1
0
mirror of https://github.com/FFmpeg/FFmpeg.git synced 2024-11-26 19:01:44 +02:00
FFmpeg/libavformat/mux.c

1399 lines
45 KiB
C
Raw Normal View History

/*
* muxing functions for use within FFmpeg
* Copyright (c) 2000, 2001, 2002 Fabrice Bellard
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "avformat.h"
#include "internal.h"
#include "libavcodec/internal.h"
#include "libavutil/opt.h"
#include "libavutil/dict.h"
#include "libavutil/pixdesc.h"
#include "libavutil/timestamp.h"
#include "libavutil/avassert.h"
#include "libavutil/avstring.h"
#include "libavutil/internal.h"
#include "libavutil/mathematics.h"
/**
* @file
* muxing functions for use within libavformat
*/
/* fraction handling */
/**
* f = val + (num / den) + 0.5.
*
* 'num' is normalized so that it is such as 0 <= num < den.
*
* @param f fractional number
* @param val integer value
* @param num must be >= 0
* @param den must be >= 1
*/
static void frac_init(FFFrac *f, int64_t val, int64_t num, int64_t den)
{
num += (den >> 1);
if (num >= den) {
val += num / den;
num = num % den;
}
f->val = val;
f->num = num;
f->den = den;
}
/**
* Fractional addition to f: f = f + (incr / f->den).
*
* @param f fractional number
* @param incr increment, can be positive or negative
*/
static void frac_add(FFFrac *f, int64_t incr)
{
int64_t num, den;
num = f->num + incr;
den = f->den;
if (num < 0) {
f->val += num / den;
num = num % den;
if (num < 0) {
num += den;
f->val--;
}
} else if (num >= den) {
f->val += num / den;
num = num % den;
}
f->num = num;
}
AVRational ff_choose_timebase(AVFormatContext *s, AVStream *st, int min_precision)
{
AVRational q;
int j;
q = st->time_base;
for (j=2; j<14; j+= 1+(j>2))
while (q.den / q.num < min_precision && q.num % j == 0)
q.num /= j;
while (q.den / q.num < min_precision && q.den < (1<<24))
q.den <<= 1;
return q;
}
enum AVChromaLocation ff_choose_chroma_location(AVFormatContext *s, AVStream *st)
{
AVCodecParameters *par = st->codecpar;
const AVPixFmtDescriptor *pix_desc = av_pix_fmt_desc_get(par->format);
if (par->chroma_location != AVCHROMA_LOC_UNSPECIFIED)
return par->chroma_location;
if (pix_desc) {
if (pix_desc->log2_chroma_h == 0) {
return AVCHROMA_LOC_TOPLEFT;
} else if (pix_desc->log2_chroma_w == 1 && pix_desc->log2_chroma_h == 1) {
if (par->field_order == AV_FIELD_UNKNOWN || par->field_order == AV_FIELD_PROGRESSIVE) {
switch (par->codec_id) {
case AV_CODEC_ID_MJPEG:
case AV_CODEC_ID_MPEG1VIDEO: return AVCHROMA_LOC_CENTER;
}
}
if (par->field_order == AV_FIELD_UNKNOWN || par->field_order != AV_FIELD_PROGRESSIVE) {
switch (par->codec_id) {
case AV_CODEC_ID_MPEG2VIDEO: return AVCHROMA_LOC_LEFT;
}
}
}
}
return AVCHROMA_LOC_UNSPECIFIED;
}
2019-03-20 19:38:48 +02:00
int avformat_alloc_output_context2(AVFormatContext **avctx, ff_const59 AVOutputFormat *oformat,
const char *format, const char *filename)
{
AVFormatContext *s = avformat_alloc_context();
int ret = 0;
*avctx = NULL;
if (!s)
goto nomem;
if (!oformat) {
if (format) {
oformat = av_guess_format(format, NULL, NULL);
if (!oformat) {
av_log(s, AV_LOG_ERROR, "Requested output format '%s' is not a suitable output format\n", format);
ret = AVERROR(EINVAL);
goto error;
}
} else {
oformat = av_guess_format(NULL, filename, NULL);
if (!oformat) {
ret = AVERROR(EINVAL);
av_log(s, AV_LOG_ERROR, "Unable to find a suitable output format for '%s'\n",
filename);
goto error;
}
}
}
s->oformat = oformat;
if (s->oformat->priv_data_size > 0) {
s->priv_data = av_mallocz(s->oformat->priv_data_size);
if (!s->priv_data)
goto nomem;
if (s->oformat->priv_class) {
*(const AVClass**)s->priv_data= s->oformat->priv_class;
av_opt_set_defaults(s->priv_data);
}
} else
s->priv_data = NULL;
if (filename) {
#if FF_API_FORMAT_FILENAME
FF_DISABLE_DEPRECATION_WARNINGS
av_strlcpy(s->filename, filename, sizeof(s->filename));
FF_ENABLE_DEPRECATION_WARNINGS
#endif
if (!(s->url = av_strdup(filename)))
goto nomem;
}
*avctx = s;
return 0;
nomem:
av_log(s, AV_LOG_ERROR, "Out of memory\n");
ret = AVERROR(ENOMEM);
error:
avformat_free_context(s);
return ret;
}
static int validate_codec_tag(AVFormatContext *s, AVStream *st)
{
const AVCodecTag *avctag;
int n;
enum AVCodecID id = AV_CODEC_ID_NONE;
int64_t tag = -1;
/**
* Check that tag + id is in the table
* If neither is in the table -> OK
* If tag is in the table with another id -> FAIL
* If id is in the table with another tag -> FAIL unless strict < normal
*/
for (n = 0; s->oformat->codec_tag[n]; n++) {
avctag = s->oformat->codec_tag[n];
while (avctag->id != AV_CODEC_ID_NONE) {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (avpriv_toupper4(avctag->tag) == avpriv_toupper4(st->codecpar->codec_tag)) {
id = avctag->id;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (id == st->codecpar->codec_id)
return 1;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (avctag->id == st->codecpar->codec_id)
tag = avctag->tag;
avctag++;
}
}
if (id != AV_CODEC_ID_NONE)
return 0;
if (tag >= 0 && (s->strict_std_compliance >= FF_COMPLIANCE_NORMAL))
return 0;
return 1;
}
static int init_muxer(AVFormatContext *s, AVDictionary **options)
{
int ret = 0, i;
AVStream *st;
AVDictionary *tmp = NULL;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
AVCodecParameters *par = NULL;
2019-03-20 19:38:48 +02:00
const AVOutputFormat *of = s->oformat;
const AVCodecDescriptor *desc;
AVDictionaryEntry *e;
if (options)
av_dict_copy(&tmp, *options, 0);
if ((ret = av_opt_set_dict(s, &tmp)) < 0)
goto fail;
if (s->priv_data && s->oformat->priv_class && *(const AVClass**)s->priv_data==s->oformat->priv_class &&
(ret = av_opt_set_dict2(s->priv_data, &tmp, AV_OPT_SEARCH_CHILDREN)) < 0)
goto fail;
#if FF_API_FORMAT_FILENAME
FF_DISABLE_DEPRECATION_WARNINGS
if (!s->url && !(s->url = av_strdup(s->filename))) {
FF_ENABLE_DEPRECATION_WARNINGS
#else
if (!s->url && !(s->url = av_strdup(""))) {
#endif
ret = AVERROR(ENOMEM);
goto fail;
}
#if FF_API_LAVF_AVCTX
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
FF_DISABLE_DEPRECATION_WARNINGS
if (s->nb_streams && s->streams[0]->codec->flags & AV_CODEC_FLAG_BITEXACT) {
if (!(s->flags & AVFMT_FLAG_BITEXACT)) {
av_log(s, AV_LOG_WARNING,
"The AVFormatContext is not in set to bitexact mode, only "
"the AVCodecContext. If this is not intended, set "
"AVFormatContext.flags |= AVFMT_FLAG_BITEXACT.\n");
}
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
FF_ENABLE_DEPRECATION_WARNINGS
#endif
// some sanity checks
if (s->nb_streams == 0 && !(of->flags & AVFMT_NOSTREAMS)) {
av_log(s, AV_LOG_ERROR, "No streams to mux were specified\n");
ret = AVERROR(EINVAL);
goto fail;
}
for (i = 0; i < s->nb_streams; i++) {
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
st = s->streams[i];
par = st->codecpar;
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
#if FF_API_LAVF_AVCTX
FF_DISABLE_DEPRECATION_WARNINGS
if (st->codecpar->codec_type == AVMEDIA_TYPE_UNKNOWN &&
