1
0
mirror of https://github.com/FFmpeg/FFmpeg.git synced 2024-12-28 20:53:54 +02:00
FFmpeg/libavcodec/h264_metadata_bsf.c

819 lines
27 KiB
C
Raw Normal View History

/*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "libavutil/avstring.h"
#include "libavutil/display.h"
#include "libavutil/common.h"
#include "libavutil/opt.h"
#include "bsf.h"
#include "bsf_internal.h"
#include "cbs.h"
#include "cbs_h264.h"
#include "h264.h"
#include "h264_levels.h"
#include "h264_sei.h"
enum {
PASS,
INSERT,
REMOVE,
EXTRACT,
};
enum {
FLIP_HORIZONTAL = 1,
FLIP_VERTICAL = 2,
};
enum {
LEVEL_UNSET = -2,
LEVEL_AUTO = -1,
};
typedef struct H264MetadataContext {
const AVClass *class;
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-07-06 00:46:40 +02:00
CodedBitstreamContext *input;
CodedBitstreamContext *output;
CodedBitstreamFragment access_unit;
int done_first_au;
int aud;
AVRational sample_aspect_ratio;
int overscan_appropriate_flag;
int video_format;
int video_full_range_flag;
int colour_primaries;
int transfer_characteristics;
int matrix_coefficients;
int chroma_sample_loc_type;
AVRational tick_rate;
int fixed_frame_rate_flag;
int crop_left;
int crop_right;
int crop_top;
int crop_bottom;
const char *sei_user_data;
int delete_filler;
int display_orientation;
double rotate;
int flip;
int level;
} H264MetadataContext;
static int h264_metadata_update_sps(AVBSFContext *bsf,
H264RawSPS *sps)
{
H264MetadataContext *ctx = bsf->priv_data;
int need_vui = 0;
int crop_unit_x, crop_unit_y;
if (ctx->sample_aspect_ratio.num && ctx->sample_aspect_ratio.den) {
// Table E-1.
static const AVRational sar_idc[] = {
{ 0, 0 }, // Unspecified (never written here).
{ 1, 1 }, { 12, 11 }, { 10, 11 }, { 16, 11 },
{ 40, 33 }, { 24, 11 }, { 20, 11 }, { 32, 11 },
{ 80, 33 }, { 18, 11 }, { 15, 11 }, { 64, 33 },
{ 160, 99 }, { 4, 3 }, { 3, 2 }, { 2, 1 },
};
int num, den, i;
av_reduce(&num, &den, ctx->sample_aspect_ratio.num,
ctx->sample_aspect_ratio.den, 65535);
for (i = 1; i < FF_ARRAY_ELEMS(sar_idc); i++) {
if (num == sar_idc[i].num &&
den == sar_idc[i].den)
break;
}
if (i == FF_ARRAY_ELEMS(sar_idc)) {
sps->vui.aspect_ratio_idc = 255;
sps->vui.sar_width = num;
sps->vui.sar_height = den;
} else {
sps->vui.aspect_ratio_idc = i;
}
sps->vui.aspect_ratio_info_present_flag = 1;
need_vui = 1;
}
#define SET_VUI_FIELD(field) do { \
if (ctx->field >= 0) { \
sps->vui.field = ctx->field; \
need_vui = 1; \
} \
} while (0)
if (ctx->overscan_appropriate_flag >= 0) {
SET_VUI_FIELD(overscan_appropriate_flag);
sps->vui.overscan_info_present_flag = 1;
}
if (ctx->video_format >= 0 ||
ctx->video_full_range_flag >= 0 ||
ctx->colour_primaries >= 0 ||
ctx->transfer_characteristics >= 0 ||
ctx->matrix_coefficients >= 0) {
SET_VUI_FIELD(video_format);
SET_VUI_FIELD(video_full_range_flag);
if (ctx->colour_primaries >= 0 ||
ctx->transfer_characteristics >= 0 ||
ctx->matrix_coefficients >= 0) {
SET_VUI_FIELD(colour_primaries);
SET_VUI_FIELD(transfer_characteristics);
SET_VUI_FIELD(matrix_coefficients);
sps->vui.colour_description_present_flag = 1;
}
sps->vui.video_signal_type_present_flag = 1;
}
if (ctx->chroma_sample_loc_type >= 0) {
sps->vui.chroma_sample_loc_type_top_field =
ctx->chroma_sample_loc_type;
