1
0
mirror of https://github.com/FFmpeg/FFmpeg.git synced 2024-11-26 19:01:44 +02:00
FFmpeg/libavformat/mpegts.c

3459 lines
117 KiB
C
Raw Normal View History

/*
* MPEG-2 transport stream (aka DVB) demuxer
* Copyright (c) 2002-2003 Fabrice Bellard
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "config_components.h"
#include "libavutil/buffer.h"
#include "libavutil/common.h"
#include "libavutil/crc.h"
#include "libavutil/internal.h"
#include "libavutil/intreadwrite.h"
#include "libavutil/log.h"
#include "libavutil/dict.h"
#include "libavutil/mathematics.h"
#include "libavutil/opt.h"
#include "libavutil/avassert.h"
#include "libavutil/dovi_meta.h"
#include "libavcodec/avcodec.h"
#include "libavcodec/bytestream.h"
#include "libavcodec/defs.h"
2011-10-12 00:49:59 +03:00
#include "libavcodec/get_bits.h"
#include "libavcodec/opus.h"
#include "avformat.h"
#include "mpegts.h"
#include "internal.h"
#include "avio_internal.h"
#include "demux.h"
#include "mpeg.h"
#include "isom.h"
#if CONFIG_ICONV
#include <iconv.h>
#endif
/* maximum size in which we look for synchronization if
* synchronization is lost */
#define MAX_RESYNC_SIZE 65536
#define MAX_MP4_DESCR_COUNT 16
#define MOD_UNLIKELY(modulus, dividend, divisor, prev_dividend) \
do { \
if ((prev_dividend) == 0 || (dividend) - (prev_dividend) != (divisor)) \
(modulus) = (dividend) % (divisor); \
(prev_dividend) = (dividend); \
} while (0)
#define PROBE_PACKET_MAX_BUF 8192
#define PROBE_PACKET_MARGIN 5
enum MpegTSFilterType {
MPEGTS_PES,
MPEGTS_SECTION,
MPEGTS_PCR,
};
typedef struct MpegTSFilter MpegTSFilter;
typedef int PESCallback (MpegTSFilter *f, const uint8_t *buf, int len,
int is_start, int64_t pos);
typedef struct MpegTSPESFilter {
PESCallback *pes_cb;
void *opaque;
} MpegTSPESFilter;
typedef void SectionCallback (MpegTSFilter *f, const uint8_t *buf, int len);
typedef void SetServiceCallback (void *opaque, int ret);
typedef struct MpegTSSectionFilter {
int section_index;
int section_h_size;
int last_ver;
unsigned crc;
unsigned last_crc;
uint8_t *section_buf;
unsigned int check_crc : 1;
unsigned int end_of_section_reached : 1;
SectionCallback *section_cb;
void *opaque;
} MpegTSSectionFilter;
struct MpegTSFilter {
int pid;
2011-10-10 22:50:00 +03:00
int es_id;
int last_cc; /* last cc code (-1 if first packet) */
int64_t last_pcr;
int discard;
enum MpegTSFilterType type;
union {
MpegTSPESFilter pes_filter;
MpegTSSectionFilter section_filter;
} u;
};
struct Stream {
int idx;
int stream_identifier;
};
#define MAX_STREAMS_PER_PROGRAM 128
#define MAX_PIDS_PER_PROGRAM (MAX_STREAMS_PER_PROGRAM + 2)
struct Program {
unsigned int id; // program id/service id
unsigned int nb_pids;
unsigned int pids[MAX_PIDS_PER_PROGRAM];
unsigned int nb_streams;
struct Stream streams[MAX_STREAMS_PER_PROGRAM];
/** have we found pmt for this program */
int pmt_found;
};
struct MpegTSContext {
const AVClass *class;
/* user data */
AVFormatContext *stream;
/** raw packet size, including FEC if present */
int raw_packet_size;
int64_t pos47_full;
/** if true, all pids are analyzed to find streams */
int auto_guess;
/** compute exact PCR for each transport stream packet */
int mpeg2ts_compute_pcr;
/** fix dvb teletext pts */
int fix_teletext_pts;
int64_t cur_pcr; /**< used to estimate the exact PCR */
int64_t pcr_incr; /**< used to estimate the exact PCR */
/* data needed to handle file based ts */
/** stop parsing loop */
int stop_parse;
/** packet containing Audio/Video data */
AVPacket *pkt;
/** to detect seek */
int64_t last_pos;
int skip_changes;
int skip_clear;
avformat/mpegts: add skip_unknown_pmt option Some filtered mpegts streams may erroneously include PMTs for programs that are not advertised in the PAT. This confuses ffmpeg and most players because multiple audio/video streams are created and it is unclear which ones actually contain data. See for example https://tmm1.s3.amazonaws.com/unknown-pmts.ts In this sample, the PAT advertises exactly one program. But the pid it points to for the program's PMT contains PMTs for other programs as well. This is because the broadcaster decided to re-use the same pid for multiple program PMTs. The hardware that filtered the original multi-program stream into a single-program stream did so by rewriting the PAT to contain only the program that was requested. But since it just passed through the PMT pid referenced in the PAT, multiple PMTs are still present for the other programs. Before: Input #0, mpegts, from 'unknown-pmts.ts': Duration: 00:00:10.11, start: 80741.189700, bitrate: 9655 kb/s Program 4 Stream #0:2[0x41]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt709, progressive), 1280x720 [SAR 1:1 DAR 16:9], Closed Captions, 11063 kb/s, 59.94 fps, 59.94 tbr, 90k tbn, 119.88 tbc Stream #0:3[0x44](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s Stream #0:4[0x45](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, stereo, fltp, 128 kb/s No Program Stream #0:0[0x31]: Video: mpeg2video ([2][0][0][0] / 0x0002), none(tv), 90k tbr, 90k tbn, 90k tbc Stream #0:1[0x34](eng): Audio: ac3 (AC-3 / 0x332D4341), 0 channels, fltp Stream #0:5[0x51]: Video: mpeg2video ([2][0][0][0] / 0x0002), none, 90k tbr, 90k tbn Stream #0:6[0x54](eng): Audio: ac3 (AC-3 / 0x332D4341), 0 channels With skip_unknown_pmt=1: Input #0, mpegts, from 'unknown-pmts.ts': Duration: 00:00:10.11, start: 80741.189700, bitrate: 9655 kb/s Program 4 Stream #0:0[0x41]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt709, progressive), 1280x720 [SAR 1:1 DAR 16:9], Closed Captions, 11063 kb/s, 59.94 fps, 59.94 tbr, 90k tbn, 119.88 tbc Stream #0:1[0x44](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s Stream #0:2[0x45](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, stereo, fltp, 128 kb/s Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-08 21:49:43 +02:00
int skip_unknown_pmt;
int scan_all_pmts;
2014-08-25 13:11:32 +03:00
int resync_size;
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
int merge_pmt_versions;
int max_packet_size;
2014-08-25 13:11:32 +03:00
int id;
/******************************************/
/* private mpegts data */
/* scan context */
/** structure to keep track of Program->pids mapping */
unsigned int nb_prg;
struct Program *prg;
int8_t crc_validity[NB_PID_MAX];
/** filters for various streams specified by PMT + for the PAT and PMT */
MpegTSFilter *pids[NB_PID_MAX];
int current_pid;
AVStream *epg_stream;
AVBufferPool* pools[32];
};
2014-08-25 13:11:32 +03:00
#define MPEGTS_OPTIONS \
{ "resync_size", "set size limit for looking up a new synchronization", \
offsetof(MpegTSContext, resync_size), AV_OPT_TYPE_INT, \
{ .i64 = MAX_RESYNC_SIZE}, 0, INT_MAX, AV_OPT_FLAG_DECODING_PARAM }, \
{ "ts_id", "transport stream id", \
offsetof(MpegTSContext, id), AV_OPT_TYPE_INT, \
{ .i64 = 0 }, 0, INT_MAX, AV_OPT_FLAG_EXPORT | AV_OPT_FLAG_READONLY }, \
{ "ts_packetsize", "output option carrying the raw packet size", \
offsetof(MpegTSContext, raw_packet_size), AV_OPT_TYPE_INT, \
{ .i64 = 0 }, 0, INT_MAX, AV_OPT_FLAG_EXPORT | AV_OPT_FLAG_READONLY }
2014-08-25 13:11:32 +03:00
static const AVOption options[] = {
MPEGTS_OPTIONS,
{"fix_teletext_pts", "try to fix pts values of dvb teletext streams", offsetof(MpegTSContext, fix_teletext_pts), AV_OPT_TYPE_BOOL,
{.i64 = 1}, 0, 1, AV_OPT_FLAG_DECODING_PARAM },
{"scan_all_pmts", "scan and combine all PMTs", offsetof(MpegTSContext, scan_all_pmts), AV_OPT_TYPE_BOOL,
{.i64 = -1}, -1, 1, AV_OPT_FLAG_DECODING_PARAM },
avformat/mpegts: add skip_unknown_pmt option Some filtered mpegts streams may erroneously include PMTs for programs that are not advertised in the PAT. This confuses ffmpeg and most players because multiple audio/video streams are created and it is unclear which ones actually contain data. See for example https://tmm1.s3.amazonaws.com/unknown-pmts.ts In this sample, the PAT advertises exactly one program. But the pid it points to for the program's PMT contains PMTs for other programs as well. This is because the broadcaster decided to re-use the same pid for multiple program PMTs. The hardware that filtered the original multi-program stream into a single-program stream did so by rewriting the PAT to contain only the program that was requested. But since it just passed through the PMT pid referenced in the PAT, multiple PMTs are still present for the other programs. Before: Input #0, mpegts, from 'unknown-pmts.ts': Duration: 00:00:10.11, start: 80741.189700, bitrate: 9655 kb/s Program 4 Stream #0:2[0x41]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt709, progressive), 1280x720 [SAR 1:1 DAR 16:9], Closed Captions, 11063 kb/s, 59.94 fps, 59.94 tbr, 90k tbn, 119.88 tbc Stream #0:3[0x44](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s Stream #0:4[0x45](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, stereo, fltp, 128 kb/s No Program Stream #0:0[0x31]: Video: mpeg2video ([2][0][0][0] / 0x0002), none(tv), 90k tbr, 90k tbn, 90k tbc Stream #0:1[0x34](eng): Audio: ac3 (AC-3 / 0x332D4341), 0 channels, fltp Stream #0:5[0x51]: Video: mpeg2video ([2][0][0][0] / 0x0002), none, 90k tbr, 90k tbn Stream #0:6[0x54](eng): Audio: ac3 (AC-3 / 0x332D4341), 0 channels With skip_unknown_pmt=1: Input #0, mpegts, from 'unknown-pmts.ts': Duration: 00:00:10.11, start: 80741.189700, bitrate: 9655 kb/s Program 4 Stream #0:0[0x41]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt709, progressive), 1280x720 [SAR 1:1 DAR 16:9], Closed Captions, 11063 kb/s, 59.94 fps, 59.94 tbr, 90k tbn, 119.88 tbc Stream #0:1[0x44](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s Stream #0:2[0x45](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, stereo, fltp, 128 kb/s Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-08 21:49:43 +02:00
{"skip_unknown_pmt", "skip PMTs for programs not advertised in the PAT", offsetof(MpegTSContext, skip_unknown_pmt), AV_OPT_TYPE_BOOL,
{.i64 = 0}, 0, 1, AV_OPT_FLAG_DECODING_PARAM },
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
{"merge_pmt_versions", "re-use streams when PMT's version/pids change", offsetof(MpegTSContext, merge_pmt_versions), AV_OPT_TYPE_BOOL,
{.i64 = 0}, 0, 1, AV_OPT_FLAG_DECODING_PARAM },
{"skip_changes", "skip changing / adding streams / programs", offsetof(MpegTSContext, skip_changes), AV_OPT_TYPE_BOOL,
{.i64 = 0}, 0, 1, 0 },
{"skip_clear", "skip clearing programs", offsetof(MpegTSContext, skip_clear), AV_OPT_TYPE_BOOL,
{.i64 = 0}, 0, 1, 0 },
{"max_packet_size", "maximum size of emitted packet", offsetof(MpegTSContext, max_packet_size), AV_OPT_TYPE_INT,
{.i64 = 204800}, 1, INT_MAX/2, AV_OPT_FLAG_DECODING_PARAM },
{ NULL },
};
static const AVClass mpegts_class = {
.class_name = "mpegts demuxer",
.item_name = av_default_item_name,
.option = options,
.version = LIBAVUTIL_VERSION_INT,
};
static const AVOption raw_options[] = {
MPEGTS_OPTIONS,
{ "compute_pcr", "compute exact PCR for each transport stream packet",
offsetof(MpegTSContext, mpeg2ts_compute_pcr), AV_OPT_TYPE_BOOL,
{ .i64 = 0 }, 0, 1, AV_OPT_FLAG_DECODING_PARAM },
{ NULL },
};
static const AVClass mpegtsraw_class = {
.class_name = "mpegtsraw demuxer",
.item_name = av_default_item_name,
.option = raw_options,
.version = LIBAVUTIL_VERSION_INT,
};
/* TS stream handling */
enum MpegTSState {
MPEGTS_HEADER = 0,
MPEGTS_PESHEADER,
MPEGTS_PESHEADER_FILL,
MPEGTS_PAYLOAD,
MPEGTS_SKIP,
};
/* enough for PES header + length */
#define PES_START_SIZE 6
#define PES_HEADER_SIZE 9
#define MAX_PES_HEADER_SIZE (9 + 255)
typedef struct PESContext {
int pid;
int pcr_pid; /**< if -1 then all packets containing PCR are considered */
int stream_type;
MpegTSContext *ts;
AVFormatContext *stream;
AVStream *st;
AVStream *sub_st; /**< stream for the embedded AC3 stream in HDMV TrueHD */
enum MpegTSState state;
/* used to get the format */
int data_index;
int flags; /**< copied to the AVPacket flags */
int PES_packet_length;
int pes_header_size;
int extended_stream_id;
uint8_t stream_id;
int64_t pts, dts;
int64_t ts_packet_pos; /**< position of first TS packet of this PES packet */
uint8_t header[MAX_PES_HEADER_SIZE];
AVBufferRef *buffer;
2011-10-12 00:49:59 +03:00
SLConfigDescr sl;
int merged_st;
} PESContext;
extern const FFInputFormat ff_mpegts_demuxer;
static struct Program * get_program(MpegTSContext *ts, unsigned int programid)
{
int i;
for (i = 0; i < ts->nb_prg; i++) {
if (ts->prg[i].id == programid) {
return &ts->prg[i];
}
}
return NULL;
}
static void clear_avprogram(MpegTSContext *ts, unsigned int programid)
{
AVProgram *prg = NULL;
int i;
for (i = 0; i < ts->stream->nb_programs; i++)
if (ts->stream->programs[i]->id == programid) {
prg = ts->stream->programs[i];
break;
}
if (!prg)
return;
prg->nb_stream_indexes = 0;
}
static void clear_program(struct Program *p)
{
if (!p)
return;
p->nb_pids = 0;
p->nb_streams = 0;
p->pmt_found = 0;
}
static void clear_programs(MpegTSContext *ts)
{
av_freep(&ts->prg);
ts->nb_prg = 0;
}
static struct Program * add_program(MpegTSContext *ts, unsigned int programid)
{
struct Program *p = get_program(ts, programid);
if (p)
return p;
if (av_reallocp_array(&ts->prg, ts->nb_prg + 1, sizeof(*ts->prg)) < 0) {
ts->nb_prg = 0;
return NULL;
}
p = &ts->prg[ts->nb_prg];
p->id = programid;
clear_program(p);
ts->nb_prg++;
return p;
}
static void add_pid_to_program(struct Program *p, unsigned int pid)
{
int i;
if (!p)
return;
if (p->nb_pids >= MAX_PIDS_PER_PROGRAM)
return;
for (i = 0; i < p->nb_pids; i++)
if (p->pids[i] == pid)
return;
p->pids[p->nb_pids++] = pid;
}
static void update_av_program_info(AVFormatContext *s, unsigned int programid,
unsigned int pid, int version)
2011-03-11 14:39:55 +02:00
{
int i;
for (i = 0; i < s->nb_programs; i++) {
AVProgram *program = s->programs[i];
if (program->id == programid) {
int old_pcr_pid = program->pcr_pid,
old_version = program->pmt_version;
program->pcr_pid = pid;
program->pmt_version = version;
if (old_version != -1 && old_version != version) {
av_log(s, AV_LOG_VERBOSE,
"detected PMT change (program=%d, version=%d/%d, pcr_pid=0x%x/0x%x)\n",
programid, old_version, version, old_pcr_pid, pid);
}
2011-03-11 14:39:55 +02:00
break;
}
}
}
/**
* @brief discard_pid() decides if the pid is to be discarded according
* to caller's programs selection
* @param ts : - TS context
* @param pid : - pid
* @return 1 if the pid is only comprised in programs that have .discard=AVDISCARD_ALL
* 0 otherwise
*/
static int discard_pid(MpegTSContext *ts, unsigned int pid)
{
int i, j, k;
int used = 0, discarded = 0;
struct Program *p;
if (pid == PAT_PID)
return 0;
/* If none of the programs have .discard=AVDISCARD_ALL then there's
* no way we have to discard this packet */
for (k = 0; k < ts->stream->nb_programs; k++)
if (ts->stream->programs[k]->discard == AVDISCARD_ALL)
break;
if (k == ts->stream->nb_programs)
return 0;
for (i = 0; i < ts->nb_prg; i++) {
p = &ts->prg[i];
for (j = 0; j < p->nb_pids; j++) {
if (p->pids[j] != pid)
continue;
// is program with id p->id set to be discarded?
for (k = 0; k < ts->stream->nb_programs; k++) {
if (ts->stream->programs[k]->id == p->id) {
if (ts->stream->programs[k]->discard == AVDISCARD_ALL)
discarded++;
else
used++;
}
}
}
}
return !used && discarded;
}
/**
* Assemble PES packets out of TS packets, and then call the "section_cb"
* function when they are complete.