st->codec->codec_type != AVMEDIA_TYPE_UNKNOWN) {
av_log(s, AV_LOG_WARNING, "Using AVStream.codec to pass codec "
"parameters to muxers is deprecated, use AVStream.codecpar "
"instead.\n");
ret = avcodec_parameters_from_context(st->codecpar, st->codec);
if (ret < 0)
goto fail;
}
FF_ENABLE_DEPRECATION_WARNINGS
#endif
if (!st->time_base.num) {
/* fall back on the default timebase values */
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (par->codec_type == AVMEDIA_TYPE_AUDIO && par->sample_rate)
avpriv_set_pts_info(st, 64, 1, par->sample_rate);
else
avpriv_set_pts_info(st, 33, 1, 90000);
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
switch (par->codec_type) {
case AVMEDIA_TYPE_AUDIO:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (par->sample_rate <= 0) {
av_log(s, AV_LOG_ERROR, "sample rate not set\n");
ret = AVERROR(EINVAL);
goto fail;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (!par->block_align)
par->block_align = par->channels *
av_get_bits_per_sample(par->codec_id) >> 3;
break;
case AVMEDIA_TYPE_VIDEO:
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if ((par->width <= 0 || par->height <= 0) &&
!(of->flags & AVFMT_NODIMENSIONS)) {
av_log(s, AV_LOG_ERROR, "dimensions not set\n");
ret = AVERROR(EINVAL);
goto fail;
}
if (av_cmp_q(st->sample_aspect_ratio, par->sample_aspect_ratio)
&& fabs(av_q2d(st->sample_aspect_ratio) - av_q2d(par->sample_aspect_ratio)) > 0.004*av_q2d(st->sample_aspect_ratio)
) {
if (st->sample_aspect_ratio.num != 0 &&
st->sample_aspect_ratio.den != 0 &&
par->sample_aspect_ratio.num != 0 &&
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
par->sample_aspect_ratio.den != 0) {
av_log(s, AV_LOG_ERROR, "Aspect ratio mismatch between muxer "
"(%d/%d) and encoder layer (%d/%d)\n",
st->sample_aspect_ratio.num, st->sample_aspect_ratio.den,
par->sample_aspect_ratio.num,
par->sample_aspect_ratio.den);
ret = AVERROR(EINVAL);
goto fail;
}
}
break;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
desc = avcodec_descriptor_get(par->codec_id);
if (desc && desc->props & AV_CODEC_PROP_REORDER)
st->internal->reorder = 1;
avformat/mux: Set AV_PKT_FLAG_KEY for is_intra_only packet The patch will make audio and subtitle packets be marked as AV_PKT_FLAG_KEY. For audio, it'll caused the audio sample to be sync sample. To verify ref/fate/movenc results: 1. Get the movenc test data [lmwang@vpn ffmpeg]$ libavformat/tests/movenc -w && mkdir -p audio_old && mv *.mp4 audio_old_ After applied the patch: [lmwang@vpn ffmpeg]$ make fate-movenc SAMPLES=../fate-suite [lmwang@vpn ffmpeg]$ libavformat/tests/movenc -w && mkdir -p audio_key && mv *.mp4 audio_key 2. Get l-smash and build boxdumper https://github.com/l-smash/l-smash.git 3. dump the box of crc change mp4 and diff -u [lmwang@vpn ffmpeg]$ ../l-smash/cli/boxdumper --box audio_key/non-empty-moov-no-elst.mp4 > audio_key/non-empty-moov-no-elst.log [lmwang@vpn ffmpeg]$ ../l-smash/cli/boxdumper --box audio_old/non-empty-moov-no-elst.mp4 > audio_old/non-empty-moov-no-elst.log [lmwang@vpn ffmpeg]$ diff -u audio_key/non-empty-moov-no-elst.log audio_old/non-empty-moov-no-elst.log - default_sample_flags = 0x02000000 - independent - sync sample + default_sample_flags = 0x01010000 + dependent + non-sync sample 4. have checked the change of crc are caused by default_sample_flags non-empty-moov.mp4, non-empty-moov-elst.mp4, non-empty-moov-no-elst.mp4, empty-moov.mp4, delay-moov-content.mp4, empty-moov-second-frag.mp4, empty-moov-second-frag-discont.mp4, delay-moov-second-frag-discont.mp4, delay-moov-elst-second-frag.mp4 etc 5 For subtitle, it'll effect for tests/ref/fate/binsub-movtextenc and tests/ref/fate/sub2video, that's expecting result for the subtitle is marked as keyframe. Below is the checking result of binsub-movtextenc: [lmwang@vpn ffmpeg]$ ./ffmpeg -i ../fate-suite/sub/MovText_capability_tester.mp4 -map 0 -scodec mov_text -f mp4 -flags +bitexact -fflags +bitexact -movflags frag_keyframe+empty_moov audio_key/binsub-movtextenc.mp4 [lmwang@vpn ffmpeg]$ ./ffmpeg -i ../fate-suite/sub/MovText_capability_tester.mp4 -map 0 -scodec mov_text -f mp4 -flags +bitexact -fflags +bitexact -movflags frag_keyframe+empty_moov audio_old/binsub-movtextenc.mp4 [lmwang@vpn ffmpeg]$../l-smash/cli/boxdumper audio_key/binsub-movtextenc.mp4 > audio_key/binsub-movtextenc.log [lmwang@vpn ffmpeg]$../l-smash/cli/boxdumper audio_old/binsub-movtextenc.mp4 > audio_old/binsub-movtextenc.log [lmwang@vpn ffmpeg]$ diff -u audio_key/binsub-movtextenc.log audio_old/binsub-movtextenc.log .... // the key difference is the flag for sync sample - flags = 0x000701 + flags = 0x000301 data-offset-present sample-duration-present sample-size-present - sample-flags-present sample_count = 6 - data_offset = 188 + data_offset = 164 sample[0] sample_duration = 1570000 sample_size = 21 - sample_flags = 0x02000000 - independent - sync sample - degradation_priority = 0 sample[1] sample_duration = 510000 sample_size = 2 - sample_flags = 0x01010000 - dependent - non-sync sample - degradation_priority = 0 sample[2] sample_duration = 1690000 sample_size = 9 - sample_flags = 0x02000000 - independent - sync sample - degradation_priority = 0 Suggested-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com> Suggested-by: Nicolas George <george@nsup.org> Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
2020-04-21 17:35:24 +02:00
st->internal->is_intra_only = ff_is_intra_only(par->codec_id);
if (of->codec_tag) {
if ( par->codec_tag
&& par->codec_id == AV_CODEC_ID_RAWVIDEO
&& ( av_codec_get_tag(of->codec_tag, par->codec_id) == 0
|| av_codec_get_tag(of->codec_tag, par->codec_id) == MKTAG('r', 'a', 'w', ' '))
&& !validate_codec_tag(s, st)) {
// the current rawvideo encoding system ends up setting
// the wrong codec_tag for avi/mov, we override it here
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
par->codec_tag = 0;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (par->codec_tag) {
if (!validate_codec_tag(s, st)) {
const uint32_t otag = av_codec_get_tag(s->oformat->codec_tag, par->codec_id);
av_log(s, AV_LOG_ERROR,
"Tag %s incompatible with output codec id '%d' (%s)\n",
av_fourcc2str(par->codec_tag), par->codec_id, av_fourcc2str(otag));
ret = AVERROR_INVALIDDATA;
goto fail;
}
} else
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
par->codec_tag = av_codec_get_tag(of->codec_tag, par->codec_id);
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (par->codec_type != AVMEDIA_TYPE_ATTACHMENT)
s->internal->nb_interleaved_streams++;
}
if (!s->priv_data && of->priv_data_size > 0) {
s->priv_data = av_mallocz(of->priv_data_size);
if (!s->priv_data) {
ret = AVERROR(ENOMEM);
goto fail;
}
if (of->priv_class) {
*(const AVClass **)s->priv_data = of->priv_class;
av_opt_set_defaults(s->priv_data);
if ((ret = av_opt_set_dict2(s->priv_data, &tmp, AV_OPT_SEARCH_CHILDREN)) < 0)
goto fail;
}
}
/* set muxer identification string */
