1
0
mirror of https://github.com/FFmpeg/FFmpeg.git synced 2024-11-21 10:55:51 +02:00
FFmpeg/libavcodec/vc2enc.c

1286 lines
42 KiB
C
Raw Normal View History

avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
/*
* Copyright (C) 2016 Open Broadcast Systems Ltd.
* Author 2016 Rostislav Pehlivanov <atomnuker@gmail.com>
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "libavutil/pixdesc.h"
#include "libavutil/opt.h"
#include "dirac.h"
#include "put_bits.h"
#include "internal.h"
#include "version.h"
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
#include "vc2enc_dwt.h"
#include "diractab.h"
/* Quantizations above this usually zero coefficients and lower the quality */
#define MAX_QUANT_INDEX FF_ARRAY_ELEMS(ff_dirac_qscale_tab)
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
/* Total range is -COEF_LUT_TAB to +COEFF_LUT_TAB, but total tab size is half
* (COEF_LUT_TAB*MAX_QUANT_INDEX) since the sign is appended during encoding */
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
#define COEF_LUT_TAB 2048
/* The limited size resolution of each slice forces us to do this */
#define SSIZE_ROUND(b) (FFALIGN((b), s->size_scaler) + 4 + s->prefix_bytes)
/* Decides the cutoff point in # of slices to distribute the leftover bytes */
#define SLICE_REDIST_TOTAL 150
typedef struct VC2BaseVideoFormat {
enum AVPixelFormat pix_fmt;
AVRational time_base;
int width, height, interlaced, level;
const char *name;
} VC2BaseVideoFormat;
static const VC2BaseVideoFormat base_video_fmts[] = {
{ 0 }, /* Custom format, here just to make indexing equal to base_vf */
{ AV_PIX_FMT_YUV420P, { 1001, 15000 }, 176, 120, 0, 1, "QSIF525" },
{ AV_PIX_FMT_YUV420P, { 2, 25 }, 176, 144, 0, 1, "QCIF" },
{ AV_PIX_FMT_YUV420P, { 1001, 15000 }, 352, 240, 0, 1, "SIF525" },
{ AV_PIX_FMT_YUV420P, { 2, 25 }, 352, 288, 0, 1, "CIF" },
{ AV_PIX_FMT_YUV420P, { 1001, 15000 }, 704, 480, 0, 1, "4SIF525" },
{ AV_PIX_FMT_YUV420P, { 2, 25 }, 704, 576, 0, 1, "4CIF" },
{ AV_PIX_FMT_YUV422P10, { 1001, 30000 }, 720, 480, 1, 2, "SD480I-60" },
{ AV_PIX_FMT_YUV422P10, { 1, 25 }, 720, 576, 1, 2, "SD576I-50" },
{ AV_PIX_FMT_YUV422P10, { 1001, 60000 }, 1280, 720, 0, 3, "HD720P-60" },
{ AV_PIX_FMT_YUV422P10, { 1, 50 }, 1280, 720, 0, 3, "HD720P-50" },
{ AV_PIX_FMT_YUV422P10, { 1001, 30000 }, 1920, 1080, 1, 3, "HD1080I-60" },
{ AV_PIX_FMT_YUV422P10, { 1, 25 }, 1920, 1080, 1, 3, "HD1080I-50" },
{ AV_PIX_FMT_YUV422P10, { 1001, 60000 }, 1920, 1080, 1, 3, "HD1080P-60" },
{ AV_PIX_FMT_YUV422P10, { 1, 50 }, 1920, 1080, 1, 3, "HD1080P-50" },
{ AV_PIX_FMT_YUV444P12, { 1, 24 }, 2048, 1080, 0, 4, "DC2K" },
{ AV_PIX_FMT_YUV444P12, { 1, 24 }, 4096, 2160, 0, 5, "DC4K" },
{ AV_PIX_FMT_YUV422P10, { 1001, 60000 }, 3840, 2160, 0, 6, "UHDTV 4K-60" },
{ AV_PIX_FMT_YUV422P10, { 1, 50 }, 3840, 2160, 0, 6, "UHDTV 4K-50" },
{ AV_PIX_FMT_YUV422P10, { 1001, 60000 }, 7680, 4320, 0, 7, "UHDTV 8K-60" },
{ AV_PIX_FMT_YUV422P10, { 1, 50 }, 7680, 4320, 0, 7, "UHDTV 8K-50" },
{ AV_PIX_FMT_YUV422P10, { 1001, 24000 }, 1920, 1080, 0, 3, "HD1080P-24" },
{ AV_PIX_FMT_YUV422P10, { 1001, 30000 }, 720, 486, 1, 2, "SD Pro486" },
};
static const int base_video_fmts_len = FF_ARRAY_ELEMS(base_video_fmts);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
enum VC2_QM {
VC2_QM_DEF = 0,
VC2_QM_COL,
VC2_QM_FLAT,
VC2_QM_NB
};
typedef struct SubBand {
dwtcoef *buf;
ptrdiff_t stride;
int width;
int height;
} SubBand;
typedef struct Plane {
SubBand band[MAX_DWT_LEVELS][4];
dwtcoef *coef_buf;
int width;
int height;
int dwt_width;
int dwt_height;
ptrdiff_t coef_stride;
} Plane;
typedef struct SliceArgs {
PutBitContext pb;
int cache[MAX_QUANT_INDEX];
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
void *ctx;
int x;
int y;
int quant_idx;
int bits_ceil;
int bits_floor;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
int bytes;
} SliceArgs;
typedef struct TransformArgs {
void *ctx;
Plane *plane;
void *idata;
ptrdiff_t istride;
int field;
VC2TransformContext t;
} TransformArgs;
typedef struct VC2EncContext {
AVClass *av_class;
PutBitContext pb;
Plane plane[3];
AVCodecContext *avctx;
DiracVersionInfo ver;
SliceArgs *slice_args;
TransformArgs transform_args[3];
/* For conversion from unsigned pixel values to signed */
int diff_offset;
int bpp;
int bpp_idx;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
/* Picture number */
uint32_t picture_number;
/* Base video format */
int base_vf;
int level;
int profile;
/* Quantization matrix */
uint8_t quant[MAX_DWT_LEVELS][4];
int custom_quant_matrix;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
/* Coefficient LUT */
uint32_t *coef_lut_val;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
uint8_t *coef_lut_len;
int num_x; /* #slices horizontally */
int num_y; /* #slices vertically */
int prefix_bytes;
int size_scaler;
int chroma_x_shift;
int chroma_y_shift;
/* Rate control stuff */
int slice_max_bytes;
int slice_min_bytes;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
int q_ceil;
int q_avg;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
/* Options */
double tolerance;
