1
0
mirror of https://github.com/FFmpeg/FFmpeg.git synced 2024-11-26 19:01:44 +02:00
FFmpeg/libavcodec/cbs_mpeg2.c

439 lines
14 KiB
C
Raw Normal View History

/*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "libavutil/avassert.h"
#include "cbs.h"
#include "cbs_internal.h"
#include "cbs_mpeg2.h"
#include "startcode.h"
#define HEADER(name) do { \
ff_cbs_trace_header(ctx, name); \
} while (0)
#define CHECK(call) do { \
err = (call); \
if (err < 0) \
return err; \
} while (0)
#define FUNC_NAME(rw, codec, name) cbs_ ## codec ## _ ## rw ## _ ## name
#define FUNC_MPEG2(rw, name) FUNC_NAME(rw, mpeg2, name)
#define FUNC(name) FUNC_MPEG2(READWRITE, name)
#define SUBSCRIPTS(subs, ...) (subs > 0 ? ((int[subs + 1]){ subs, __VA_ARGS__ }) : NULL)
#define uir(width, name) \
avcodec/cbs: Avoid leaving the ... out in calls to variadic macros According to C99, there has to be at least one argument for every ... in a variadic function-like macro. In practice most (all?) compilers also allow to leave it completely out, but it is nevertheless required: In a variadic macro "there shall be more arguments in the invocation than there are parameters in the macro definition (excluding the ...)." (C99, 6.10.3.4). CBS (not the framework itself, but the macros used in the cbs_*_syntax_template.c files) relies on the compiler allowing to leave a variadic macro argument out. This leads to warnings when compiling in -pedantic mode, e.g. "warning: must specify at least one argument for '...' parameter of variadic macro [-Wgnu-zero-variadic-macro-arguments]" from Clang. Most of these warnings can be easily avoided: The syntax_templates mostly contain helper macros that expand to more complex variadic macros and these helper macros often omit an argument for the .... Modifying them to always expand to complex macros with an empty argument for the ... at the end fixes most of these warnings: The number of warnings went down from 400 to 0 for cbs_av1, from 1114 to 32 for cbs_h2645, from 38 to 0 for cbs_jpeg, from 166 to 0 for cbs_mpeg2 and from 110 to 8 for cbs_vp9. These eight remaining warnings for cbs_vp9 have been fixed by switching to another macro in cbs_vp9_syntax_template: The fixed values for the sync bytes as well as the trailing bits for byte-alignment are now read via the fixed() macro (this also adds a check to ensure that trailing bits are indeed zero as they have to be). Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-03-22 21:34:21 +02:00
xui(width, name, current->name, 1, MAX_UINT_BITS(width), 0, )
#define uis(width, name, subs, ...) \
xui(width, name, current->name, 0, MAX_UINT_BITS(width), subs, __VA_ARGS__)
#define uirs(width, name, subs, ...) \
xui(width, name, current->name, 1, MAX_UINT_BITS(width), subs, __VA_ARGS__)
cbs_mpeg2: Fix parsing of picture and slice headers 1. The extra information in slice headers was parsed incorrectly: In the first reading pass to derive the length of the extra information, one should look at bits n, n + 9, n + 18, ... and check whether they equal one (further extra information) or zero (end of extra information), but instead bits n, n + 8, n + 16, ... were inspected. The second pass of reading (where the length is already known and the bytes between the length-determining bits are copied into a buffer) did not record what was in bits n, n + 9, n + 18, ..., presuming they equal one. And during writing, the bytes in the buffer are interleaved with set bits and written. This means that if the detected length of the extra information was greater than the real length, the output was corrupted. Fortunately no sample is known that made use of this mechanism: The extra information in slices is still marked as reserved in the specifications. cbs_mpeg2 is now ready in case this changes. 2. Furthermore, the buffer is now padded and slightly different, but very similar code for reading resp. writing has been replaced by code used for both. This was made possible by a new macro, the equivalent to cbs_h2645's fixed(). 3. These changes also made it possible to remove the extra_bit_slice element from the MPEG2RawSliceHeader structure. Said element was always zero except when the detected length of the extra information was less than the real length. 4. The extra information in picture headers (which uses essentially the same syntax as the extra information in slice headers) has simply been forgotten. This meant that if this extra information was present, it was discarded during reading; and unfortunately writing created invalid bitstreams in this case (an extra_bit_picture - the last set bit of the whole unit - indicated that there would be a further byte of data, although the output didn't contain said data). This has been fixed; both types of extra information are now parsed via the same code and essentially passed through. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-06-20 01:45:12 +02:00