if (!(s->flags & AVFMT_FLAG_BITEXACT)) {
av_dict_set(&s->metadata, "encoder", LIBAVFORMAT_IDENT, 0);
} else {
av_dict_set(&s->metadata, "encoder", NULL, 0);
}
for (e = NULL; e = av_dict_get(s->metadata, "encoder-", e, AV_DICT_IGNORE_SUFFIX); ) {
av_dict_set(&s->metadata, e->key, NULL, 0);
}
if (options) {
av_dict_free(options);
*options = tmp;
}
if (s->oformat->init) {
if ((ret = s->oformat->init(s)) < 0) {
if (s->oformat->deinit)
s->oformat->deinit(s);
return ret;
}
return ret == 0;
}
return 0;
fail:
av_dict_free(&tmp);
return ret;
}
static int init_pts(AVFormatContext *s)
{
int i;
AVStream *st;
/* init PTS generation */
for (i = 0; i < s->nb_streams; i++) {
int64_t den = AV_NOPTS_VALUE;
st = s->streams[i];
switch (st->codecpar->codec_type) {
case AVMEDIA_TYPE_AUDIO:
den = (int64_t)st->time_base.num * st->codecpar->sample_rate;
break;
case AVMEDIA_TYPE_VIDEO:
den = (int64_t)st->time_base.num * st->time_base.den;
break;
default:
break;
}
if (!st->internal->priv_pts)
st->internal->priv_pts = av_mallocz(sizeof(*st->internal->priv_pts));
if (!st->internal->priv_pts)
return AVERROR(ENOMEM);
if (den != AV_NOPTS_VALUE) {
if (den <= 0)
return AVERROR_INVALIDDATA;
frac_init(st->internal->priv_pts, 0, 0, den);
}
}
if (s->avoid_negative_ts < 0) {
av_assert2(s->avoid_negative_ts == AVFMT_AVOID_NEG_TS_AUTO);
if (s->oformat->flags & (AVFMT_TS_NEGATIVE | AVFMT_NOTIMESTAMPS)) {
s->avoid_negative_ts = 0;
} else
s->avoid_negative_ts = AVFMT_AVOID_NEG_TS_MAKE_NON_NEGATIVE;
}
return 0;
}
static void flush_if_needed(AVFormatContext *s)
{
if (s->pb && s->pb->error >= 0) {
if (s->flush_packets == 1 || s->flags & AVFMT_FLAG_FLUSH_PACKETS)
avio_flush(s->pb);
else if (s->flush_packets && !(s->oformat->flags & AVFMT_NOFILE))
avio_write_marker(s->pb, AV_NOPTS_VALUE, AVIO_DATA_MARKER_FLUSH_POINT);
}
}
static void deinit_muxer(AVFormatContext *s)
{
if (s->oformat && s->oformat->deinit && s->internal->initialized)
s->oformat->deinit(s);
s->internal->initialized =
s->internal->streams_initialized = 0;
}
int avformat_init_output(AVFormatContext *s, AVDictionary **options)
{
int ret = 0;
if ((ret = init_muxer(s, options)) < 0)
return ret;
s->internal->initialized = 1;
s->internal->streams_initialized = ret;
if (s->oformat->init && ret) {
if ((ret = init_pts(s)) < 0)
return ret;
return AVSTREAM_INIT_IN_INIT_OUTPUT;
}
return AVSTREAM_INIT_IN_WRITE_HEADER;
}
int avformat_write_header(AVFormatContext *s, AVDictionary **options)
{
int ret = 0;
int already_initialized = s->internal->initialized;
int streams_already_initialized = s->internal->streams_initialized;
if (!already_initialized)
if ((ret = avformat_init_output(s, options)) < 0)
return ret;
if (!(s->oformat->flags & AVFMT_NOFILE) && s->pb)
avio_write_marker(s->pb, AV_NOPTS_VALUE, AVIO_DATA_MARKER_HEADER);
if (s->oformat->write_header) {
ret = s->oformat->write_header(s);
if (ret >= 0 && s->pb && s->pb->error < 0)
ret = s->pb->error;
if (ret < 0)
goto fail;
flush_if_needed(s);
}
if (!(s->oformat->flags & AVFMT_NOFILE) && s->pb)
avio_write_marker(s->pb, AV_NOPTS_VALUE, AVIO_DATA_MARKER_UNKNOWN);
if (!s->internal->streams_initialized) {
if ((ret = init_pts(s)) < 0)
goto fail;
}
return streams_already_initialized;
fail:
deinit_muxer(s);
return ret;
}
2013-12-31 16:09:48 +03:00
#define AV_PKT_FLAG_UNCODED_FRAME 0x2000
#if FF_API_COMPUTE_PKT_FIELDS2 && FF_API_LAVF_AVCTX
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
FF_DISABLE_DEPRECATION_WARNINGS
//FIXME merge with compute_pkt_fields
static int compute_muxer_pkt_fields(AVFormatContext *s, AVStream *st, AVPacket *pkt)
{
int delay = FFMAX(st->codecpar->video_delay, st->internal->avctx->max_b_frames > 0);
int num, den, i;
int frame_size;
if (!s->internal->missing_ts_warning &&
!(s->oformat->flags & AVFMT_NOTIMESTAMPS) &&
(!(st->disposition & AV_DISPOSITION_ATTACHED_PIC) || (st->disposition & AV_DISPOSITION_TIMED_THUMBNAILS)) &&
(pkt->pts == AV_NOPTS_VALUE || pkt->dts == AV_NOPTS_VALUE)) {
av_log(s, AV_LOG_WARNING,
"Timestamps are unset in a packet for stream %d. "
"This is deprecated and will stop working in the future. "
"Fix your code to set the timestamps properly\n", st->index);
s->internal->missing_ts_warning = 1;
}
if (s->debug & FF_FDEBUG_TS)
av_log(s, AV_LOG_DEBUG, "compute_muxer_pkt_fields: pts:%s dts:%s cur_dts:%s b:%d size:%d st:%d\n",
av_ts2str(pkt->pts), av_ts2str(pkt->dts), av_ts2str(st->cur_dts), delay, pkt->size, pkt->stream_index);
if (pkt->duration < 0 && st->codecpar->codec_type != AVMEDIA_TYPE_SUBTITLE) {
av_log(s, AV_LOG_WARNING, "Packet with invalid duration %"PRId64" in stream %d\n",
pkt->duration, pkt->stream_index);
pkt->duration = 0;
}
/* duration field */
if (pkt->duration == 0) {
ff_compute_frame_duration(s, &num, &den, st, NULL, pkt);
if (den && num) {
pkt->duration = av_rescale(1, num * (int64_t)st->time_base.den * st->codec->ticks_per_frame, den * (int64_t)st->time_base.num);
}
}
if (pkt->pts == AV_NOPTS_VALUE && pkt->dts != AV_NOPTS_VALUE && delay == 0)
pkt->pts = pkt->dts;
//XXX/FIXME this is a temporary hack until all encoders output pts
if ((pkt->pts == 0 || pkt->pts == AV_NOPTS_VALUE) && pkt->dts == AV_NOPTS_VALUE && !delay) {
static int warned;
if (!warned) {
av_log(s, AV_LOG_WARNING, "Encoder did not produce proper pts, making some up.\n");
warned = 1;
}
pkt->dts =
// pkt->pts= st->cur_dts;
pkt->pts = st->internal->priv_pts->val;
}
//calculate dts from pts
if (pkt->pts != AV_NOPTS_VALUE && pkt->dts == AV_NOPTS_VALUE && delay <= MAX_REORDER_DELAY) {
st->pts_buffer[0] = pkt->pts;
for (i = 1; i < delay + 1 && st->pts_buffer[i] == AV_NOPTS_VALUE; i++)
st->pts_buffer[i] = pkt->pts + (i - delay - 1) * pkt->duration;
for (i = 0; i<delay && st->pts_buffer[i] > st->pts_buffer[i + 1]; i++)
FFSWAP(int64_t, st->pts_buffer[i], st->pts_buffer[i + 1]);
pkt->dts = st->pts_buffer[0];
}
if (st->cur_dts && st->cur_dts != AV_NOPTS_VALUE &&
((!(s->oformat->flags & AVFMT_TS_NONSTRICT) &&
st->codecpar->codec_type != AVMEDIA_TYPE_SUBTITLE &&
st->codecpar->codec_type != AVMEDIA_TYPE_DATA &&
st->cur_dts >= pkt->dts) || st->cur_dts > pkt->dts)) {
av_log(s, AV_LOG_ERROR,
"Application provided invalid, non monotonically increasing dts to muxer in stream %d: %s >= %s\n",
st->index, av_ts2str(st->cur_dts), av_ts2str(pkt->dts));
return AVERROR(EINVAL);
}
if (pkt->dts != AV_NOPTS_VALUE && pkt->pts != AV_NOPTS_VALUE && pkt->pts < pkt->dts) {
av_log(s, AV_LOG_ERROR,
"pts (%s) < dts (%s) in stream %d\n",
av_ts2str(pkt->pts), av_ts2str(pkt->dts),
st->index);
return AVERROR(EINVAL);
}
if (s->debug & FF_FDEBUG_TS)
av_log(s, AV_LOG_DEBUG, "av_write_frame: pts2:%s dts2:%s\n",
av_ts2str(pkt->pts), av_ts2str(pkt->dts));
st->cur_dts = pkt->dts;
st->internal->priv_pts->val = pkt->dts;
/* update pts */
switch (st->codecpar->codec_type) {
case AVMEDIA_TYPE_AUDIO:
2013-12-31 16:09:48 +03:00
frame_size = (pkt->flags & AV_PKT_FLAG_UNCODED_FRAME) ?