int wavelet_idx;
int wavelet_depth;
int strict_compliance;
int slice_height;
int slice_width;
int interlaced;
enum VC2_QM quant_matrix;
/* Parse code state */
uint32_t next_parse_offset;
enum DiracParseCodes last_parse_code;
} VC2EncContext;
static av_always_inline void put_vc2_ue_uint(PutBitContext *pb, uint32_t val)
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
{
int i;
int pbits = 0, bits = 0, topbit = 1, maxval = 1;
if (!val++) {
put_bits(pb, 1, 1);
return;
}
while (val > maxval) {
topbit <<= 1;
maxval <<= 1;
maxval |= 1;
}
bits = ff_log2(topbit);
for (i = 0; i < bits; i++) {
topbit >>= 1;
pbits <<= 2;
if (val & topbit)
pbits |= 0x1;
}
put_bits(pb, bits*2 + 1, (pbits << 1) | 1);
}
static av_always_inline int count_vc2_ue_uint(uint32_t val)
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
{
int topbit = 1, maxval = 1;
if (!val++)
return 1;
while (val > maxval) {
topbit <<= 1;
maxval <<= 1;
maxval |= 1;
}
return ff_log2(topbit)*2 + 1;
}
static av_always_inline void get_vc2_ue_uint(int val, uint8_t *nbits,
uint32_t *eval)
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
{
int i;
int pbits = 0, bits = 0, topbit = 1, maxval = 1;
if (!val++) {
*nbits = 1;
*eval = 1;
return;
}
while (val > maxval) {
topbit <<= 1;
maxval <<= 1;
maxval |= 1;
}
bits = ff_log2(topbit);
for (i = 0; i < bits; i++) {
topbit >>= 1;
pbits <<= 2;
if (val & topbit)
pbits |= 0x1;
}
*nbits = bits*2 + 1;
*eval = (pbits << 1) | 1;
}
/* VC-2 10.4 - parse_info() */
static void encode_parse_info(VC2EncContext *s, enum DiracParseCodes pcode)
{
uint32_t cur_pos, dist;
avpriv_align_put_bits(&s->pb);
cur_pos = put_bits_count(&s->pb) >> 3;
/* Magic string */
avpriv_put_string(&s->pb, "BBCD", 0);
/* Parse code */
put_bits(&s->pb, 8, pcode);
/* Next parse offset */
dist = cur_pos - s->next_parse_offset;
AV_WB32(s->pb.buf + s->next_parse_offset + 5, dist);
s->next_parse_offset = cur_pos;
put_bits32(&s->pb, pcode == DIRAC_PCODE_END_SEQ ? 13 : 0);
/* Last parse offset */
put_bits32(&s->pb, s->last_parse_code == DIRAC_PCODE_END_SEQ ? 13 : dist);
s->last_parse_code = pcode;
}
/* VC-2 11.1 - parse_parameters()
* The level dictates what the decoder should expect in terms of resolution
* and allows it to quickly reject whatever it can't support. Remember,
* this codec kinda targets cheapo FPGAs without much memory. Unfortunately
* it also limits us greatly in our choice of formats, hence the flag to disable
* strict_compliance */
static void encode_parse_params(VC2EncContext *s)
{
put_vc2_ue_uint(&s->pb, s->ver.major); /* VC-2 demands this to be 2 */
put_vc2_ue_uint(&s->pb, s->ver.minor); /* ^^ and this to be 0 */
put_vc2_ue_uint(&s->pb, s->profile); /* 3 to signal HQ profile */
put_vc2_ue_uint(&s->pb, s->level); /* 3 - 1080/720, 6 - 4K */
}
/* VC-2 11.3 - frame_size() */
static void encode_frame_size(VC2EncContext *s)
{
put_bits(&s->pb, 1, !s->strict_compliance);
if (!s->strict_compliance) {
AVCodecContext *avctx = s->avctx;
put_vc2_ue_uint(&s->pb, avctx->width);
put_vc2_ue_uint(&s->pb, avctx->height);
}
}
/* VC-2 11.3.3 - color_diff_sampling_format() */
static void encode_sample_fmt(VC2EncContext *s)
{
put_bits(&s->pb, 1, !s->strict_compliance);
if (!s->strict_compliance) {
int idx;
if (s->chroma_x_shift == 1 && s->chroma_y_shift == 0)
idx = 1; /* 422 */
else if (s->chroma_x_shift == 1 && s->chroma_y_shift == 1)
idx = 2; /* 420 */
else
idx = 0; /* 444 */
put_vc2_ue_uint(&s->pb, idx);
}
}
/* VC-2 11.3.4 - scan_format() */
static void encode_scan_format(VC2EncContext *s)
{
put_bits(&s->pb, 1, !s->strict_compliance);
if (!s->strict_compliance)
put_vc2_ue_uint(&s->pb, s->interlaced);
}
/* VC-2 11.3.5 - frame_rate() */
static void encode_frame_rate(VC2EncContext *s)
{
put_bits(&s->pb, 1, !s->strict_compliance);
if (!s->strict_compliance) {
AVCodecContext *avctx = s->avctx;
put_vc2_ue_uint(&s->pb, 0);
put_vc2_ue_uint(&s->pb, avctx->time_base.den);
put_vc2_ue_uint(&s->pb, avctx->time_base.num);
}
}
/* VC-2 11.3.6 - aspect_ratio() */
static void encode_aspect_ratio(VC2EncContext *s)
{
put_bits(&s->pb, 1, !s->strict_compliance);
if (!s->strict_compliance) {
AVCodecContext *avctx = s->avctx;
put_vc2_ue_uint(&s->pb, 0);
put_vc2_ue_uint(&s->pb, avctx->sample_aspect_ratio.num);
put_vc2_ue_uint(&s->pb, avctx->sample_aspect_ratio.den);
}
}
/* VC-2 11.3.7 - clean_area() */
static void encode_clean_area(VC2EncContext *s)
{
put_bits(&s->pb, 1, 0);
}
/* VC-2 11.3.8 - signal_range() */
static void encode_signal_range(VC2EncContext *s)
{
put_bits(&s->pb, 1, !s->strict_compliance);
if (!s->strict_compliance)
put_vc2_ue_uint(&s->pb, s->bpp_idx);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
}
/* VC-2 11.3.9 - color_spec() */
static void encode_color_spec(VC2EncContext *s)
{
AVCodecContext *avctx = s->avctx;
put_bits(&s->pb, 1, !s->strict_compliance);
if (!s->strict_compliance) {
int val;
put_vc2_ue_uint(&s->pb, 0);
/* primaries */
put_bits(&s->pb, 1, 1);
if (avctx->color_primaries == AVCOL_PRI_BT470BG)
val = 2;
else if (avctx->color_primaries == AVCOL_PRI_SMPTE170M)
val = 1;
