:00
TX_DEF(fft4_fwd, FFT, 4, 4, 2, 0, 192, b8_i0, sse2, SSE2, AV_TX_INPLACE | FF_TX_PRESHUFFLE, 0),
TX_DEF(fft4_inv, FFT, 4, 4, 2, 0, 128, NULL, sse2, SSE2, AV_TX_INPLACE | FF_TX_INVERSE_ONLY, 0),
TX_DEF(fft8, FFT, 8, 8, 2, 0, 128, b8_i0, sse3, SSE3, AV_TX_INPLACE, 0),
x86/tx_float: add support for calling assembly functions from assembly Needed for the next patch. We get this for the extremely small cost of a branch on _ns functions, which wouldn't be used anyway with assembly.
2022-09-03 03:34:57 +02:00
TX_DEF(fft8_asm, FFT, 8, 8, 2, 0, 192, b8_i0, sse3, SSE3,
AV_TX_INPLACE | FF_TX_PRESHUFFLE | FF_TX_ASM_CALL, 0),
lavu/tx: refactor assembly codelet definition This commit does some refactoring to make defining assembly codelets smaller, and fixes compiler redefinition warnings. It also allows for other assembly versions to reuse the same boilerplate code as x86. Finally, it also adds the out_of_place flag to all assembly codelets. This changes nothing, as out-of-place operation was assumed to be available anyway, but this makes it more explicit.
2022-02-07 04:30:27 +02:00
TX_DEF(fft8_ns, FFT, 8, 8, 2, 0, 192, b8_i0, sse3, SSE3, AV_TX_INPLACE | FF_TX_PRESHUFFLE, 0),
x86/tx_float: add AV_CPU_FLAG_AVXSLOW/SLOW_GATHER flags where appropriate
2022-05-21 00:11:45 +02:00
TX_DEF(fft8, FFT, 8, 8, 2, 0, 256, b8_i0, avx, AVX, AV_TX_INPLACE, AV_CPU_FLAG_AVXSLOW),
x86/tx_float: add support for calling assembly functions from assembly Needed for the next patch. We get this for the extremely small cost of a branch on _ns functions, which wouldn't be used anyway with assembly.
2022-09-03 03:34:57 +02:00
TX_DEF(fft8_asm, FFT, 8, 8, 2, 0, 320, b8_i0, avx, AVX,
AV_TX_INPLACE | FF_TX_PRESHUFFLE | FF_TX_ASM_CALL, AV_CPU_FLAG_AVXSLOW),
x86/tx_float: add AV_CPU_FLAG_AVXSLOW/SLOW_GATHER flags where appropriate
2022-05-21 00:11:45 +02:00
TX_DEF(fft8_ns, FFT, 8, 8, 2, 0, 320, b8_i0, avx, AVX, AV_TX_INPLACE | FF_TX_PRESHUFFLE,
AV_CPU_FLAG_AVXSLOW),
TX_DEF(fft16, FFT, 16, 16, 2, 0, 256, b8_i2, avx, AVX, AV_TX_INPLACE, AV_CPU_FLAG_AVXSLOW),
x86/tx_float: add support for calling assembly functions from assembly Needed for the next patch. We get this for the extremely small cost of a branch on _ns functions, which wouldn't be used anyway with assembly.
2022-09-03 03:34:57 +02:00
TX_DEF(fft16_asm, FFT, 16, 16, 2, 0, 320, b8_i2, avx, AVX,
AV_TX_INPLACE | FF_TX_PRESHUFFLE | FF_TX_ASM_CALL, AV_CPU_FLAG_AVXSLOW),
x86/tx_float: add AV_CPU_FLAG_AVXSLOW/SLOW_GATHER flags where appropriate
2022-05-21 00:11:45 +02:00
TX_DEF(fft16_ns, FFT, 16, 16, 2, 0, 320, b8_i2, avx, AVX, AV_TX_INPLACE | FF_TX_PRESHUFFLE,
AV_CPU_FLAG_AVXSLOW),
TX_DEF(fft16, FFT, 16, 16, 2, 0, 288, b8_i2, fma3, FMA3, AV_TX_INPLACE, AV_CPU_FLAG_AVXSLOW),
x86/tx_float: add support for calling assembly functions from assembly Needed for the next patch. We get this for the extremely small cost of a branch on _ns functions, which wouldn't be used anyway with assembly.