avformat/mux: Make uncoded frames av_packet_unref() compatible Currently uncoded frames (i.e. packets whose data actually points to an AVFrame) are not refcounted. As a consequence, calling av_packet_unref() on them will not free them, but may simply make sure that they leak by losing the pointer to the frame. This commit changes this by actually making uncoded frames refcounted. In order not to rely on sizeof(AVFrame) (which is not part of the public API and so must not be used here in libavformat) the packet's data is changed to a (padded) buffer containing just a pointer to an AVFrame. Said buffer is owned by an AVBuffer with a custom free function that frees the frame as well as the buffer. Thereby the pointer/the AVBuffer owns the AVFrame. Said ownership can actually be transferred by copying and resetting the pointer, as might happen when actually writing the uncoded frames in AVOutputFormat.write_uncoded_frame() (although currently no muxer makes use of this possibility). This makes packets containing uncoded frames compatible with av_packet_unref(). This already has three advantages in interleaved mode: 1. If an error happens at the preparatory steps (before the packet is put into the interleavement queue), the frame is properly freed. 2. If the trailer is never written, the frames still in the interleavement queue will now be properly freed by ff_packet_list_free(). 3. The custom code for moving the packet to the packet list in ff_interleave_add_packet() can be removed. It will also simplify fixing further memleaks in future commits. Suggested-by: Marton Balint <cus@passwd.hu> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-08-09 14:32:15 +02:00
(*(AVFrame **)pkt->data)->nb_samples :
av_get_audio_frame_duration(st->codec, pkt->size);
/* HACK/FIXME, we skip the initial 0 size packets as they are most
* likely equal to the encoder delay, but it would be better if we
* had the real timestamps from the encoder */
if (frame_size >= 0 && (pkt->size || st->internal->priv_pts->num != st->internal->priv_pts->den >> 1 || st->internal->priv_pts->val)) {
frac_add(st->internal->priv_pts, (int64_t)st->time_base.den * frame_size);
}
break;
case AVMEDIA_TYPE_VIDEO:
frac_add(st->internal->priv_pts, (int64_t)st->time_base.den * st->time_base.num);
break;
}
return 0;
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
FF_ENABLE_DEPRECATION_WARNINGS
#endif
/**
* Shift timestamps and call muxer; the original pts/dts are not kept.
*
* FIXME: this function should NEVER get undefined pts/dts beside when the
* AVFMT_NOTIMESTAMPS is set.
* Those additional safety checks should be dropped once the correct checks
* are set in the callers.
*/
static int write_packet(AVFormatContext *s, AVPacket *pkt)
{
int ret;
// If the timestamp offsetting below is adjusted, adjust
// ff_interleaved_peek similarly.
if (s->output_ts_offset) {
AVStream *st = s->streams[pkt->stream_index];
int64_t offset = av_rescale_q(s->output_ts_offset, AV_TIME_BASE_Q, st->time_base);
if (pkt->dts != AV_NOPTS_VALUE)
pkt->dts += offset;
if (pkt->pts != AV_NOPTS_VALUE)
pkt->pts += offset;
}
if (s->avoid_negative_ts > 0) {
AVStream *st = s->streams[pkt->stream_index];
int64_t offset = st->mux_ts_offset;
int64_t ts = s->internal->avoid_negative_ts_use_pts ? pkt->pts : pkt->dts;
if (s->internal->offset == AV_NOPTS_VALUE && ts != AV_NOPTS_VALUE &&
(ts < 0 || s->avoid_negative_ts == AVFMT_AVOID_NEG_TS_MAKE_ZERO)) {
s->internal->offset = -ts;
s->internal->offset_timebase = st->time_base;
}
if (s->internal->offset != AV_NOPTS_VALUE && !offset) {
offset = st->mux_ts_offset =
av_rescale_q_rnd(s->internal->offset,
s->internal->offset_timebase,
st->time_base,
AV_ROUND_UP);
}
if (pkt->dts != AV_NOPTS_VALUE)
pkt->dts += offset;
if (pkt->pts != AV_NOPTS_VALUE)
pkt->pts += offset;
if (s->internal->avoid_negative_ts_use_pts) {
if (pkt->pts != AV_NOPTS_VALUE && pkt->pts < 0) {
av_log(s, AV_LOG_WARNING, "failed to avoid negative "
"pts %s in stream %d.\n"
"Try -avoid_negative_ts 1 as a possible workaround.\n",
av_ts2str(pkt->pts),
pkt->stream_index
);
}
} else {
av_assert2(pkt->dts == AV_NOPTS_VALUE || pkt->dts >= 0 || s->max_interleave_delta > 0);
if (pkt->dts != AV_NOPTS_VALUE && pkt->dts < 0) {
av_log(s, AV_LOG_WARNING,
"Packets poorly interleaved, failed to avoid negative "
"timestamp %s in stream %d.\n"
"Try -max_interleave_delta 0 as a possible workaround.\n",
av_ts2str(pkt->dts),
pkt->stream_index
);
}
}
}
2013-12-31 16:09:48 +03:00
if ((pkt->flags & AV_PKT_FLAG_UNCODED_FRAME)) {
avformat/mux: Make uncoded frames av_packet_unref() compatible Currently uncoded frames (i.e. packets whose data actually points to an AVFrame) are not refcounted. As a consequence, calling av_packet_unref() on them will not free them, but may simply make sure that they leak by losing the pointer to the frame. This commit changes this by actually making uncoded frames refcounted. In order not to rely on sizeof(AVFrame) (which is not part of the public API and so must not be used here in libavformat) the packet's data is changed to a (padded) buffer containing just a pointer to an AVFrame. Said buffer is owned by an AVBuffer with a custom free function that frees the frame as well as the buffer. Thereby the pointer/the AVBuffer owns the AVFrame. Said ownership can actually be transferred by copying and resetting the pointer, as might happen when actually writing the uncoded frames in AVOutputFormat.write_uncoded_frame() (although currently no muxer makes use of this possibility). This makes packets containing uncoded frames compatible with av_packet_unref(). This already has three advantages in interleaved mode: 1. If an error happens at the preparatory steps (before the packet is put into the interleavement queue), the frame is properly freed. 2. If the trailer is never written, the frames still in the interleavement queue will now be properly freed by ff_packet_list_free(). 3. The custom code for moving the packet to the packet list in ff_interleave_add_packet() can be removed. It will also simplify fixing further memleaks in future commits. Suggested-by: Marton Balint <cus@passwd.hu> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-08-09 14:32:15 +02:00
AVFrame **frame = (AVFrame **)pkt->data;
av_assert0(pkt->size == sizeof(*frame));
ret = s->oformat->write_uncoded_frame(s, pkt->stream_index, frame, 0);
2013-12-31 16:09:48 +03:00
} else {
ret = s->oformat->write_packet(s, pkt);
}
if (s->pb && ret >= 0) {
flush_if_needed(s);
if (s->pb->error < 0)
ret = s->pb->error;
}
if (ret >= 0)
s->streams[pkt->stream_index]->nb_frames++;
return ret;
}
static int check_packet(AVFormatContext *s, AVPacket *pkt)
{
if (pkt->stream_index < 0 || pkt->stream_index >= s->nb_streams) {
av_log(s, AV_LOG_ERROR, "Invalid packet stream index: %d\n",
pkt->stream_index);
return AVERROR(EINVAL);
}
lavf: replace AVStream.codec with AVStream.codecpar Currently, AVStream contains an embedded AVCodecContext instance, which is used by demuxers to export stream parameters to the caller and by muxers to receive stream parameters from the caller. It is also used internally as the codec context that is passed to parsers. In addition, it is also widely used by the callers as the decoding (when demuxer) or encoding (when muxing) context, though this has been officially discouraged since Libav 11. There are multiple important problems with this approach: - the fields in AVCodecContext are in general one of * stream parameters * codec options * codec state However, it's not clear which ones are which. It is consequently unclear which fields are a demuxer allowed to set or a muxer allowed to read. This leads to erratic behaviour depending on whether decoding or encoding is being performed or not (and whether it uses the AVStream embedded codec context). - various synchronization issues arising from the fact that the same context is used by several different APIs (muxers/demuxers, parsers, bitstream filters and encoders/decoders) simultaneously, with there being no clear rules for who can modify what and the different processes being typically delayed with respect to each other. - avformat_find_stream_info() making it necessary to support opening and closing a single codec context multiple times, thus complicating the semantics of freeing various allocated objects in the codec context. Those problems are resolved by replacing the AVStream embedded codec context with a newly added AVCodecParameters instance, which stores only the stream parameters exported by the demuxers or read by the muxers.