else if (avctx->color_primaries == AVCOL_PRI_SMPTE240M)
val = 1;
else
val = 0;
put_vc2_ue_uint(&s->pb, val);
/* color matrix */
put_bits(&s->pb, 1, 1);
if (avctx->colorspace == AVCOL_SPC_RGB)
val = 3;
else if (avctx->colorspace == AVCOL_SPC_YCOCG)
val = 2;
else if (avctx->colorspace == AVCOL_SPC_BT470BG)
val = 1;
else
val = 0;
put_vc2_ue_uint(&s->pb, val);
/* transfer function */
put_bits(&s->pb, 1, 1);
if (avctx->color_trc == AVCOL_TRC_LINEAR)
val = 2;
else if (avctx->color_trc == AVCOL_TRC_BT1361_ECG)
val = 1;
else
val = 0;
put_vc2_ue_uint(&s->pb, val);
}
}
/* VC-2 11.3 - source_parameters() */
static void encode_source_params(VC2EncContext *s)
{
encode_frame_size(s);
encode_sample_fmt(s);
encode_scan_format(s);
encode_frame_rate(s);
encode_aspect_ratio(s);
encode_clean_area(s);
encode_signal_range(s);
encode_color_spec(s);
}
/* VC-2 11 - sequence_header() */
static void encode_seq_header(VC2EncContext *s)
{
avpriv_align_put_bits(&s->pb);
encode_parse_params(s);
put_vc2_ue_uint(&s->pb, s->base_vf);
encode_source_params(s);
put_vc2_ue_uint(&s->pb, s->interlaced); /* Frames or fields coding */
}
/* VC-2 12.1 - picture_header() */
static void encode_picture_header(VC2EncContext *s)
{
avpriv_align_put_bits(&s->pb);
put_bits32(&s->pb, s->picture_number++);
}
/* VC-2 12.3.4.1 - slice_parameters() */
static void encode_slice_params(VC2EncContext *s)
{
put_vc2_ue_uint(&s->pb, s->num_x);
put_vc2_ue_uint(&s->pb, s->num_y);
put_vc2_ue_uint(&s->pb, s->prefix_bytes);
put_vc2_ue_uint(&s->pb, s->size_scaler);
}
/* 1st idx = LL, second - vertical, third - horizontal, fourth - total */
const uint8_t vc2_qm_col_tab[][4] = {
{20, 9, 15, 4},
{ 0, 6, 6, 4},
{ 0, 3, 3, 5},
{ 0, 3, 5, 1},
{ 0, 11, 10, 11}
};
const uint8_t vc2_qm_flat_tab[][4] = {
{ 0, 0, 0, 0},
{ 0, 0, 0, 0},
{ 0, 0, 0, 0},
{ 0, 0, 0, 0},
{ 0, 0, 0, 0}
};
static void init_quant_matrix(VC2EncContext *s)
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
{
int level, orientation;
if (s->wavelet_depth <= 4 && s->quant_matrix == VC2_QM_DEF) {
s->custom_quant_matrix = 0;
for (level = 0; level < s->wavelet_depth; level++) {
s->quant[level][0] = ff_dirac_default_qmat[s->wavelet_idx][level][0];
s->quant[level][1] = ff_dirac_default_qmat[s->wavelet_idx][level][1];
s->quant[level][2] = ff_dirac_default_qmat[s->wavelet_idx][level][2];
s->quant[level][3] = ff_dirac_default_qmat[s->wavelet_idx][level][3];
}
return;
}
s->custom_quant_matrix = 1;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
if (s->quant_matrix == VC2_QM_DEF) {
for (level = 0; level < s->wavelet_depth; level++) {
for (orientation = 0; orientation < 4; orientation++) {
if (level <= 3)
s->quant[level][orientation] = ff_dirac_default_qmat[s->wavelet_idx][level][orientation];
else
s->quant[level][orientation] = vc2_qm_col_tab[level][orientation];
}
}
} else if (s->quant_matrix == VC2_QM_COL) {
for (level = 0; level < s->wavelet_depth; level++) {
for (orientation = 0; orientation < 4; orientation++) {
s->quant[level][orientation] = vc2_qm_col_tab[level][orientation];
}
}
} else {
for (level = 0; level < s->wavelet_depth; level++) {
for (orientation = 0; orientation < 4; orientation++) {
s->quant[level][orientation] = vc2_qm_flat_tab[level][orientation];
}
}
}
}
/* VC-2 12.3.4.2 - quant_matrix() */
static void encode_quant_matrix(VC2EncContext *s)
{
int level;
put_bits(&s->pb, 1, s->custom_quant_matrix);
if (s->custom_quant_matrix) {
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
put_vc2_ue_uint(&s->pb, s->quant[0][0]);
for (level = 0; level < s->wavelet_depth; level++) {
put_vc2_ue_uint(&s->pb, s->quant[level][1]);
put_vc2_ue_uint(&s->pb, s->quant[level][2]);
put_vc2_ue_uint(&s->pb, s->quant[level][3]);
}
}
}
/* VC-2 12.3 - transform_parameters() */
static void encode_transform_params(VC2EncContext *s)
{
put_vc2_ue_uint(&s->pb, s->wavelet_idx);
put_vc2_ue_uint(&s->pb, s->wavelet_depth);
encode_slice_params(s);
encode_quant_matrix(s);
}
/* VC-2 12.2 - wavelet_transform() */
static void encode_wavelet_transform(VC2EncContext *s)
{
encode_transform_params(s);
avpriv_align_put_bits(&s->pb);
}
/* VC-2 12 - picture_parse() */
static void encode_picture_start(VC2EncContext *s)
{
avpriv_align_put_bits(&s->pb);
encode_picture_header(s);
avpriv_align_put_bits(&s->pb);
encode_wavelet_transform(s);
}
#define QUANT(c, qf) (((c) << 2)/(qf))
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
/* VC-2 13.5.5.2 - slice_band() */
static void encode_subband(VC2EncContext *s, PutBitContext *pb, int sx, int sy,
SubBand *b, int quant)
{
int x, y;
const int left = b->width * (sx+0) / s->num_x;
const int right = b->width * (sx+1) / s->num_x;
const int top = b->height * (sy+0) / s->num_y;
const int bottom = b->height * (sy+1) / s->num_y;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
const int qfactor = ff_dirac_qscale_tab[quant];
const uint8_t *len_lut = &s->coef_lut_len[quant*COEF_LUT_TAB];
const uint32_t *val_lut = &s->coef_lut_val[quant*COEF_LUT_TAB];
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
dwtcoef *coeff = b->buf + top * b->stride;