#define xui(width, name, var, range_min, range_max, subs, ...) \
xuia(width, #name, var, range_min, range_max, subs, __VA_ARGS__)
#define sis(width, name, subs, ...) \
xsi(width, name, current->name, subs, __VA_ARGS__)
cbs_mpeg2: Fix parsing of picture and slice headers 1. The extra information in slice headers was parsed incorrectly: In the first reading pass to derive the length of the extra information, one should look at bits n, n + 9, n + 18, ... and check whether they equal one (further extra information) or zero (end of extra information), but instead bits n, n + 8, n + 16, ... were inspected. The second pass of reading (where the length is already known and the bytes between the length-determining bits are copied into a buffer) did not record what was in bits n, n + 9, n + 18, ..., presuming they equal one. And during writing, the bytes in the buffer are interleaved with set bits and written. This means that if the detected length of the extra information was greater than the real length, the output was corrupted. Fortunately no sample is known that made use of this mechanism: The extra information in slices is still marked as reserved in the specifications. cbs_mpeg2 is now ready in case this changes. 2. Furthermore, the buffer is now padded and slightly different, but very similar code for reading resp. writing has been replaced by code used for both. This was made possible by a new macro, the equivalent to cbs_h2645's fixed(). 3. These changes also made it possible to remove the extra_bit_slice element from the MPEG2RawSliceHeader structure. Said element was always zero except when the detected length of the extra information was less than the real length. 4. The extra information in picture headers (which uses essentially the same syntax as the extra information in slice headers) has simply been forgotten. This meant that if this extra information was present, it was discarded during reading; and unfortunately writing created invalid bitstreams in this case (an extra_bit_picture - the last set bit of the whole unit - indicated that there would be a further byte of data, although the output didn't contain said data). This has been fixed; both types of extra information are now parsed via the same code and essentially passed through. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-06-20 01:45:12 +02:00
#define marker_bit() \
bit("marker_bit", 1)
#define bit(string, value) do { \
av_unused uint32_t bit = value; \
avcodec/cbs: Avoid leaving the ... out in calls to variadic macros According to C99, there has to be at least one argument for every ... in a variadic function-like macro. In practice most (all?) compilers also allow to leave it completely out, but it is nevertheless required: In a variadic macro "there shall be more arguments in the invocation than there are parameters in the macro definition (excluding the ...)." (C99, 6.10.3.4). CBS (not the framework itself, but the macros used in the cbs_*_syntax_template.c files) relies on the compiler allowing to leave a variadic macro argument out. This leads to warnings when compiling in -pedantic mode, e.g. "warning: must specify at least one argument for '...' parameter of variadic macro [-Wgnu-zero-variadic-macro-arguments]" from Clang. Most of these warnings can be easily avoided: The syntax_templates mostly contain helper macros that expand to more complex variadic macros and these helper macros often omit an argument for the .... Modifying them to always expand to complex macros with an empty argument for the ... at the end fixes most of these warnings: The number of warnings went down from 400 to 0 for cbs_av1, from 1114 to 32 for cbs_h2645, from 38 to 0 for cbs_jpeg, from 166 to 0 for cbs_mpeg2 and from 110 to 8 for cbs_vp9. These eight remaining warnings for cbs_vp9 have been fixed by switching to another macro in cbs_vp9_syntax_template: The fixed values for the sync bytes as well as the trailing bits for byte-alignment are now read via the fixed() macro (this also adds a check to ensure that trailing bits are indeed zero as they have to be). Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-03-22 21:34:21 +02:00
xuia(1, string, bit, value, value, 0, ); \