sps->vui.chroma_sample_loc_type_bottom_field =
ctx->chroma_sample_loc_type;
sps->vui.chroma_loc_info_present_flag = 1;
need_vui = 1;
}
if (ctx->tick_rate.num && ctx->tick_rate.den) {
int num, den;
av_reduce(&num, &den, ctx->tick_rate.num, ctx->tick_rate.den,
UINT32_MAX > INT_MAX ? UINT32_MAX : INT_MAX);
sps->vui.time_scale = num;
sps->vui.num_units_in_tick = den;
sps->vui.timing_info_present_flag = 1;
need_vui = 1;
}
SET_VUI_FIELD(fixed_frame_rate_flag);
if (sps->separate_colour_plane_flag || sps->chroma_format_idc == 0) {
crop_unit_x = 1;
crop_unit_y = 2 - sps->frame_mbs_only_flag;
} else {
crop_unit_x = 1 + (sps->chroma_format_idc < 3);
crop_unit_y = (1 + (sps->chroma_format_idc < 2)) *
(2 - sps->frame_mbs_only_flag);
}
#define CROP(border, unit) do { \
if (ctx->crop_ ## border >= 0) { \
if (ctx->crop_ ## border % unit != 0) { \
av_log(bsf, AV_LOG_ERROR, "Invalid value for crop_%s: " \
"must be a multiple of %d.\n", #border, unit); \
return AVERROR(EINVAL); \
} \
sps->frame_crop_ ## border ## _offset = \
ctx->crop_ ## border / unit; \
sps->frame_cropping_flag = 1; \
} \
} while (0)
CROP(left, crop_unit_x);
CROP(right, crop_unit_x);
CROP(top, crop_unit_y);
CROP(bottom, crop_unit_y);
#undef CROP
if (ctx->level != LEVEL_UNSET) {
int level_idc;
if (ctx->level == LEVEL_AUTO) {
const H264LevelDescriptor *desc;
int64_t bit_rate;
int width, height, dpb_frames;
int framerate;
if (sps->vui.nal_hrd_parameters_present_flag) {
bit_rate = (sps->vui.nal_hrd_parameters.bit_rate_value_minus1[0] + 1) *
(INT64_C(1) << (sps->vui.nal_hrd_parameters.bit_rate_scale + 6));
} else if (sps->vui.vcl_hrd_parameters_present_flag) {
bit_rate = (sps->vui.vcl_hrd_parameters.bit_rate_value_minus1[0] + 1) *
(INT64_C(1) << (sps->vui.vcl_hrd_parameters.bit_rate_scale + 6));
// Adjust for VCL vs. NAL limits.
bit_rate = bit_rate * 6 / 5;
} else {
bit_rate = 0;
}
// Don't use max_dec_frame_buffering if it is only inferred.
dpb_frames = sps->vui.bitstream_restriction_flag ?
sps->vui.max_dec_frame_buffering : H264_MAX_DPB_FRAMES;
width = 16 * (sps->pic_width_in_mbs_minus1 + 1);
height = 16 * (sps->pic_height_in_map_units_minus1 + 1) *
(2 - sps->frame_mbs_only_flag);
if (sps->vui.timing_info_present_flag)
framerate = sps->vui.time_scale / sps->vui.num_units_in_tick / 2;
else
framerate = 0;
desc = ff_h264_guess_level(sps->profile_idc, bit_rate, framerate,
width, height, dpb_frames);
if (desc) {
level_idc = desc->level_idc;
} else {
av_log(bsf, AV_LOG_WARNING, "Stream does not appear to "
"conform to any level: using level 6.2.\n");
level_idc = 62;
}
} else {
level_idc = ctx->level;
}
if (level_idc == 9) {
if (sps->profile_idc == 66 ||
sps->profile_idc == 77 ||
sps->profile_idc == 88) {
sps->level_idc = 11;
sps->constraint_set3_flag = 1;
} else {
sps->level_idc = 9;
}
} else {
sps->level_idc = level_idc;
}
}
if (need_vui)
sps->vui_parameters_present_flag = 1;
return 0;
}
static int h264_metadata_update_side_data(AVBSFContext *bsf, AVPacket *pkt)
{
H264MetadataContext *ctx = bsf->priv_data;
CodedBitstreamFragment *au = &ctx->access_unit;
uint8_t *side_data;
int side_data_size;
int err, i;
side_data = av_packet_get_side_data(pkt, AV_PKT_DATA_NEW_EXTRADATA,
&side_data_size);