for (y = top; y < bottom; y++) {
for (x = left; x < right; x++) {
const int neg = coeff[x] < 0;
uint32_t c_abs = FFABS(coeff[x]);
if (c_abs < COEF_LUT_TAB) {
const uint8_t len = len_lut[c_abs];
if (len == 1)
put_bits(pb, 1, 1);
else
put_bits(pb, len + 1, (val_lut[c_abs] << 1) | neg);
} else {
c_abs = QUANT(c_abs, qfactor);
put_vc2_ue_uint(pb, c_abs);
if (c_abs)
put_bits(pb, 1, neg);
}
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
}
coeff += b->stride;
}
}
static int count_hq_slice(SliceArgs *slice, int quant_idx)
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
{
int x, y;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
uint8_t quants[MAX_DWT_LEVELS][4];
int bits = 0, p, level, orientation;
VC2EncContext *s = slice->ctx;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
if (slice->cache[quant_idx])
return slice->cache[quant_idx];
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
bits += 8*s->prefix_bytes;
bits += 8; /* quant_idx */
for (level = 0; level < s->wavelet_depth; level++)
for (orientation = !!level; orientation < 4; orientation++)
quants[level][orientation] = FFMAX(quant_idx - s->quant[level][orientation], 0);
for (p = 0; p < 3; p++) {
int bytes_start, bytes_len, pad_s, pad_c;
bytes_start = bits >> 3;
bits += 8;
for (level = 0; level < s->wavelet_depth; level++) {
for (orientation = !!level; orientation < 4; orientation++) {
SubBand *b = &s->plane[p].band[level][orientation];
const int q_idx = quants[level][orientation];
const uint8_t *len_lut = &s->coef_lut_len[q_idx*COEF_LUT_TAB];
const int qfactor = ff_dirac_qscale_tab[q_idx];
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
const int left = b->width * slice->x / s->num_x;
const int right = b->width *(slice->x+1) / s->num_x;
const int top = b->height * slice->y / s->num_y;
const int bottom = b->height *(slice->y+1) / s->num_y;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
dwtcoef *buf = b->buf + top * b->stride;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
for (y = top; y < bottom; y++) {
for (x = left; x < right; x++) {
uint32_t c_abs = FFABS(buf[x]);
if (c_abs < COEF_LUT_TAB) {
const int len = len_lut[c_abs];
bits += len + (len != 1);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
} else {
c_abs = QUANT(c_abs, qfactor);
bits += count_vc2_ue_uint(c_abs);
bits += !!c_abs;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
}
}
buf += b->stride;
}
}
}
bits += FFALIGN(bits, 8) - bits;
bytes_len = (bits >> 3) - bytes_start - 1;
pad_s = FFALIGN(bytes_len, s->size_scaler)/s->size_scaler;
pad_c = (pad_s*s->size_scaler) - bytes_len;
bits += pad_c*8;
}
slice->cache[quant_idx] = bits;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
return bits;
}
/* Approaches the best possible quantizer asymptotically, its kinda exaustive
* but we have a LUT to get the coefficient size in bits. Guaranteed to never
* overshoot, which is apparently very important when streaming */
static int rate_control(AVCodecContext *avctx, void *arg)
{
SliceArgs *slice_dat = arg;
VC2EncContext *s = slice_dat->ctx;
const int top = slice_dat->bits_ceil;
const int bottom = slice_dat->bits_floor;
int quant_buf[2] = {-1, -1};
int quant = slice_dat->quant_idx, step = 1;
int bits_last, bits = count_hq_slice(slice_dat, quant);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
while ((bits > top) || (bits < bottom)) {
const int signed_step = bits > top ? +step : -step;
quant = av_clip(quant + signed_step, 0, s->q_ceil-1);
bits = count_hq_slice(slice_dat, quant);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
if (quant_buf[1] == quant) {
quant = FFMAX(quant_buf[0], quant);
bits = quant == quant_buf[0] ? bits_last : bits;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
break;
}
step = av_clip(step/2, 1, (s->q_ceil-1)/2);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
quant_buf[1] = quant_buf[0];
quant_buf[0] = quant;
bits_last = bits;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
}
slice_dat->quant_idx = av_clip(quant, 0, s->q_ceil-1);
slice_dat->bytes = SSIZE_ROUND(bits >> 3);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
return 0;
}
static int calc_slice_sizes(VC2EncContext *s)
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
{
int i, j, slice_x, slice_y, bytes_left = 0;
int bytes_top[SLICE_REDIST_TOTAL] = {0};
int64_t total_bytes_needed = 0;
int slice_redist_range = FFMIN(SLICE_REDIST_TOTAL, s->num_x*s->num_y);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
SliceArgs *enc_args = s->slice_args;
SliceArgs *top_loc[SLICE_REDIST_TOTAL] = {NULL};
init_quant_matrix(s);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
for (slice_y = 0; slice_y < s->num_y; slice_y++) {
for (slice_x = 0; slice_x < s->num_x; slice_x++) {
SliceArgs *args = &enc_args[s->num_x*slice_y + slice_x];
args->ctx = s;
args->x = slice_x;
args->y = slice_y;
args->bits_ceil = s->slice_max_bytes << 3;
args->bits_floor = s->slice_min_bytes << 3;
memset(args->cache, 0, s->q_ceil*sizeof(*args->cache));
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
}
}