cbs_mpeg2: Fix parsing of picture and slice headers 1. The extra information in slice headers was parsed incorrectly: In the first reading pass to derive the length of the extra information, one should look at bits n, n + 9, n + 18, ... and check whether they equal one (further extra information) or zero (end of extra information), but instead bits n, n + 8, n + 16, ... were inspected. The second pass of reading (where the length is already known and the bytes between the length-determining bits are copied into a buffer) did not record what was in bits n, n + 9, n + 18, ..., presuming they equal one. And during writing, the bytes in the buffer are interleaved with set bits and written. This means that if the detected length of the extra information was greater than the real length, the output was corrupted. Fortunately no sample is known that made use of this mechanism: The extra information in slices is still marked as reserved in the specifications. cbs_mpeg2 is now ready in case this changes. 2. Furthermore, the buffer is now padded and slightly different, but very similar code for reading resp. writing has been replaced by code used for both. This was made possible by a new macro, the equivalent to cbs_h2645's fixed(). 3. These changes also made it possible to remove the extra_bit_slice element from the MPEG2RawSliceHeader structure. Said element was always zero except when the detected length of the extra information was less than the real length. 4. The extra information in picture headers (which uses essentially the same syntax as the extra information in slice headers) has simply been forgotten. This meant that if this extra information was present, it was discarded during reading; and unfortunately writing created invalid bitstreams in this case (an extra_bit_picture - the last set bit of the whole unit - indicated that there would be a further byte of data, although the output didn't contain said data). This has been fixed; both types of extra information are now parsed via the same code and essentially passed through. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-06-20 01:45:12 +02:00
} while (0)
#define READ
#define READWRITE read
#define RWContext GetBitContext
#define ui(width, name) do { \
uint32_t value; \
CHECK(ff_cbs_read_simple_unsigned(ctx, rw, width, #name, \
&value)); \
current->name = value; \
} while (0)
cbs_mpeg2: Fix parsing of picture and slice headers 1. The extra information in slice headers was parsed incorrectly: In the first reading pass to derive the length of the extra information, one should look at bits n, n + 9, n + 18, ... and check whether they equal one (further extra information) or zero (end of extra information), but instead bits n, n + 8, n + 16, ... were inspected. The second pass of reading (where the length is already known and the bytes between the length-determining bits are copied into a buffer) did not record what was in bits n, n + 9, n + 18, ..., presuming they equal one. And during writing, the bytes in the buffer are interleaved with set bits and written. This means that if the detected length of the extra information was greater than the real length, the output was corrupted. Fortunately no sample is known that made use of this mechanism: The extra information in slices is still marked as reserved in the specifications. cbs_mpeg2 is now ready in case this changes. 2. Furthermore, the buffer is now padded and slightly different, but very similar code for reading resp. writing has been replaced by code used for both. This was made possible by a new macro, the equivalent to cbs_h2645's fixed(). 3. These changes also made it possible to remove the extra_bit_slice element from the MPEG2RawSliceHeader structure. Said element was always zero except when the detected length of the extra information was less than the real length. 4. The extra information in picture headers (which uses essentially the same syntax as the extra information in slice headers) has simply been forgotten. This meant that if this extra information was present, it was discarded during reading; and unfortunately writing created invalid bitstreams in this case (an extra_bit_picture - the last set bit of the whole unit - indicated that there would be a further byte of data, although the output didn't contain said data). This has been fixed; both types of extra information are now parsed via the same code and essentially passed through. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-06-20 01:45:12 +02:00
#define xuia(width, string, var, range_min, range_max, subs, ...) do { \
uint32_t value; \
cbs_mpeg2: Fix parsing of picture and slice headers 1. The extra information in slice headers was parsed incorrectly: In the first reading pass to derive the length of the extra information, one should look at bits n, n + 9, n + 18, ... and check whether they equal one (further extra information) or zero (end of extra information), but instead bits n, n + 8, n + 16, ... were inspected. The second pass of reading (where the length is already known and the bytes between the length-determining bits are copied into a buffer) did not record what was in bits n, n + 9, n + 18, ..., presuming they equal one. And during writing, the bytes in the buffer are interleaved with set bits and written. This means that if the detected length of the extra information was greater than the real length, the output was corrupted. Fortunately no sample is known that made use of this mechanism: The extra information in slices is still marked as reserved in the specifications. cbs_mpeg2 is now ready in case this changes. 