*/
static void write_section_data(MpegTSContext *ts, MpegTSFilter *tss1,
const uint8_t *buf, int buf_size, int is_start)
{
MpegTSSectionFilter *tss = &tss1->u.section_filter;
avformat/mpegts: parse sections with multiple tables Fixes PMT parsing in some mpegts streams which contain multiple tables within the PMT pid. Previously, the parser assumed only one table was present in each packet, and discarded the rest of the section data after attempting to parse the first table. A similar issue was documented in the BeyondTV software[1], which helped me diagnose the same bug in the ffmpeg mpegts demuxer. I also tried DVBInspector, libdvbpsi's dvbinfo, and tstools' tsinfo to help debug. The former two properly read PMTs with multiple tables, whereas the last has the same bug as ffmpeg. I've created a minimal sample[2] which contains the combined PMT. Here's what ffmpeg probe shows before and after this patch: Before: Input #0, mpegts, from 'combined-pmt-tids.ts': Duration: 00:00:01.08, start: 4932.966167, bitrate: 741 kb/s Program 1 No Program Stream #0:0[0xf9d]: Audio: ac3, 48000 Hz, mono, fltp, 96 kb/s Stream #0:1[0xf9b]: Audio: mp3, 0 channels, fltp Stream #0:2[0xf9c]: Unknown: none After: Input #0, mpegts, from 'combined-pmt-tids.ts': Duration: 00:00:01.11, start: 4932.966167, bitrate: 718 kb/s Program 1 Stream #0:0[0xf9b]: Video: mpeg2video ([2][0][0][0] / 0x0002), none(tv, top first), 29.97 fps, 29.97 tbr, 90k tbn, 90k tbc Stream #0:1[0xf9c](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s Stream #0:2[0xf9d](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, mono, fltp, 96 kb/s With the patch, the PMT is parsed correctly so the streams are created in the correct order, are associated with "Program 1", and their codecs are set correctly. [1] http://forums.snapstream.com/vb/showpost.php?p=343816&postcount=201 [2] https://s3.amazonaws.com/tmm1/combined-pmt-tids.ts Signed-off-by: Aman Gupta <aman@tmm1.net> Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2018-05-09 23:20:48 +02:00
uint8_t *cur_section_buf = NULL;
int len, offset;
if (is_start) {
memcpy(tss->section_buf, buf, buf_size);
tss->section_index = buf_size;
tss->section_h_size = -1;
tss->end_of_section_reached = 0;
} else {
if (tss->end_of_section_reached)
return;
len = MAX_SECTION_SIZE - tss->section_index;
if (buf_size < len)
len = buf_size;
memcpy(tss->section_buf + tss->section_index, buf, len);
tss->section_index += len;
}
avformat/mpegts: parse sections with multiple tables Fixes PMT parsing in some mpegts streams which contain multiple tables within the PMT pid. Previously, the parser assumed only one table was present in each packet, and discarded the rest of the section data after attempting to parse the first table. A similar issue was documented in the BeyondTV software[1], which helped me diagnose the same bug in the ffmpeg mpegts demuxer. I also tried DVBInspector, libdvbpsi's dvbinfo, and tstools' tsinfo to help debug. The former two properly read PMTs with multiple tables, whereas the last has the same bug as ffmpeg. I've created a minimal sample[2] which contains the combined PMT. Here's what ffmpeg probe shows before and after this patch: Before: Input #0, mpegts, from 'combined-pmt-tids.ts': Duration: 00:00:01.08, start: 4932.966167, bitrate: 741 kb/s Program 1 No Program Stream #0:0[0xf9d]: Audio: ac3, 48000 Hz, mono, fltp, 96 kb/s Stream #0:1[0xf9b]: Audio: mp3, 0 channels, fltp Stream #0:2[0xf9c]: Unknown: none After: Input #0, mpegts, from 'combined-pmt-tids.ts': Duration: 00:00:01.11, start: 4932.966167, bitrate: 718 kb/s Program 1 Stream #0:0[0xf9b]: Video: mpeg2video ([2][0][0][0] / 0x0002), none(tv, top first), 29.97 fps, 29.97 tbr, 90k tbn, 90k tbc Stream #0:1[0xf9c](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s Stream #0:2[0xf9d](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, mono, fltp, 96 kb/s With the patch, the PMT is parsed correctly so the streams are created in the correct order, are associated with "Program 1", and their codecs are set correctly. [1] http://forums.snapstream.com/vb/showpost.php?p=343816&postcount=201 [2] https://s3.amazonaws.com/tmm1/combined-pmt-tids.ts Signed-off-by: Aman Gupta <aman@tmm1.net> Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2018-05-09 23:20:48 +02:00
offset = 0;
cur_section_buf = tss->section_buf;
while (cur_section_buf - tss->section_buf < MAX_SECTION_SIZE && cur_section_buf[0] != 0xff) {
/* compute section length if possible */
if (tss->section_h_size == -1 && tss->section_index - offset >= 3) {
len = (AV_RB16(cur_section_buf + 1) & 0xfff) + 3;
if (len > MAX_SECTION_SIZE)
return;
tss->section_h_size = len;
}
if (tss->section_h_size != -1 &&
tss->section_index >= offset + tss->section_h_size) {
int crc_valid = 1;
tss->end_of_section_reached = 1;
if (tss->check_crc) {
crc_valid = !av_crc(av_crc_get_table(AV_CRC_32_IEEE), -1, cur_section_buf, tss->section_h_size);
if (tss->section_h_size >= 4)
tss->crc = AV_RB32(cur_section_buf + tss->section_h_size - 4);
if (crc_valid) {
ts->crc_validity[ tss1->pid ] = 100;
}else if (ts->crc_validity[ tss1->pid ] > -10) {
ts->crc_validity[ tss1->pid ]--;
}else
crc_valid = 2;
}
if (crc_valid) {
tss->section_cb(tss1, cur_section_buf, tss->section_h_size);
if (crc_valid != 1)
tss->last_ver = -1;
}
avformat/mpegts: parse sections with multiple tables Fixes PMT parsing in some mpegts streams which contain multiple tables within the PMT pid. Previously, the parser assumed only one table was present in each packet, and discarded the rest of the section data after attempting to parse the first table. A similar issue was documented in the BeyondTV software[1], which helped me diagnose the same bug in the ffmpeg mpegts demuxer. I also tried DVBInspector, libdvbpsi's dvbinfo, and tstools' tsinfo to help debug. The former two properly read PMTs with multiple tables, whereas the last has the same bug as ffmpeg. I've created a minimal sample[2] which contains the combined PMT. Here's what ffmpeg probe shows before and after this patch: Before: Input #0, mpegts, from 'combined-pmt-tids.ts': Duration: 00:00:01.08, start: 4932.966167, bitrate: 741 kb/s Program 1 No Program Stream #0:0[0xf9d]: Audio: ac3, 48000 Hz, mono, fltp, 96 kb/s Stream #0:1[0xf9b]: Audio: mp3, 0 channels, fltp Stream #0:2[0xf9c]: Unknown: none After: Input #0, mpegts, from 'combined-pmt-tids.ts': Duration: 00:00:01.11, start: 4932.966167, bitrate: 718 kb/s Program 1 Stream #0:0[0xf9b]: Video: mpeg2video ([2][0][0][0] / 0x0002), none(tv, top first), 29.97 fps, 29.97 tbr, 90k tbn, 90k tbc Stream #0:1[0xf9c](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s Stream #0:2[0xf9d](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, mono, fltp, 96 kb/s With the patch, the PMT is parsed correctly so the streams are created in the correct order, are associated with "Program 1", and their codecs are set correctly. [1] http://forums.snapstream.com/vb/showpost.php?p=343816&postcount=201 [2] https://s3.amazonaws.com/tmm1/combined-pmt-tids.ts Signed-off-by: Aman Gupta <aman@tmm1.net> Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2018-05-09 23:20:48 +02:00
cur_section_buf += tss->section_h_size;
offset += tss->section_h_size;
tss->section_h_size = -1;
} else {
avformat/mpegts: parse large PMTs with multiple tables In 9152c1e4955, the mpegts parser was taught how to parse PMT sections which contained multiple tables. That commit fixed parsing of PMT packets from some cable providers, which included a special SCTE table (0xc0) before the standard program map table (0x2). Sometimes, however, the combined 0xc0 and 0x2 tables are larger than a single TS packet (188 bytes). The mpegts parser already attempts to parse sections which span multiple packets, but still assumed that the split section only contained one table. This patch fixes parsing of such a sample[1]. Before: Input #0, mpegts, from 'combined-pmt-tids-split.ts': Duration: 00:00:01.26, start: 39188.931756, bitrate: 597 kb/s Program 1 No Program Stream #0:0[0xeff]: Audio: ac3, 48000 Hz, mono, fltp, 64 kb/s Stream #0:1[0xefd]: Audio: mp3, 0 channels, fltp Stream #0:2[0xefe]: Unknown: none After: Input #0, mpegts, from 'combined-pmt-tids-split.ts': Duration: 00:00:01.27, start: 39188.931756, bitrate: 589 kb/s Program 1 Stream #0:0[0xefd]: Video: h264 ([27][0][0][0] / 0x001B), none, 59.94 fps, 59.94 tbr, 90k tbn, 180k tbc Stream #0:1[0xefe](eng): Audio: ac3 ([129][0][0][0] / 0x0081), 48000 Hz, stereo, fltp, 384 kb/s Stream #0:2[0xeff](spa): Audio: ac3 ([129][0][0][0] / 0x0081), 48000 Hz, mono, fltp, 64 kb/s Stream #0:3[0xf00]: Data: scte_35 Stream #0:4[0xf01]: Unknown: none (ETV1 / 0x31565445) Stream #0:5[0xf02]: Unknown: none (ETV1 / 0x31565445) Stream #0:6[0xf03]: Unknown: none ([192][0][0][0] / 0x00C0) With the patch, the PMT is parsed correctly so the streams are created in the correct order, are associated with "Program 1", and their codecs are set correctly. [1] https://s3.amazonaws.com/tmm1/combined-pmt-tids-split.ts Signed-off-by: Aman Gupta <aman@tmm1.net> Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2018-06-11 09:43:31 +02:00
tss->section_h_size = -1;
tss->end_of_section_reached = 0;
break;
}
}
}
static MpegTSFilter *mpegts_open_filter(MpegTSContext *ts, unsigned int pid,
enum MpegTSFilterType type)
{
MpegTSFilter *filter;
av_log(ts->stream, AV_LOG_TRACE, "Filter: pid=0x%x type=%d\n", pid, type);
if (pid >= NB_PID_MAX || ts->pids[pid])
return NULL;
filter = av_mallocz(sizeof(MpegTSFilter));
if (!filter)
return NULL;
ts->pids[pid] = filter;
filter->type = type;
filter->pid = pid;
filter->es_id = -1;
filter->last_cc = -1;
filter->last_pcr= -1;
return filter;
}
static MpegTSFilter *mpegts_open_section_filter(MpegTSContext *ts,
unsigned int pid,
SectionCallback *section_cb,
void *opaque,
int check_crc)
{
MpegTSFilter *filter;
MpegTSSectionFilter *sec;
uint8_t *section_buf = av_mallocz(MAX_SECTION_SIZE);
if (!section_buf)
return NULL;
if (!(filter = mpegts_open_filter(ts, pid, MPEGTS_SECTION))) {
av_free(section_buf);
return NULL;
}
sec = &filter->u.section_filter;
sec->section_cb = section_cb;
sec->opaque = opaque;
sec->section_buf = section_buf;
sec->check_crc = check_crc;
sec->last_ver = -1;
return filter;
}
static MpegTSFilter *mpegts_open_pes_filter(MpegTSContext *ts, unsigned int pid,
PESCallback *pes_cb,
void *opaque)
{
MpegTSFilter *filter;
MpegTSPESFilter *pes;
if (!(filter = mpegts_open_filter(ts, pid, MPEGTS_PES)))
return NULL;
pes = &filter->u.pes_filter;
pes->pes_cb = pes_cb;
pes->opaque = opaque;
return filter;
}
static MpegTSFilter *mpegts_open_pcr_filter(MpegTSContext *ts, unsigned int pid)
{
return mpegts_open_filter(ts, pid, MPEGTS_PCR);
}
static void mpegts_close_filter(MpegTSContext *ts, MpegTSFilter *filter)
{
int pid;
pid = filter->pid;
if (filter->type == MPEGTS_SECTION)
av_freep(&filter->u.section_filter.section_buf);
else if (filter->type == MPEGTS_PES) {
PESContext *pes = filter->u.pes_filter.opaque;
av_buffer_unref(&pes->buffer);
/* referenced private data will be freed later in
* avformat_close_input (pes->st->priv_data == pes) */
if (!pes->st || pes->merged_st) {
av_freep(&filter->u.pes_filter.opaque);
}
}
av_free(filter);
ts->pids[pid] = NULL;
}
static int analyze(const uint8_t *buf, int size, int packet_size,
int probe)
{
int stat[TS_MAX_PACKET_SIZE];
int stat_all = 0;
int i;
int best_score = 0;
memset(stat, 0, packet_size * sizeof(*stat));
for (i = 0; i < size - 3; i++) {
if (buf[i] == 0x47) {
int pid = AV_RB16(buf+1) & 0x1FFF;
int asc = buf[i + 3] & 0x30;
if (!probe || pid == 0x1FFF || asc) {
int x = i % packet_size;
stat[x]++;
stat_all++;
if (stat[x] > best_score) {
best_score = stat[x];
}
}
}
}
return best_score - FFMAX(stat_all - 10*best_score, 0)/10;
}
/* autodetect fec presence */
static int get_packet_size(AVFormatContext* s)
{
int score, fec_score, dvhs_score;
int margin;
int ret;
/*init buffer to store stream for probing */
uint8_t buf[PROBE_PACKET_MAX_BUF] = {0};
int buf_size = 0;
int max_iterations = 16;
while (buf_size < PROBE_PACKET_MAX_BUF && max_iterations--) {
ret = avio_read_partial(s->pb, buf + buf_size, PROBE_PACKET_MAX_BUF - buf_size);
if (ret < 0)
return AVERROR_INVALIDDATA;
buf_size += ret;
score = analyze(buf, buf_size, TS_PACKET_SIZE, 0);
dvhs_score = analyze(buf, buf_size, TS_DVHS_PACKET_SIZE, 0);
fec_score = analyze(buf, buf_size, TS_FEC_PACKET_SIZE, 0);
av_log(s, AV_LOG_TRACE, "Probe: %d, score: %d, dvhs_score: %d, fec_score: %d \n",
buf_size, score, dvhs_score, fec_score);
margin = mid_pred(score, fec_score, dvhs_score);
if (buf_size < PROBE_PACKET_MAX_BUF)
margin += PROBE_PACKET_MARGIN; /*if buffer not filled */
if (score > margin)
return TS_PACKET_SIZE;
else if (dvhs_score > margin)
return TS_DVHS_PACKET_SIZE;
else if (fec_score > margin)
return TS_FEC_PACKET_SIZE;
}
return AVERROR_INVALIDDATA;
}
typedef struct SectionHeader {
uint8_t tid;
uint16_t id;
uint8_t version;
uint8_t current_next;
uint8_t sec_num;
uint8_t last_sec_num;
} SectionHeader;
static int skip_identical(const SectionHeader *h, MpegTSSectionFilter *tssf)
{
if (h->version == tssf->last_ver && tssf->last_crc == tssf->crc)
return 1;
tssf->last_ver = h->version;
tssf->last_crc = tssf->crc;
return 0;
}
static inline int get8(const uint8_t **pp, const uint8_t *p_end)
{
const uint8_t *p;
int c;
p = *pp;
if (p >= p_end)
return AVERROR_INVALIDDATA;
c = *p++;
*pp = p;
return c;
}
static inline int get16(const uint8_t **pp, const uint8_t *p_end)
{
const uint8_t *p;
int c;
p = *pp;
if (1 >= p_end - p)
return AVERROR_INVALIDDATA;
c = AV_RB16(p);
p += 2;
*pp = p;
return c;
}
/* read and allocate a DVB string preceded by its length */
static char *getstr8(const uint8_t **pp, const uint8_t *p_end)
{
int len;
const uint8_t *p;
char *str;
p = *pp;
len = get8(&p, p_end);
if (len < 0)
return NULL;
if (len > p_end - p)
return NULL;
#if CONFIG_ICONV
if (len) {
const char *encodings[] = {
"ISO6937", "ISO-8859-5", "ISO-8859-6", "ISO-8859-7",
"ISO-8859-8", "ISO-8859-9", "ISO-8859-10", "ISO-8859-11",
"", "ISO-8859-13", "ISO-8859-14", "ISO-8859-15", "", "", "", "",
"", "UCS-2BE", "KSC_5601", "GB2312", "UCS-2BE", "UTF-8", "", "",
"", "", "", "", "", "", "", ""
};
iconv_t cd;
char *in, *out;
size_t inlen = len, outlen = inlen * 6 + 1;
if (len >= 3 && p[0] == 0x10 && !p[1] && p[2] && p[2] <= 0xf && p[2] != 0xc) {
char iso8859[12];
snprintf(iso8859, sizeof(iso8859), "ISO-8859-%d", p[2]);
inlen -= 3;
in = (char *)p + 3;
cd = iconv_open("UTF-8", iso8859);
} else if (p[0] < 0x20) {
inlen -= 1;
in = (char *)p + 1;
cd = iconv_open("UTF-8", encodings[*p]);
} else {
in = (char *)p;
cd = iconv_open("UTF-8", encodings[0]);
}
if (cd == (iconv_t)-1)
goto no_iconv;
str = out = av_malloc(outlen);
if (!str) {
iconv_close(cd);
return NULL;
}
if (iconv(cd, &in, &inlen, &out, &outlen) == -1) {
iconv_close(cd);
av_freep(&str);
goto no_iconv;
}
iconv_close(cd);
*out = 0;