/* First pass - determine baseline slice sizes w.r.t. max_slice_size */
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
s->avctx->execute(s->avctx, rate_control, enc_args, NULL, s->num_x*s->num_y,
sizeof(SliceArgs));
for (i = 0; i < s->num_x*s->num_y; i++) {
SliceArgs *args = &enc_args[i];
bytes_left += s->slice_max_bytes - args->bytes;
for (j = 0; j < slice_redist_range; j++) {
if (args->bytes > bytes_top[j]) {
bytes_top[j] = args->bytes;
top_loc[j] = args;
break;
}
}
}
/* Second pass - distribute leftover bytes */
while (1) {
int distributed = 0;
for (i = 0; i < slice_redist_range; i++) {
SliceArgs *args;
int bits, bytes, diff, prev_bytes, new_idx;
if (bytes_left <= 0)
break;
if (!top_loc[i] || !top_loc[i]->quant_idx)
break;
args = top_loc[i];
prev_bytes = args->bytes;
new_idx = FFMAX(args->quant_idx - 1, 0);
bits = count_hq_slice(args, new_idx);
bytes = SSIZE_ROUND(bits >> 3);
diff = bytes - prev_bytes;
if ((bytes_left - diff) > 0) {
args->quant_idx = new_idx;
args->bytes = bytes;
bytes_left -= diff;
distributed++;
}
}
if (!distributed)
break;
}
for (i = 0; i < s->num_x*s->num_y; i++) {
SliceArgs *args = &enc_args[i];
total_bytes_needed += args->bytes;
s->q_avg = (s->q_avg + args->quant_idx)/2;
}
return total_bytes_needed;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
}
/* VC-2 13.5.3 - hq_slice */
static int encode_hq_slice(AVCodecContext *avctx, void *arg)
{
SliceArgs *slice_dat = arg;
VC2EncContext *s = slice_dat->ctx;
PutBitContext *pb = &slice_dat->pb;
const int slice_x = slice_dat->x;
const int slice_y = slice_dat->y;
const int quant_idx = slice_dat->quant_idx;
const int slice_bytes_max = slice_dat->bytes;
uint8_t quants[MAX_DWT_LEVELS][4];
int p, level, orientation;
skip_put_bytes(pb, s->prefix_bytes);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
put_bits(pb, 8, quant_idx);
/* Slice quantization (slice_quantizers() in the specs) */
for (level = 0; level < s->wavelet_depth; level++)
for (orientation = !!level; orientation < 4; orientation++)
quants[level][orientation] = FFMAX(quant_idx - s->quant[level][orientation], 0);
/* Luma + 2 Chroma planes */
for (p = 0; p < 3; p++) {
int bytes_start, bytes_len, pad_s, pad_c;
bytes_start = put_bits_count(pb) >> 3;
put_bits(pb, 8, 0);
for (level = 0; level < s->wavelet_depth; level++) {
for (orientation = !!level; orientation < 4; orientation++) {
encode_subband(s, pb, slice_x, slice_y,
&s->plane[p].band[level][orientation],
quants[level][orientation]);
}
}
avpriv_align_put_bits(pb);
bytes_len = (put_bits_count(pb) >> 3) - bytes_start - 1;
if (p == 2) {
int len_diff = slice_bytes_max - (put_bits_count(pb) >> 3);
pad_s = FFALIGN((bytes_len + len_diff), s->size_scaler)/s->size_scaler;
pad_c = (pad_s*s->size_scaler) - bytes_len;
} else {
pad_s = FFALIGN(bytes_len, s->size_scaler)/s->size_scaler;
pad_c = (pad_s*s->size_scaler) - bytes_len;
}
pb->buf[bytes_start] = pad_s;
flush_put_bits(pb);
skip_put_bytes(pb, pad_c);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
}
return 0;
}
/* VC-2 13.5.1 - low_delay_transform_data() */
static int encode_slices(VC2EncContext *s)
{
uint8_t *buf;
int slice_x, slice_y, skip = 0;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
SliceArgs *enc_args = s->slice_args;
avpriv_align_put_bits(&s->pb);
flush_put_bits(&s->pb);
buf = put_bits_ptr(&s->pb);
for (slice_y = 0; slice_y < s->num_y; slice_y++) {
for (slice_x = 0; slice_x < s->num_x; slice_x++) {
SliceArgs *args = &enc_args[s->num_x*slice_y + slice_x];
init_put_bits(&args->pb, buf + skip, args->bytes+s->prefix_bytes);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
skip += args->bytes;
}
}
s->avctx->execute(s->avctx, encode_hq_slice, enc_args, NULL, s->num_x*s->num_y,
sizeof(SliceArgs));
skip_put_bytes(&s->pb, skip);
return 0;
}
/*
* Transform basics for a 3 level transform
* |---------------------------------------------------------------------|
* | LL-0 | HL-0 | | |
* |--------|-------| HL-1 | |
* | LH-0 | HH-0 | | |
* |----------------|-----------------| HL-2 |
* | | | |
* | LH-1 | HH-1 | |
* | | | |
* |----------------------------------|----------------------------------|
* | | |
* | | |
* | | |
* | LH-2 | HH-2 |
* | | |
* | | |
* | | |
* |---------------------------------------------------------------------|
*
* DWT transforms are generally applied by splitting the image in two vertically
* and applying a low pass transform on the left part and a corresponding high
* pass transform on the right hand side. This is known as the horizontal filter
* stage.
* After that, the same operation is performed except the image is divided
* horizontally, with the high pass on the lower and the low pass on the higher
* side.
* Therefore, you're left with 4 subdivisions - known as low-low, low-high,
* high-low and high-high. They're referred to as orientations in the decoder
* and encoder.
*
* The LL (low-low) area contains the original image downsampled by the amount
* of levels. The rest of the areas can be thought as the details needed
* to restore the image perfectly to its original size.