2022-09-03 03:34:57 +02:00
TX_DEF(fft16_asm, FFT, 16, 16, 2, 0, 352, b8_i2, fma3, FMA3,
AV_TX_INPLACE | FF_TX_PRESHUFFLE | FF_TX_ASM_CALL, AV_CPU_FLAG_AVXSLOW),
x86/tx_float: add AV_CPU_FLAG_AVXSLOW/SLOW_GATHER flags where appropriate
2022-05-21 00:11:45 +02:00
TX_DEF(fft16_ns, FFT, 16, 16, 2, 0, 352, b8_i2, fma3, FMA3, AV_TX_INPLACE | FF_TX_PRESHUFFLE,
AV_CPU_FLAG_AVXSLOW),
lavu/x86/tx_float: fix FMA3 implying AVX2 is available It's the other way around - AVX2 implies FMA3 is available.
2021-04-24 18:45:02 +02:00
#if ARCH_X86_64
x86/tx_float: add AV_CPU_FLAG_AVXSLOW/SLOW_GATHER flags where appropriate
2022-05-21 00:11:45 +02:00
TX_DEF(fft32, FFT, 32, 32, 2, 0, 256, b8_i2, avx, AVX, AV_TX_INPLACE, AV_CPU_FLAG_AVXSLOW),
x86/tx_float: add support for calling assembly functions from assembly Needed for the next patch. We get this for the extremely small cost of a branch on _ns functions, which wouldn't be used anyway with assembly.
2022-09-03 03:34:57 +02:00
TX_DEF(fft32_asm, FFT, 32, 32, 2, 0, 320, b8_i2, avx, AVX,
AV_TX_INPLACE | FF_TX_PRESHUFFLE | FF_TX_ASM_CALL, AV_CPU_FLAG_AVXSLOW),
x86/tx_float: add AV_CPU_FLAG_AVXSLOW/SLOW_GATHER flags where appropriate
2022-05-21 00:11:45 +02:00
TX_DEF(fft32_ns, FFT, 32, 32, 2, 0, 320, b8_i2, avx, AVX, AV_TX_INPLACE | FF_TX_PRESHUFFLE,
AV_CPU_FLAG_AVXSLOW),
TX_DEF(fft32, FFT, 32, 32, 2, 0, 288, b8_i2, fma3, FMA3, AV_TX_INPLACE, AV_CPU_FLAG_AVXSLOW),
x86/tx_float: add support for calling assembly functions from assembly Needed for the next patch. We get this for the extremely small cost of a branch on _ns functions, which wouldn't be used anyway with assembly.
2022-09-03 03:34:57 +02:00
TX_DEF(fft32_asm, FFT, 32, 32, 2, 0, 352, b8_i2, fma3, FMA3,
AV_TX_INPLACE | FF_TX_PRESHUFFLE | FF_TX_ASM_CALL, AV_CPU_FLAG_AVXSLOW),
x86/tx_float: add AV_CPU_FLAG_AVXSLOW/SLOW_GATHER flags where appropriate
2022-05-21 00:11:45 +02:00
TX_DEF(fft32_ns, FFT, 32, 32, 2, 0, 352, b8_i2, fma3, FMA3, AV_TX_INPLACE | FF_TX_PRESHUFFLE,
AV_CPU_FLAG_AVXSLOW),
x86/tx_float: enable AVX-only split-radix FFT codelets Sandy Bridge, Ivy Bridge and Bulldozer cores don't support FMA3.
2022-09-24 03:51:48 +02:00
TX_DEF(fft_sr, FFT, 64, 131072, 2, 0, 256, b8_i2, avx, AVX, 0, AV_CPU_FLAG_AVXSLOW),
TX_DEF(fft_sr_asm, FFT, 64, 131072, 2, 0, 320, b8_i2, avx, AVX,
AV_TX_INPLACE | FF_TX_PRESHUFFLE | FF_TX_ASM_CALL, AV_CPU_FLAG_AVXSLOW),
TX_DEF(fft_sr_ns, FFT, 64, 131072, 2, 0, 320, b8_i2, avx, AVX, AV_TX_INPLACE | FF_TX_PRESHUFFLE,
AV_CPU_FLAG_AVXSLOW),
x86/tx_float: replace fft_sr_avx with fft_sr_fma3 When the SLOW_GATHER flag was added to the AVX2 version, this made FMA3-features not enabled on Zen CPUs. As FMA3 adds 6-7% across all platforms that support it, in the interest of saving space, this commit removes the AVX version and replaces it with an FMA3 version. The only CPUs affected are Sandy Bridge and Bulldozer, which have AVX support, but no FMA3 support. In the future, if there's a demand for it, a version of the function duplicated for AVX can be added.