2014-06-18 21:42:52 +03:00
if (s->streams[pkt->stream_index]->codecpar->codec_type == AVMEDIA_TYPE_ATTACHMENT) {
av_log(s, AV_LOG_ERROR, "Received a packet for an attachment stream.\n");
return AVERROR(EINVAL);
}
return 0;
}
static int prepare_input_packet(AVFormatContext *s, AVStream *st, AVPacket *pkt)
{
#if !FF_API_COMPUTE_PKT_FIELDS2 || !FF_API_LAVF_AVCTX
/* sanitize the timestamps */
if (!(s->oformat->flags & AVFMT_NOTIMESTAMPS)) {
/* when there is no reordering (so dts is equal to pts), but
* only one of them is set, set the other as well */
if (!st->internal->reorder) {
if (pkt->pts == AV_NOPTS_VALUE && pkt->dts != AV_NOPTS_VALUE)
pkt->pts = pkt->dts;
if (pkt->dts == AV_NOPTS_VALUE && pkt->pts != AV_NOPTS_VALUE)
pkt->dts = pkt->pts;
}
/* check that the timestamps are set */
if (pkt->pts == AV_NOPTS_VALUE || pkt->dts == AV_NOPTS_VALUE) {
av_log(s, AV_LOG_ERROR,
"Timestamps are unset in a packet for stream %d\n", st->index);
return AVERROR(EINVAL);
}
/* check that the dts are increasing (or at least non-decreasing,
* if the format allows it */
if (st->cur_dts != AV_NOPTS_VALUE &&
((!(s->oformat->flags & AVFMT_TS_NONSTRICT) && st->cur_dts >= pkt->dts) ||
st->cur_dts > pkt->dts)) {
av_log(s, AV_LOG_ERROR,
"Application provided invalid, non monotonically increasing "
"dts to muxer in stream %d: %" PRId64 " >= %" PRId64 "\n",
st->index, st->cur_dts, pkt->dts);
return AVERROR(EINVAL);
}
if (pkt->pts < pkt->dts) {
av_log(s, AV_LOG_ERROR, "pts %" PRId64 " < dts %" PRId64 " in stream %d\n",
pkt->pts, pkt->dts, st->index);
return AVERROR(EINVAL);
}
}
#endif
avformat/mux: Set AV_PKT_FLAG_KEY for is_intra_only packet The patch will make audio and subtitle packets be marked as AV_PKT_FLAG_KEY. For audio, it'll caused the audio sample to be sync sample. To verify ref/fate/movenc results: 1. Get the movenc test data [lmwang@vpn ffmpeg]$ libavformat/tests/movenc -w && mkdir -p audio_old && mv *.mp4 audio_old_ After applied the patch: [lmwang@vpn ffmpeg]$ make fate-movenc SAMPLES=../fate-suite [lmwang@vpn ffmpeg]$ libavformat/tests/movenc -w && mkdir -p audio_key && mv *.mp4 audio_key 2. Get l-smash and build boxdumper https://github.com/l-smash/l-smash.git 3. dump the box of crc change mp4 and diff -u [lmwang@vpn ffmpeg]$ ../l-smash/cli/boxdumper --box audio_key/non-empty-moov-no-elst.mp4 > audio_key/non-empty-moov-no-elst.log [lmwang@vpn ffmpeg]$ ../l-smash/cli/boxdumper --box audio_old/non-empty-moov-no-elst.mp4 > audio_old/non-empty-moov-no-elst.log [lmwang@vpn ffmpeg]$ diff -u audio_key/non-empty-moov-no-elst.log audio_old/non-empty-moov-no-elst.log - default_sample_flags = 0x02000000 - independent - sync sample + default_sample_flags = 0x01010000 + dependent + non-sync sample 4. have checked the change of crc are caused by default_sample_flags non-empty-moov.mp4, non-empty-moov-elst.mp4, non-empty-moov-no-elst.mp4, empty-moov.mp4, delay-moov-content.mp4, empty-moov-second-frag.mp4, empty-moov-second-frag-discont.mp4, delay-moov-second-frag-discont.mp4, delay-moov-elst-second-frag.mp4 etc 5 For subtitle, it'll effect for tests/ref/fate/binsub-movtextenc and tests/ref/fate/sub2video, that's expecting result for the subtitle is marked as keyframe. Below is the checking result of binsub-movtextenc: [lmwang@vpn ffmpeg]$ ./ffmpeg -i ../fate-suite/sub/MovText_capability_tester.mp4 -map 0 -scodec mov_text -f mp4 -flags +bitexact -fflags +bitexact -movflags frag_keyframe+empty_moov audio_key/binsub-movtextenc.mp4 [lmwang@vpn ffmpeg]$ ./ffmpeg -i ../fate-suite/sub/MovText_capability_tester.mp4 -map 0 -scodec mov_text -f mp4 -flags +bitexact -fflags +bitexact -movflags frag_keyframe+empty_moov audio_old/binsub-movtextenc.mp4 [lmwang@vpn ffmpeg]$../l-smash/cli/boxdumper audio_key/binsub-movtextenc.mp4 > audio_key/binsub-movtextenc.log [lmwang@vpn ffmpeg]$../l-smash/cli/boxdumper audio_old/binsub-movtextenc.mp4 > audio_old/binsub-movtextenc.log [lmwang@vpn ffmpeg]$ diff -u audio_key/binsub-movtextenc.log audio_old/binsub-movtextenc.log .... // the key difference is the flag for sync sample - flags = 0x000701 + flags = 0x000301 data-offset-present sample-duration-present sample-size-present - sample-flags-present sample_count = 6 - data_offset = 188 + data_offset = 164 sample[0] sample_duration = 1570000 sample_size = 21 - sample_flags = 0x02000000 - independent - sync sample - degradation_priority = 0 sample[1] sample_duration = 510000 sample_size = 2 - sample_flags = 0x01010000 - dependent - non-sync sample - degradation_priority = 0 sample[2] sample_duration = 1690000 sample_size = 9 - sample_flags = 0x02000000 - independent - sync sample - degradation_priority = 0 Suggested-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com> Suggested-by: Nicolas George <george@nsup.org> Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
2020-04-21 17:35:24 +02:00
/* update flags */
if (st->internal->is_intra_only)
pkt->flags |= AV_PKT_FLAG_KEY;
return 0;
}
#define CHUNK_START 0x1000
int ff_interleave_add_packet(AVFormatContext *s, AVPacket *pkt,
int (*compare)(AVFormatContext *, const AVPacket *, const AVPacket *))
{
int ret;
AVPacketList **next_point, *this_pktl;
AVStream *st = s->streams[pkt->stream_index];
int chunked = s->max_chunk_size || s->max_chunk_duration;
this_pktl = av_malloc(sizeof(AVPacketList));
if (!this_pktl) {
av_packet_unref(pkt);
return AVERROR(ENOMEM);
}
avformat/mux: Make uncoded frames av_packet_unref() compatible Currently uncoded frames (i.e. packets whose data actually points to an AVFrame) are not refcounted. As a consequence, calling av_packet_unref() on them will not free them, but may simply make sure that they leak by losing the pointer to the frame. This commit changes this by actually making uncoded frames refcounted. In order not to rely on sizeof(AVFrame) (which is not part of the public API and so must not be used here in libavformat) the packet's data is changed to a (padded) buffer containing just a pointer to an AVFrame. Said buffer is owned by an AVBuffer with a custom free function that frees the frame as well as the buffer. Thereby the pointer/the AVBuffer owns the AVFrame. Said ownership can actually be transferred by copying and resetting the pointer, as might happen when actually writing the uncoded frames in AVOutputFormat.write_uncoded_frame() (although currently no muxer makes use of this possibility). This makes packets containing uncoded frames compatible with av_packet_unref(). This already has three advantages in interleaved mode: 1. If an error happens at the preparatory steps (before the packet is put into the interleavement queue), the frame is properly freed. 2. If the trailer is never written, the frames still in the interleavement queue will now be properly freed by ff_packet_list_free(). 3. The custom code for moving the packet to the packet list in ff_interleave_add_packet() can be removed. It will also simplify fixing further memleaks in future commits. Suggested-by: Marton Balint <cus@passwd.hu> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-08-09 14:32:15 +02:00
if ((ret = av_packet_make_refcounted(pkt)) < 0) {
av_free(this_pktl);
av_packet_unref(pkt);