*/
static int dwt_plane(AVCodecContext *avctx, void *arg)
{
TransformArgs *transform_dat = arg;
VC2EncContext *s = transform_dat->ctx;
const void *frame_data = transform_dat->idata;
const ptrdiff_t linesize = transform_dat->istride;
const int field = transform_dat->field;
const Plane *p = transform_dat->plane;
VC2TransformContext *t = &transform_dat->t;
dwtcoef *buf = p->coef_buf;
const int idx = s->wavelet_idx;
const int skip = 1 + s->interlaced;
int x, y, level, offset;
ptrdiff_t pix_stride = linesize >> (s->bpp - 1);
if (field == 1) {
offset = 0;
pix_stride <<= 1;
} else if (field == 2) {
offset = pix_stride;
pix_stride <<= 1;
} else {
offset = 0;
}
if (s->bpp == 1) {
const uint8_t *pix = (const uint8_t *)frame_data + offset;
for (y = 0; y < p->height*skip; y+=skip) {
for (x = 0; x < p->width; x++) {
buf[x] = pix[x] - s->diff_offset;
}
buf += p->coef_stride;
pix += pix_stride;
}
} else {
const uint16_t *pix = (const uint16_t *)frame_data + offset;
for (y = 0; y < p->height*skip; y+=skip) {
for (x = 0; x < p->width; x++) {
buf[x] = pix[x] - s->diff_offset;
}
buf += p->coef_stride;
pix += pix_stride;
}
}
memset(buf, 0, p->coef_stride * (p->dwt_height - p->height) * sizeof(dwtcoef));
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
for (level = s->wavelet_depth-1; level >= 0; level--) {
const SubBand *b = &p->band[level][0];
t->vc2_subband_dwt[idx](t, p->coef_buf, p->coef_stride,
b->width, b->height);
}
return 0;
}
static int encode_frame(VC2EncContext *s, AVPacket *avpkt, const AVFrame *frame,
const char *aux_data, const int header_size, int field)
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
{
int i, ret;
int64_t max_frame_bytes;
/* Threaded DWT transform */
for (i = 0; i < 3; i++) {
s->transform_args[i].ctx = s;
s->transform_args[i].field = field;
s->transform_args[i].plane = &s->plane[i];
s->transform_args[i].idata = frame->data[i];
s->transform_args[i].istride = frame->linesize[i];
}
s->avctx->execute(s->avctx, dwt_plane, s->transform_args, NULL, 3,
sizeof(TransformArgs));
/* Calculate per-slice quantizers and sizes */
max_frame_bytes = header_size + calc_slice_sizes(s);
if (field < 2) {
ret = ff_alloc_packet2(s->avctx, avpkt,
max_frame_bytes << s->interlaced,
max_frame_bytes << s->interlaced);
if (ret) {
av_log(s->avctx, AV_LOG_ERROR, "Error getting output packet.\n");
return ret;
}
init_put_bits(&s->pb, avpkt->data, avpkt->size);
}
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
/* Sequence header */
encode_parse_info(s, DIRAC_PCODE_SEQ_HEADER);
encode_seq_header(s);
/* Encoder version */
if (aux_data) {
encode_parse_info(s, DIRAC_PCODE_AUX);
avpriv_put_string(&s->pb, aux_data, 1);
}
/* Picture header */
encode_parse_info(s, DIRAC_PCODE_PICTURE_HQ);
encode_picture_start(s);
/* Encode slices */
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
encode_slices(s);
/* End sequence */
encode_parse_info(s, DIRAC_PCODE_END_SEQ);
return 0;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
}
static av_cold int vc2_encode_frame(AVCodecContext *avctx, AVPacket *avpkt,
const AVFrame *frame, int *got_packet)
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
{
int ret = 0;
int sig_size = 256;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
VC2EncContext *s = avctx->priv_data;
const char aux_data[] = LIBAVCODEC_IDENT;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
const int aux_data_size = sizeof(aux_data);
const int header_size = 100 + aux_data_size;
int64_t max_frame_bytes, r_bitrate = avctx->bit_rate >> (s->interlaced);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
s->avctx = avctx;
s->size_scaler = 2;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
s->prefix_bytes = 0;
s->last_parse_code = 0;
s->next_parse_offset = 0;
/* Rate control */
max_frame_bytes = (av_rescale(r_bitrate, s->avctx->time_base.num,
s->avctx->time_base.den) >> 3) - header_size;
s->slice_max_bytes = av_rescale(max_frame_bytes, 1, s->num_x*s->num_y);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
/* Find an appropriate size scaler */
while (sig_size > 255) {
int r_size = SSIZE_ROUND(s->slice_max_bytes);
sig_size = r_size/s->size_scaler; /* Signalled slize size */
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
s->size_scaler <<= 1;
}
s->slice_max_bytes = SSIZE_ROUND(s->slice_max_bytes);
s->slice_min_bytes = s->slice_max_bytes - s->slice_max_bytes*(s->tolerance/100.0f);
ret = encode_frame(s, avpkt, frame, aux_data, header_size, s->interlaced);
if (ret)
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
return ret;
if (s->interlaced) {
ret = encode_frame(s, avpkt, frame, aux_data, header_size, 2);
if (ret)
return ret;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
}
flush_put_bits(&s->pb);
avpkt->size = put_bits_count(&s->pb) >> 3;
*got_packet = 1;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
return 0;
}
static av_cold int vc2_encode_end(AVCodecContext *avctx)
{
int i;
VC2EncContext *s = avctx->priv_data;
av_log(avctx, AV_LOG_INFO, "Qavg: %i\n", s->q_avg);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
for (i = 0; i < 3; i++) {
ff_vc2enc_free_transforms(&s->transform_args[i].t);
av_freep(&s->plane[i].coef_buf);
}
av_freep(&s->slice_args);
av_freep(&s->coef_lut_len);
av_freep(&s->coef_lut_val);
return 0;
}
static av_cold int vc2_encode_init(AVCodecContext *avctx)
{
Plane *p;
SubBand *b;
int i, j, level, o, shift;
const AVPixFmtDescriptor *fmt = av_pix_fmt_desc_get(avctx->pix_fmt);