2022-05-21 01:39:12 +02:00
TX_DEF(fft_sr, FFT, 64, 131072, 2, 0, 288, b8_i2, fma3, FMA3, 0, AV_CPU_FLAG_AVXSLOW),
x86/tx_float: add support for calling assembly functions from assembly Needed for the next patch. We get this for the extremely small cost of a branch on _ns functions, which wouldn't be used anyway with assembly.
2022-09-03 03:34:57 +02:00
TX_DEF(fft_sr_asm, FFT, 64, 131072, 2, 0, 352, b8_i2, fma3, FMA3,
AV_TX_INPLACE | FF_TX_PRESHUFFLE | FF_TX_ASM_CALL, AV_CPU_FLAG_AVXSLOW),
x86/tx_float: replace fft_sr_avx with fft_sr_fma3 When the SLOW_GATHER flag was added to the AVX2 version, this made FMA3-features not enabled on Zen CPUs. As FMA3 adds 6-7% across all platforms that support it, in the interest of saving space, this commit removes the AVX version and replaces it with an FMA3 version. The only CPUs affected are Sandy Bridge and Bulldozer, which have AVX support, but no FMA3 support. In the future, if there's a demand for it, a version of the function duplicated for AVX can be added.
2022-05-21 01:39:12 +02:00
TX_DEF(fft_sr_ns, FFT, 64, 131072, 2, 0, 352, b8_i2, fma3, FMA3, AV_TX_INPLACE | FF_TX_PRESHUFFLE,
Revert "x86/tx_float: remove vgatherdpd usage" This reverts commit 82a68a8771ca39564f6a74e0f875d6852e7a0c2a. Smarter slow ISA penalties makes gathers still useful. The intention is to use gathers with the final stage of non-ptwo iMDCTs, where they give benefit.
2022-05-21 00:05:58 +02:00
AV_CPU_FLAG_AVXSLOW),
x86/tx_float: add 15xN PFA FFT AVX SIMD ~4x faster than the C version. The shuffles in the 15pt dim1 are seriously expensive. Not happy with it, but I'm contempt. Can be easily converted to pure AVX by removing all vpermpd/vpermps instructions.
2022-09-19 05:53:01 +02:00
x86/tx_float: replace fft_sr_avx with fft_sr_fma3 When the SLOW_GATHER flag was added to the AVX2 version, this made FMA3-features not enabled on Zen CPUs. As FMA3 adds 6-7% across all platforms that support it, in the interest of saving space, this commit removes the AVX version and replaces it with an FMA3 version. The only CPUs affected are Sandy Bridge and Bulldozer, which have AVX support, but no FMA3 support. In the future, if there's a demand for it, a version of the function duplicated for AVX can be added.
2022-05-21 01:39:12 +02:00
#if HAVE_AVX2_EXTERNAL
TX_DEF(fft_sr, FFT, 64, 131072, 2, 0, 320, b8_i2, avx2, AVX2, 0,
x86/tx_float: add AV_CPU_FLAG_AVXSLOW/SLOW_GATHER flags where appropriate
2022-05-21 00:11:45 +02:00
AV_CPU_FLAG_AVXSLOW | AV_CPU_FLAG_SLOW_GATHER),
x86/tx_float: add support for calling assembly functions from assembly Needed for the next patch. We get this for the extremely small cost of a branch on _ns functions, which wouldn't be used anyway with assembly.
2022-09-03 03:34:57 +02:00
TX_DEF(fft_sr_asm, FFT, 64, 131072, 2, 0, 384, b8_i2, avx2, AVX2,
AV_TX_INPLACE | FF_TX_PRESHUFFLE | FF_TX_ASM_CALL, AV_CPU_FLAG_AVXSLOW | AV_CPU_FLAG_SLOW_GATHER),
x86/tx_float: replace fft_sr_avx with fft_sr_fma3 When the SLOW_GATHER flag was added to the AVX2 version, this made FMA3-features not enabled on Zen CPUs. As FMA3 adds 6-7% across all platforms that support it, in the interest of saving space, this commit removes the AVX version and replaces it with an FMA3 version. The only CPUs affected are Sandy Bridge and Bulldozer, which have AVX support, but no FMA3 support. In the future, if there's a demand for it, a version of the function duplicated for AVX can be added.