if (!side_data_size)
return 0;
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-07-06 00:46:40 +02:00
err = ff_cbs_read(ctx->input, au, side_data, side_data_size);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to read extradata from packet side data.\n");
return err;
}
for (i = 0; i < au->nb_units; i++) {
if (au->units[i].type == H264_NAL_SPS) {
err = h264_metadata_update_sps(bsf, au->units[i].content);
if (err < 0)
return err;
}
}
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-07-06 00:46:40 +02:00
err = ff_cbs_write_fragment_data(ctx->output, au);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to write extradata into packet side data.\n");
return err;
}
side_data = av_packet_new_side_data(pkt, AV_PKT_DATA_NEW_EXTRADATA, au->data_size);
if (!side_data)
return AVERROR(ENOMEM);
memcpy(side_data, au->data, au->data_size);
ff_cbs_fragment_reset(au);
return 0;
}
static int h264_metadata_filter(AVBSFContext *bsf, AVPacket *pkt)
{
H264MetadataContext *ctx = bsf->priv_data;
CodedBitstreamFragment *au = &ctx->access_unit;
int err, i, j, has_sps;
H264RawAUD aud;
err = ff_bsf_get_packet_ref(bsf, pkt);
if (err < 0)
return err;
err = h264_metadata_update_side_data(bsf, pkt);
if (err < 0)
goto fail;
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-07-06 00:46:40 +02:00
err = ff_cbs_read_packet(ctx->input, au, pkt);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to read packet.\n");
goto fail;
}
if (au->nb_units == 0) {
av_log(bsf, AV_LOG_ERROR, "No NAL units in packet.\n");
err = AVERROR_INVALIDDATA;
goto fail;
}
// If an AUD is present, it must be the first NAL unit.
if (au->units[0].type == H264_NAL_AUD) {
if (ctx->aud == REMOVE)
ff_cbs_delete_unit(au, 0);
} else {
if (ctx->aud == INSERT) {
static const int primary_pic_type_table[] = {
0x084, // 2, 7
0x0a5, // 0, 2, 5, 7
0x0e7, // 0, 1, 2, 5, 6, 7
0x210, // 4, 9
0x318, // 3, 4, 8, 9
0x294, // 2, 4, 7, 9
0x3bd, // 0, 2, 3, 4, 5, 7, 8, 9
0x3ff, // 0, 1, 2, 3, 4, 5, 6, 7, 8, 9
};
int primary_pic_type_mask = 0xff;
for (i = 0; i < au->nb_units; i++) {
if (au->units[i].type == H264_NAL_SLICE ||
au->units[i].type == H264_NAL_IDR_SLICE) {
H264RawSlice *slice = au->units[i].content;
for (j = 0; j < FF_ARRAY_ELEMS(primary_pic_type_table); j++) {
if (!(primary_pic_type_table[j] &
(1 << slice->header.slice_type)))
primary_pic_type_mask &= ~(1 << j);
}
}
}
for (j = 0; j < FF_ARRAY_ELEMS(primary_pic_type_table); j++)
if (primary_pic_type_mask & (1 << j))
break;
if (j >= FF_ARRAY_ELEMS(primary_pic_type_table)) {
av_log(bsf, AV_LOG_ERROR, "No usable primary_pic_type: "
"invalid slice types?\n");
err = AVERROR_INVALIDDATA;
goto fail;
}
aud = (H264RawAUD) {
.nal_unit_header.nal_unit_type = H264_NAL_AUD,
.primary_pic_type = j,
};
err = ff_cbs_insert_unit_content(au,
0, H264_NAL_AUD, &aud, NULL);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to insert AUD.\n");
goto fail;
}
}
}
has_sps = 0;
for (i = 0; i < au->nb_units; i++) {
if (au->units[i].type == H264_NAL_SPS) {
err = h264_metadata_update_sps(bsf, au->units[i].content);
if (err < 0)
goto fail;
has_sps = 1;
}
}
// Only insert the SEI in access units containing SPSs, and also
// unconditionally in the first access unit we ever see.