2. Furthermore, the buffer is now padded and slightly different, but very similar code for reading resp. writing has been replaced by code used for both. This was made possible by a new macro, the equivalent to cbs_h2645's fixed(). 3. These changes also made it possible to remove the extra_bit_slice element from the MPEG2RawSliceHeader structure. Said element was always zero except when the detected length of the extra information was less than the real length. 4. The extra information in picture headers (which uses essentially the same syntax as the extra information in slice headers) has simply been forgotten. This meant that if this extra information was present, it was discarded during reading; and unfortunately writing created invalid bitstreams in this case (an extra_bit_picture - the last set bit of the whole unit - indicated that there would be a further byte of data, although the output didn't contain said data). This has been fixed; both types of extra information are now parsed via the same code and essentially passed through. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-06-20 01:45:12 +02:00
CHECK(ff_cbs_read_unsigned(ctx, rw, width, string, \
SUBSCRIPTS(subs, __VA_ARGS__), \
&value, range_min, range_max)); \
var = value; \
} while (0)
#define xsi(width, name, var, subs, ...) do { \
int32_t value; \
CHECK(ff_cbs_read_signed(ctx, rw, width, #name, \
SUBSCRIPTS(subs, __VA_ARGS__), &value, \
MIN_INT_BITS(width), \
MAX_INT_BITS(width))); \
var = value; \
} while (0)
#define nextbits(width, compare, var) \
(get_bits_left(rw) >= width && \
(var = show_bits(rw, width)) == (compare))
#define infer(name, value) do { \
current->name = value; \
} while (0)
#include "cbs_mpeg2_syntax_template.c"
#undef READ
#undef READWRITE
#undef RWContext
#undef ui
cbs_mpeg2: Fix parsing of picture and slice headers 1. The extra information in slice headers was parsed incorrectly: In the first reading pass to derive the length of the extra information, one should look at bits n, n + 9, n + 18, ... and check whether they equal one (further extra information) or zero (end of extra information), but instead bits n, n + 8, n + 16, ... were inspected. The second pass of reading (where the length is already known and the bytes between the length-determining bits are copied into a buffer) did not record what was in bits n, n + 9, n + 18, ..., presuming they equal one. And during writing, the bytes in the buffer are interleaved with set bits and written. This means that if the detected length of the extra information was greater than the real length, the output was corrupted. Fortunately no sample is known that made use of this mechanism: The extra information in slices is still marked as reserved in the specifications. cbs_mpeg2 is now ready in case this changes. 2. Furthermore, the buffer is now padded and slightly different, but very similar code for reading resp. writing has been replaced by code used for both. This was made possible by a new macro, the equivalent to cbs_h2645's fixed(). 3. These changes also made it possible to remove the extra_bit_slice element from the MPEG2RawSliceHeader structure. Said element was always zero except when the detected length of the extra information was less than the real length. 4. The extra information in picture headers (which uses essentially the same syntax as the extra information in slice headers) has simply been forgotten. This meant that if this extra information was present, it was discarded during reading; and unfortunately writing created invalid bitstreams in this case (an extra_bit_picture - the last set bit of the whole unit - indicated that there would be a further byte of data, although the output didn't contain said data). This has been fixed; both types of extra information are now parsed via the same code and essentially passed through. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-06-20 01:45:12 +02:00
#undef xuia
#undef xsi
#undef nextbits
#undef infer
#define WRITE
#define READWRITE write
#define RWContext PutBitContext
#define ui(width, name) do { \
CHECK(ff_cbs_write_simple_unsigned(ctx, rw, width, #name, \
current->name)); \
} while (0)
