1
0
mirror of https://github.com/FFmpeg/FFmpeg.git synced 2024-11-26 19:01:44 +02:00
FFmpeg/libavcodec/vlc.h

140 lines
6.8 KiB
C
Raw Normal View History

/*
2016-06-23 00:42:16 +02:00
* This file is part of FFmpeg.
*
2016-06-23 00:42:16 +02:00
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
2016-06-23 00:42:16 +02:00
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
2016-06-23 00:42:16 +02:00
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef AVCODEC_VLC_H
#define AVCODEC_VLC_H
#include <stdint.h>
#define VLC_TYPE int16_t
typedef struct VLC {
int bits;
VLC_TYPE (*table)[2]; ///< code, bits
int table_size, table_allocated;
} VLC;
typedef struct RL_VLC_ELEM {
int16_t level;
int8_t len;
uint8_t run;
} RL_VLC_ELEM;
#define init_vlc(vlc, nb_bits, nb_codes, \
bits, bits_wrap, bits_size, \
codes, codes_wrap, codes_size, \
flags) \
ff_init_vlc_sparse(vlc, nb_bits, nb_codes, \
bits, bits_wrap, bits_size, \
codes, codes_wrap, codes_size, \
NULL, 0, 0, flags)
int ff_init_vlc_sparse(VLC *vlc, int nb_bits, int nb_codes,
const void *bits, int bits_wrap, int bits_size,
const void *codes, int codes_wrap, int codes_size,
const void *symbols, int symbols_wrap, int symbols_size,
int flags);
avcodec/bitstream: Add second function to create VLCs When using ff_init_vlc_sparse() to create a VLC, three input tables are used: A table for lengths, one for codes and one for symbols; the latter one can be omitted, then a default one will be used. These input tables will be traversed twice, once to get the long codes (which will be put into subtables) and once for the small codes. The long codes are then sorted so that entries that should be in the same subtable are contiguous. This commit adds an alternative to ff_init_vlc_sparse(): ff_init_vlc_from_lengths(). It is based upon the observation that if lengths, codes and symbols tables are permuted (in the same way) so that the codes are ordered from left to right in the corresponding tree and if said tree is complete (i.e. every non-leaf node has two children), the codes can be easily computed from the lengths and are therefore redundant. This means that if one initializes such a VLC with explicitly coded lengths, codes and symbols, the codes can be avoided; and even if one has no explicitly coded symbols, it might still be beneficial to remove the codes even when one has to add a new symbol table, because codes are typically longer than symbols so that the latter often fit into a smaller type, saving space. Furthermore, given that the codes here are by definition ordered from left to right, it is unnecessary to sort them again; for the same reason, one does not have to traverse the input twice. This function proved to be faster than ff_init_vlc_sparse() whenever it has been benchmarked. This function is usable for static tables (they can simply be permuted once) as well as in scenarios where the tables are naturally ordered from left to right in the tree; the latter e.g. happens with Smacker, Theora and several other formats. In order to make it also usable for (static) tables with incomplete trees, negative lengths are used to indicate that there is an open end of a certain length. Finally, ff_init_vlc_from_lengths() has one downside compared to ff_init_vlc_sparse(): The latter uses tables that can be reused by encoders. Of course, one could calculate the needed table at runtime if one so wishes, but it is nevertheless an obstacle. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-10-25 00:54:21 +02:00
/**
* Build VLC decoding tables suitable for use with get_vlc2()
*
* This function takes lengths and symbols and calculates the codes from them.
* For this the input lengths and symbols have to be sorted according to "left
* nodes in the corresponding tree first".
*
* @param[in,out] vlc The VLC to be initialized; table and table_allocated
* must have been set when initializing a static VLC,
* otherwise this will be treated as uninitialized.
* @param[in] nb_bits The number of bits to use for the VLC table;
* higher values take up more memory and cache, but
* allow to read codes with fewer reads.
* @param[in] nb_codes The number of provided length and (if supplied) symbol
* entries.
* @param[in] lens The lengths of the codes. Entries > 0 correspond to
* valid codes; entries == 0 will be skipped and entries
* with len < 0 indicate that the tree is incomplete and
* has an open end of length -len at this position.
* @param[in] lens_wrap Stride (in bytes) of the lengths.
* @param[in] symbols The symbols, i.e. what is returned from get_vlc2()
* when the corresponding code is encountered.
* May be NULL, then 0, 1, 2, 3, 4,... will be used.
* @param[in] symbols_wrap Stride (in bytes) of the symbols.
* @param[in] symbols_size Size of the symbols. 1 and 2 are supported.
* @param[in] offset An offset to apply to all the valid symbols.
* @param[in] flags A combination of the INIT_VLC_* flags; notice that
* INIT_VLC_INPUT_LE is pointless and ignored.