*pp = p + len;
return str;
}
no_iconv:
#endif
str = av_malloc(len + 1);
if (!str)
return NULL;
memcpy(str, p, len);
str[len] = '\0';
p += len;
*pp = p;
return str;
}
static int parse_section_header(SectionHeader *h,
const uint8_t **pp, const uint8_t *p_end)
{
int val;
val = get8(pp, p_end);
if (val < 0)
return val;
h->tid = val;
*pp += 2;
val = get16(pp, p_end);
if (val < 0)
return val;
h->id = val;
val = get8(pp, p_end);
if (val < 0)
return val;
h->version = (val >> 1) & 0x1f;
h->current_next = val & 0x01;
val = get8(pp, p_end);
if (val < 0)
return val;
h->sec_num = val;
val = get8(pp, p_end);
if (val < 0)
return val;
h->last_sec_num = val;
return 0;
}
typedef struct StreamType {
uint32_t stream_type;
enum AVMediaType codec_type;
enum AVCodecID codec_id;
} StreamType;
static const StreamType ISO_types[] = {
{ 0x01, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_MPEG2VIDEO },
{ 0x02, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_MPEG2VIDEO },
{ 0x03, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_MP3 },
{ 0x04, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_MP3 },
{ 0x0f, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_AAC },
{ 0x10, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_MPEG4 },
/* Makito encoder sets stream type 0x11 for AAC,
* so auto-detect LOAS/LATM instead of hardcoding it. */
#if !CONFIG_LOAS_DEMUXER
{ 0x11, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_AAC_LATM }, /* LATM syntax */
#endif
{ 0x1b, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_H264 },
{ 0x1c, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_AAC },
{ 0x20, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_H264 },
{ 0x21, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_JPEG2000 },
{ 0x24, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_HEVC },
{ 0x33, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_VVC },
{ 0x42, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_CAVS },
{ 0xd1, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_DIRAC },
2019-09-18 02:18:13 +02:00
{ 0xd2, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_AVS2 },
{ 0xd4, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_AVS3 },
{ 0xea, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_VC1 },
{ 0 },
};
static const StreamType HDMV_types[] = {
{ 0x80, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_PCM_BLURAY },
{ 0x81, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_AC3 },
{ 0x82, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_DTS },
{ 0x83, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_TRUEHD },
{ 0x84, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_EAC3 },
{ 0x85, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_DTS }, /* DTS HD */
{ 0x86, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_DTS }, /* DTS HD MASTER*/
{ 0xa1, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_EAC3 }, /* E-AC3 Secondary Audio */
{ 0xa2, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_DTS }, /* DTS Express Secondary Audio */
{ 0x90, AVMEDIA_TYPE_SUBTITLE, AV_CODEC_ID_HDMV_PGS_SUBTITLE },
{ 0x92, AVMEDIA_TYPE_SUBTITLE, AV_CODEC_ID_HDMV_TEXT_SUBTITLE },
{ 0 },
};
/* SCTE types */
static const StreamType SCTE_types[] = {
{ 0x86, AVMEDIA_TYPE_DATA, AV_CODEC_ID_SCTE_35 },
{ 0 },
};
/* ATSC ? */
static const StreamType MISC_types[] = {
{ 0x81, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_AC3 },
{ 0x8a, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_DTS },
{ 0 },
};
/* HLS Sample Encryption Types */
static const StreamType HLS_SAMPLE_ENC_types[] = {
{ 0xdb, AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_H264},
{ 0xcf, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_AAC },
{ 0xc1, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_AC3 },
{ 0xc2, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_EAC3},
{ 0 },
};
static const StreamType REGD_types[] = {
{ MKTAG('d', 'r', 'a', 'c'), AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_DIRAC },
{ MKTAG('A', 'C', '-', '3'), AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_AC3 },
2023-06-18 13:39:42 +02:00
{ MKTAG('A', 'C', '-', '4'), AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_AC4 },
{ MKTAG('B', 'S', 'S', 'D'), AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_S302M },
{ MKTAG('D', 'T', 'S', '1'), AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_DTS },
{ MKTAG('D', 'T', 'S', '2'), AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_DTS },
{ MKTAG('D', 'T', 'S', '3'), AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_DTS },
{ MKTAG('E', 'A', 'C', '3'), AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_EAC3 },
{ MKTAG('H', 'E', 'V', 'C'), AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_HEVC },
{ MKTAG('V', 'V', 'C', ' '), AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_VVC },
{ MKTAG('K', 'L', 'V', 'A'), AVMEDIA_TYPE_DATA, AV_CODEC_ID_SMPTE_KLV },
{ MKTAG('V', 'A', 'N', 'C'), AVMEDIA_TYPE_DATA, AV_CODEC_ID_SMPTE_2038 },
{ MKTAG('I', 'D', '3', ' '), AVMEDIA_TYPE_DATA, AV_CODEC_ID_TIMED_ID3 },
{ MKTAG('V', 'C', '-', '1'), AVMEDIA_TYPE_VIDEO, AV_CODEC_ID_VC1 },
{ MKTAG('O', 'p', 'u', 's'), AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_OPUS },
{ 0 },
};
static const StreamType METADATA_types[] = {
{ MKTAG('K','L','V','A'), AVMEDIA_TYPE_DATA, AV_CODEC_ID_SMPTE_KLV },
{ MKTAG('I','D','3',' '), AVMEDIA_TYPE_DATA, AV_CODEC_ID_TIMED_ID3 },
{ 0 },
};
/* descriptor present */
static const StreamType DESC_types[] = {
{ 0x6a, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_AC3 }, /* AC-3 descriptor */
{ 0x7a, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_EAC3 }, /* E-AC-3 descriptor */
{ 0x7b, AVMEDIA_TYPE_AUDIO, AV_CODEC_ID_DTS },
{ 0x56, AVMEDIA_TYPE_SUBTITLE, AV_CODEC_ID_DVB_TELETEXT },
{ 0x59, AVMEDIA_TYPE_SUBTITLE, AV_CODEC_ID_DVB_SUBTITLE }, /* subtitling descriptor */
{ 0 },
};
static void mpegts_find_stream_type(AVStream *st,
uint32_t stream_type,
const StreamType *types)
{
FFStream *const sti = ffstream(st);
for (; types->stream_type; types++)
if (stream_type == types->stream_type) {
if (st->codecpar->codec_type != types->codec_type ||
st->codecpar->codec_id != types->codec_id) {
st->codecpar->codec_type = types->codec_type;
st->codecpar->codec_id = types->codec_id;
sti->need_context_update = 1;
}
sti->request_probe = 0;
return;
}
}
static int mpegts_set_stream_info(AVStream *st, PESContext *pes,
uint32_t stream_type, uint32_t prog_reg_desc)
{
FFStream *const sti = ffstream(st);
int old_codec_type = st->codecpar->codec_type;
int old_codec_id = st->codecpar->codec_id;
int old_codec_tag = st->codecpar->codec_tag;
avpriv_set_pts_info(st, 33, 1, 90000);
st->priv_data = pes;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
st->codecpar->codec_type = AVMEDIA_TYPE_DATA;
st->codecpar->codec_id = AV_CODEC_ID_NONE;
sti->need_parsing = AVSTREAM_PARSE_FULL;
pes->st = st;
pes->stream_type = stream_type;
av_log(pes->stream, AV_LOG_DEBUG,
"stream=%d stream_type=%x pid=%x prog_reg_desc=%.4s\n",
st->index, pes->stream_type, pes->pid, (char *)&prog_reg_desc);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
st->codecpar->codec_tag = pes->stream_type;
mpegts_find_stream_type(st, pes->stream_type, ISO_types);
if (pes->stream_type == 4 || pes->stream_type == 0x0f)
sti->request_probe = 50;
if ((prog_reg_desc == AV_RL32("HDMV") ||
prog_reg_desc == AV_RL32("HDPR")) &&
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
st->codecpar->codec_id == AV_CODEC_ID_NONE) {
mpegts_find_stream_type(st, pes->stream_type, HDMV_types);
if (pes->stream_type == 0x83) {
// HDMV TrueHD streams also contain an AC3 coded version of the
// audio track - add a second stream for this
AVStream *sub_st;
// priv_data cannot be shared between streams
PESContext *sub_pes = av_memdup(pes, sizeof(*sub_pes));
if (!sub_pes)
return AVERROR(ENOMEM);
sub_st = avformat_new_stream(pes->stream, NULL);
if (!sub_st) {
av_free(sub_pes);
return AVERROR(ENOMEM);
}
sub_st->id = pes->pid;
avpriv_set_pts_info(sub_st, 33, 1, 90000);
sub_st->priv_data = sub_pes;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
sub_st->codecpar->codec_type = AVMEDIA_TYPE_AUDIO;
sub_st->codecpar->codec_id = AV_CODEC_ID_AC3;
ffstream(sub_st)->need_parsing = AVSTREAM_PARSE_FULL;
sub_pes->sub_st = pes->sub_st = sub_st;
}
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (st->codecpar->codec_id == AV_CODEC_ID_NONE)
mpegts_find_stream_type(st, pes->stream_type, MISC_types);
if (st->codecpar->codec_id == AV_CODEC_ID_NONE)
mpegts_find_stream_type(st, pes->stream_type, HLS_SAMPLE_ENC_types);
if (st->codecpar->codec_id == AV_CODEC_ID_NONE) {
st->codecpar->codec_id = old_codec_id;
st->codecpar->codec_type = old_codec_type;
}
if ((st->codecpar->codec_id == AV_CODEC_ID_NONE ||
(sti->request_probe > 0 && sti->request_probe < AVPROBE_SCORE_STREAM_RETRY / 5)) &&
sti->probe_packets > 0 &&
stream_type == STREAM_TYPE_PRIVATE_DATA) {
st->codecpar->codec_type = AVMEDIA_TYPE_DATA;
st->codecpar->codec_id = AV_CODEC_ID_BIN_DATA;
sti->request_probe = AVPROBE_SCORE_STREAM_RETRY / 5;
}
/* queue a context update if properties changed */
if (old_codec_type != st->codecpar->codec_type ||
old_codec_id != st->codecpar->codec_id ||
old_codec_tag != st->codecpar->codec_tag)
sti->need_context_update = 1;
return 0;
}
static void reset_pes_packet_state(PESContext *pes)
{
pes->pts = AV_NOPTS_VALUE;
pes->dts = AV_NOPTS_VALUE;
pes->data_index = 0;
pes->flags = 0;
av_buffer_unref(&pes->buffer);
}
static void new_data_packet(const uint8_t *buffer, int len, AVPacket *pkt)
{
av_packet_unref(pkt);
pkt->data = (uint8_t *)buffer;
pkt->size = len;
}
static int new_pes_packet(PESContext *pes, AVPacket *pkt)
{
uint8_t *sd;
av_packet_unref(pkt);
pkt->buf = pes->buffer;
pkt->data = pes->buffer->data;
pkt->size = pes->data_index;
if (pes->PES_packet_length &&
pes->pes_header_size + pes->data_index != pes->PES_packet_length +
PES_START_SIZE) {
av_log(pes->stream, AV_LOG_WARNING, "PES packet size mismatch\n");
pes->flags |= AV_PKT_FLAG_CORRUPT;
}
memset(pkt->data + pkt->size, 0, AV_INPUT_BUFFER_PADDING_SIZE);
// Separate out the AC3 substream from an HDMV combined TrueHD/AC3 PID
if (pes->sub_st && pes->stream_type == 0x83 && pes->extended_stream_id == 0x76)
pkt->stream_index = pes->sub_st->index;
else
pkt->stream_index = pes->st->index;
pkt->pts = pes->pts;
pkt->dts = pes->dts;
/* store position of first TS packet of this PES packet */
pkt->pos = pes->ts_packet_pos;
pkt->flags = pes->flags;
pes->buffer = NULL;
reset_pes_packet_state(pes);
sd = av_packet_new_side_data(pkt, AV_PKT_DATA_MPEGTS_STREAM_ID, 1);
if (!sd)
return AVERROR(ENOMEM);
*sd = pes->stream_id;
return 0;
}
static uint64_t get_ts64(GetBitContext *gb, int bits)
2011-10-12 00:49:59 +03:00
{
if (get_bits_left(gb) < bits)
return AV_NOPTS_VALUE;
return get_bits64(gb, bits);
2011-10-12 00:49:59 +03:00
}
static int read_sl_header(PESContext *pes, SLConfigDescr *sl,
const uint8_t *buf, int buf_size)
2011-10-12 00:49:59 +03:00
{
GetBitContext gb;
int au_start_flag = 0, au_end_flag = 0, ocr_flag = 0, idle_flag = 0;
int padding_flag = 0, padding_bits = 0, inst_bitrate_flag = 0;
int dts_flag = -1, cts_flag = -1;
int64_t dts = AV_NOPTS_VALUE, cts = AV_NOPTS_VALUE;
Merge commit '059a934806d61f7af9ab3fd9f74994b838ea5eba' * commit '059a934806d61f7af9ab3fd9f74994b838ea5eba': lavc: Consistently prefix input buffer defines Conflicts: doc/examples/decoding_encoding.c libavcodec/4xm.c libavcodec/aac_adtstoasc_bsf.c libavcodec/aacdec.c libavcodec/aacenc.c libavcodec/ac3dec.h libavcodec/asvenc.c libavcodec/avcodec.h libavcodec/avpacket.c libavcodec/dvdec.c libavcodec/ffv1enc.c libavcodec/g2meet.c libavcodec/gif.c libavcodec/h264.c libavcodec/h264_mp4toannexb_bsf.c libavcodec/huffyuvdec.c libavcodec/huffyuvenc.c libavcodec/jpeglsenc.c libavcodec/libxvid.c libavcodec/mdec.c libavcodec/motionpixels.c libavcodec/mpeg4videodec.c libavcodec/mpegvideo.c libavcodec/noise_bsf.c libavcodec/nuv.c libavcodec/nvenc.c libavcodec/options.c libavcodec/parser.c libavcodec/pngenc.c libavcodec/proresenc_kostya.c libavcodec/qsvdec.c libavcodec/svq1enc.c libavcodec/tiffenc.c libavcodec/truemotion2.c libavcodec/utils.c libavcodec/utvideoenc.c libavcodec/vc1dec.c libavcodec/wmalosslessdec.c libavformat/adxdec.c libavformat/aiffdec.c libavformat/apc.c libavformat/apetag.c libavformat/avidec.c libavformat/bink.c libavformat/cafdec.c libavformat/flvdec.c libavformat/id3v2.c libavformat/isom.c libavformat/matroskadec.c libavformat/mov.c libavformat/mpc.c libavformat/mpc8.c libavformat/mpegts.c libavformat/mvi.c libavformat/mxfdec.c libavformat/mxg.c libavformat/nutdec.c libavformat/oggdec.c libavformat/oggparsecelt.c libavformat/oggparseflac.c libavformat/oggparseopus.c libavformat/oggparsespeex.c libavformat/omadec.c libavformat/rawdec.c libavformat/riffdec.c libavformat/rl2.c libavformat/rmdec.c libavformat/rtpdec_latm.c libavformat/rtpdec_mpeg4.c libavformat/rtpdec_qdm2.c libavformat/rtpdec_svq3.c libavformat/sierravmd.c libavformat/smacker.c libavformat/smush.c libavformat/spdifenc.c libavformat/takdec.c libavformat/tta.c libavformat/utils.c libavformat/vqf.c libavformat/westwood_vqa.c libavformat/xmv.c libavformat/xwma.c libavformat/yop.c Merged-by: Michael Niedermayer <michael@niedermayer.cc>
2015-07-27 22:53:16 +02:00
uint8_t buf_padded[128 + AV_INPUT_BUFFER_PADDING_SIZE];
int buf_padded_size = FFMIN(buf_size, sizeof(buf_padded) - AV_INPUT_BUFFER_PADDING_SIZE);
memcpy(buf_padded, buf, buf_padded_size);
init_get_bits(&gb, buf_padded, buf_padded_size * 8);
2011-10-12 00:49:59 +03:00
if (sl->use_au_start)
au_start_flag = get_bits1(&gb);
if (sl->use_au_end)
au_end_flag = get_bits1(&gb);
if (!sl->use_au_start && !sl->use_au_end)
au_start_flag = au_end_flag = 1;
if (sl->ocr_len > 0)
ocr_flag = get_bits1(&gb);
if (sl->use_idle)
idle_flag = get_bits1(&gb);
if (sl->use_padding)
padding_flag = get_bits1(&gb);
if (padding_flag)
padding_bits = get_bits(&gb, 3);
if (!idle_flag && (!padding_flag || padding_bits != 0)) {
if (sl->packet_seq_num_len)
skip_bits_long(&gb, sl->packet_seq_num_len);
if (sl->degr_prior_len)
if (get_bits1(&gb))
skip_bits(&gb, sl->degr_prior_len);
if (ocr_flag)
skip_bits_long(&gb, sl->ocr_len);
if (au_start_flag) {
if (sl->use_rand_acc_pt)
get_bits1(&gb);
if (sl->au_seq_num_len > 0)
skip_bits_long(&gb, sl->au_seq_num_len);
if (sl->use_timestamps) {
dts_flag = get_bits1(&gb);
cts_flag = get_bits1(&gb);
}
}
if (sl->inst_bitrate_len)
inst_bitrate_flag = get_bits1(&gb);
if (dts_flag == 1)
dts = get_ts64(&gb, sl->timestamp_len);
2011-10-12 00:49:59 +03:00
if (cts_flag == 1)
cts = get_ts64(&gb, sl->timestamp_len);
2011-10-12 00:49:59 +03:00
if (sl->au_len > 0)
skip_bits_long(&gb, sl->au_len);
if (inst_bitrate_flag)
skip_bits_long(&gb, sl->inst_bitrate_len);
}
if (dts != AV_NOPTS_VALUE)
pes->dts = dts;
if (cts != AV_NOPTS_VALUE)
pes->pts = cts;
if (sl->timestamp_len && sl->timestamp_res)