if (ctx->sei_user_data && (has_sps || !ctx->done_first_au)) {
H264RawSEIPayload payload = {
.payload_type = H264_SEI_TYPE_USER_DATA_UNREGISTERED,
};
H264RawSEIUserDataUnregistered *udu =
&payload.payload.user_data_unregistered;
for (i = j = 0; j < 32 && ctx->sei_user_data[i]; i++) {
int c, v;
c = ctx->sei_user_data[i];
if (c == '-') {
continue;
} else if (av_isxdigit(c)) {
c = av_tolower(c);
v = (c <= '9' ? c - '0' : c - 'a' + 10);
} else {
goto invalid_user_data;
}
if (j & 1)
udu->uuid_iso_iec_11578[j / 2] |= v;
else
udu->uuid_iso_iec_11578[j / 2] = v << 4;
++j;
}
if (j == 32 && ctx->sei_user_data[i] == '+') {
size_t len = strlen(ctx->sei_user_data + i + 1);
udu->data_ref = av_buffer_alloc(len + 1);
if (!udu->data_ref) {
err = AVERROR(ENOMEM);
goto fail;
}
udu->data = udu->data_ref->data;
udu->data_length = len + 1;
memcpy(udu->data, ctx->sei_user_data + i + 1, len + 1);
err = ff_cbs_h264_add_sei_message(au, &payload);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to add user data SEI "
"message to access unit.\n");
goto fail;
}
} else {
invalid_user_data:
av_log(bsf, AV_LOG_ERROR, "Invalid user data: "
"must be \"UUID+string\".\n");
err = AVERROR(EINVAL);
goto fail;
}
}
if (ctx->delete_filler) {
for (i = au->nb_units - 1; i >= 0; i--) {
if (au->units[i].type == H264_NAL_FILLER_DATA) {
ff_cbs_delete_unit(au, i);
continue;
}
if (au->units[i].type == H264_NAL_SEI) {
// Filler SEI messages.
H264RawSEI *sei = au->units[i].content;
for (j = sei->payload_count - 1; j >= 0; j--) {
if (sei->payload[j].payload_type ==
H264_SEI_TYPE_FILLER_PAYLOAD)
ff_cbs_h264_delete_sei_message(au, &au->units[i], j);
}
}
}
}
if (ctx->display_orientation != PASS) {
for (i = au->nb_units - 1; i >= 0; i--) {
H264RawSEI *sei;
if (au->units[i].type != H264_NAL_SEI)
continue;
sei = au->units[i].content;
for (j = sei->payload_count - 1; j >= 0; j--) {
H264RawSEIDisplayOrientation *disp;
int32_t *matrix;
if (sei->payload[j].payload_type !=
H264_SEI_TYPE_DISPLAY_ORIENTATION)
continue;
disp = &sei->payload[j].payload.display_orientation;
if (ctx->display_orientation == REMOVE ||
ctx->display_orientation == INSERT) {
ff_cbs_h264_delete_sei_message(au, &au->units[i], j);
continue;
}
matrix = av_malloc(9 * sizeof(int32_t));
if (!matrix) {
err = AVERROR(ENOMEM);
goto fail;
}
av_display_rotation_set(matrix,
disp->anticlockwise_rotation *
180.0 / 65536.0);
av_display_matrix_flip(matrix, disp->hor_flip, disp->ver_flip);
// If there are multiple display orientation messages in an
// access unit, then the last one added to the packet (i.e.
// the first one in the access unit) will prevail.