2022-05-21 01:39:12 +02:00
TX_DEF(fft_sr_ns, FFT, 64, 131072, 2, 0, 384, b8_i2, avx2, AVX2, AV_TX_INPLACE | FF_TX_PRESHUFFLE,
x86/tx_float: add AV_CPU_FLAG_AVXSLOW/SLOW_GATHER flags where appropriate
2022-05-21 00:11:45 +02:00
AV_CPU_FLAG_AVXSLOW | AV_CPU_FLAG_SLOW_GATHER),
x86/tx_float: implement inverse MDCT AVX2 assembly This commit implements an iMDCT in pure assembly. This is capable of processing any mod-8 transforms, rather than just power of two, but since power of two is all we have assembly for currently, that's what's supported. It would really benefit if we could somehow use the C code to decide which function to jump into, but exposing function labels from assebly into C is anything but easy. The post-transform loop could probably be improved. This was somewhat annoying to write, as we must support arbitrary strides during runtime. There's a fast branch for stride == 4 bytes and a slower one which uses vgatherdps. Zen 3 benchmarks for stride == 4 for old (av_imdct_half) vs new (av_tx): 128pt: 2811 decicycles in av_tx (imdct),16775916 runs, 1300 skips 3082 decicycles in av_imdct_half,16776751 runs, 465 skips 256pt: 4920 decicycles in av_tx (imdct),16775820 runs, 1396 skips 5378 decicycles in av_imdct_half,16776411 runs, 805 skips 512pt: 9668 decicycles in av_tx (imdct),16775774 runs, 1442 skips 10626 decicycles in av_imdct_half,16775647 runs, 1569 skips 1024pt: 19812 decicycles in av_tx (imdct),16777144 runs, 72 skips 23036 decicycles in av_imdct_half,16777167 runs, 49 skips
2022-09-03 03:36:40 +02:00
x86/tx_float: add 15xN PFA FFT AVX SIMD ~4x faster than the C version. The shuffles in the 15pt dim1 are seriously expensive. Not happy with it, but I'm contempt. Can be easily converted to pure AVX by removing all vpermpd/vpermps instructions.
2022-09-19 05:53:01 +02:00
TX_DEF(fft_pfa_15xM, FFT, 60, TX_LEN_UNLIMITED, 15, TX_FACTOR_ANY, 320, fft_pfa_init, avx2, AVX2,
AV_TX_INPLACE, AV_CPU_FLAG_AVXSLOW | AV_CPU_FLAG_SLOW_GATHER),
TX_DEF(fft_pfa_15xM_asm, FFT, 60, TX_LEN_UNLIMITED, 15, TX_FACTOR_ANY, 384, fft_pfa_init, avx2, AVX2,
AV_TX_INPLACE | FF_TX_PRESHUFFLE | FF_TX_ASM_CALL, AV_CPU_FLAG_AVXSLOW | AV_CPU_FLAG_SLOW_GATHER),
TX_DEF(fft_pfa_15xM_ns, FFT, 60, TX_LEN_UNLIMITED, 15, TX_FACTOR_ANY, 384, fft_pfa_init, avx2, AVX2,
AV_TX_INPLACE | FF_TX_PRESHUFFLE, AV_CPU_FLAG_AVXSLOW | AV_CPU_FLAG_SLOW_GATHER),
x86/tx_float: generalize iMDCT To support non-aligned buffers during the post-transform step, just iterate backwards over the array. This allows using the 15xN-point FFT, with which the speed is 2.1 times faster than our old libavcodec implementation.
2022-09-23 10:38:29 +02:00
TX_DEF(mdct_inv, MDCT, 16, TX_LEN_UNLIMITED, 2, TX_FACTOR_ANY, 384, m_inv_init, avx2, AVX2,
x86/tx_float: implement inverse MDCT AVX2 assembly This commit implements an iMDCT in pure assembly. This is capable of processing any mod-8 transforms, rather than just power of two, but since power of two is all we have assembly for currently, that's what's supported. It would really benefit if we could somehow use the C code to decide which function to jump into, but exposing function labels from assebly into C is anything but easy. The post-transform loop could probably be improved. This was somewhat annoying to write, as we must support arbitrary strides during runtime. There's a fast branch for stride == 4 bytes and a slower one which uses vgatherdps. Zen 3 benchmarks for stride == 4 for old (av_imdct_half) vs new (av_tx): 128pt: 2811 decicycles in av_tx (imdct),16775916 runs, 1300 skips 3082 decicycles in av_imdct_half,16776751 runs, 465 skips 256pt: 4920 decicycles in av_tx (imdct),16775820 runs, 1396 skips 5378 decicycles in av_imdct_half,16776411 runs, 805 skips 512pt: 9668 decicycles in av_tx (imdct),16775774 runs, 1442 skips 10626 decicycles in av_imdct_half,16775647 runs, 1569 skips 1024pt: 19812 decicycles in av_tx (imdct),16777144 runs, 72 skips 23036 decicycles in av_imdct_half,16777167 runs, 49 skips
2022-09-03 03:36:40 +02:00
FF_TX_INVERSE_ONLY, AV_CPU_FLAG_AVXSLOW | AV_CPU_FLAG_SLOW_GATHER),
Revert "x86/tx_float: remove vgatherdpd usage" This reverts commit 82a68a8771ca39564f6a74e0f875d6852e7a0c2a. Smarter slow ISA penalties makes gathers still useful. The intention is to use gathers with the final stage of non-ptwo iMDCTs, where they give benefit.