avpriv_set_pts_info(pes->st, sl->timestamp_len, 1, sl->timestamp_res);
2011-10-12 00:49:59 +03:00
return (get_bits_count(&gb) + 7) >> 3;
}
static AVBufferRef *buffer_pool_get(MpegTSContext *ts, int size)
{
int index = av_log2(size + AV_INPUT_BUFFER_PADDING_SIZE);
if (!ts->pools[index]) {
int pool_size = FFMIN(ts->max_packet_size + AV_INPUT_BUFFER_PADDING_SIZE, 2 << index);
ts->pools[index] = av_buffer_pool_init(pool_size, NULL);
if (!ts->pools[index])
return NULL;
}
return av_buffer_pool_get(ts->pools[index]);
}
/* return non zero if a packet could be constructed */
static int mpegts_push_data(MpegTSFilter *filter,
const uint8_t *buf, int buf_size, int is_start,
int64_t pos)
{
PESContext *pes = filter->u.pes_filter.opaque;
MpegTSContext *ts = pes->ts;
const uint8_t *p;
int ret, len;
if (!ts->pkt)
return 0;
if (is_start) {
if (pes->state == MPEGTS_PAYLOAD && pes->data_index > 0) {
ret = new_pes_packet(pes, ts->pkt);
if (ret < 0)
return ret;
ts->stop_parse = 1;
} else {
reset_pes_packet_state(pes);
}
pes->state = MPEGTS_HEADER;
pes->ts_packet_pos = pos;
}
p = buf;
while (buf_size > 0) {
switch (pes->state) {
case MPEGTS_HEADER:
len = PES_START_SIZE - pes->data_index;
if (len > buf_size)
len = buf_size;
memcpy(pes->header + pes->data_index, p, len);
pes->data_index += len;
p += len;
buf_size -= len;
if (pes->data_index == PES_START_SIZE) {
/* we got all the PES or section header. We can now
* decide */
if (pes->header[0] == 0x00 && pes->header[1] == 0x00 &&
pes->header[2] == 0x01) {
/* it must be an MPEG-2 PES stream */
pes->stream_id = pes->header[3];
av_log(pes->stream, AV_LOG_TRACE, "pid=%x stream_id=%#x\n", pes->pid, pes->stream_id);
if ((pes->st && pes->st->discard == AVDISCARD_ALL &&
(!pes->sub_st ||
pes->sub_st->discard == AVDISCARD_ALL)) ||
pes->stream_id == STREAM_ID_PADDING_STREAM)
goto skip;
/* stream not present in PMT */
if (!pes->st) {
if (ts->skip_changes)
goto skip;
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
if (ts->merge_pmt_versions)
goto skip; /* wait for PMT to merge new stream */
pes->st = avformat_new_stream(ts->stream, NULL);
if (!pes->st)
return AVERROR(ENOMEM);
pes->st->id = pes->pid;
mpegts_set_stream_info(pes->st, pes, 0, 0);
}
pes->PES_packet_length = AV_RB16(pes->header + 4);
/* NOTE: zero length means the PES size is unbounded */
if (pes->stream_id != STREAM_ID_PROGRAM_STREAM_MAP &&
pes->stream_id != STREAM_ID_PRIVATE_STREAM_2 &&
pes->stream_id != STREAM_ID_ECM_STREAM &&
pes->stream_id != STREAM_ID_EMM_STREAM &&
pes->stream_id != STREAM_ID_PROGRAM_STREAM_DIRECTORY &&
pes->stream_id != STREAM_ID_DSMCC_STREAM &&
pes->stream_id != STREAM_ID_TYPE_E_STREAM) {
FFStream *const pes_sti = ffstream(pes->st);
pes->state = MPEGTS_PESHEADER;
if (pes->st->codecpar->codec_id == AV_CODEC_ID_NONE && !pes_sti->request_probe) {
av_log(pes->stream, AV_LOG_TRACE,
"pid=%x stream_type=%x probing\n",
pes->pid,
pes->stream_type);
pes_sti->request_probe = 1;
}
} else {
pes->pes_header_size = 6;
pes->state = MPEGTS_PAYLOAD;
pes->data_index = 0;
}
} else {
/* otherwise, it should be a table */
/* skip packet */
skip:
pes->state = MPEGTS_SKIP;
continue;
}
}
break;
/**********************************************/
/* PES packing parsing */
case MPEGTS_PESHEADER:
len = PES_HEADER_SIZE - pes->data_index;
if (len < 0)
return AVERROR_INVALIDDATA;
if (len > buf_size)
len = buf_size;
memcpy(pes->header + pes->data_index, p, len);
pes->data_index += len;
p += len;
buf_size -= len;
if (pes->data_index == PES_HEADER_SIZE) {
pes->pes_header_size = pes->header[8] + 9;
pes->state = MPEGTS_PESHEADER_FILL;
}
break;
case MPEGTS_PESHEADER_FILL:
len = pes->pes_header_size - pes->data_index;
if (len < 0)
return AVERROR_INVALIDDATA;
if (len > buf_size)
len = buf_size;
memcpy(pes->header + pes->data_index, p, len);
pes->data_index += len;
p += len;
buf_size -= len;
if (pes->data_index == pes->pes_header_size) {
const uint8_t *r;
unsigned int flags, pes_ext, skip;
flags = pes->header[7];
r = pes->header + 9;
pes->pts = AV_NOPTS_VALUE;
pes->dts = AV_NOPTS_VALUE;
if ((flags & 0xc0) == 0x80) {
pes->dts = pes->pts = ff_parse_pes_pts(r);
r += 5;
} else if ((flags & 0xc0) == 0xc0) {
pes->pts = ff_parse_pes_pts(r);
r += 5;
pes->dts = ff_parse_pes_pts(r);
r += 5;
}
pes->extended_stream_id = -1;
if (flags & 0x01) { /* PES extension */
pes_ext = *r++;
/* Skip PES private data, program packet sequence counter and P-STD buffer */
skip = (pes_ext >> 4) & 0xb;
skip += skip & 0x9;
r += skip;
if ((pes_ext & 0x41) == 0x01 &&
(r + 2) <= (pes->header + pes->pes_header_size)) {
/* PES extension 2 */
if ((r[0] & 0x7f) > 0 && (r[1] & 0x80) == 0)
pes->extended_stream_id = r[1];
}
}
/* we got the full header. We parse it and get the payload */
pes->state = MPEGTS_PAYLOAD;
pes->data_index = 0;
if (pes->stream_type == 0x12 && buf_size > 0) {
int sl_header_bytes = read_sl_header(pes, &pes->sl, p,
buf_size);
2011-10-12 00:49:59 +03:00
pes->pes_header_size += sl_header_bytes;
p += sl_header_bytes;
buf_size -= sl_header_bytes;
}
if (pes->stream_type == STREAM_TYPE_METADATA &&
pes->stream_id == STREAM_ID_METADATA_STREAM &&
pes->st->codecpar->codec_id == AV_CODEC_ID_SMPTE_KLV &&
buf_size >= 5) {
/* skip metadata access unit header - see MISB ST 1402 */
pes->pes_header_size += 5;
p += 5;
buf_size -= 5;
}
if ( pes->ts->fix_teletext_pts
&& ( pes->st->codecpar->codec_id == AV_CODEC_ID_DVB_TELETEXT
|| pes->st->codecpar->codec_id == AV_CODEC_ID_DVB_SUBTITLE)
) {
AVProgram *p = NULL;
int pcr_found = 0;
while ((p = av_find_program_from_stream(pes->stream, p, pes->st->index))) {
if (p->pcr_pid != -1 && p->discard != AVDISCARD_ALL) {
MpegTSFilter *f = pes->ts->pids[p->pcr_pid];
if (f) {
AVStream *st = NULL;
if (f->type == MPEGTS_PES) {
PESContext *pcrpes = f->u.pes_filter.opaque;
if (pcrpes)
st = pcrpes->st;
} else if (f->type == MPEGTS_PCR) {
int i;
for (i = 0; i < p->nb_stream_indexes; i++) {
AVStream *pst = pes->stream->streams[p->stream_index[i]];
if (pst->codecpar->codec_type == AVMEDIA_TYPE_VIDEO)
st = pst;
}
}
if (f->last_pcr != -1 && !f->discard) {
// teletext packets do not always have correct timestamps,
// the standard says they should be handled after 40.6 ms at most,
// and the pcr error to this packet should be no more than 100 ms.
// TODO: we should interpolate the PCR, not just use the last one
int64_t pcr = f->last_pcr / 300;
pcr_found = 1;
if (st) {
const FFStream *const sti = ffstream(st);
FFStream *const pes_sti = ffstream(pes->st);
pes_sti->pts_wrap_reference = sti->pts_wrap_reference;
pes_sti->pts_wrap_behavior = sti->pts_wrap_behavior;
}
if (pes->dts == AV_NOPTS_VALUE || pes->dts < pcr) {
pes->pts = pes->dts = pcr;
} else if (pes->st->codecpar->codec_id == AV_CODEC_ID_DVB_TELETEXT &&
pes->dts > pcr + 3654 + 9000) {
pes->pts = pes->dts = pcr + 3654 + 9000;
} else if (pes->st->codecpar->codec_id == AV_CODEC_ID_DVB_SUBTITLE &&
pes->dts > pcr + 10*90000) { //10sec
pes->pts = pes->dts = pcr + 3654 + 9000;
}
break;
}
}
}
}
if (pes->st->codecpar->codec_id == AV_CODEC_ID_DVB_TELETEXT &&
!pcr_found) {
av_log(pes->stream, AV_LOG_VERBOSE,
"Forcing DTS/PTS to be unset for a "
"non-trustworthy PES packet for PID %d as "
"PCR hasn't been received yet.\n",
pes->pid);
pes->dts = pes->pts = AV_NOPTS_VALUE;
}
}
}
break;
case MPEGTS_PAYLOAD:
do {
int max_packet_size = ts->max_packet_size;
if (pes->PES_packet_length && pes->PES_packet_length + PES_START_SIZE > pes->pes_header_size)
max_packet_size = pes->PES_packet_length + PES_START_SIZE - pes->pes_header_size;
if (pes->data_index > 0 &&
pes->data_index + buf_size > max_packet_size) {
ret = new_pes_packet(pes, ts->pkt);
if (ret < 0)
return ret;
pes->PES_packet_length = 0;
max_packet_size = ts->max_packet_size;
ts->stop_parse = 1;
} else if (pes->data_index == 0 &&
buf_size > max_packet_size) {
// pes packet size is < ts size packet and pes data is padded with 0xff
// not sure if this is legal in ts but see issue #2392
buf_size = max_packet_size;
}
if (!pes->buffer) {
pes->buffer = buffer_pool_get(ts, max_packet_size);
if (!pes->buffer)
return AVERROR(ENOMEM);
}
memcpy(pes->buffer->data + pes->data_index, p, buf_size);
pes->data_index += buf_size;
/* emit complete packets with known packet size
* decreases demuxer delay for infrequent packets like subtitles from
* a couple of seconds to milliseconds for properly muxed files. */
if (!ts->stop_parse && pes->PES_packet_length &&
pes->pes_header_size + pes->data_index == pes->PES_packet_length + PES_START_SIZE) {
ts->stop_parse = 1;
ret = new_pes_packet(pes, ts->pkt);
pes->state = MPEGTS_SKIP;
if (ret < 0)
return ret;
}
} while (0);
buf_size = 0;
break;
case MPEGTS_SKIP:
buf_size = 0;
break;
}
}
return 0;
}
static PESContext *add_pes_stream(MpegTSContext *ts, int pid, int pcr_pid)
{
MpegTSFilter *tss;
PESContext *pes;
/* if no pid found, then add a pid context */
pes = av_mallocz(sizeof(PESContext));
if (!pes)
return 0;
pes->ts = ts;
pes->stream = ts->stream;
pes->pid = pid;
pes->pcr_pid = pcr_pid;
pes->state = MPEGTS_SKIP;
pes->pts = AV_NOPTS_VALUE;
pes->dts = AV_NOPTS_VALUE;
tss = mpegts_open_pes_filter(ts, pid, mpegts_push_data, pes);
if (!tss) {
av_free(pes);
return 0;
}
return pes;
}
#define MAX_LEVEL 4
typedef struct MP4DescrParseContext {
AVFormatContext *s;
FFIOContext pb;
Mp4Descr *descr;
Mp4Descr *active_descr;
int descr_count;
int max_descr_count;
int level;
int predefined_SLConfigDescriptor_seen;
} MP4DescrParseContext;
static int init_MP4DescrParseContext(MP4DescrParseContext *d, AVFormatContext *s,
const uint8_t *buf, unsigned size,
Mp4Descr *descr, int max_descr_count)
{
if (size > (1 << 30))
return AVERROR_INVALIDDATA;
ffio_init_read_context(&d->pb, buf, size);
d->s = s;
d->level = 0;
d->descr_count = 0;
d->descr = descr;
d->active_descr = NULL;
d->max_descr_count = max_descr_count;
return 0;
}
static void update_offsets(AVIOContext *pb, int64_t *off, int *len)
{
int64_t new_off = avio_tell(pb);
(*len) -= new_off - *off;
*off = new_off;
}
static int parse_mp4_descr(MP4DescrParseContext *d, int64_t off, int len,
int target_tag);
static int parse_mp4_descr_arr(MP4DescrParseContext *d, int64_t off, int len)
{
while (len > 0) {
int ret = parse_mp4_descr(d, off, len, 0);
if (ret < 0)
return ret;
update_offsets(&d->pb.pub, &off, &len);
}
return 0;
}
static int parse_MP4IODescrTag(MP4DescrParseContext *d, int64_t off, int len)
{
AVIOContext *const pb = &d->pb.pub;
avio_rb16(pb); // ID
avio_r8(pb);
avio_r8(pb);
avio_r8(pb);
avio_r8(pb);
avio_r8(pb);
update_offsets(pb, &off, &len);
return parse_mp4_descr_arr(d, off, len);
}
2011-10-10 22:50:00 +03:00
static int parse_MP4ODescrTag(MP4DescrParseContext *d, int64_t off, int len)
{
int id_flags;
if (len < 2)
return 0;
id_flags = avio_rb16(&d->pb.pub);
if (!(id_flags & 0x0020)) { // URL_Flag
update_offsets(&d->pb.pub, &off, &len);
return parse_mp4_descr_arr(d, off, len); // ES_Descriptor[]
2011-10-10 22:50:00 +03:00
} else {
return 0;
}
}
static int parse_MP4ESDescrTag(MP4DescrParseContext *d, int64_t off, int len)
{
AVIOContext *const pb = &d->pb.pub;
int es_id = 0;
int ret = 0;
if (d->descr_count >= d->max_descr_count)
return AVERROR_INVALIDDATA;
ff_mp4_parse_es_descr(pb, &es_id);
d->active_descr = d->descr + (d->descr_count++);
d->active_descr->es_id = es_id;
update_offsets(pb, &off, &len);
if ((ret = parse_mp4_descr(d, off, len, MP4DecConfigDescrTag)) < 0)
return ret;
update_offsets(pb, &off, &len);
2011-10-12 00:49:59 +03:00
if (len > 0)
ret = parse_mp4_descr(d, off, len, MP4SLDescrTag);
d->active_descr = NULL;
return ret;
}
static int parse_MP4DecConfigDescrTag(MP4DescrParseContext *d, int64_t off,
int len)
{
Mp4Descr *descr = d->active_descr;
if (!descr)
return AVERROR_INVALIDDATA;
d->active_descr->dec_config_descr = av_malloc(len);
if (!descr->dec_config_descr)
return AVERROR(ENOMEM);
descr->dec_config_descr_len = len;
avio_read(&d->pb.pub, descr->dec_config_descr, len);
return 0;
}
2011-10-12 00:49:59 +03:00
static int parse_MP4SLDescrTag(MP4DescrParseContext *d, int64_t off, int len)
{
Mp4Descr *descr = d->active_descr;
AVIOContext *const pb = &d->pb.pub;
2011-10-12 00:49:59 +03:00
int predefined;
if (!descr)
return AVERROR_INVALIDDATA;
2011-10-12 00:49:59 +03:00
#define R8_CHECK_CLIP_MAX(dst, maxv) do { \
descr->sl.dst = avio_r8(pb); \
if (descr->sl.dst > maxv) { \
descr->sl.dst = maxv; \
return AVERROR_INVALIDDATA; \
} \
} while (0)
predefined = avio_r8(pb);
2011-10-12 00:49:59 +03:00
if (!predefined) {
int lengths;
int flags = avio_r8(pb);
descr->sl.use_au_start = !!(flags & 0x80);
descr->sl.use_au_end = !!(flags & 0x40);
descr->sl.use_rand_acc_pt = !!(flags & 0x20);
descr->sl.use_padding = !!(flags & 0x08);
descr->sl.use_timestamps = !!(flags & 0x04);
descr->sl.use_idle = !!(flags & 0x02);
descr->sl.timestamp_res = avio_rb32(pb);
avio_rb32(pb);
R8_CHECK_CLIP_MAX(timestamp_len, 63);
R8_CHECK_CLIP_MAX(ocr_len, 63);
R8_CHECK_CLIP_MAX(au_len, 31);
descr->sl.inst_bitrate_len = avio_r8(pb);
lengths = avio_rb16(pb);
2011-10-12 00:49:59 +03:00
descr->sl.degr_prior_len = lengths >> 12;
descr->sl.au_seq_num_len = (lengths >> 7) & 0x1f;
descr->sl.packet_seq_num_len = (lengths >> 2) & 0x1f;
} else if (!d->predefined_SLConfigDescriptor_seen){
avpriv_report_missing_feature(d->s, "Predefined SLConfigDescriptor");
d->predefined_SLConfigDescriptor_seen = 1;
2011-10-12 00:49:59 +03:00
}
return 0;
}
static int parse_mp4_descr(MP4DescrParseContext *d, int64_t off, int len,
int target_tag)
{
int tag;
AVIOContext *const pb = &d->pb.pub;
int len1 = ff_mp4_read_descr(d->s, pb, &tag);
int ret = 0;
update_offsets(pb, &off, &len);
if (len < 0 || len1 > len || len1 <= 0) {
av_log(d->s, AV_LOG_ERROR,
"Tag %x length violation new length %d bytes remaining %d\n",
tag, len1, len);
return AVERROR_INVALIDDATA;
}
if (d->level++ >= MAX_LEVEL) {
av_log(d->s, AV_LOG_ERROR, "Maximum MP4 descriptor level exceeded\n");
ret = AVERROR_INVALIDDATA;
goto done;
}
if (target_tag && tag != target_tag) {
av_log(d->s, AV_LOG_ERROR, "Found tag %x expected %x\n", tag,
target_tag);
ret = AVERROR_INVALIDDATA;
goto done;
}
switch (tag) {
case MP4IODescrTag:
ret = parse_MP4IODescrTag(d, off, len1);
break;
2011-10-10 22:50:00 +03:00
case MP4ODescrTag:
ret = parse_MP4ODescrTag(d, off, len1);
2011-10-10 22:50:00 +03:00
break;
case MP4ESDescrTag:
ret = parse_MP4ESDescrTag(d, off, len1);
break;
case MP4DecConfigDescrTag:
ret = parse_MP4DecConfigDescrTag(d, off, len1);
break;
2011-10-12 00:49:59 +03:00
case MP4SLDescrTag:
ret = parse_MP4SLDescrTag(d, off, len1);
2011-10-12 00:49:59 +03:00
break;
}
done:
d->level--;
avio_seek(pb, off + len1, SEEK_SET);
return ret;
}
static int mp4_read_iods(AVFormatContext *s, const uint8_t *buf, unsigned size,
Mp4Descr *descr, int *descr_count, int max_descr_count)
{
MP4DescrParseContext d;
int ret;
ret = init_MP4DescrParseContext(&d, s, buf, size, descr, max_descr_count);
if (ret < 0)
return ret;
ret = parse_mp4_descr(&d, avio_tell(&d.pb.pub), size, MP4IODescrTag);