err = av_packet_add_side_data(pkt, AV_PKT_DATA_DISPLAYMATRIX,
(uint8_t*)matrix,
9 * sizeof(int32_t));
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to attach extracted "
"displaymatrix side data to packet.\n");
av_free(matrix);
goto fail;
}
}
}
}
if (ctx->display_orientation == INSERT) {
H264RawSEIPayload payload = {
.payload_type = H264_SEI_TYPE_DISPLAY_ORIENTATION,
};
H264RawSEIDisplayOrientation *disp =
&payload.payload.display_orientation;
uint8_t *data;
int size;
int write = 0;
data = av_packet_get_side_data(pkt, AV_PKT_DATA_DISPLAYMATRIX, &size);
if (data && size >= 9 * sizeof(int32_t)) {
int32_t matrix[9];
int hflip, vflip;
double angle;
memcpy(matrix, data, sizeof(matrix));
hflip = vflip = 0;
if (matrix[0] < 0 && matrix[4] > 0)
hflip = 1;
else if (matrix[0] > 0 && matrix[4] < 0)
vflip = 1;
av_display_matrix_flip(matrix, hflip, vflip);
angle = av_display_rotation_get(matrix);
if (!(angle >= -180.0 && angle <= 180.0 /* also excludes NaN */) ||
matrix[2] != 0 || matrix[5] != 0 ||
matrix[6] != 0 || matrix[7] != 0) {
av_log(bsf, AV_LOG_WARNING, "Input display matrix is not "
"representable in H.264 parameters.\n");
} else {
disp->hor_flip = hflip;
disp->ver_flip = vflip;
disp->anticlockwise_rotation =
(uint16_t)rint((angle >= 0.0 ? angle
: angle + 360.0) *
65536.0 / 360.0);
write = 1;
}
}
if (has_sps || !ctx->done_first_au) {
if (!isnan(ctx->rotate)) {
disp->anticlockwise_rotation =
(uint16_t)rint((ctx->rotate >= 0.0 ? ctx->rotate
: ctx->rotate + 360.0) *
65536.0 / 360.0);
write = 1;
}
if (ctx->flip) {
disp->hor_flip = !!(ctx->flip & FLIP_HORIZONTAL);
disp->ver_flip = !!(ctx->flip & FLIP_VERTICAL);
write = 1;
}
}
if (write) {
disp->display_orientation_repetition_period = 1;
err = ff_cbs_h264_add_sei_message(au, &payload);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to add display orientation "
"SEI message to access unit.\n");
goto fail;
}
}
}
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-07-06 00:46:40 +02:00
err = ff_cbs_write_packet(ctx->output, pkt, au);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to write packet.\n");
goto fail;
}
ctx->done_first_au = 1;
err = 0;
fail:
ff_cbs_fragment_reset(au);
if (err < 0)
av_packet_unref(pkt);
return err;
}
static int h264_metadata_init(AVBSFContext *bsf)
{
H264MetadataContext *ctx = bsf->priv_data;
CodedBitstreamFragment *au = &ctx->access_unit;
int err, i;
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-07-06 00:46:40 +02:00
err = ff_cbs_init(&ctx->input, AV_CODEC_ID_H264, bsf);
if (err < 0)
return err;
err = ff_cbs_init(&ctx->output, AV_CODEC_ID_H264, bsf);
if (err < 0)
return err;
if (bsf->par_in->extradata) {
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-07-06 00:46:40 +02:00
err = ff_cbs_read_extradata(ctx->input, au, bsf->par_in);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to read extradata.\n");
goto fail;
}
for (i = 0; i < au->nb_units; i++) {
if (au->units[i].type == H264_NAL_SPS) {
err = h264_metadata_update_sps(bsf, au->units[i].content);
if (err < 0)
goto fail;
}
}
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-07-06 00:46:40 +02:00
err = ff_cbs_write_extradata(ctx->output, bsf->par_out, au);
if (err < 0) {
av_log(bsf, AV_LOG_ERROR, "Failed to write extradata.\n");
goto fail;
}
}
err = 0;
fail:
ff_cbs_fragment_reset(au);
return err;
}
static void h264_metadata_close(AVBSFContext *bsf)
{
H264MetadataContext *ctx = bsf->priv_data;
ff_cbs_fragment_free(&ctx->access_unit);