avformat/mux: Make uncoded frames av_packet_unref() compatible Currently uncoded frames (i.e. packets whose data actually points to an AVFrame) are not refcounted. As a consequence, calling av_packet_unref() on them will not free them, but may simply make sure that they leak by losing the pointer to the frame. This commit changes this by actually making uncoded frames refcounted. In order not to rely on sizeof(AVFrame) (which is not part of the public API and so must not be used here in libavformat) the packet's data is changed to a (padded) buffer containing just a pointer to an AVFrame. Said buffer is owned by an AVBuffer with a custom free function that frees the frame as well as the buffer. Thereby the pointer/the AVBuffer owns the AVFrame. Said ownership can actually be transferred by copying and resetting the pointer, as might happen when actually writing the uncoded frames in AVOutputFormat.write_uncoded_frame() (although currently no muxer makes use of this possibility). This makes packets containing uncoded frames compatible with av_packet_unref(). This already has three advantages in interleaved mode: 1. If an error happens at the preparatory steps (before the packet is put into the interleavement queue), the frame is properly freed. 2. If the trailer is never written, the frames still in the interleavement queue will now be properly freed by ff_packet_list_free(). 3. The custom code for moving the packet to the packet list in ff_interleave_add_packet() can be removed. It will also simplify fixing further memleaks in future commits. Suggested-by: Marton Balint <cus@passwd.hu> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-08-09 14:32:15 +02:00
return ret;
2013-12-31 16:09:48 +03:00
}
av_packet_move_ref(&this_pktl->pkt, pkt);
pkt = &this_pktl->pkt;
if (st->last_in_packet_buffer) {
next_point = &(st->last_in_packet_buffer->next);
} else {
next_point = &s->internal->packet_buffer;
}
if (chunked) {
uint64_t max= av_rescale_q_rnd(s->max_chunk_duration, AV_TIME_BASE_Q, st->time_base, AV_ROUND_UP);
st->interleaver_chunk_size += pkt->size;
st->interleaver_chunk_duration += pkt->duration;
if ( (s->max_chunk_size && st->interleaver_chunk_size > s->max_chunk_size)
|| (max && st->interleaver_chunk_duration > max)) {
st->interleaver_chunk_size = 0;
pkt->flags |= CHUNK_START;
if (max && st->interleaver_chunk_duration > max) {
int64_t syncoffset = (st->codecpar->codec_type == AVMEDIA_TYPE_VIDEO)*max/2;
int64_t syncto = av_rescale(pkt->dts + syncoffset, 1, max)*max - syncoffset;
st->interleaver_chunk_duration += (pkt->dts - syncto)/8 - max;
} else
st->interleaver_chunk_duration = 0;
}
}
if (*next_point) {
if (chunked && !(pkt->flags & CHUNK_START))
goto next_non_null;
if (compare(s, &s->internal->packet_buffer_end->pkt, pkt)) {
while ( *next_point
&& ((chunked && !((*next_point)->pkt.flags&CHUNK_START))
|| !compare(s, &(*next_point)->pkt, pkt)))
next_point = &(*next_point)->next;
if (*next_point)
goto next_non_null;
} else {
next_point = &(s->internal->packet_buffer_end->next);
}
}
av_assert1(!*next_point);
s->internal->packet_buffer_end = this_pktl;
next_non_null:
this_pktl->next = *next_point;
st->last_in_packet_buffer = *next_point = this_pktl;
return 0;
}
static int interleave_compare_dts(AVFormatContext *s, const AVPacket *next,
const AVPacket *pkt)
{
AVStream *st = s->streams[pkt->stream_index];
AVStream *st2 = s->streams[next->stream_index];
int comp = av_compare_ts(next->dts, st2->time_base, pkt->dts,
st->time_base);
if (s->audio_preload) {
int preload = st ->codecpar->codec_type == AVMEDIA_TYPE_AUDIO;
int preload2 = st2->codecpar->codec_type == AVMEDIA_TYPE_AUDIO;
if (preload != preload2) {
int64_t ts, ts2;
preload *= s->audio_preload;
preload2 *= s->audio_preload;
ts = av_rescale_q(pkt ->dts, st ->time_base, AV_TIME_BASE_Q) - preload;
ts2= av_rescale_q(next->dts, st2->time_base, AV_TIME_BASE_Q) - preload2;
if (ts == ts2) {
ts = ((uint64_t)pkt ->dts*st ->time_base.num*AV_TIME_BASE - (uint64_t)preload *st ->time_base.den)*st2->time_base.den
- ((uint64_t)next->dts*st2->time_base.num*AV_TIME_BASE - (uint64_t)preload2*st2->time_base.den)*st ->time_base.den;
ts2 = 0;
}
comp = (ts2 > ts) - (ts2 < ts);
}
}
if (comp == 0)
return pkt->stream_index < next->stream_index;
return comp > 0;
}
int ff_interleave_packet_per_dts(AVFormatContext *s, AVPacket *out,
AVPacket *pkt, int flush)
{
AVPacketList *pktl;
int stream_count = 0;
int noninterleaved_count = 0;
int i, ret;
int eof = flush;
if (pkt) {
if ((ret = ff_interleave_add_packet(s, pkt, interleave_compare_dts)) < 0)
return ret;
}
for (i = 0; i < s->nb_streams; i++) {
if (s->streams[i]->last_in_packet_buffer) {
++stream_count;
} else if (s->streams[i]->codecpar->codec_type != AVMEDIA_TYPE_ATTACHMENT &&
s->streams[i]->codecpar->codec_id != AV_CODEC_ID_VP8 &&
s->streams[i]->codecpar->codec_id != AV_CODEC_ID_VP9) {
++noninterleaved_count;
}
}
if (s->internal->nb_interleaved_streams == stream_count)
flush = 1;
if (s->max_interleave_delta > 0 &&
s->internal->packet_buffer &&
!flush &&
s->internal->nb_interleaved_streams == stream_count+noninterleaved_count
) {
AVPacket *top_pkt = &s->internal->packet_buffer->pkt;
int64_t delta_dts = INT64_MIN;
int64_t top_dts = av_rescale_q(top_pkt->dts,
s->streams[top_pkt->stream_index]->time_base,
AV_TIME_BASE_Q);
for (i = 0; i < s->nb_streams; i++) {
int64_t last_dts;
const AVPacketList *last = s->streams[i]->last_in_packet_buffer;
if (!last)
continue;
last_dts = av_rescale_q(last->pkt.dts,
s->streams[i]->time_base,
AV_TIME_BASE_Q);
delta_dts = FFMAX(delta_dts, last_dts - top_dts);
}
if (delta_dts > s->max_interleave_delta) {
av_log(s, AV_LOG_DEBUG,
"Delay between the first packet and last packet in the "
"muxing queue is %"PRId64" > %"PRId64": forcing output\n",
delta_dts, s->max_interleave_delta);
flush = 1;
}
}
if (s->internal->packet_buffer &&
eof &&
(s->flags & AVFMT_FLAG_SHORTEST) &&
s->internal->shortest_end == AV_NOPTS_VALUE) {
AVPacket *top_pkt = &s->internal->packet_buffer->pkt;
s->internal->shortest_end = av_rescale_q(top_pkt->dts,
s->streams[top_pkt->stream_index]->time_base,
AV_TIME_BASE_Q);
}
if (s->internal->shortest_end != AV_NOPTS_VALUE) {
while (s->internal->packet_buffer) {
AVPacket *top_pkt = &s->internal->packet_buffer->pkt;
AVStream *st;
int64_t top_dts = av_rescale_q(top_pkt->dts,
s->streams[top_pkt->stream_index]->time_base,
AV_TIME_BASE_Q);
if (s->internal->shortest_end + 1 >= top_dts)
break;
pktl = s->internal->packet_buffer;
st = s->streams[pktl->pkt.stream_index];
s->internal->packet_buffer = pktl->next;
if (!s->internal->packet_buffer)
s->internal->packet_buffer_end = NULL;
if (st->last_in_packet_buffer == pktl)
st->last_in_packet_buffer = NULL;
av_packet_unref(&pktl->pkt);
av_freep(&pktl);
flush = 0;
}
}
if (stream_count && flush) {
AVStream *st;
pktl = s->internal->packet_buffer;
*out = pktl->pkt;
st = s->streams[out->stream_index];
s->internal->packet_buffer = pktl->next;
if (!s->internal->packet_buffer)
s->internal->packet_buffer_end = NULL;
if (st->last_in_packet_buffer == pktl)
st->last_in_packet_buffer = NULL;
av_freep(&pktl);
return 1;
} else {
return 0;
}
}
int ff_interleaved_peek(AVFormatContext *s, int stream,
AVPacket *pkt, int add_offset)
{
AVPacketList *pktl = s->internal->packet_buffer;
while (pktl) {
if (pktl->pkt.stream_index == stream) {
*pkt = pktl->pkt;
if (add_offset) {
AVStream *st = s->streams[pkt->stream_index];
int64_t offset = st->mux_ts_offset;
if (s->output_ts_offset)
offset += av_rescale_q(s->output_ts_offset, AV_TIME_BASE_Q, st->time_base);
if (pkt->dts != AV_NOPTS_VALUE)
pkt->dts += offset;
if (pkt->pts != AV_NOPTS_VALUE)
pkt->pts += offset;
}
return 0;
}
pktl = pktl->next;
}
return AVERROR(ENOENT);
}
/**
* Interleave an AVPacket correctly so it can be muxed.