*descr_count = d.descr_count;
return ret;
}
2011-10-10 22:50:00 +03:00
static int mp4_read_od(AVFormatContext *s, const uint8_t *buf, unsigned size,
Mp4Descr *descr, int *descr_count, int max_descr_count)
{
2011-10-10 22:50:00 +03:00
MP4DescrParseContext d;
int ret;
ret = init_MP4DescrParseContext(&d, s, buf, size, descr, max_descr_count);
if (ret < 0)
return ret;
2011-10-10 22:50:00 +03:00
ret = parse_mp4_descr_arr(&d, avio_tell(&d.pb.pub), size);
2011-10-10 22:50:00 +03:00
*descr_count = d.descr_count;
return ret;
2011-10-10 22:50:00 +03:00
}
static void m4sl_cb(MpegTSFilter *filter, const uint8_t *section,
int section_len)
2011-10-10 22:50:00 +03:00
{
2011-10-12 00:49:59 +03:00
MpegTSContext *ts = filter->u.section_filter.opaque;
MpegTSSectionFilter *tssf = &filter->u.section_filter;
2011-10-12 00:49:59 +03:00
SectionHeader h;
const uint8_t *p, *p_end;
2011-10-10 22:50:00 +03:00
int mp4_descr_count = 0;
Mp4Descr mp4_descr[MAX_MP4_DESCR_COUNT] = { { 0 } };
2011-10-10 22:50:00 +03:00
int i, pid;
2011-10-12 00:49:59 +03:00
AVFormatContext *s = ts->stream;
p_end = section + section_len - 4;
p = section;
if (parse_section_header(&h, &p, p_end) < 0)
return;
if (h.tid != M4OD_TID)
return;
if (skip_identical(&h, tssf))
return;
2011-10-10 22:50:00 +03:00
mp4_read_od(s, p, (unsigned) (p_end - p), mp4_descr, &mp4_descr_count,
MAX_MP4_DESCR_COUNT);
2011-10-10 22:50:00 +03:00
for (pid = 0; pid < NB_PID_MAX; pid++) {
if (!ts->pids[pid])
continue;
2011-10-10 22:50:00 +03:00
for (i = 0; i < mp4_descr_count; i++) {
PESContext *pes;
AVStream *st;
FFStream *sti;
FFIOContext pb;
2011-10-10 22:50:00 +03:00
if (ts->pids[pid]->es_id != mp4_descr[i].es_id)
continue;
if (ts->pids[pid]->type != MPEGTS_PES) {
2011-10-10 22:50:00 +03:00
av_log(s, AV_LOG_ERROR, "pid %x is not PES\n", pid);
continue;
}
pes = ts->pids[pid]->u.pes_filter.opaque;
st = pes->st;
if (!st)
2011-10-10 22:50:00 +03:00
continue;
sti = ffstream(st);
2011-10-10 22:50:00 +03:00
2011-10-12 00:49:59 +03:00
pes->sl = mp4_descr[i].sl;
ffio_init_read_context(&pb, mp4_descr[i].dec_config_descr,
mp4_descr[i].dec_config_descr_len);
ff_mp4_read_dec_config_descr(s, st, &pb.pub);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (st->codecpar->codec_id == AV_CODEC_ID_AAC &&
st->codecpar->extradata_size > 0)
sti->need_parsing = 0;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (st->codecpar->codec_id == AV_CODEC_ID_H264 &&
st->codecpar->extradata_size > 0)
sti->need_parsing = 0;
2011-10-10 22:50:00 +03:00
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
st->codecpar->codec_type = avcodec_get_type(st->codecpar->codec_id);
sti->need_context_update = 1;
}
}
2011-10-10 22:50:00 +03:00
for (i = 0; i < mp4_descr_count; i++)
av_free(mp4_descr[i].dec_config_descr);
}
static void scte_data_cb(MpegTSFilter *filter, const uint8_t *section,
int section_len)
{
AVProgram *prg = NULL;
MpegTSContext *ts = filter->u.section_filter.opaque;
int idx = ff_find_stream_index(ts->stream, filter->pid);
if (idx < 0)
return;
/**
* In case we receive an SCTE-35 packet before mpegts context is fully
* initialized.
*/
if (!ts->pkt)
return;
new_data_packet(section, section_len, ts->pkt);
ts->pkt->stream_index = idx;
prg = av_find_program_from_stream(ts->stream, NULL, idx);
if (prg && prg->pcr_pid != -1 && prg->discard != AVDISCARD_ALL) {
MpegTSFilter *f = ts->pids[prg->pcr_pid];
if (f && f->last_pcr != -1)
ts->pkt->pts = ts->pkt->dts = f->last_pcr/300;
}
ts->stop_parse = 1;
}
static const uint8_t opus_coupled_stream_cnt[9] = {
1, 0, 1, 1, 2, 2, 2, 3, 3
};
static const uint8_t opus_stream_cnt[9] = {
1, 1, 1, 2, 2, 3, 4, 4, 5,
};
static const uint8_t opus_channel_map[8][8] = {
{ 0 },
{ 0,1 },
{ 0,2,1 },
{ 0,1,2,3 },
{ 0,4,1,2,3 },
{ 0,4,1,2,3,5 },
{ 0,4,1,2,3,5,6 },
{ 0,6,1,2,3,4,5,7 },
};
int ff_parse_mpeg2_descriptor(AVFormatContext *fc, AVStream *st, int stream_type,
const uint8_t **pp, const uint8_t *desc_list_end,
Mp4Descr *mp4_descr, int mp4_descr_count, int pid,
MpegTSContext *ts)
{
FFStream *const sti = ffstream(st);
const uint8_t *desc_end;
int desc_len, desc_tag, desc_es_id, ext_desc_tag, channels, channel_config_code;
char language[252];
int i;
desc_tag = get8(pp, desc_list_end);
if (desc_tag < 0)
return AVERROR_INVALIDDATA;
desc_len = get8(pp, desc_list_end);
if (desc_len < 0)
return AVERROR_INVALIDDATA;
desc_end = *pp + desc_len;
if (desc_end > desc_list_end)
return AVERROR_INVALIDDATA;
av_log(fc, AV_LOG_TRACE, "tag: 0x%02x len=%d\n", desc_tag, desc_len);
if ((st->codecpar->codec_id == AV_CODEC_ID_NONE || sti->request_probe > 0) &&
stream_type == STREAM_TYPE_PRIVATE_DATA)
mpegts_find_stream_type(st, desc_tag, DESC_types);
switch (desc_tag) {
case VIDEO_STREAM_DESCRIPTOR:
if (get8(pp, desc_end) & 0x1) {
st->disposition |= AV_DISPOSITION_STILL_IMAGE;
}
break;
case SL_DESCRIPTOR:
2011-10-05 04:24:22 +03:00
desc_es_id = get16(pp, desc_end);
if (desc_es_id < 0)
break;
2011-10-10 22:50:00 +03:00
if (ts && ts->pids[pid])
ts->pids[pid]->es_id = desc_es_id;
for (i = 0; i < mp4_descr_count; i++)
if (mp4_descr[i].dec_config_descr_len &&
mp4_descr[i].es_id == desc_es_id) {
FFIOContext pb;
ffio_init_read_context(&pb, mp4_descr[i].dec_config_descr,
mp4_descr[i].dec_config_descr_len);
ff_mp4_read_dec_config_descr(fc, st, &pb.pub);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (st->codecpar->codec_id == AV_CODEC_ID_AAC &&
st->codecpar->extradata_size > 0) {
sti->need_parsing = 0;
sti->need_context_update = 1;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (st->codecpar->codec_id == AV_CODEC_ID_MPEG4SYSTEMS)
mpegts_open_section_filter(ts, pid, m4sl_cb, ts, 1);
}
2011-10-05 04:24:22 +03:00
break;
case FMC_DESCRIPTOR:
if (get16(pp, desc_end) < 0)
break;
if (mp4_descr_count > 0 &&
(st->codecpar->codec_id == AV_CODEC_ID_AAC_LATM ||
(sti->request_probe == 0 && st->codecpar->codec_id == AV_CODEC_ID_NONE) ||
sti->request_probe > 0) &&
mp4_descr->dec_config_descr_len && mp4_descr->es_id == pid) {
FFIOContext pb;
ffio_init_read_context(&pb, mp4_descr->dec_config_descr,
mp4_descr->dec_config_descr_len);
ff_mp4_read_dec_config_descr(fc, st, &pb.pub);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (st->codecpar->codec_id == AV_CODEC_ID_AAC &&
st->codecpar->extradata_size > 0) {
sti->request_probe = sti->need_parsing = 0;
st->codecpar->codec_type = AVMEDIA_TYPE_AUDIO;
sti->need_context_update = 1;
}
}
break;
case 0x56: /* DVB teletext descriptor */
{
uint8_t *extradata = NULL;
int language_count = desc_len / 5, ret;
if (desc_len > 0 && desc_len % 5 != 0)
return AVERROR_INVALIDDATA;
if (language_count > 0) {
/* 4 bytes per language code (3 bytes) with comma or NUL byte should fit language buffer */
av_assert0(language_count <= sizeof(language) / 4);
if (st->codecpar->extradata == NULL) {
ret = ff_alloc_extradata(st->codecpar, language_count * 2);
if (ret < 0)
return ret;
}
if (st->codecpar->extradata_size < language_count * 2)
return AVERROR_INVALIDDATA;
extradata = st->codecpar->extradata;
for (i = 0; i < language_count; i++) {
language[i * 4 + 0] = get8(pp, desc_end);
language[i * 4 + 1] = get8(pp, desc_end);
language[i * 4 + 2] = get8(pp, desc_end);
language[i * 4 + 3] = ',';
memcpy(extradata, *pp, 2);
extradata += 2;
*pp += 2;
}
language[i * 4 - 1] = 0;
av_dict_set(&st->metadata, "language", language, 0);
sti->need_context_update = 1;
}
}
break;
case 0x59: /* subtitling descriptor */
{
/* 8 bytes per DVB subtitle substream data:
* ISO_639_language_code (3 bytes),
* subtitling_type (1 byte),
* composition_page_id (2 bytes),
* ancillary_page_id (2 bytes) */
int language_count = desc_len / 8, ret;
if (desc_len > 0 && desc_len % 8 != 0)
return AVERROR_INVALIDDATA;
if (language_count > 1) {
avpriv_request_sample(fc, "DVB subtitles with multiple languages");
}
if (language_count > 0) {
uint8_t *extradata;
/* 4 bytes per language code (3 bytes) with comma or NUL byte should fit language buffer */
av_assert0(language_count <= sizeof(language) / 4);
if (st->codecpar->extradata == NULL) {
ret = ff_alloc_extradata(st->codecpar, language_count * 5);
if (ret < 0)
return ret;
}
if (st->codecpar->extradata_size < language_count * 5)
return AVERROR_INVALIDDATA;
extradata = st->codecpar->extradata;
for (i = 0; i < language_count; i++) {
language[i * 4 + 0] = get8(pp, desc_end);
language[i * 4 + 1] = get8(pp, desc_end);
language[i * 4 + 2] = get8(pp, desc_end);
language[i * 4 + 3] = ',';
/* hearing impaired subtitles detection using subtitling_type */
switch (*pp[0]) {
case 0x20: /* DVB subtitles (for the hard of hearing) with no monitor aspect ratio criticality */
case 0x21: /* DVB subtitles (for the hard of hearing) for display on 4:3 aspect ratio monitor */
case 0x22: /* DVB subtitles (for the hard of hearing) for display on 16:9 aspect ratio monitor */
case 0x23: /* DVB subtitles (for the hard of hearing) for display on 2.21:1 aspect ratio monitor */
case 0x24: /* DVB subtitles (for the hard of hearing) for display on a high definition monitor */
case 0x25: /* DVB subtitles (for the hard of hearing) with plano-stereoscopic disparity for display on a high definition monitor */
st->disposition |= AV_DISPOSITION_HEARING_IMPAIRED;
break;
}
extradata[4] = get8(pp, desc_end); /* subtitling_type */
memcpy(extradata, *pp, 4); /* composition_page_id and ancillary_page_id */
extradata += 5;
*pp += 4;
}
language[i * 4 - 1] = 0;
av_dict_set(&st->metadata, "language", language, 0);
sti->need_context_update = 1;
}
}
break;
case ISO_639_LANGUAGE_DESCRIPTOR:
for (i = 0; i + 4 <= desc_len; i += 4) {
language[i + 0] = get8(pp, desc_end);
language[i + 1] = get8(pp, desc_end);
language[i + 2] = get8(pp, desc_end);
language[i + 3] = ',';
switch (get8(pp, desc_end)) {
case 0x01:
st->disposition |= AV_DISPOSITION_CLEAN_EFFECTS;
break;
case 0x02:
st->disposition |= AV_DISPOSITION_HEARING_IMPAIRED;
break;
case 0x03:
st->disposition |= AV_DISPOSITION_VISUAL_IMPAIRED;
st->disposition |= AV_DISPOSITION_DESCRIPTIONS;
break;
}
}
if (i && language[0]) {
language[i - 1] = 0;
/* don't overwrite language, as it may already have been set by
* another, more specific descriptor (e.g. supplementary audio) */
av_dict_set(&st->metadata, "language", language, AV_DICT_DONT_OVERWRITE);
}
break;
case REGISTRATION_DESCRIPTOR:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
st->codecpar->codec_tag = bytestream_get_le32(pp);
av_log(fc, AV_LOG_TRACE, "reg_desc=%.4s\n", (char *)&st->codecpar->codec_tag);
if (st->codecpar->codec_id == AV_CODEC_ID_NONE || sti->request_probe > 0) {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
mpegts_find_stream_type(st, st->codecpar->codec_tag, REGD_types);
if (st->codecpar->codec_tag == MKTAG('B', 'S', 'S', 'D'))
sti->request_probe = 50;
}
break;
case 0x52: /* stream identifier descriptor */
sti->stream_identifier = 1 + get8(pp, desc_end);
break;
case METADATA_DESCRIPTOR:
if (get16(pp, desc_end) == 0xFFFF)
*pp += 4;
if (get8(pp, desc_end) == 0xFF) {
st->codecpar->codec_tag = bytestream_get_le32(pp);
if (st->codecpar->codec_id == AV_CODEC_ID_NONE)
mpegts_find_stream_type(st, st->codecpar->codec_tag, METADATA_types);
}
break;
case 0x7f: /* DVB extension descriptor */
ext_desc_tag = get8(pp, desc_end);
if (ext_desc_tag < 0)
return AVERROR_INVALIDDATA;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (st->codecpar->codec_id == AV_CODEC_ID_OPUS &&
ext_desc_tag == 0x80) { /* User defined (provisional Opus) */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (!st->codecpar->extradata) {
st->codecpar->extradata = av_mallocz(sizeof(opus_default_extradata) +
AV_INPUT_BUFFER_PADDING_SIZE);
if (!st->codecpar->extradata)
return AVERROR(ENOMEM);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
st->codecpar->extradata_size = sizeof(opus_default_extradata);
memcpy(st->codecpar->extradata, opus_default_extradata, sizeof(opus_default_extradata));
channel_config_code = get8(pp, desc_end);
if (channel_config_code < 0)
return AVERROR_INVALIDDATA;
if (channel_config_code <= 0x8) {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
st->codecpar->extradata[9] = channels = channel_config_code ? channel_config_code : 2;
AV_WL32(&st->codecpar->extradata[12], 48000);
st->codecpar->extradata[18] = channel_config_code ? (channels > 2) : /* Dual Mono */ 255;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
st->codecpar->extradata[19] = opus_stream_cnt[channel_config_code];
st->codecpar->extradata[20] = opus_coupled_stream_cnt[channel_config_code];
memcpy(&st->codecpar->extradata[21], opus_channel_map[channels - 1], channels);
st->codecpar->extradata_size = st->codecpar->extradata[18] ? 21 + channels : 19;
} else {
avpriv_request_sample(fc, "Opus in MPEG-TS - channel_config_code > 0x8");
}
sti->need_parsing = AVSTREAM_PARSE_FULL;
sti->need_context_update = 1;
}
}
if (ext_desc_tag == 0x06) { /* supplementary audio descriptor */
int flags;
if (desc_len < 1)
return AVERROR_INVALIDDATA;
flags = get8(pp, desc_end);
if ((flags & 0x80) == 0) /* mix_type */
st->disposition |= AV_DISPOSITION_DEPENDENT;
switch ((flags >> 2) & 0x1F) { /* editorial_classification */
case 0x01:
st->disposition |= AV_DISPOSITION_VISUAL_IMPAIRED;
st->disposition |= AV_DISPOSITION_DESCRIPTIONS;
break;
case 0x02:
st->disposition |= AV_DISPOSITION_HEARING_IMPAIRED;
break;
case 0x03:
st->disposition |= AV_DISPOSITION_VISUAL_IMPAIRED;
break;
}
if (flags & 0x01) { /* language_code_present */
if (desc_len < 4)
return AVERROR_INVALIDDATA;
language[0] = get8(pp, desc_end);
language[1] = get8(pp, desc_end);
language[2] = get8(pp, desc_end);
language[3] = 0;
/* This language always has to override a possible
* ISO 639 language descriptor language */
if (language[0])
av_dict_set(&st->metadata, "language", language, 0);
}
}
break;
case 0x6a: /* ac-3_descriptor */
{
int component_type_flag = get8(pp, desc_end) & (1 << 7);
if (component_type_flag) {
int component_type = get8(pp, desc_end);
int service_type_mask = 0x38; // 0b00111000
int service_type = ((component_type & service_type_mask) >> 3);
if (service_type == 0x02 /* 0b010 */) {
st->disposition |= AV_DISPOSITION_DESCRIPTIONS;
av_log(ts ? ts->stream : fc, AV_LOG_DEBUG, "New track disposition for id %u: %u\n", st->id, st->disposition);
}
}
}
break;
case 0x7a: /* enhanced_ac-3_descriptor */
{
int component_type_flag = get8(pp, desc_end) & (1 << 7);
if (component_type_flag) {
int component_type = get8(pp, desc_end);
int service_type_mask = 0x38; // 0b00111000
int service_type = ((component_type & service_type_mask) >> 3);
if (service_type == 0x02 /* 0b010 */) {
st->disposition |= AV_DISPOSITION_DESCRIPTIONS;
av_log(ts ? ts->stream : fc, AV_LOG_DEBUG, "New track disposition for id %u: %u\n", st->id, st->disposition);
}
}
}
break;
case 0xfd: /* ARIB data coding type descriptor */
// STD-B24, fascicle 3, chapter 4 defines private_stream_1
// for captions
if (stream_type == STREAM_TYPE_PRIVATE_DATA) {
// This structure is defined in STD-B10, part 1, listing 5.4 and
// part 2, 6.2.20).