avcodec/h26[45]_metadata_bsf: Use separate contexts for reading/writing Currently, both bsfs used the same CodedBitstreamContext for reading and writing; as a consequence, the state of the writer's context at the beginning of writing a fragment is exactly the state of the reader after having read the fragment; in particular, the writer might not have encountered one of its active parameter sets yet. This is not nice and may lead to invalid output even when the input is completely spec-compliant: Think of an access unit containing a primary coded picture referencing a PPS with id id (that is known from an earlier access unit/from extradata), then a new version of the PPS with id id and then a redundant coded picture that is also referencing the PPS with id id. This is spec-compliant, as the standard allows to overwrite a PPS with a different PPS in between coded pictures and not only at the beginning of an access unit. In this scenario, the reader would read the primary coded picture with the old PPS and the redundant coded picture with the new PPS (as it should); yet the writer would write both with the new PPS as extradata which might lead to errors or to invalid data being output without any error (e.g. if the two PPS differed in redundant_pic_cnt_present_flag). The above scenario does not directly translate to HEVC as long as one restricts oneself to input with nuh_layer_id == 0 only (as cbs_h265 does: it currently strips away any NAL unit with nuh_layer_id > 0 when decomposing); if one doesn't the same issue as above can happen. If one also allowed input packets to contain more than one access unit, issues like the above can happen even without redundant coded pictures/multiple layers. Therefore this commit uses separate contexts for reader and writer. Reviewed-by: Mark Thompson <sw@jkqxz.net> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2020-07-06 00:46:40 +02:00
ff_cbs_close(&ctx->input);
ff_cbs_close(&ctx->output);
}
#define OFFSET(x) offsetof(H264MetadataContext, x)
#define FLAGS (AV_OPT_FLAG_VIDEO_PARAM|AV_OPT_FLAG_BSF_PARAM)
static const AVOption h264_metadata_options[] = {
{ "aud", "Access Unit Delimiter NAL units",
OFFSET(aud), AV_OPT_TYPE_INT,
{ .i64 = PASS }, PASS, REMOVE, FLAGS, "aud" },
{ "pass", NULL, 0, AV_OPT_TYPE_CONST,
{ .i64 = PASS }, .flags = FLAGS, .unit = "aud" },
{ "insert", NULL, 0, AV_OPT_TYPE_CONST,
{ .i64 = INSERT }, .flags = FLAGS, .unit = "aud" },
{ "remove", NULL, 0, AV_OPT_TYPE_CONST,
{ .i64 = REMOVE }, .flags = FLAGS, .unit = "aud" },
{ "sample_aspect_ratio", "Set sample aspect ratio (table E-1)",
OFFSET(sample_aspect_ratio), AV_OPT_TYPE_RATIONAL,
{ .dbl = 0.0 }, 0, 65535, FLAGS },
{ "overscan_appropriate_flag", "Set VUI overscan appropriate flag",
OFFSET(overscan_appropriate_flag), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 1, FLAGS },
{ "video_format", "Set video format (table E-2)",
OFFSET(video_format), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 7, FLAGS},
{ "video_full_range_flag", "Set video full range flag",
OFFSET(video_full_range_flag), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 1, FLAGS },
{ "colour_primaries", "Set colour primaries (table E-3)",
OFFSET(colour_primaries), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 255, FLAGS },
{ "transfer_characteristics", "Set transfer characteristics (table E-4)",
OFFSET(transfer_characteristics), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 255, FLAGS },
{ "matrix_coefficients", "Set matrix coefficients (table E-5)",
OFFSET(matrix_coefficients), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 255, FLAGS },
{ "chroma_sample_loc_type", "Set chroma sample location type (figure E-1)",
OFFSET(chroma_sample_loc_type), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 6, FLAGS },