* @param out the interleaved packet will be output here
* @param in the input packet; will always be blank on return if not NULL
* @param flush 1 if no further packets are available as input and all
* remaining packets should be output
* @return 1 if a packet was output, 0 if no packet could be output,
* < 0 if an error occurred
*/
static int interleave_packet(AVFormatContext *s, AVPacket *out, AVPacket *in, int flush)
{
if (s->oformat->interleave_packet) {
int ret = s->oformat->interleave_packet(s, out, in, flush);
if (in)
av_packet_unref(in);
return ret;
} else
return ff_interleave_packet_per_dts(s, out, in, flush);
}
static int check_bitstream(AVFormatContext *s, AVStream *st, AVPacket *pkt)
{
int ret;
if (!(s->flags & AVFMT_FLAG_AUTO_BSF))
return 1;
if (s->oformat->check_bitstream) {
if (!st->internal->bitstream_checked) {
if ((ret = s->oformat->check_bitstream(s, pkt)) < 0)
return ret;
else if (ret == 1)
st->internal->bitstream_checked = 1;
}
}
return 1;
}
static int interleaved_write_packet(AVFormatContext *s, AVPacket *pkt, int flush)
{
for (;; ) {
AVPacket opkt;
int ret = interleave_packet(s, &opkt, pkt, flush);
if (ret <= 0)
return ret;
pkt = NULL;
ret = write_packet(s, &opkt);
av_packet_unref(&opkt);
if (ret < 0)
return ret;
}
}
static int write_packet_common(AVFormatContext *s, AVStream *st, AVPacket *pkt, int interleaved)
{
int ret;
if (s->debug & FF_FDEBUG_TS)
av_log(s, AV_LOG_DEBUG, "%s size:%d dts:%s pts:%s\n", __FUNCTION__,
pkt->size, av_ts2str(pkt->dts), av_ts2str(pkt->pts));
#if FF_API_COMPUTE_PKT_FIELDS2 && FF_API_LAVF_AVCTX
if ((ret = compute_muxer_pkt_fields(s, st, pkt)) < 0 && !(s->oformat->flags & AVFMT_NOTIMESTAMPS))
return ret;
#endif
if (interleaved) {
if (pkt->dts == AV_NOPTS_VALUE && !(s->oformat->flags & AVFMT_NOTIMESTAMPS))
return AVERROR(EINVAL);
return interleaved_write_packet(s, pkt, 0);
} else {
return write_packet(s, pkt);
}
}
static int write_packets_from_bsfs(AVFormatContext *s, AVStream *st, AVPacket *pkt, int interleaved)
{
AVBSFContext *bsfc = st->internal->bsfc;
int ret;
if ((ret = av_bsf_send_packet(bsfc, pkt)) < 0) {
av_log(s, AV_LOG_ERROR,
"Failed to send packet to filter %s for stream %d\n",
bsfc->filter->name, st->index);
return ret;
}
do {
ret = av_bsf_receive_packet(bsfc, pkt);
if (ret < 0) {
if (ret == AVERROR(EAGAIN) || ret == AVERROR_EOF)
return 0;
av_log(s, AV_LOG_ERROR, "Error applying bitstream filters to an output "
"packet for stream #%d: %s\n", st->index, av_err2str(ret));
if (!(s->error_recognition & AV_EF_EXPLODE) && ret != AVERROR(ENOMEM))
continue;
return ret;
}
av_packet_rescale_ts(pkt, bsfc->time_base_out, st->time_base);
ret = write_packet_common(s, st, pkt, interleaved);
if (ret >= 0 && !interleaved) // a successful write_packet_common already unrefed pkt for interleaved
av_packet_unref(pkt);
} while (ret >= 0);
return ret;
}
static int write_packets_common(AVFormatContext *s, AVPacket *pkt, int interleaved)
{
AVStream *st;
int ret = check_packet(s, pkt);
if (ret < 0)
return ret;
st = s->streams[pkt->stream_index];
ret = prepare_input_packet(s, st, pkt);
if (ret < 0)
return ret;
ret = check_bitstream(s, st, pkt);
if (ret < 0)
return ret;
if (st->internal->bsfc) {
return write_packets_from_bsfs(s, st, pkt, interleaved);
} else {
return write_packet_common(s, st, pkt, interleaved);
}
}
int av_write_frame(AVFormatContext *s, AVPacket *in)
{
AVPacket local_pkt, *pkt = &local_pkt;
int ret;
if (!in) {
if (s->oformat->flags & AVFMT_ALLOW_FLUSH) {
ret = s->oformat->write_packet(s, NULL);
flush_if_needed(s);
if (ret >= 0 && s->pb && s->pb->error < 0)
ret = s->pb->error;
return ret;
}
return 1;
}
if (in->flags & AV_PKT_FLAG_UNCODED_FRAME) {
pkt = in;
} else {
/* We don't own in, so we have to make sure not to modify it.
* The following avoids copying in's data unnecessarily.
* Copying side data is unavoidable as a bitstream filter
* may change it, e.g. free it on errors. */
pkt->buf = NULL;
pkt->data = in->data;
pkt->size = in->size;
ret = av_packet_copy_props(pkt, in);
if (ret < 0)
return ret;
if (in->buf) {
pkt->buf = av_buffer_ref(in->buf);
if (!pkt->buf) {
ret = AVERROR(ENOMEM);
goto fail;
}
}
}
ret = write_packets_common(s, pkt, 0/*non-interleaved*/);
fail:
// Uncoded frames using the noninterleaved codepath are also freed here
av_packet_unref(pkt);
return ret;
}
int av_interleaved_write_frame(AVFormatContext *s, AVPacket *pkt)
{
int ret;
if (pkt) {
ret = write_packets_common(s, pkt, 1/*interleaved*/);
if (ret < 0)
av_packet_unref(pkt);
return ret;
} else {
av_log(s, AV_LOG_TRACE, "av_interleaved_write_frame FLUSH\n");
return interleaved_write_packet(s, NULL, 1/*flush*/);
}
}
int av_write_trailer(AVFormatContext *s)
{
int i, ret1, ret = 0;
AVPacket pkt = {0};
av_init_packet(&pkt);
for (i = 0; i < s->nb_streams; i++) {
if (s->streams[i]->internal->bsfc) {
ret1 = write_packets_from_bsfs(s, s->streams[i], &pkt, 1/*interleaved*/);
if (ret1 < 0)
av_packet_unref(&pkt);
if (ret >= 0)
ret = ret1;
}
}
ret1 = interleaved_write_packet(s, NULL, 1);
if (ret >= 0)
ret = ret1;
if (s->oformat->write_trailer) {
if (!(s->oformat->flags & AVFMT_NOFILE) && s->pb)
avio_write_marker(s->pb, AV_NOPTS_VALUE, AVIO_DATA_MARKER_TRAILER);
if (ret >= 0) {
ret = s->oformat->write_trailer(s);
} else {
s->oformat->write_trailer(s);
}
}
deinit_muxer(s);
if (s->pb)
avio_flush(s->pb);
if (ret == 0)
ret = s->pb ? s->pb->error : 0;
for (i = 0; i < s->nb_streams; i++) {
av_freep(&s->streams[i]->priv_data);
av_freep(&s->streams[i]->index_entries);
}
if (s->oformat->priv_class)
av_opt_free(s->priv_data);
av_freep(&s->priv_data);
return ret;
}
int av_get_output_timestamp(struct AVFormatContext *s, int stream,
int64_t *dts, int64_t *wall)
{
if (!s->oformat || !s->oformat->get_output_timestamp)
return AVERROR(ENOSYS);
s->oformat->get_output_timestamp(s, stream, dts, wall);
return 0;
}
2013-06-15 12:56:36 +03:00
int ff_write_chained(AVFormatContext *dst, int dst_stream, AVPacket *pkt,
AVFormatContext *src, int interleave)
2013-06-15 12:56:36 +03:00
{
AVPacket local_pkt;
int ret;
2013-06-15 12:56:36 +03:00
local_pkt = *pkt;
local_pkt.stream_index = dst_stream;
av_packet_rescale_ts(&local_pkt,
src->streams[pkt->stream_index]->time_base,
dst->streams[dst_stream]->time_base);
if (interleave) ret = av_interleaved_write_frame(dst, &local_pkt);
else ret = av_write_frame(dst, &local_pkt);
pkt->buf = local_pkt.buf;
pkt->side_data = local_pkt.side_data;
pkt->side_data_elems = local_pkt.side_data_elems;
return ret;
2013-06-15 12:56:36 +03:00
}
2013-12-31 16:09:48 +03:00
avformat/mux: Make uncoded frames av_packet_unref() compatible Currently uncoded frames (i.e. packets whose data actually points to an AVFrame) are not refcounted. As a consequence, calling av_packet_unref() on them will not free them, but may simply make sure that they leak by losing the pointer to the frame. This commit changes this by actually making uncoded frames refcounted. In order not to rely on sizeof(AVFrame) (which is not part of the public API and so must not be used here in libavformat) the packet's data is changed to a (padded) buffer containing just a pointer to an AVFrame. Said buffer is owned by an AVBuffer with a custom free function that frees the frame as well as the buffer. Thereby the pointer/the AVBuffer owns the AVFrame. Said ownership can actually be transferred by copying and resetting the pointer, as might happen when actually writing the uncoded frames in AVOutputFormat.write_uncoded_frame() (although currently no muxer makes use of this possibility). This makes packets containing uncoded frames compatible with av_packet_unref(). This already has three advantages in interleaved mode: 1. If an error happens at the preparatory steps (before the packet is put into the interleavement queue), the frame is properly freed. 2. If the trailer is never written, the frames still in the interleavement queue will now be properly freed by ff_packet_list_free(). 3. The custom code for moving the packet to the packet list in ff_interleave_add_packet() can be removed. It will also simplify fixing further memleaks in future commits. Suggested-by: Marton Balint <cus@passwd.hu> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-08-09 14:32:15 +02:00
static void uncoded_frame_free(void *unused, uint8_t *data)
{
av_frame_free((AVFrame **)data);
av_free(data);
}
static int write_uncoded_frame_internal(AVFormatContext *s, int stream_index,
AVFrame *frame, int interleaved)
2013-12-31 16:09:48 +03:00
{
AVPacket pkt, *pktp;
av_assert0(s->oformat);