// Listing of data_component_ids is in STD-B10, part 2, Annex J.
// Component tag limits are documented in TR-B14, fascicle 2,
// Vol. 3, Section 2, 4.2.8.1
int actual_component_tag = sti->stream_identifier - 1;
int picked_profile = AV_PROFILE_UNKNOWN;
int data_component_id = get16(pp, desc_end);
if (data_component_id < 0)
return AVERROR_INVALIDDATA;
switch (data_component_id) {
case 0x0008:
// [0x30..0x37] are component tags utilized for
// non-mobile captioning service ("profile A").
if (actual_component_tag >= 0x30 &&
actual_component_tag <= 0x37) {
picked_profile = AV_PROFILE_ARIB_PROFILE_A;
}
break;
case 0x0012:
// component tag 0x87 signifies a mobile/partial reception
// (1seg) captioning service ("profile C").
if (actual_component_tag == 0x87) {
picked_profile = AV_PROFILE_ARIB_PROFILE_C;
}
break;
default:
break;
}
if (picked_profile == AV_PROFILE_UNKNOWN)
break;
st->codecpar->codec_type = AVMEDIA_TYPE_SUBTITLE;
st->codecpar->codec_id = AV_CODEC_ID_ARIB_CAPTION;
if (st->codecpar->profile != picked_profile) {
st->codecpar->profile = picked_profile;
sti->need_context_update = 1;
}
sti->request_probe = 0;
sti->need_parsing = 0;
}
break;
case 0xb0: /* DOVI video stream descriptor */
{
uint32_t buf;
AVDOVIDecoderConfigurationRecord *dovi;
size_t dovi_size;
int dependency_pid;
if (desc_end - *pp < 4) // (8 + 8 + 7 + 6 + 1 + 1 + 1) / 8
return AVERROR_INVALIDDATA;
dovi = av_dovi_alloc(&dovi_size);
if (!dovi)
return AVERROR(ENOMEM);
dovi->dv_version_major = get8(pp, desc_end);
dovi->dv_version_minor = get8(pp, desc_end);
buf = get16(pp, desc_end);
dovi->dv_profile = (buf >> 9) & 0x7f; // 7 bits
dovi->dv_level = (buf >> 3) & 0x3f; // 6 bits
dovi->rpu_present_flag = (buf >> 2) & 0x01; // 1 bit
dovi->el_present_flag = (buf >> 1) & 0x01; // 1 bit
dovi->bl_present_flag = buf & 0x01; // 1 bit
if (!dovi->bl_present_flag && desc_end - *pp >= 2) {
buf = get16(pp, desc_end);
dependency_pid = buf >> 3; // 13 bits
}
if (desc_end - *pp >= 1) { // 8 bits
buf = get8(pp, desc_end);
dovi->dv_bl_signal_compatibility_id = (buf >> 4) & 0x0f; // 4 bits
} else {
// 0 stands for None
// Dolby Vision V1.2.93 profiles and levels
dovi->dv_bl_signal_compatibility_id = 0;
}
if (!av_packet_side_data_add(&st->codecpar->coded_side_data,
&st->codecpar->nb_coded_side_data,
AV_PKT_DATA_DOVI_CONF,
(uint8_t *)dovi, dovi_size, 0)) {
av_free(dovi);
return AVERROR(ENOMEM);
}
av_log(fc, AV_LOG_TRACE, "DOVI, version: %d.%d, profile: %d, level: %d, "
"rpu flag: %d, el flag: %d, bl flag: %d, dependency_pid: %d, compatibility id: %d\n",
dovi->dv_version_major, dovi->dv_version_minor,
dovi->dv_profile, dovi->dv_level,
dovi->rpu_present_flag,
dovi->el_present_flag,
dovi->bl_present_flag,
dependency_pid,
dovi->dv_bl_signal_compatibility_id);
}
break;
default:
break;
}
*pp = desc_end;
return 0;
}
static AVStream *find_matching_stream(MpegTSContext *ts, int pid, unsigned int programid,
int stream_identifier, int pmt_stream_idx, struct Program *p)
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
{
AVFormatContext *s = ts->stream;
AVStream *found = NULL;
if (stream_identifier) { /* match based on "stream identifier descriptor" if present */
for (int i = 0; i < p->nb_streams; i++) {
if (p->streams[i].stream_identifier == stream_identifier)
if (!found || pmt_stream_idx == i) /* fallback to idx based guess if multiple streams have the same identifier */
found = s->streams[p->streams[i].idx];
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
}
} else if (pmt_stream_idx < p->nb_streams) { /* match based on position within the PMT */
found = s->streams[p->streams[pmt_stream_idx].idx];
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
}
if (found) {
av_log(ts->stream, AV_LOG_VERBOSE,
"re-using existing %s stream %d (pid=0x%x) for new pid=0x%x\n",
av_get_media_type_string(found->codecpar->codec_type),
found->index, found->id, pid);
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
}
return found;
}
static int parse_stream_identifier_desc(const uint8_t *p, const uint8_t *p_end)
{
const uint8_t **pp = &p;
const uint8_t *desc_list_end;
const uint8_t *desc_end;
int desc_list_len;
int desc_len, desc_tag;
desc_list_len = get16(pp, p_end);
if (desc_list_len < 0)
return -1;
desc_list_len &= 0xfff;
desc_list_end = p + desc_list_len;
if (desc_list_end > p_end)
return -1;
while (1) {
desc_tag = get8(pp, desc_list_end);
if (desc_tag < 0)
return -1;
desc_len = get8(pp, desc_list_end);
if (desc_len < 0)
return -1;
desc_end = *pp + desc_len;
if (desc_end > desc_list_end)
return -1;
if (desc_tag == 0x52) {
return get8(pp, desc_end);
}
*pp = desc_end;
}
return -1;
}
static int is_pes_stream(int stream_type, uint32_t prog_reg_desc)
{
return !(stream_type == 0x13 ||
(stream_type == 0x86 && prog_reg_desc == AV_RL32("CUEI")) );
}
static void pmt_cb(MpegTSFilter *filter, const uint8_t *section, int section_len)
{
MpegTSContext *ts = filter->u.section_filter.opaque;
MpegTSSectionFilter *tssf = &filter->u.section_filter;
struct Program old_program;
SectionHeader h1, *h = &h1;
PESContext *pes;
AVStream *st;
const uint8_t *p, *p_end, *desc_list_end;
int program_info_length, pcr_pid, pid, stream_type;
int desc_list_len;
uint32_t prog_reg_desc = 0; /* registration descriptor */
int stream_identifier = -1;
struct Program *prg;
int mp4_descr_count = 0;
Mp4Descr mp4_descr[MAX_MP4_DESCR_COUNT] = { { 0 } };
int i;
av_log(ts->stream, AV_LOG_TRACE, "PMT: len %i\n", section_len);
hex_dump_debug(ts->stream, section, section_len);
p_end = section + section_len - 4;
p = section;
if (parse_section_header(h, &p, p_end) < 0)
return;
if (h->tid != PMT_TID)
return;
if (!h->current_next)
return;
if (skip_identical(h, tssf))
return;
av_log(ts->stream, AV_LOG_TRACE, "sid=0x%x sec_num=%d/%d version=%d tid=%d\n",
h->id, h->sec_num, h->last_sec_num, h->version, h->tid);
if (!ts->scan_all_pmts && ts->skip_changes)
return;
prg = get_program(ts, h->id);
if (prg)
old_program = *prg;
else
clear_program(&old_program);
if (ts->skip_unknown_pmt && !prg)
avformat/mpegts: add skip_unknown_pmt option Some filtered mpegts streams may erroneously include PMTs for programs that are not advertised in the PAT. This confuses ffmpeg and most players because multiple audio/video streams are created and it is unclear which ones actually contain data. See for example https://tmm1.s3.amazonaws.com/unknown-pmts.ts In this sample, the PAT advertises exactly one program. But the pid it points to for the program's PMT contains PMTs for other programs as well. This is because the broadcaster decided to re-use the same pid for multiple program PMTs. The hardware that filtered the original multi-program stream into a single-program stream did so by rewriting the PAT to contain only the program that was requested. But since it just passed through the PMT pid referenced in the PAT, multiple PMTs are still present for the other programs. Before: Input #0, mpegts, from 'unknown-pmts.ts': Duration: 00:00:10.11, start: 80741.189700, bitrate: 9655 kb/s Program 4 Stream #0:2[0x41]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt709, progressive), 1280x720 [SAR 1:1 DAR 16:9], Closed Captions, 11063 kb/s, 59.94 fps, 59.94 tbr, 90k tbn, 119.88 tbc Stream #0:3[0x44](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s Stream #0:4[0x45](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, stereo, fltp, 128 kb/s No Program Stream #0:0[0x31]: Video: mpeg2video ([2][0][0][0] / 0x0002), none(tv), 90k tbr, 90k tbn, 90k tbc Stream #0:1[0x34](eng): Audio: ac3 (AC-3 / 0x332D4341), 0 channels, fltp Stream #0:5[0x51]: Video: mpeg2video ([2][0][0][0] / 0x0002), none, 90k tbr, 90k tbn Stream #0:6[0x54](eng): Audio: ac3 (AC-3 / 0x332D4341), 0 channels With skip_unknown_pmt=1: Input #0, mpegts, from 'unknown-pmts.ts': Duration: 00:00:10.11, start: 80741.189700, bitrate: 9655 kb/s Program 4 Stream #0:0[0x41]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt709, progressive), 1280x720 [SAR 1:1 DAR 16:9], Closed Captions, 11063 kb/s, 59.94 fps, 59.94 tbr, 90k tbn, 119.88 tbc Stream #0:1[0x44](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s Stream #0:2[0x45](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, stereo, fltp, 128 kb/s Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-08 21:49:43 +02:00
return;
if (prg && prg->nb_pids && prg->pids[0] != ts->current_pid)
return;
if (!ts->skip_clear)
clear_avprogram(ts, h->id);
clear_program(prg);
add_pid_to_program(prg, ts->current_pid);
2012-03-27 01:51:59 +03:00
pcr_pid = get16(&p, p_end);
if (pcr_pid < 0)
return;
2012-03-27 01:51:59 +03:00
pcr_pid &= 0x1fff;
add_pid_to_program(prg, pcr_pid);
update_av_program_info(ts->stream, h->id, pcr_pid, h->version);
av_log(ts->stream, AV_LOG_TRACE, "pcr_pid=0x%x\n", pcr_pid);
2012-03-27 01:51:59 +03:00
program_info_length = get16(&p, p_end);
if (program_info_length < 0)
return;
2012-03-27 01:51:59 +03:00
program_info_length &= 0xfff;
while (program_info_length >= 2) {
uint8_t tag, len;
tag = get8(&p, p_end);
len = get8(&p, p_end);
av_log(ts->stream, AV_LOG_TRACE, "program tag: 0x%02x len=%d\n", tag, len);
program_info_length -= 2;
if (len > program_info_length)
// something else is broken, exit the program_descriptors_loop
break;
program_info_length -= len;
if (tag == IOD_DESCRIPTOR) {
get8(&p, p_end); // scope
get8(&p, p_end); // label
len -= 2;
mp4_read_iods(ts->stream, p, len, mp4_descr + mp4_descr_count,
&mp4_descr_count, MAX_MP4_DESCR_COUNT);
} else if (tag == REGISTRATION_DESCRIPTOR && len >= 4) {
prog_reg_desc = bytestream_get_le32(&p);
len -= 4;
}
p += len;
}
p += program_info_length;
if (p >= p_end)
goto out;
// stop parsing after pmt, we found header
if (!ts->pkt)
ts->stop_parse = 2;
if (prg)
prg->pmt_found = 1;
for (i = 0; i < MAX_STREAMS_PER_PROGRAM; i++) {
st = 0;
pes = NULL;
stream_type = get8(&p, p_end);
if (stream_type < 0)
break;
2012-03-27 01:51:59 +03:00
pid = get16(&p, p_end);
if (pid < 0)
goto out;
2012-03-27 01:51:59 +03:00
pid &= 0x1fff;
if (pid == ts->current_pid)
goto out;
stream_identifier = parse_stream_identifier_desc(p, p_end) + 1;
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
/* now create stream */
if (ts->pids[pid] && ts->pids[pid]->type == MPEGTS_PES) {
pes = ts->pids[pid]->u.pes_filter.opaque;
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
if (ts->merge_pmt_versions && !pes->st) {
st = find_matching_stream(ts, pid, h->id, stream_identifier, i, &old_program);
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
if (st) {
pes->st = st;
pes->stream_type = stream_type;
pes->merged_st = 1;
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
}
}
if (!pes->st) {
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
pes->st = avformat_new_stream(pes->stream, NULL);
if (!pes->st)
goto out;
pes->st->id = pes->pid;
}
st = pes->st;
} else if (is_pes_stream(stream_type, prog_reg_desc)) {
if (ts->pids[pid])
mpegts_close_filter(ts, ts->pids[pid]); // wrongly added sdt filter probably
pes = add_pes_stream(ts, pid, pcr_pid);
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
if (ts->merge_pmt_versions && pes && !pes->st) {
st = find_matching_stream(ts, pid, h->id, stream_identifier, i, &old_program);
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
if (st) {
pes->st = st;
pes->stream_type = stream_type;
pes->merged_st = 1;
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
}
}
if (pes && !pes->st) {
st = avformat_new_stream(pes->stream, NULL);
if (!st)
goto out;
st->id = pes->pid;
}
} else {
int idx = ff_find_stream_index(ts->stream, pid);
if (idx >= 0) {
st = ts->stream->streams[idx];
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
}
if (ts->merge_pmt_versions && !st) {
st = find_matching_stream(ts, pid, h->id, stream_identifier, i, &old_program);