cbs_mpeg2: Fix parsing of picture and slice headers 1. The extra information in slice headers was parsed incorrectly: In the first reading pass to derive the length of the extra information, one should look at bits n, n + 9, n + 18, ... and check whether they equal one (further extra information) or zero (end of extra information), but instead bits n, n + 8, n + 16, ... were inspected. The second pass of reading (where the length is already known and the bytes between the length-determining bits are copied into a buffer) did not record what was in bits n, n + 9, n + 18, ..., presuming they equal one. And during writing, the bytes in the buffer are interleaved with set bits and written. This means that if the detected length of the extra information was greater than the real length, the output was corrupted. Fortunately no sample is known that made use of this mechanism: The extra information in slices is still marked as reserved in the specifications. cbs_mpeg2 is now ready in case this changes. 2. Furthermore, the buffer is now padded and slightly different, but very similar code for reading resp. writing has been replaced by code used for both. This was made possible by a new macro, the equivalent to cbs_h2645's fixed(). 3. These changes also made it possible to remove the extra_bit_slice element from the MPEG2RawSliceHeader structure. Said element was always zero except when the detected length of the extra information was less than the real length. 4. The extra information in picture headers (which uses essentially the same syntax as the extra information in slice headers) has simply been forgotten. This meant that if this extra information was present, it was discarded during reading; and unfortunately writing created invalid bitstreams in this case (an extra_bit_picture - the last set bit of the whole unit - indicated that there would be a further byte of data, although the output didn't contain said data). This has been fixed; both types of extra information are now parsed via the same code and essentially passed through. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-06-20 01:45:12 +02:00
#define xuia(width, string, var, range_min, range_max, subs, ...) do { \
CHECK(ff_cbs_write_unsigned(ctx, rw, width, string, \
SUBSCRIPTS(subs, __VA_ARGS__), \
var, range_min, range_max)); \
} while (0)
#define xsi(width, name, var, subs, ...) do { \
CHECK(ff_cbs_write_signed(ctx, rw, width, #name, \
SUBSCRIPTS(subs, __VA_ARGS__), var, \
MIN_INT_BITS(width), \
MAX_INT_BITS(width))); \
} while (0)
#define nextbits(width, compare, var) (var)
#define infer(name, value) do { \
if (current->name != (value)) { \
av_log(ctx->log_ctx, AV_LOG_WARNING, "Warning: " \
"%s does not match inferred value: " \
"%"PRId64", but should be %"PRId64".\n", \
#name, (int64_t)current->name, (int64_t)(value)); \
} \
} while (0)
#include "cbs_mpeg2_syntax_template.c"
#undef WRITE
#undef READWRITE
#undef RWContext
#undef ui
cbs_mpeg2: Fix parsing of picture and slice headers 1. The extra information in slice headers was parsed incorrectly: In the first reading pass to derive the length of the extra information, one should look at bits n, n + 9, n + 18, ... and check whether they equal one (further extra information) or zero (end of extra information), but instead bits n, n + 8, n + 16, ... were inspected. The second pass of reading (where the length is already known and the bytes between the length-determining bits are copied into a buffer) did not record what was in bits n, n + 9, n + 18, ..., presuming they equal one. And during writing, the bytes in the buffer are interleaved with set bits and written. This means that if the detected length of the extra information was greater than the real length, the output was corrupted. Fortunately no sample is known that made use of this mechanism: The extra information in slices is still marked as reserved in the specifications. cbs_mpeg2 is now ready in case this changes. 2. Furthermore, the buffer is now padded and slightly different, but very similar code for reading resp. writing has been replaced by code used for both. This was made possible by a new macro, the equivalent to cbs_h2645's fixed(). 3. These changes also made it possible to remove the extra_bit_slice element from the MPEG2RawSliceHeader structure. Said element was always zero except when the detected length of the extra information was less than the real length. 4. The extra information in picture headers (which uses essentially the same syntax as the extra information in slice headers) has simply been forgotten. This meant that if this extra information was present, it was discarded during reading; and unfortunately writing created invalid bitstreams in this case (an extra_bit_picture - the last set bit of the whole unit - indicated that there would be a further byte of data, although the output didn't contain said data). This has been fixed; both types of extra information are now parsed via the same code and essentially passed through. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-06-20 01:45:12 +02:00
#undef xuia
#undef xsi
#undef nextbits
#undef infer
static int cbs_mpeg2_split_fragment(CodedBitstreamContext *ctx,
CodedBitstreamFragment *frag,
int header)
{
const uint8_t *start;
uint32_t start_code = -1;
int err;
start = avpriv_find_start_code(frag->data, frag->data + frag->data_size,
&start_code);
if (start_code >> 8 != 0x000001) {
// No start code found.