{ "tick_rate", "Set VUI tick rate (num_units_in_tick / time_scale)",
OFFSET(tick_rate), AV_OPT_TYPE_RATIONAL,
{ .dbl = 0.0 }, 0, UINT_MAX, FLAGS },
{ "fixed_frame_rate_flag", "Set VUI fixed frame rate flag",
OFFSET(fixed_frame_rate_flag), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, 1, FLAGS },
{ "crop_left", "Set left border crop offset",
OFFSET(crop_left), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, H264_MAX_WIDTH, FLAGS },
{ "crop_right", "Set right border crop offset",
OFFSET(crop_right), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, H264_MAX_WIDTH, FLAGS },
{ "crop_top", "Set top border crop offset",
OFFSET(crop_top), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, H264_MAX_HEIGHT, FLAGS },
{ "crop_bottom", "Set bottom border crop offset",
OFFSET(crop_bottom), AV_OPT_TYPE_INT,
{ .i64 = -1 }, -1, H264_MAX_HEIGHT, FLAGS },
{ "sei_user_data", "Insert SEI user data (UUID+string)",
OFFSET(sei_user_data), AV_OPT_TYPE_STRING, { .str = NULL }, .flags = FLAGS },
{ "delete_filler", "Delete all filler (both NAL and SEI)",
OFFSET(delete_filler), AV_OPT_TYPE_INT, { .i64 = 0 }, 0, 1, FLAGS},
{ "display_orientation", "Display orientation SEI",
OFFSET(display_orientation), AV_OPT_TYPE_INT,
{ .i64 = PASS }, PASS, EXTRACT, FLAGS, "disp_or" },
{ "pass", NULL, 0, AV_OPT_TYPE_CONST,
{ .i64 = PASS }, .flags = FLAGS, .unit = "disp_or" },
{ "insert", NULL, 0, AV_OPT_TYPE_CONST,
{ .i64 = INSERT }, .flags = FLAGS, .unit = "disp_or" },
{ "remove", NULL, 0, AV_OPT_TYPE_CONST,
{ .i64 = REMOVE }, .flags = FLAGS, .unit = "disp_or" },
{ "extract", NULL, 0, AV_OPT_TYPE_CONST,
{ .i64 = EXTRACT }, .flags = FLAGS, .unit = "disp_or" },
{ "rotate", "Set rotation in display orientation SEI (anticlockwise angle in degrees)",
OFFSET(rotate), AV_OPT_TYPE_DOUBLE,
{ .dbl = NAN }, -360.0, +360.0, FLAGS },
{ "flip", "Set flip in display orientation SEI",
OFFSET(flip), AV_OPT_TYPE_FLAGS,
{ .i64 = 0 }, 0, FLIP_HORIZONTAL | FLIP_VERTICAL, FLAGS, "flip" },
{ "horizontal", "Set hor_flip",
0, AV_OPT_TYPE_CONST,
{ .i64 = FLIP_HORIZONTAL }, .flags = FLAGS, .unit = "flip" },
{ "vertical", "Set ver_flip",
0, AV_OPT_TYPE_CONST,
{ .i64 = FLIP_VERTICAL }, .flags = FLAGS, .unit = "flip" },
{ "level", "Set level (table A-1)",
OFFSET(level), AV_OPT_TYPE_INT,
{ .i64 = LEVEL_UNSET }, LEVEL_UNSET, 0xff, FLAGS, "level" },
{ "auto", "Attempt to guess level from stream properties",
0, AV_OPT_TYPE_CONST,
{ .i64 = LEVEL_AUTO }, .flags = FLAGS, .unit = "level" },
#define LEVEL(name, value) name, NULL, 0, AV_OPT_TYPE_CONST, \
{ .i64 = value }, .flags = FLAGS, .unit = "level"
{ LEVEL("1", 10) },
{ LEVEL("1b", 9) },
{ LEVEL("1.1", 11) },
{ LEVEL("1.2", 12) },
{ LEVEL("1.3", 13) },
{ LEVEL("2", 20) },
{ LEVEL("2.1", 21) },
{ LEVEL("2.2", 22) },
{ LEVEL("3", 30) },
{ LEVEL("3.1", 31) },
{ LEVEL("3.2", 32) },
{ LEVEL("4", 40) },
{ LEVEL("4.1", 41) },
{ LEVEL("4.2", 42) },
{ LEVEL("5", 50) },
{ LEVEL("5.1", 51) },
{ LEVEL("5.2", 52) },
{ LEVEL("6", 60) },
{ LEVEL("6.1", 61) },
{ LEVEL("6.2", 62) },
#undef LEVEL
{ NULL }
};
static const AVClass h264_metadata_class = {
.class_name = "h264_metadata_bsf",
.item_name = av_default_item_name,
.option = h264_metadata_options,
.version = LIBAVUTIL_VERSION_INT,
};
static const enum AVCodecID h264_metadata_codec_ids[] = {
AV_CODEC_ID_H264, AV_CODEC_ID_NONE,
};
const AVBitStreamFilter ff_h264_metadata_bsf = {
.name = "h264_metadata",
.priv_data_size = sizeof(H264MetadataContext),
.priv_class = &h264_metadata_class,
.init = &h264_metadata_init,
.close = &h264_metadata_close,
.filter = &h264_metadata_filter,
.codec_ids = h264_metadata_codec_ids,
};