avformat/mpegts: add merge_pmt_versions option This new optional flag makes it easier to deal with mpegts samples where the PMT is updated and elementary streams move to different PIDs in the middle of playback. Previously, new AVStreams were created per PID, and it was up to the user to figure out which streams had migrated to a new PID (by iterating over the list of AVProgram and making guesses), and switch seamlessly to the new AVStream during playback. Transcoding or remuxing these streams with ffmpeg on the CLI was also quite painful, and the user would need to extract each set of PIDs into a separate file and then stitch them back together. With this new option, the mpegts demuxer will automatically detect PMT changes and feed data from the new PID to the original AVStream that was created for the orignal PID. For mpegts samples with stream_identifier_descriptor available, the unique ID is used to merge PIDs together. If the stream id is not available, the demuxer attempts to map PIDs based on their position within the PMT. With this change, I am able to playback and transcode/remux these two samples which previously caused issues: https://tmm1.s3.amazonaws.com/pmt-version-change.ts https://kuroko.fushizen.eu/videos/pid_switch_sample.ts I also have another longer sample in which the PMT changes repeatedly and ES streams move to different pids three times during playback: https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts Demuxing this sample with the new option shows several new log messages as the PMT changes are handled: [mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8 [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9 [mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98) [mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d [mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9) [mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9 [mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa [mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab [mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7) Signed-off-by: Aman Gupta <aman@tmm1.net>
2018-05-09 01:12:12 +02:00
}
if (!st) {
st = avformat_new_stream(ts->stream, NULL);
if (!st)
goto out;
st->id = pid;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
st->codecpar->codec_type = AVMEDIA_TYPE_DATA;
if (stream_type == 0x86 && prog_reg_desc == AV_RL32("CUEI")) {
mpegts_find_stream_type(st, stream_type, SCTE_types);
mpegts_open_section_filter(ts, pid, scte_data_cb, ts, 1);
}
}
}
if (!st)
goto out;
if (pes && !pes->stream_type)
mpegts_set_stream_info(st, pes, stream_type, prog_reg_desc);
add_pid_to_program(prg, pid);
if (prg) {
prg->streams[i].idx = st->index;
prg->streams[i].stream_identifier = stream_identifier;
prg->nb_streams++;
}
av_program_add_stream_index(ts->stream, h->id, st->index);
2012-03-27 01:51:59 +03:00
desc_list_len = get16(&p, p_end);
if (desc_list_len < 0)
goto out;
2012-03-27 01:51:59 +03:00
desc_list_len &= 0xfff;
desc_list_end = p + desc_list_len;
if (desc_list_end > p_end)
goto out;
for (;;) {
if (ff_parse_mpeg2_descriptor(ts->stream, st, stream_type, &p,
desc_list_end, mp4_descr,
mp4_descr_count, pid, ts) < 0)
break;
if (pes && prog_reg_desc == AV_RL32("HDMV") &&
stream_type == 0x83 && pes->sub_st) {
av_program_add_stream_index(ts->stream, h->id,
pes->sub_st->index);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
pes->sub_st->codecpar->codec_tag = st->codecpar->codec_tag;
}
}
p = desc_list_end;
}
if (!ts->pids[pcr_pid])
mpegts_open_pcr_filter(ts, pcr_pid);
out:
for (i = 0; i < mp4_descr_count; i++)
av_free(mp4_descr[i].dec_config_descr);
}
static void pat_cb(MpegTSFilter *filter, const uint8_t *section, int section_len)
{
MpegTSContext *ts = filter->u.section_filter.opaque;
MpegTSSectionFilter *tssf = &filter->u.section_filter;
SectionHeader h1, *h = &h1;
const uint8_t *p, *p_end;
int sid, pmt_pid;
int nb_prg = 0;
AVProgram *program;
av_log(ts->stream, AV_LOG_TRACE, "PAT:\n");
hex_dump_debug(ts->stream, section, section_len);
p_end = section + section_len - 4;
p = section;
if (parse_section_header(h, &p, p_end) < 0)
return;
if (h->tid != PAT_TID)
return;
if (!h->current_next)
return;
if (ts->skip_changes)
return;
if (skip_identical(h, tssf))
return;
ts->id = h->id;
for (;;) {
sid = get16(&p, p_end);
if (sid < 0)
break;
2012-03-27 01:51:59 +03:00
pmt_pid = get16(&p, p_end);
if (pmt_pid < 0)
break;
2012-03-27 01:51:59 +03:00
pmt_pid &= 0x1fff;
if (pmt_pid == ts->current_pid)
break;
av_log(ts->stream, AV_LOG_TRACE, "sid=0x%x pid=0x%x\n", sid, pmt_pid);
if (sid == 0x0000) {
/* NIT info */
} else {
MpegTSFilter *fil = ts->pids[pmt_pid];
struct Program *prg;
program = av_new_program(ts->stream, sid);
if (program) {
program->program_num = sid;
program->pmt_pid = pmt_pid;
}
if (fil)
if ( fil->type != MPEGTS_SECTION
|| fil->pid != pmt_pid
|| fil->u.section_filter.section_cb != pmt_cb)
mpegts_close_filter(ts, ts->pids[pmt_pid]);
if (!ts->pids[pmt_pid])
mpegts_open_section_filter(ts, pmt_pid, pmt_cb, ts, 1);
prg = add_program(ts, sid);
if (prg) {
unsigned prg_idx = prg - ts->prg;
if (prg->nb_pids && prg->pids[0] != pmt_pid)
clear_program(prg);
add_pid_to_program(prg, pmt_pid);
if (prg_idx > nb_prg)
FFSWAP(struct Program, ts->prg[nb_prg], ts->prg[prg_idx]);
if (prg_idx >= nb_prg)
nb_prg++;
}
}
}
ts->nb_prg = nb_prg;
if (sid < 0) {
int i,j;
for (j=0; j<ts->stream->nb_programs; j++) {
for (i = 0; i < ts->nb_prg; i++)
if (ts->prg[i].id == ts->stream->programs[j]->id)
break;
if (i==ts->nb_prg && !ts->skip_clear)
clear_avprogram(ts, ts->stream->programs[j]->id);
}
}
}
static void eit_cb(MpegTSFilter *filter, const uint8_t *section, int section_len)
{
MpegTSContext *ts = filter->u.section_filter.opaque;
const uint8_t *p, *p_end;
SectionHeader h1, *h = &h1;
/*
* Sometimes we receive EPG packets but SDT table do not have
* eit_pres_following or eit_sched turned on, so we open EPG
* stream directly here.
*/
if (!ts->epg_stream) {
ts->epg_stream = avformat_new_stream(ts->stream, NULL);
if (!ts->epg_stream)
return;
ts->epg_stream->id = EIT_PID;
ts->epg_stream->codecpar->codec_type = AVMEDIA_TYPE_DATA;
ts->epg_stream->codecpar->codec_id = AV_CODEC_ID_EPG;
}
if (ts->epg_stream->discard == AVDISCARD_ALL)
return;
p_end = section + section_len - 4;
p = section;
if (parse_section_header(h, &p, p_end) < 0)
return;
if (h->tid < EIT_TID || h->tid > OEITS_END_TID)
return;
av_log(ts->stream, AV_LOG_TRACE, "EIT: tid received = %.02x\n", h->tid);
/**
* Service_id 0xFFFF is reserved, it indicates that the current EIT table
* is scrambled.
*/
if (h->id == 0xFFFF) {
av_log(ts->stream, AV_LOG_TRACE, "Scrambled EIT table received.\n");
return;
}
/**
* In case we receive an EPG packet before mpegts context is fully
* initialized.
*/
if (!ts->pkt)
return;
new_data_packet(section, section_len, ts->pkt);
ts->pkt->stream_index = ts->epg_stream->index;
ts->stop_parse = 1;
}
static void sdt_cb(MpegTSFilter *filter, const uint8_t *section, int section_len)
{
MpegTSContext *ts = filter->u.section_filter.opaque;
MpegTSSectionFilter *tssf = &filter->u.section_filter;
SectionHeader h1, *h = &h1;
const uint8_t *p, *p_end, *desc_list_end, *desc_end;
int onid, val, sid, desc_list_len, desc_tag, desc_len, service_type;
char *name, *provider_name;
av_log(ts->stream, AV_LOG_TRACE, "SDT:\n");
hex_dump_debug(ts->stream, section, section_len);
p_end = section + section_len - 4;
p = section;
if (parse_section_header(h, &p, p_end) < 0)
return;
if (h->tid != SDT_TID)
return;
if (!h->current_next)
return;
if (ts->skip_changes)
return;
if (skip_identical(h, tssf))
return;
onid = get16(&p, p_end);
if (onid < 0)
return;
val = get8(&p, p_end);
if (val < 0)
return;
for (;;) {
sid = get16(&p, p_end);
if (sid < 0)
break;
val = get8(&p, p_end);
if (val < 0)
break;
2012-03-27 01:51:59 +03:00
desc_list_len = get16(&p, p_end);
if (desc_list_len < 0)
break;
2012-03-27 01:51:59 +03:00
desc_list_len &= 0xfff;
desc_list_end = p + desc_list_len;
if (desc_list_end > p_end)
break;
for (;;) {
desc_tag = get8(&p, desc_list_end);
if (desc_tag < 0)
break;
desc_len = get8(&p, desc_list_end);
desc_end = p + desc_len;
if (desc_len < 0 || desc_end > desc_list_end)
break;
av_log(ts->stream, AV_LOG_TRACE, "tag: 0x%02x len=%d\n",
desc_tag, desc_len);
switch (desc_tag) {
case 0x48:
service_type = get8(&p, desc_end);
if (service_type < 0)
break;
provider_name = getstr8(&p, desc_end);
if (!provider_name)
break;
name = getstr8(&p, desc_end);
if (name) {
AVProgram *program = av_new_program(ts->stream, sid);
if (program) {
av_dict_set(&program->metadata, "service_name", name, 0);
av_dict_set(&program->metadata, "service_provider",
provider_name, 0);
}
}
av_free(name);
av_free(provider_name);
break;
default:
break;
}
p = desc_end;
}
p = desc_list_end;
}
}
static int parse_pcr(int64_t *ppcr_high, int *ppcr_low,
const uint8_t *packet);
/* handle one TS packet */
static int handle_packet(MpegTSContext *ts, const uint8_t *packet, int64_t pos)
{
MpegTSFilter *tss;
int len, pid, cc, expected_cc, cc_ok, afc, is_start, is_discontinuity,
has_adaptation, has_payload;
const uint8_t *p, *p_end;
pid = AV_RB16(packet + 1) & 0x1fff;
is_start = packet[1] & 0x40;
tss = ts->pids[pid];
if (ts->auto_guess && !tss && is_start) {
add_pes_stream(ts, pid, -1);
tss = ts->pids[pid];
}
if (!tss)
return 0;
if (is_start)
tss->discard = discard_pid(ts, pid);
if (tss->discard)
return 0;
ts->current_pid = pid;
afc = (packet[3] >> 4) & 3;
if (afc == 0) /* reserved value */
return 0;
has_adaptation = afc & 2;
has_payload = afc & 1;
is_discontinuity = has_adaptation &&
packet[4] != 0 && /* with length > 0 */
(packet[5] & 0x80); /* and discontinuity indicated */
/* continuity check (currently not used) */
cc = (packet[3] & 0xf);
expected_cc = has_payload ? (tss->last_cc + 1) & 0x0f : tss->last_cc;
cc_ok = pid == 0x1FFF || // null packet PID
is_discontinuity ||
tss->last_cc < 0 ||
expected_cc == cc;
tss->last_cc = cc;
if (!cc_ok) {
av_log(ts->stream, AV_LOG_DEBUG,
"Continuity check failed for pid %d expected %d got %d\n",
pid, expected_cc, cc);
if (tss->type == MPEGTS_PES) {
PESContext *pc = tss->u.pes_filter.opaque;
pc->flags |= AV_PKT_FLAG_CORRUPT;
}
}
if (packet[1] & 0x80) {
av_log(ts->stream, AV_LOG_DEBUG, "Packet had TEI flag set; marking as corrupt\n");
if (tss->type == MPEGTS_PES) {
PESContext *pc = tss->u.pes_filter.opaque;
pc->flags |= AV_PKT_FLAG_CORRUPT;
}
}
p = packet + 4;
if (has_adaptation) {
int64_t pcr_h;
int pcr_l;
if (parse_pcr(&pcr_h, &pcr_l, packet) == 0)
tss->last_pcr = pcr_h * 300 + pcr_l;
/* skip adaptation field */
p += p[0] + 1;
}
/* if past the end of packet, ignore */
p_end = packet + TS_PACKET_SIZE;
if (p >= p_end || !has_payload)
return 0;
if (pos >= 0) {
av_assert0(pos >= TS_PACKET_SIZE);
ts->pos47_full = pos - TS_PACKET_SIZE;
}
if (tss->type == MPEGTS_SECTION) {
if (is_start) {
/* pointer field present */
len = *p++;
if (len > p_end - p)
return 0;
if (len && cc_ok) {
/* write remaining section bytes */
write_section_data(ts, tss,
p, len, 0);
/* check whether filter has been closed */
if (!ts->pids[pid])
return 0;
}
p += len;
if (p < p_end) {
write_section_data(ts, tss,
p, p_end - p, 1);
}
} else {
if (cc_ok) {
write_section_data(ts, tss,
p, p_end - p, 0);
}
}
// stop find_stream_info from waiting for more streams
// when all programs have received a PMT
if (ts->stream->ctx_flags & AVFMTCTX_NOHEADER && ts->scan_all_pmts <= 0) {
int i;
for (i = 0; i < ts->nb_prg; i++) {
if (!ts->prg[i].pmt_found)
break;
}
if (i == ts->nb_prg && ts->nb_prg > 0) {
av_log(ts->stream, AV_LOG_DEBUG, "All programs have pmt, headers found\n");
ts->stream->ctx_flags &= ~AVFMTCTX_NOHEADER;
}
}
} else {
int ret;
// Note: The position here points actually behind the current packet.