const int depth = fmt->comp[0].depth;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
VC2EncContext *s = avctx->priv_data;
s->picture_number = 0;
/* Total allowed quantization range */
s->q_ceil = MAX_QUANT_INDEX;
s->ver.major = 2;
s->ver.minor = 0;
s->profile = 3;
s->level = 3;
s->base_vf = -1;
s->strict_compliance = 1;
s->q_avg = 0;
s->slice_max_bytes = 0;
s->slice_min_bytes = 0;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
/* Mark unknown as progressive */
s->interlaced = !((avctx->field_order == AV_FIELD_UNKNOWN) ||
(avctx->field_order == AV_FIELD_PROGRESSIVE));
for (i = 0; i < base_video_fmts_len; i++) {
const VC2BaseVideoFormat *fmt = &base_video_fmts[i];
if (avctx->pix_fmt != fmt->pix_fmt)
continue;
if (avctx->time_base.num != fmt->time_base.num)
continue;
if (avctx->time_base.den != fmt->time_base.den)
continue;
if (avctx->width != fmt->width)
continue;
if (avctx->height != fmt->height)
continue;
if (s->interlaced != fmt->interlaced)
continue;
s->base_vf = i;
s->level = base_video_fmts[i].level;
break;
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
}
if (s->interlaced)
av_log(avctx, AV_LOG_WARNING, "Interlacing enabled!\n");
if ((s->slice_width & (s->slice_width - 1)) ||
(s->slice_height & (s->slice_height - 1))) {
av_log(avctx, AV_LOG_ERROR, "Slice size is not a power of two!\n");
return AVERROR_UNKNOWN;
}
if ((s->slice_width > avctx->width) ||
(s->slice_height > avctx->height)) {
av_log(avctx, AV_LOG_ERROR, "Slice size is bigger than the image!\n");
return AVERROR_UNKNOWN;
}
if (s->base_vf <= 0) {
if (avctx->strict_std_compliance <= FF_COMPLIANCE_UNOFFICIAL) {
s->strict_compliance = s->base_vf = 0;
av_log(avctx, AV_LOG_WARNING, "Disabling strict compliance\n");
} else {
av_log(avctx, AV_LOG_WARNING, "Given format does not strictly comply with "
"the specifications, please add a -strict -1 flag to use it\n");
return AVERROR_UNKNOWN;
}
} else {
av_log(avctx, AV_LOG_INFO, "Selected base video format = %i (%s)\n",
s->base_vf, base_video_fmts[s->base_vf].name);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
}
/* Chroma subsampling */
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
avcodec_get_chroma_sub_sample(avctx->pix_fmt, &s->chroma_x_shift, &s->chroma_y_shift);
/* Bit depth and color range index */
if (depth == 8 && avctx->color_range == AVCOL_RANGE_JPEG) {
s->bpp = 1;
s->bpp_idx = 1;
s->diff_offset = 128;
} else if (depth == 8 && (avctx->color_range == AVCOL_RANGE_MPEG ||
avctx->color_range == AVCOL_RANGE_UNSPECIFIED)) {
s->bpp = 1;
s->bpp_idx = 2;
s->diff_offset = 128;
} else if (depth == 10) {
s->bpp = 2;
s->bpp_idx = 3;
s->diff_offset = 512;
} else {
s->bpp = 2;
s->bpp_idx = 4;
s->diff_offset = 2048;
}
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
/* Planes initialization */
for (i = 0; i < 3; i++) {
int w, h;
p = &s->plane[i];
p->width = avctx->width >> (i ? s->chroma_x_shift : 0);
p->height = avctx->height >> (i ? s->chroma_y_shift : 0);
if (s->interlaced)
p->height >>= 1;
p->dwt_width = w = FFALIGN(p->width, (1 << s->wavelet_depth));
p->dwt_height = h = FFALIGN(p->height, (1 << s->wavelet_depth));
p->coef_stride = FFALIGN(p->dwt_width, 32);
p->coef_buf = av_malloc(p->coef_stride*p->dwt_height*sizeof(dwtcoef));
if (!p->coef_buf)
goto alloc_fail;
for (level = s->wavelet_depth-1; level >= 0; level--) {
w = w >> 1;
h = h >> 1;
for (o = 0; o < 4; o++) {
b = &p->band[level][o];
b->width = w;
b->height = h;
b->stride = p->coef_stride;
shift = (o > 1)*b->height*b->stride + (o & 1)*b->width;
b->buf = p->coef_buf + shift;
}
}
/* DWT init */
if (ff_vc2enc_init_transforms(&s->transform_args[i].t,
s->plane[i].coef_stride,
s->plane[i].dwt_height))
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
goto alloc_fail;
}
/* Slices */
s->num_x = s->plane[0].dwt_width/s->slice_width;
s->num_y = s->plane[0].dwt_height/s->slice_height;
s->slice_args = av_calloc(s->num_x*s->num_y, sizeof(SliceArgs));
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
if (!s->slice_args)
goto alloc_fail;
/* Lookup tables */
s->coef_lut_len = av_malloc(COEF_LUT_TAB*(s->q_ceil+1)*sizeof(*s->coef_lut_len));
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
if (!s->coef_lut_len)
goto alloc_fail;
s->coef_lut_val = av_malloc(COEF_LUT_TAB*(s->q_ceil+1)*sizeof(*s->coef_lut_val));
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
if (!s->coef_lut_val)
goto alloc_fail;
for (i = 0; i < s->q_ceil; i++) {
uint8_t *len_lut = &s->coef_lut_len[i*COEF_LUT_TAB];
uint32_t *val_lut = &s->coef_lut_val[i*COEF_LUT_TAB];
for (j = 0; j < COEF_LUT_TAB; j++) {
get_vc2_ue_uint(QUANT(j, ff_dirac_qscale_tab[i]),
&len_lut[j], &val_lut[j]);
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
}
}
return 0;
alloc_fail:
vc2_encode_end(avctx);
av_log(avctx, AV_LOG_ERROR, "Unable to allocate memory!\n");
return AVERROR(ENOMEM);
}
#define VC2ENC_FLAGS (AV_OPT_FLAG_ENCODING_PARAM | AV_OPT_FLAG_VIDEO_PARAM)
static const AVOption vc2enc_options[] = {
{"tolerance", "Max undershoot in percent", offsetof(VC2EncContext, tolerance), AV_OPT_TYPE_DOUBLE, {.dbl = 5.0f}, 0.0f, 45.0f, VC2ENC_FLAGS, "tolerance"},
{"slice_width", "Slice width", offsetof(VC2EncContext, slice_width), AV_OPT_TYPE_INT, {.i64 = 64}, 32, 1024, VC2ENC_FLAGS, "slice_width"},
{"slice_height", "Slice height", offsetof(VC2EncContext, slice_height), AV_OPT_TYPE_INT, {.i64 = 32}, 8, 1024, VC2ENC_FLAGS, "slice_height"},
{"wavelet_depth", "Transform depth", offsetof(VC2EncContext, wavelet_depth), AV_OPT_TYPE_INT, {.i64 = 4}, 1, 5, VC2ENC_FLAGS, "wavelet_depth"},