*/
int ff_init_vlc_from_lengths(VLC *vlc, int nb_bits, int nb_codes,
const int8_t *lens, int lens_wrap,
const void *symbols, int symbols_wrap, int symbols_size,
int offset, int flags, void *logctx);
void ff_free_vlc(VLC *vlc);
/* If INIT_VLC_INPUT_LE is set, the LSB bit of the codes used to
* initialize the VLC table is the first bit to be read. */
#define INIT_VLC_INPUT_LE 2
/* If set the VLC is intended for a little endian bitstream reader. */
#define INIT_VLC_OUTPUT_LE 8
#define INIT_VLC_LE (INIT_VLC_INPUT_LE | INIT_VLC_OUTPUT_LE)
#define INIT_VLC_USE_NEW_STATIC 4
#define INIT_VLC_STATIC_OVERLONG (1 | INIT_VLC_USE_NEW_STATIC)
#define INIT_CUSTOM_VLC_SPARSE_STATIC(vlc, bits, a, b, c, d, e, f, g, \
h, i, j, flags, static_size) \
do { \
static VLC_TYPE table[static_size][2]; \
(vlc)->table = table; \
(vlc)->table_allocated = static_size; \
ff_init_vlc_sparse(vlc, bits, a, b, c, d, e, f, g, h, i, j, \
flags | INIT_VLC_USE_NEW_STATIC); \
} while (0)
#define INIT_VLC_SPARSE_STATIC(vlc, bits, a, b, c, d, e, f, g, h, i, j, static_size) \
INIT_CUSTOM_VLC_SPARSE_STATIC(vlc, bits, a, b, c, d, e, f, g, \
h, i, j, 0, static_size)
#define INIT_LE_VLC_SPARSE_STATIC(vlc, bits, a, b, c, d, e, f, g, h, i, j, static_size) \
INIT_CUSTOM_VLC_SPARSE_STATIC(vlc, bits, a, b, c, d, e, f, g, \
h, i, j, INIT_VLC_LE, static_size)
#define INIT_CUSTOM_VLC_STATIC(vlc, bits, a, b, c, d, e, f, g, flags, static_size) \
INIT_CUSTOM_VLC_SPARSE_STATIC(vlc, bits, a, b, c, d, e, f, g, \
NULL, 0, 0, flags, static_size)
#define INIT_VLC_STATIC(vlc, bits, a, b, c, d, e, f, g, static_size) \
INIT_VLC_SPARSE_STATIC(vlc, bits, a, b, c, d, e, f, g, NULL, 0, 0, static_size)
#define INIT_LE_VLC_STATIC(vlc, bits, a, b, c, d, e, f, g, static_size) \
INIT_LE_VLC_SPARSE_STATIC(vlc, bits, a, b, c, d, e, f, g, NULL, 0, 0, static_size)
avcodec/bitstream: Add second function to create VLCs When using ff_init_vlc_sparse() to create a VLC, three input tables are used: A table for lengths, one for codes and one for symbols; the latter one can be omitted, then a default one will be used. These input tables will be traversed twice, once to get the long codes (which will be put into subtables) and once for the small codes. The long codes are then sorted so that entries that should be in the same subtable are contiguous. This commit adds an alternative to ff_init_vlc_sparse(): ff_init_vlc_from_lengths(). It is based upon the observation that if lengths, codes and symbols tables are permuted (in the same way) so that the codes are ordered from left to right in the corresponding tree and if said tree is complete (i.e. every non-leaf node has two children), the codes can be easily computed from the lengths and are therefore redundant. This means that if one initializes such a VLC with explicitly coded lengths, codes and symbols, the codes can be avoided; and even if one has no explicitly coded symbols, it might still be beneficial to remove the codes even when one has to add a new symbol table, because codes are typically longer than symbols so that the latter often fit into a smaller type, saving space. Furthermore, given that the codes here are by definition ordered from left to right, it is unnecessary to sort them again; for the same reason, one does not have to traverse the input twice. This function proved to be faster than ff_init_vlc_sparse() whenever it has been benchmarked. This function is usable for static tables (they can simply be permuted once) as well as in scenarios where the tables are naturally ordered from left to right in the tree; the latter e.g. happens with Smacker, Theora and several other formats. In order to make it also usable for (static) tables with incomplete trees, negative lengths are used to indicate that there is an open end of a certain length. Finally, ff_init_vlc_from_lengths() has one downside compared to ff_init_vlc_sparse(): The latter uses tables that can be reused by encoders. Of course, one could calculate the needed table at runtime if one so wishes, but it is nevertheless an obstacle. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-10-25 00:54:21 +02:00
#define INIT_VLC_STATIC_FROM_LENGTHS(vlc, bits, nb_codes, lens, len_wrap, \
symbols, symbols_wrap, symbols_size, \
offset, flags, static_size) \
do { \
static VLC_TYPE table[static_size][2]; \
(vlc)->table = table; \
(vlc)->table_allocated = static_size; \
ff_init_vlc_from_lengths(vlc, bits, nb_codes, lens, len_wrap, \
symbols, symbols_wrap, symbols_size, \
offset, flags | INIT_VLC_USE_NEW_STATIC, \
NULL); \
} while (0)
#endif /* AVCODEC_VLC_H */