return AVERROR_INVALIDDATA;
}
do {
CodedBitstreamUnitType unit_type = start_code & 0xff;
const uint8_t *end;
size_t unit_size;
// Reset start_code to ensure that avpriv_find_start_code()
// really reads a new start code and does not reuse the old
// start code in any way (as e.g. happens when there is a
// Sequence End unit at the very end of a packet).
start_code = UINT32_MAX;
end = avpriv_find_start_code(start--, frag->data + frag->data_size,
&start_code);
// start points to the byte containing the start_code_identifier
// (may be the last byte of fragment->data); end points to the byte
// following the byte containing the start code identifier (or to
// the end of fragment->data).
if (start_code >> 8 == 0x000001) {
// Unit runs from start to the beginning of the start code
// pointed to by end (including any padding zeroes).
unit_size = (end - 4) - start;
} else {
// We didn't find a start code, so this is the final unit.
unit_size = end - start;
}
err = ff_cbs_append_unit_data(frag, unit_type, (uint8_t*)start,
unit_size, frag->data_ref);
if (err < 0)
return err;
start = end;
// Do we have a further unit to add to the fragment?
} while ((start_code >> 8) == 0x000001);
return 0;
}
static int cbs_mpeg2_read_unit(CodedBitstreamContext *ctx,
CodedBitstreamUnit *unit)
{
GetBitContext gbc;
int err;
err = init_get_bits(&gbc, unit->data, 8 * unit->data_size);
if (err < 0)
return err;
err = ff_cbs_alloc_unit_content(ctx, unit);
2020-07-27 18:32:27 +02:00
if (err < 0)
return err;
if (MPEG2_START_IS_SLICE(unit->type)) {
2020-07-27 18:32:27 +02:00
MPEG2RawSlice *slice = unit->content;
int pos, len;
err = cbs_mpeg2_read_slice_header(ctx, &gbc, &slice->header);
if (err < 0)
return err;
if (!get_bits_left(&gbc))
return AVERROR_INVALIDDATA;
pos = get_bits_count(&gbc);
len = unit->data_size;
slice->data_size = len - pos / 8;
slice->data_ref = av_buffer_ref(unit->data_ref);
if (!slice->data_ref)
return AVERROR(ENOMEM);
slice->data = unit->data + pos / 8;
slice->data_bit_start = pos % 8;
} else {
switch (unit->type) {
#define START(start_code, type, read_func, free_func) \
case start_code: \
{ \
2020-07-27 18:32:27 +02:00
type *header = unit->content; \
err = cbs_mpeg2_read_ ## read_func(ctx, &gbc, header); \
if (err < 0) \
return err; \
} \
break;
START(MPEG2_START_PICTURE, MPEG2RawPictureHeader,
cbs_mpeg2: Fix parsing of picture and slice headers 1. The extra information in slice headers was parsed incorrectly: In the first reading pass to derive the length of the extra information, one should look at bits n, n + 9, n + 18, ... and check whether they equal one (further extra information) or zero (end of extra information), but instead bits n, n + 8, n + 16, ... were inspected. The second pass of reading (where the length is already known and the bytes between the length-determining bits are copied into a buffer) did not record what was in bits n, n + 9, n + 18, ..., presuming they equal one. And during writing, the bytes in the buffer are interleaved with set bits and written. This means that if the detected length of the extra information was greater than the real length, the output was corrupted. Fortunately no sample is known that made use of this mechanism: The extra information in slices is still marked as reserved in the specifications. cbs_mpeg2 is now ready in case this changes. 