avformat/mux: Make uncoded frames av_packet_unref() compatible Currently uncoded frames (i.e. packets whose data actually points to an AVFrame) are not refcounted. As a consequence, calling av_packet_unref() on them will not free them, but may simply make sure that they leak by losing the pointer to the frame. This commit changes this by actually making uncoded frames refcounted. In order not to rely on sizeof(AVFrame) (which is not part of the public API and so must not be used here in libavformat) the packet's data is changed to a (padded) buffer containing just a pointer to an AVFrame. Said buffer is owned by an AVBuffer with a custom free function that frees the frame as well as the buffer. Thereby the pointer/the AVBuffer owns the AVFrame. Said ownership can actually be transferred by copying and resetting the pointer, as might happen when actually writing the uncoded frames in AVOutputFormat.write_uncoded_frame() (although currently no muxer makes use of this possibility). This makes packets containing uncoded frames compatible with av_packet_unref(). This already has three advantages in interleaved mode: 1. If an error happens at the preparatory steps (before the packet is put into the interleavement queue), the frame is properly freed. 2. If the trailer is never written, the frames still in the interleavement queue will now be properly freed by ff_packet_list_free(). 3. The custom code for moving the packet to the packet list in ff_interleave_add_packet() can be removed. It will also simplify fixing further memleaks in future commits. Suggested-by: Marton Balint <cus@passwd.hu> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-08-09 14:32:15 +02:00
if (!s->oformat->write_uncoded_frame) {
av_frame_free(&frame);
2013-12-31 16:09:48 +03:00
return AVERROR(ENOSYS);
avformat/mux: Make uncoded frames av_packet_unref() compatible Currently uncoded frames (i.e. packets whose data actually points to an AVFrame) are not refcounted. As a consequence, calling av_packet_unref() on them will not free them, but may simply make sure that they leak by losing the pointer to the frame. This commit changes this by actually making uncoded frames refcounted. In order not to rely on sizeof(AVFrame) (which is not part of the public API and so must not be used here in libavformat) the packet's data is changed to a (padded) buffer containing just a pointer to an AVFrame. Said buffer is owned by an AVBuffer with a custom free function that frees the frame as well as the buffer. Thereby the pointer/the AVBuffer owns the AVFrame. Said ownership can actually be transferred by copying and resetting the pointer, as might happen when actually writing the uncoded frames in AVOutputFormat.write_uncoded_frame() (although currently no muxer makes use of this possibility). This makes packets containing uncoded frames compatible with av_packet_unref(). This already has three advantages in interleaved mode: 1. If an error happens at the preparatory steps (before the packet is put into the interleavement queue), the frame is properly freed. 2. If the trailer is never written, the frames still in the interleavement queue will now be properly freed by ff_packet_list_free(). 3. The custom code for moving the packet to the packet list in ff_interleave_add_packet() can be removed. It will also simplify fixing further memleaks in future commits. Suggested-by: Marton Balint <cus@passwd.hu> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-08-09 14:32:15 +02:00
}
2013-12-31 16:09:48 +03:00
if (!frame) {
pktp = NULL;
} else {
avformat/mux: Make uncoded frames av_packet_unref() compatible Currently uncoded frames (i.e. packets whose data actually points to an AVFrame) are not refcounted. As a consequence, calling av_packet_unref() on them will not free them, but may simply make sure that they leak by losing the pointer to the frame. This commit changes this by actually making uncoded frames refcounted. In order not to rely on sizeof(AVFrame) (which is not part of the public API and so must not be used here in libavformat) the packet's data is changed to a (padded) buffer containing just a pointer to an AVFrame. Said buffer is owned by an AVBuffer with a custom free function that frees the frame as well as the buffer. Thereby the pointer/the AVBuffer owns the AVFrame. Said ownership can actually be transferred by copying and resetting the pointer, as might happen when actually writing the uncoded frames in AVOutputFormat.write_uncoded_frame() (although currently no muxer makes use of this possibility). This makes packets containing uncoded frames compatible with av_packet_unref(). This already has three advantages in interleaved mode: 1. If an error happens at the preparatory steps (before the packet is put into the interleavement queue), the frame is properly freed. 2. If the trailer is never written, the frames still in the interleavement queue will now be properly freed by ff_packet_list_free(). 3. The custom code for moving the packet to the packet list in ff_interleave_add_packet() can be removed. It will also simplify fixing further memleaks in future commits. Suggested-by: Marton Balint <cus@passwd.hu> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-08-09 14:32:15 +02:00
size_t bufsize = sizeof(frame) + AV_INPUT_BUFFER_PADDING_SIZE;
AVFrame **framep = av_mallocz(bufsize);
if (!framep)
goto fail;
2013-12-31 16:09:48 +03:00
pktp = &pkt;
av_init_packet(&pkt);
avformat/mux: Make uncoded frames av_packet_unref() compatible Currently uncoded frames (i.e. packets whose data actually points to an AVFrame) are not refcounted. As a consequence, calling av_packet_unref() on them will not free them, but may simply make sure that they leak by losing the pointer to the frame. This commit changes this by actually making uncoded frames refcounted. In order not to rely on sizeof(AVFrame) (which is not part of the public API and so must not be used here in libavformat) the packet's data is changed to a (padded) buffer containing just a pointer to an AVFrame. Said buffer is owned by an AVBuffer with a custom free function that frees the frame as well as the buffer. Thereby the pointer/the AVBuffer owns the AVFrame. Said ownership can actually be transferred by copying and resetting the pointer, as might happen when actually writing the uncoded frames in AVOutputFormat.write_uncoded_frame() (although currently no muxer makes use of this possibility). This makes packets containing uncoded frames compatible with av_packet_unref(). This already has three advantages in interleaved mode: 1. If an error happens at the preparatory steps (before the packet is put into the interleavement queue), the frame is properly freed. 2. If the trailer is never written, the frames still in the interleavement queue will now be properly freed by ff_packet_list_free(). 3. The custom code for moving the packet to the packet list in ff_interleave_add_packet() can be removed. It will also simplify fixing further memleaks in future commits. Suggested-by: Marton Balint <cus@passwd.hu> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-08-09 14:32:15 +02:00
pkt.buf = av_buffer_create((void *)framep, bufsize,
uncoded_frame_free, NULL, 0);
if (!pkt.buf) {
av_free(framep);
fail:
av_frame_free(&frame);
return AVERROR(ENOMEM);
}
*framep = frame;
pkt.data = (void *)framep;
pkt.size = sizeof(frame);
2013-12-31 16:09:48 +03:00
pkt.pts =
pkt.dts = frame->pts;
pkt.duration = frame->pkt_duration;
2013-12-31 16:09:48 +03:00
pkt.stream_index = stream_index;
pkt.flags |= AV_PKT_FLAG_UNCODED_FRAME;
}
avformat/mux: Don't modify packets we don't own The documentation of av_write_frame() explicitly states that the function doesn't take ownership of the packets sent to it; while av_write_frame() does not directly unreference the packets after having written them, it nevertheless modifies the packet in various ways: 1. The timestamps might be modified either by prepare_input_packet() or compute_muxer_pkt_fields(). 2. If a bitstream filter gets applied, it takes ownership of the reference and the side-data in the packet sent to it. In case of do_packet_auto_bsf(), the end result is that the returned packet contains the output of the last bsf in the chain. If an error happens, a blank packet will be returned; a packet may also simply not lead to any output (vp9_superframe). This also implies that side data needs to be really copied and can't be shared with the input packet. The method choosen here minimizes copying of data: When the input isn't refcounted and no bitstream filter is applied, the packet's data will not be copied. Notice that packets that contain uncoded frames are exempt from this because these packets are not owned by and returned to the user. This also moves unreferencing the packets containing uncoded frames to av_write_frame() in the noninterleaved codepath; in the interleaved codepath, these packets are already freed in av_interleaved_write_frame(), so that unreferencing the packets in write_uncoded_frame_internal() is no longer needed. It has been removed. Reviewed-by: Marton Balint <cus@passwd.hu> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
2019-08-13 04:47:25 +02:00
return interleaved ? av_interleaved_write_frame(s, pktp) :
av_write_frame(s, pktp);
2013-12-31 16:09:48 +03:00
}
int av_write_uncoded_frame(AVFormatContext *s, int stream_index,
AVFrame *frame)
{
return write_uncoded_frame_internal(s, stream_index, frame, 0);
2013-12-31 16:09:48 +03:00
}
int av_interleaved_write_uncoded_frame(AVFormatContext *s, int stream_index,
AVFrame *frame)
{
return write_uncoded_frame_internal(s, stream_index, frame, 1);
2013-12-31 16:09:48 +03:00
}
int av_write_uncoded_frame_query(AVFormatContext *s, int stream_index)
{
av_assert0(s->oformat);
if (!s->oformat->write_uncoded_frame)
return AVERROR(ENOSYS);
return s->oformat->write_uncoded_frame(s, stream_index, NULL,
AV_WRITE_UNCODED_FRAME_QUERY);
}