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
{"wavelet_type", "Transform type", offsetof(VC2EncContext, wavelet_idx), AV_OPT_TYPE_INT, {.i64 = VC2_TRANSFORM_9_7}, 0, VC2_TRANSFORMS_NB, VC2ENC_FLAGS, "wavelet_idx"},
{"9_7", "Deslauriers-Dubuc (9,7)", 0, AV_OPT_TYPE_CONST, {.i64 = VC2_TRANSFORM_9_7}, INT_MIN, INT_MAX, VC2ENC_FLAGS, "wavelet_idx"},
{"5_3", "LeGall (5,3)", 0, AV_OPT_TYPE_CONST, {.i64 = VC2_TRANSFORM_5_3}, INT_MIN, INT_MAX, VC2ENC_FLAGS, "wavelet_idx"},
{"haar", "Haar (with shift)", 0, AV_OPT_TYPE_CONST, {.i64 = VC2_TRANSFORM_HAAR_S}, INT_MIN, INT_MAX, VC2ENC_FLAGS, "wavelet_idx"},
{"haar_noshift", "Haar (without shift)", 0, AV_OPT_TYPE_CONST, {.i64 = VC2_TRANSFORM_HAAR}, INT_MIN, INT_MAX, VC2ENC_FLAGS, "wavelet_idx"},
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
{"qm", "Custom quantization matrix", offsetof(VC2EncContext, quant_matrix), AV_OPT_TYPE_INT, {.i64 = VC2_QM_DEF}, 0, VC2_QM_NB, VC2ENC_FLAGS, "quant_matrix"},
{"default", "Default from the specifications", 0, AV_OPT_TYPE_CONST, {.i64 = VC2_QM_DEF}, INT_MIN, INT_MAX, VC2ENC_FLAGS, "quant_matrix"},
{"color", "Prevents low bitrate discoloration", 0, AV_OPT_TYPE_CONST, {.i64 = VC2_QM_COL}, INT_MIN, INT_MAX, VC2ENC_FLAGS, "quant_matrix"},
{"flat", "Optimize for PSNR", 0, AV_OPT_TYPE_CONST, {.i64 = VC2_QM_FLAT}, INT_MIN, INT_MAX, VC2ENC_FLAGS, "quant_matrix"},
{NULL}
};
static const AVClass vc2enc_class = {
.class_name = "SMPTE VC-2 encoder",
.category = AV_CLASS_CATEGORY_ENCODER,
.option = vc2enc_options,
.item_name = av_default_item_name,
.version = LIBAVUTIL_VERSION_INT
};
static const AVCodecDefault vc2enc_defaults[] = {
{ "b", "600000000" },
{ NULL },
};
static const enum AVPixelFormat allowed_pix_fmts[] = {
AV_PIX_FMT_YUV420P, AV_PIX_FMT_YUV422P, AV_PIX_FMT_YUV444P,
AV_PIX_FMT_YUV420P10, AV_PIX_FMT_YUV422P10, AV_PIX_FMT_YUV444P10,
AV_PIX_FMT_YUV420P12, AV_PIX_FMT_YUV422P12, AV_PIX_FMT_YUV444P12,
AV_PIX_FMT_NONE
};
AVCodec ff_vc2_encoder = {
.name = "vc2",
.long_name = NULL_IF_CONFIG_SMALL("SMPTE VC-2"),
.type = AVMEDIA_TYPE_VIDEO,
.id = AV_CODEC_ID_DIRAC,
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
.priv_data_size = sizeof(VC2EncContext),
.init = vc2_encode_init,
.close = vc2_encode_end,
.capabilities = AV_CODEC_CAP_SLICE_THREADS,
.caps_internal = FF_CODEC_CAP_INIT_THREADSAFE,
.encode2 = vc2_encode_frame,
.priv_class = &vc2enc_class,
.defaults = vc2enc_defaults,
.pix_fmts = allowed_pix_fmts
avcodec: add a native SMPTE VC-2 HQ encoder This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ profile files. Dirac is a wavelet based codec created by the BBC a little more than 10 years ago. Since then, wavelets have mostly gone out of style as they did not provide adequate encoding gains at lower bitrates. Dirac was a fully featured video codec equipped with perceptual masking, support for most popular pixel formats, interlacing, overlapped-block motion compensation, and other features. It found new life after being stripped of various features and standardized as the VC-2 codec by the SMPTE with an extra profile, the HQ profile that this encoder supports, added. The HQ profile was based off of the Low-Delay profile previously existing in Dirac. The profile forbids DC prediction and arithmetic coding to focus on high performance and low delay at higher bitrates. The standard bitrates for this profile vary but generally 1:4 compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed 1080p50). The codec only supports I-frames, hence the high bitrates. The structure of this encoder is simple: do a DWT transform on the entire image, split it into multiple slices (specified by the user) and encode them in parallel. All of the slices are of the same size, making rate control and threading very trivial. Although only in C, this encoder is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge. A lookup table is used to encode most of the coefficients. No code was used from the GSoC encoder from 2007 except for the 2 transform functions in diracenc_transforms.c. All other code was written from scratch. This encoder outperforms any other encoders in quality, usability and in features. Other existing implementations do not support 4 level transforms or 64x64 blocks (slices), which greatly increase compression. As previously said, the codec is meant for broadcasting, hence support for non-broadcasting image widths, heights, bit depths, aspect ratios, etc. are limited by the "level". Although this codec supports a few chroma subsamplings (420, 422, 444), signalling those is generally outside the specifications of the level used (3) and the reference decoder will outright refuse to read any image with such a flag signalled (it only supports 1920x1080 yuv422p10). However, most implementations will happily read files with alternate dimensions, framerates and formats signalled. Therefore, in order to encode files other than 1080p50 yuv422p10le, you need to provide an "-strict -2" argument to the command line. The FFmpeg decoder will happily read any files made with non-standard parameters, dimensions and subsamplings, and so will other implementations. IMO this should be "-strict -1", but I'll leave that up for discussion. There are still plenty of stuff to implement, for instance 5 more wavelet transforms are still in the specs and supported by the decoder. The encoder can be lossless, given a high enough bitrate. Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
2016-02-10 18:50:00 +02:00
};