2. Furthermore, the buffer is now padded and slightly different, but very similar code for reading resp. writing has been replaced by code used for both. This was made possible by a new macro, the equivalent to cbs_h2645's fixed(). 3. These changes also made it possible to remove the extra_bit_slice element from the MPEG2RawSliceHeader structure. Said element was always zero except when the detected length of the extra information was less than the real length. 4. The extra information in picture headers (which uses essentially the same syntax as the extra information in slice headers) has simply been forgotten. This meant that if this extra information was present, it was discarded during reading; and unfortunately writing created invalid bitstreams in this case (an extra_bit_picture - the last set bit of the whole unit - indicated that there would be a further byte of data, although the output didn't contain said data). This has been fixed; both types of extra information are now parsed via the same code and essentially passed through. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-06-20 01:45:12 +02:00
picture_header, &cbs_mpeg2_free_picture_header);
START(MPEG2_START_USER_DATA, MPEG2RawUserData,
user_data, &cbs_mpeg2_free_user_data);
START(MPEG2_START_SEQUENCE_HEADER, MPEG2RawSequenceHeader,
sequence_header, NULL);
START(MPEG2_START_EXTENSION, MPEG2RawExtensionData,
extension_data, NULL);
START(MPEG2_START_GROUP, MPEG2RawGroupOfPicturesHeader,
group_of_pictures_header, NULL);
START(MPEG2_START_SEQUENCE_END, MPEG2RawSequenceEnd,
sequence_end, NULL);
#undef START
default:
return AVERROR(ENOSYS);
}
}
return 0;
}
static int cbs_mpeg2_write_header(CodedBitstreamContext *ctx,
CodedBitstreamUnit *unit,
PutBitContext *pbc)
{
int err;
switch (unit->type) {
#define START(start_code, type, func) \
case start_code: \
err = cbs_mpeg2_write_ ## func(ctx, pbc, unit->content); \
break;
START(MPEG2_START_PICTURE, MPEG2RawPictureHeader, picture_header);
START(MPEG2_START_USER_DATA, MPEG2RawUserData, user_data);
START(MPEG2_START_SEQUENCE_HEADER, MPEG2RawSequenceHeader, sequence_header);
START(MPEG2_START_EXTENSION, MPEG2RawExtensionData, extension_data);
START(MPEG2_START_GROUP, MPEG2RawGroupOfPicturesHeader,
group_of_pictures_header);
START(MPEG2_START_SEQUENCE_END, MPEG2RawSequenceEnd, sequence_end);
#undef START
default:
av_log(ctx->log_ctx, AV_LOG_ERROR, "Write unimplemented for start "
"code %02"PRIx32".\n", unit->type);
return AVERROR_PATCHWELCOME;
}
return err;
}
static int cbs_mpeg2_write_slice(CodedBitstreamContext *ctx,
CodedBitstreamUnit *unit,
PutBitContext *pbc)
{
MPEG2RawSlice *slice = unit->content;
int err;
err = cbs_mpeg2_write_slice_header(ctx, pbc, &slice->header);
if (err < 0)
return err;
if (slice->data) {
size_t rest = slice->data_size - (slice->data_bit_start + 7) / 8;
uint8_t *pos = slice->data + slice->data_bit_start / 8;
av_assert0(slice->data_bit_start >= 0 &&
slice->data_size > slice->data_bit_start / 8);
if (slice->data_size * 8 + 8 > put_bits_left(pbc))
return AVERROR(ENOSPC);
// First copy the remaining bits of the first byte
if (slice->data_bit_start % 8)
put_bits(pbc, 8 - slice->data_bit_start % 8,
*pos++ & MAX_UINT_BITS(8 - slice->data_bit_start % 8));
if (put_bits_count(pbc) % 8 == 0) {
// If the writer is aligned at this point,
// memcpy can be used to improve performance.