2022-05-21 00:05:58 +02:00
#endif
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 08:14:46 +02:00
#endif
lavu/x86: add FFT assembly This commit adds a pure x86 assembly SIMD version of the FFT in libavutil/tx. The design of this pure assembly FFT is pretty unconventional. On the lowest level, instead of splitting the complex numbers into real and imaginary parts, we keep complex numbers together but split them in terms of parity. This saves a number of shuffles in each transform, but more importantly, it splits each transform into two independent paths, which we process using separate registers in parallel. This allows us to keep all units saturated and lets us use all available registers to avoid dependencies. Moreover, it allows us to double the granularity of our per-load permutation, skipping many expensive lookups and allowing us to use just 4 loads per register, rather than 8, or in case FMA3 (and by extension, AVX2), use the vgatherdpd instruction, which is at least as fast as 4 separate loads on old hardware, and quite a bit faster on modern CPUs). Higher up, we go for a bottom-up construction of large transforms, foregoing the traditional per-transform call-return recursion chains. Instead, we always start at the bottom-most basis transform (in this case, a 32-point transform), and continue constructing larger and larger transforms until we return to the top-most transform. This way, we only touch the stack 3 times per a complete target transform: once for the 1/2 length transform and two times for the 1/4 length transform. The combination algorithm we use is a standard Split-Radix algorithm, as used in our C code. Although a version with less operations exists (Steven G. Johnson and Matteo Frigo's "A modified split-radix FFT with fewer arithmetic operations", IEEE Trans. Signal Process. 55 (1), 111–119 (2007), which is the one FFTW uses), it only has 2% less operations and requires at least 4x the binary code (due to it needing 4 different paths to do a single transform). That version also has other issues which prevent it from being implemented with SIMD code as efficiently, which makes it lose the marginal gains it offered, and cannot be performed bottom-up, requiring many recursive call-return chains, whose overhead adds up. We go through a lot of effort to minimize load/stores by keeping as much in registers in between construcring transforms. This saves us around 32 cycles, on paper, but in reality a lot more due to load/store aliasing (a load from a memory location cannot be issued while there's a store pending, and there are only so many (2 for Zen 3) load/store units in a CPU). Also, we interleave coefficients during the last stage to save on a store+load per register. Each of the smallest, basis transforms (4, 8 and 16-point in our case) has been extremely optimized. Our 8-point transform is barely 20 instructions in total, beating our old implementation 8-point transform by 1 instruction. Our 2x8-point transform is 23 instructions, beating our old implementation by 6 instruction and needing 50% less cycles. Our 16-point transform's combination code takes slightly more instructions than our old implementation, but makes up for it by requiring a lot less arithmetic operations. Overall, the transform was optimized for the timings of Zen 3, which at the time of writing has the most IPC from all documented CPUs. Shuffles were preferred over arithmetic operations due to their 1/0.5 latency/throughput. On average, this code is 30% faster than our old libavcodec implementation. It's able to trade blows with the previously-untouchable FFTW on small transforms, and due to its tiny size and better prediction, outdoes FFTW on larger transforms by 11% on the largest currently supported size.
2021-04-10 03:54:22 +02:00
lavu/tx: rewrite internal code as a tree-based codelet constructor This commit rewrites the internal transform code into a constructor that stitches transforms (codelets). This allows for transforms to reuse arbitrary parts of other transforms, and allows transforms to be stacked onto one another (such as a full iMDCT using a half-iMDCT which in turn uses an FFT). It also permits for each step to be individually replaced by assembly or a custom implementation (such as an ASIC).
2022-01-20 08:14:46 +02:00
NULL,
};
Reference in New Issue Copy Permalink