if (tss->type == MPEGTS_PES) {
if ((ret = tss->u.pes_filter.pes_cb(tss, p, p_end - p, is_start,
pos - ts->raw_packet_size)) < 0)
return ret;
}
}
return 0;
}
static int mpegts_resync(AVFormatContext *s, int seekback, const uint8_t *current_packet)
{
2014-08-25 13:11:32 +03:00
MpegTSContext *ts = s->priv_data;
AVIOContext *pb = s->pb;
int c, i;
uint64_t pos = avio_tell(pb);
int64_t back = FFMIN(seekback, pos);
//Special case for files like 01c56b0dc1.ts
if (current_packet[0] == 0x80 && current_packet[12] == 0x47 && pos >= TS_PACKET_SIZE) {
avio_seek(pb, 12 - TS_PACKET_SIZE, SEEK_CUR);
return 0;
}
avio_seek(pb, -back, SEEK_CUR);
2014-08-25 13:11:32 +03:00
for (i = 0; i < ts->resync_size; i++) {
c = avio_r8(pb);
if (avio_feof(pb))
return AVERROR_EOF;
if (c == 0x47) {
int new_packet_size, ret;
avio_seek(pb, -1, SEEK_CUR);
pos = avio_tell(pb);
ret = ffio_ensure_seekback(pb, PROBE_PACKET_MAX_BUF);
if (ret < 0)
return ret;
new_packet_size = get_packet_size(s);
if (new_packet_size > 0 && new_packet_size != ts->raw_packet_size) {
av_log(ts->stream, AV_LOG_WARNING, "changing packet size to %d\n", new_packet_size);
ts->raw_packet_size = new_packet_size;
}
avio_seek(pb, pos, SEEK_SET);
return 0;
}
}
av_log(s, AV_LOG_ERROR,
"max resync size reached, could not find sync byte\n");
/* no sync found */
return AVERROR_INVALIDDATA;
}
/* return AVERROR_something if error or EOF. Return 0 if OK. */
static int read_packet(AVFormatContext *s, uint8_t *buf, int raw_packet_size,
const uint8_t **data)
{
AVIOContext *pb = s->pb;
int len;
for (;;) {
len = ffio_read_indirect(pb, buf, TS_PACKET_SIZE, data);
if (len != TS_PACKET_SIZE)
return len < 0 ? len : AVERROR_EOF;
/* check packet sync byte */
if ((*data)[0] != 0x47) {
/* find a new packet start */
if (mpegts_resync(s, raw_packet_size, *data) < 0)
return AVERROR(EAGAIN);
else
continue;
} else {
break;
}
}
return 0;
}
static void finished_reading_packet(AVFormatContext *s, int raw_packet_size)
{
AVIOContext *pb = s->pb;
int skip = raw_packet_size - TS_PACKET_SIZE;
if (skip > 0)
avio_skip(pb, skip);
}
static int handle_packets(MpegTSContext *ts, int64_t nb_packets)
{
AVFormatContext *s = ts->stream;
uint8_t packet[TS_PACKET_SIZE + AV_INPUT_BUFFER_PADDING_SIZE];
const uint8_t *data;
int64_t packet_num;
int ret = 0;
if (avio_tell(s->pb) != ts->last_pos) {
int i;
av_log(ts->stream, AV_LOG_TRACE, "Skipping after seek\n");
/* seek detected, flush pes buffer */
for (i = 0; i < NB_PID_MAX; i++) {
if (ts->pids[i]) {
if (ts->pids[i]->type == MPEGTS_PES) {
PESContext *pes = ts->pids[i]->u.pes_filter.opaque;
av_buffer_unref(&pes->buffer);
pes->data_index = 0;
pes->state = MPEGTS_SKIP; /* skip until pes header */
} else if (ts->pids[i]->type == MPEGTS_SECTION) {
ts->pids[i]->u.section_filter.last_ver = -1;
}
ts->pids[i]->last_cc = -1;
ts->pids[i]->last_pcr = -1;
}
}
}
ts->stop_parse = 0;
packet_num = 0;
memset(packet + TS_PACKET_SIZE, 0, AV_INPUT_BUFFER_PADDING_SIZE);
for (;;) {
packet_num++;
if (nb_packets != 0 && packet_num >= nb_packets ||
ts->stop_parse > 1) {
ret = AVERROR(EAGAIN);
break;
}
if (ts->stop_parse > 0)
break;
ret = read_packet(s, packet, ts->raw_packet_size, &data);
if (ret != 0)
break;
ret = handle_packet(ts, data, avio_tell(s->pb));
finished_reading_packet(s, ts->raw_packet_size);
if (ret != 0)
break;
}
ts->last_pos = avio_tell(s->pb);
return ret;
}
static int mpegts_probe(const AVProbeData *p)
{
const int size = p->buf_size;
int maxscore = 0;
int sumscore = 0;
int i;
int check_count = size / TS_FEC_PACKET_SIZE;
#define CHECK_COUNT 10
#define CHECK_BLOCK 100
if (!check_count)
return 0;
for (i = 0; i<check_count; i+=CHECK_BLOCK) {
int left = FFMIN(check_count - i, CHECK_BLOCK);
int score = analyze(p->buf + TS_PACKET_SIZE *i, TS_PACKET_SIZE *left, TS_PACKET_SIZE , 1);
int dvhs_score = analyze(p->buf + TS_DVHS_PACKET_SIZE*i, TS_DVHS_PACKET_SIZE*left, TS_DVHS_PACKET_SIZE, 1);
int fec_score = analyze(p->buf + TS_FEC_PACKET_SIZE *i, TS_FEC_PACKET_SIZE *left, TS_FEC_PACKET_SIZE , 1);
score = FFMAX3(score, dvhs_score, fec_score);
sumscore += score;
maxscore = FFMAX(maxscore, score);
}
sumscore = sumscore * CHECK_COUNT / check_count;
maxscore = maxscore * CHECK_COUNT / CHECK_BLOCK;
ff_dlog(0, "TS score: %d %d\n", sumscore, maxscore);
if (check_count > CHECK_COUNT && sumscore > 6) {
return AVPROBE_SCORE_MAX + sumscore - CHECK_COUNT;
} else if (check_count >= CHECK_COUNT && sumscore > 6) {
return AVPROBE_SCORE_MAX/2 + sumscore - CHECK_COUNT;
} else if (check_count >= CHECK_COUNT && maxscore > 6) {
return AVPROBE_SCORE_MAX/2 + sumscore - CHECK_COUNT;
} else if (sumscore > 6) {
return 2;
} else {
return 0;
}
}
/* return the 90kHz PCR and the extension for the 27MHz PCR. return
* (-1) if not available */
static int parse_pcr(int64_t *ppcr_high, int *ppcr_low, const uint8_t *packet)
{
int afc, len, flags;
const uint8_t *p;
unsigned int v;
afc = (packet[3] >> 4) & 3;
if (afc <= 1)
return AVERROR_INVALIDDATA;
p = packet + 4;
len = p[0];
p++;
if (len == 0)
return AVERROR_INVALIDDATA;
flags = *p++;
len--;
if (!(flags & 0x10))
return AVERROR_INVALIDDATA;
if (len < 6)
return AVERROR_INVALIDDATA;
v = AV_RB32(p);
*ppcr_high = ((int64_t) v << 1) | (p[4] >> 7);
*ppcr_low = ((p[4] & 1) << 8) | p[5];
return 0;
}
static void seek_back(AVFormatContext *s, AVIOContext *pb, int64_t pos) {
/* NOTE: We attempt to seek on non-seekable files as well, as the
* probe buffer usually is big enough. Only warn if the seek failed
* on files where the seek should work. */
if (avio_seek(pb, pos, SEEK_SET) < 0)
av_log(s, (pb->seekable & AVIO_SEEKABLE_NORMAL) ? AV_LOG_ERROR : AV_LOG_INFO, "Unable to seek back to the start\n");
}
static int mpegts_read_header(AVFormatContext *s)
{
MpegTSContext *ts = s->priv_data;
AVIOContext *pb = s->pb;
int64_t pos, probesize = s->probesize;
int64_t seekback = FFMAX(s->probesize, (int64_t)ts->resync_size + PROBE_PACKET_MAX_BUF);
ffformatcontext(s)->prefer_codec_framerate = 1;
if (ffio_ensure_seekback(pb, seekback) < 0)
av_log(s, AV_LOG_WARNING, "Failed to allocate buffers for seekback\n");
pos = avio_tell(pb);
ts->raw_packet_size = get_packet_size(s);
if (ts->raw_packet_size <= 0) {
av_log(s, AV_LOG_WARNING, "Could not detect TS packet size, defaulting to non-FEC/DVHS\n");
ts->raw_packet_size = TS_PACKET_SIZE;
}
ts->stream = s;
ts->auto_guess = 0;
if (s->iformat == &ff_mpegts_demuxer.p) {
/* normal demux */
2011-10-05 15:12:42 +03:00
/* first do a scan to get all the services */
seek_back(s, pb, pos);
mpegts_open_section_filter(ts, SDT_PID, sdt_cb, ts, 1);
mpegts_open_section_filter(ts, PAT_PID, pat_cb, ts, 1);
mpegts_open_section_filter(ts, EIT_PID, eit_cb, ts, 1);
handle_packets(ts, probesize / ts->raw_packet_size);
/* if could not find service, enable auto_guess */
ts->auto_guess = 1;
av_log(ts->stream, AV_LOG_TRACE, "tuning done\n");
s->ctx_flags |= AVFMTCTX_NOHEADER;
} else {
AVStream *st;
int pcr_pid, pid, nb_packets, nb_pcrs, ret, pcr_l;
int64_t pcrs[2], pcr_h;
uint8_t packet[TS_PACKET_SIZE];
const uint8_t *data;
/* only read packets */
st = avformat_new_stream(s, NULL);
if (!st)
return AVERROR(ENOMEM);
avpriv_set_pts_info(st, 60, 1, 27000000);
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
st->codecpar->codec_type = AVMEDIA_TYPE_DATA;
st->codecpar->codec_id = AV_CODEC_ID_MPEG2TS;
/* we iterate until we find two PCRs to estimate the bitrate */
pcr_pid = -1;
nb_pcrs = 0;
nb_packets = 0;
for (;;) {
ret = read_packet(s, packet, ts->raw_packet_size, &data);
if (ret < 0)
return ret;
pid = AV_RB16(data + 1) & 0x1fff;
if ((pcr_pid == -1 || pcr_pid == pid) &&
parse_pcr(&pcr_h, &pcr_l, data) == 0) {
finished_reading_packet(s, ts->raw_packet_size);
pcr_pid = pid;
pcrs[nb_pcrs] = pcr_h * 300 + pcr_l;
nb_pcrs++;
if (nb_pcrs >= 2) {
if (pcrs[1] - pcrs[0] > 0) {
/* the difference needs to be positive to make sense for bitrate computation */
break;
} else {
av_log(ts->stream, AV_LOG_WARNING, "invalid pcr pair %"PRId64" >= %"PRId64"\n", pcrs[0], pcrs[1]);
pcrs[0] = pcrs[1];
nb_pcrs--;
}
}
} else {
finished_reading_packet(s, ts->raw_packet_size);
}
nb_packets++;
}
/* NOTE1: the bitrate is computed without the FEC */
/* NOTE2: it is only the bitrate of the start of the stream */
ts->pcr_incr = pcrs[1] - pcrs[0];
ts->cur_pcr = pcrs[0] - ts->pcr_incr * (nb_packets - 1);
s->bit_rate = TS_PACKET_SIZE * 8 * 27000000LL / ts->pcr_incr;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
st->codecpar->bit_rate = s->bit_rate;
st->start_time = ts->cur_pcr;
av_log(ts->stream, AV_LOG_TRACE, "start=%0.3f pcr=%0.3f incr=%"PRId64"\n",
st->start_time / 1000000.0, pcrs[0] / 27e6, ts->pcr_incr);
}
seek_back(s, pb, pos);
return 0;
}
#define MAX_PACKET_READAHEAD ((128 * 1024) / 188)
static int mpegts_raw_read_packet(AVFormatContext *s, AVPacket *pkt)
{
MpegTSContext *ts = s->priv_data;
int ret, i;
int64_t pcr_h, next_pcr_h, pos;
int pcr_l, next_pcr_l;
uint8_t pcr_buf[12];
const uint8_t *data;
if ((ret = av_new_packet(pkt, TS_PACKET_SIZE)) < 0)
return ret;
ret = read_packet(s, pkt->data, ts->raw_packet_size, &data);
pkt->pos = avio_tell(s->pb);
if (ret < 0) {
return ret;
}
if (data != pkt->data)
memcpy(pkt->data, data, TS_PACKET_SIZE);
finished_reading_packet(s, ts->raw_packet_size);
if (ts->mpeg2ts_compute_pcr) {
/* compute exact PCR for each packet */
if (parse_pcr(&pcr_h, &pcr_l, pkt->data) == 0) {
/* we read the next PCR (XXX: optimize it by using a bigger buffer */
pos = avio_tell(s->pb);
for (i = 0; i < MAX_PACKET_READAHEAD; i++) {
avio_seek(s->pb, pos + i * ts->raw_packet_size, SEEK_SET);
avio_read(s->pb, pcr_buf, 12);
if (parse_pcr(&next_pcr_h, &next_pcr_l, pcr_buf) == 0) {
/* XXX: not precise enough */
ts->pcr_incr =
((next_pcr_h - pcr_h) * 300 + (next_pcr_l - pcr_l)) /
(i + 1);
break;
}
}
avio_seek(s->pb, pos, SEEK_SET);
/* no next PCR found: we use previous increment */
ts->cur_pcr = pcr_h * 300 + pcr_l;
}
pkt->pts = ts->cur_pcr;
pkt->duration = ts->pcr_incr;
ts->cur_pcr += ts->pcr_incr;
}
pkt->stream_index = 0;
return 0;
}
static int mpegts_read_packet(AVFormatContext *s, AVPacket *pkt)
{
MpegTSContext *ts = s->priv_data;
int ret, i;
pkt->size = -1;
ts->pkt = pkt;
ret = handle_packets(ts, 0);
if (ret < 0) {
av_packet_unref(ts->pkt);
/* flush pes data left */
for (i = 0; i < NB_PID_MAX; i++)
if (ts->pids[i] && ts->pids[i]->type == MPEGTS_PES) {
PESContext *pes = ts->pids[i]->u.pes_filter.opaque;
if (pes->state == MPEGTS_PAYLOAD && pes->data_index > 0) {
ret = new_pes_packet(pes, pkt);
if (ret < 0)
return ret;
pes->state = MPEGTS_SKIP;
ret = 0;
break;
}
}
}
if (!ret && pkt->size < 0)
ret = AVERROR_INVALIDDATA;
return ret;
}
static void mpegts_free(MpegTSContext *ts)
{
int i;
clear_programs(ts);
for (i = 0; i < FF_ARRAY_ELEMS(ts->pools); i++)
av_buffer_pool_uninit(&ts->pools[i]);
for (i = 0; i < NB_PID_MAX; i++)
if (ts->pids[i])
mpegts_close_filter(ts, ts->pids[i]);
}
static int mpegts_read_close(AVFormatContext *s)
{
MpegTSContext *ts = s->priv_data;
mpegts_free(ts);
return 0;
}
static av_unused int64_t mpegts_get_pcr(AVFormatContext *s, int stream_index,
int64_t *ppos, int64_t pos_limit)
{
MpegTSContext *ts = s->priv_data;
int64_t pos, timestamp;
uint8_t buf[TS_PACKET_SIZE];
int pcr_l, pcr_pid =
((PESContext *)s->streams[stream_index]->priv_data)->pcr_pid;
int pos47 = ts->pos47_full % ts->raw_packet_size;
pos =
((*ppos + ts->raw_packet_size - 1 - pos47) / ts->raw_packet_size) *
ts->raw_packet_size + pos47;
2008-08-27 21:08:20 +03:00
while(pos < pos_limit) {
if (avio_seek(s->pb, pos, SEEK_SET) < 0)
return AV_NOPTS_VALUE;
if (avio_read(s->pb, buf, TS_PACKET_SIZE) != TS_PACKET_SIZE)
return AV_NOPTS_VALUE;
if (buf[0] != 0x47) {
if (mpegts_resync(s, TS_PACKET_SIZE, buf) < 0)
return AV_NOPTS_VALUE;
pos = avio_tell(s->pb);
continue;
}
2008-08-27 21:08:20 +03:00
if ((pcr_pid < 0 || (AV_RB16(buf + 1) & 0x1fff) == pcr_pid) &&
parse_pcr(&timestamp, &pcr_l, buf) == 0) {
*ppos = pos;
return timestamp;
}
2008-08-27 21:08:20 +03:00
pos += ts->raw_packet_size;
}
return AV_NOPTS_VALUE;
}
static int64_t mpegts_get_dts(AVFormatContext *s, int stream_index,
int64_t *ppos, int64_t pos_limit)
{
MpegTSContext *ts = s->priv_data;
AVPacket *pkt;
int64_t pos;
int pos47 = ts->pos47_full % ts->raw_packet_size;
pos = ((*ppos + ts->raw_packet_size - 1 - pos47) / ts->raw_packet_size) * ts->raw_packet_size + pos47;
ff_read_frame_flush(s);
if (avio_seek(s->pb, pos, SEEK_SET) < 0)
return AV_NOPTS_VALUE;
pkt = av_packet_alloc();
if (!pkt)
return AV_NOPTS_VALUE;
while(pos < pos_limit) {
int ret = av_read_frame(s, pkt);
if (ret < 0) {
av_packet_free(&pkt);
return AV_NOPTS_VALUE;
}
if (pkt->dts != AV_NOPTS_VALUE && pkt->pos >= 0) {
ff_reduce_index(s, pkt->stream_index);
av_add_index_entry(s->streams[pkt->stream_index], pkt->pos, pkt->dts, 0, 0, AVINDEX_KEYFRAME /* FIXME keyframe? */);
if (pkt->stream_index == stream_index && pkt->pos >= *ppos) {
int64_t dts = pkt->dts;
*ppos = pkt->pos;
av_packet_free(&pkt);
2015-10-27 16:42:59 +02:00
return dts;
}
}
pos = pkt->pos;
av_packet_unref(pkt);
}
av_packet_free(&pkt);
return AV_NOPTS_VALUE;
}
/**************************************************************/
/* parsing functions - called from other demuxers such as RTP */
MpegTSContext *avpriv_mpegts_parse_open(AVFormatContext *s)
{
MpegTSContext *ts;
ts = av_mallocz(sizeof(MpegTSContext));
if (!ts)
return NULL;
/* no stream case, currently used by RTP */
ts->raw_packet_size = TS_PACKET_SIZE;
ts->max_packet_size = 2048000;
ts->stream = s;
ts->auto_guess = 1;
mpegts_open_section_filter(ts, SDT_PID, sdt_cb, ts, 1);
mpegts_open_section_filter(ts, PAT_PID, pat_cb, ts, 1);
mpegts_open_section_filter(ts, EIT_PID, eit_cb, ts, 1);
return ts;
}
/* return the consumed length if a packet was output, or -1 if no
* packet is output */
int avpriv_mpegts_parse_packet(MpegTSContext *ts, AVPacket *pkt,
const uint8_t *buf, int len)
{
int len1;
len1 = len;
ts->pkt = pkt;
for (;;) {
ts->stop_parse = 0;
if (len < TS_PACKET_SIZE)
return AVERROR_INVALIDDATA;
if (buf[0] != 0x47) {
buf++;
len--;
} else {
handle_packet(ts, buf, len1 - len + TS_PACKET_SIZE);
buf += TS_PACKET_SIZE;
len -= TS_PACKET_SIZE;
if (ts->stop_parse == 1)
break;
}
}
return len1 - len;
}
void avpriv_mpegts_parse_close(MpegTSContext *ts)
{
mpegts_free(ts);
av_free(ts);
}
const FFInputFormat ff_mpegts_demuxer = {
.p.name = "mpegts",
.p.long_name = NULL_IF_CONFIG_SMALL("MPEG-TS (MPEG-2 Transport Stream)"),
.p.flags = AVFMT_SHOW_IDS | AVFMT_TS_DISCONT,
.p.priv_class = &mpegts_class,
.priv_data_size = sizeof(MpegTSContext),
.read_probe = mpegts_probe,
.read_header = mpegts_read_header,
.read_packet = mpegts_read_packet,
.read_close = mpegts_read_close,
.read_timestamp = mpegts_get_dts,
};
const FFInputFormat ff_mpegtsraw_demuxer = {
.p.name = "mpegtsraw",
.p.long_name = NULL_IF_CONFIG_SMALL("raw MPEG-TS (MPEG-2 Transport Stream)"),
.p.flags = AVFMT_SHOW_IDS | AVFMT_TS_DISCONT,
.p.priv_class = &mpegtsraw_class,
.priv_data_size = sizeof(MpegTSContext),
.read_header = mpegts_read_header,
.read_packet = mpegts_raw_read_packet,
.read_close = mpegts_read_close,
.read_timestamp = mpegts_get_dts,
};