// This is the normal case.
flush_put_bits(pbc);
memcpy(put_bits_ptr(pbc), pos, rest);
skip_put_bytes(pbc, rest);
} else {
// If not, we have to copy manually:
for (; rest > 3; rest -= 4, pos += 4)
put_bits32(pbc, AV_RB32(pos));
for (; rest; rest--, pos++)
put_bits(pbc, 8, *pos);
// Align with zeros
put_bits(pbc, 8 - put_bits_count(pbc) % 8, 0);
}
}
return 0;
}
static int cbs_mpeg2_write_unit(CodedBitstreamContext *ctx,
CodedBitstreamUnit *unit,
PutBitContext *pbc)
{
if (MPEG2_START_IS_SLICE(unit->type))
return cbs_mpeg2_write_slice (ctx, unit, pbc);
else
return cbs_mpeg2_write_header(ctx, unit, pbc);
}
static int cbs_mpeg2_assemble_fragment(CodedBitstreamContext *ctx,
CodedBitstreamFragment *frag)
{
uint8_t *data;
size_t size, dp;
int i;
size = 0;
for (i = 0; i < frag->nb_units; i++)
size += 3 + frag->units[i].data_size;
frag->data_ref = av_buffer_alloc(size + AV_INPUT_BUFFER_PADDING_SIZE);
if (!frag->data_ref)
return AVERROR(ENOMEM);
data = frag->data_ref->data;
dp = 0;
for (i = 0; i < frag->nb_units; i++) {
CodedBitstreamUnit *unit = &frag->units[i];
data[dp++] = 0;
data[dp++] = 0;
data[dp++] = 1;
memcpy(data + dp, unit->data, unit->data_size);
dp += unit->data_size;
}
av_assert0(dp == size);
memset(data + size, 0, AV_INPUT_BUFFER_PADDING_SIZE);
frag->data = data;
frag->data_size = size;
return 0;
}
2020-07-27 18:32:27 +02:00
static const CodedBitstreamUnitTypeDescriptor cbs_mpeg2_unit_types[] = {
CBS_UNIT_TYPE_INTERNAL_REF(MPEG2_START_PICTURE, MPEG2RawPictureHeader,
extra_information_picture.extra_information),
{
.nb_unit_types = CBS_UNIT_TYPE_RANGE,
.unit_type.range.start = 0x01,
.unit_type.range.end = 0xaf,
2020-07-27 18:32:27 +02:00
.content_type = CBS_CONTENT_TYPE_INTERNAL_REFS,
.content_size = sizeof(MPEG2RawSlice),
.type.ref = { .nb_offsets = 2,
.offsets = { offsetof(MPEG2RawSlice, header.extra_information_slice.extra_information),
offsetof(MPEG2RawSlice, data) } },
2020-07-27 18:32:27 +02:00
},
CBS_UNIT_TYPE_INTERNAL_REF(MPEG2_START_USER_DATA, MPEG2RawUserData,
user_data),
CBS_UNIT_TYPE_POD(MPEG2_START_SEQUENCE_HEADER, MPEG2RawSequenceHeader),
CBS_UNIT_TYPE_POD(MPEG2_START_EXTENSION, MPEG2RawExtensionData),
CBS_UNIT_TYPE_POD(MPEG2_START_SEQUENCE_END, MPEG2RawSequenceEnd),
CBS_UNIT_TYPE_POD(MPEG2_START_GROUP, MPEG2RawGroupOfPicturesHeader),
CBS_UNIT_TYPE_END_OF_LIST
};
const CodedBitstreamType ff_cbs_type_mpeg2 = {
.codec_id = AV_CODEC_ID_MPEG2VIDEO,
.priv_data_size = sizeof(CodedBitstreamMPEG2Context),
2020-07-27 18:32:27 +02:00
.unit_types = cbs_mpeg2_unit_types,
.split_fragment = &cbs_mpeg2_split_fragment,
.read_unit = &cbs_mpeg2_read_unit,
.write_unit = &cbs_mpeg2_write_unit,
.assemble_fragment = &cbs_mpeg2_assemble_fragment,
};