libspeex encoder wraper

taken from svn head of xuggle

configure

@@ -178,7 +178,7 @@ External library support:
   --enable-libopenjpeg     enable JPEG 2000 decoding via OpenJPEG [no]
   --enable-librtmp         enable RTMP[E] support via librtmp [no]
   --enable-libschroedinger enable Dirac support via libschroedinger [no]
-  --enable-libspeex        enable Speex decoding via libspeex [no]
+  --enable-libspeex        enable Speex encoding and decoding via libspeex [no]
   --enable-libtheora       enable Theora encoding via libtheora [no]
   --enable-libvo-aacenc    enable AAC encoding via libvo-aacenc [no]
   --enable-libvo-amrwbenc  enable AMR-WB encoding via libvo-amrwbenc [no]
@@ -1429,6 +1429,7 @@ libopenjpeg_decoder_deps="libopenjpeg"
 libschroedinger_decoder_deps="libschroedinger"
 libschroedinger_encoder_deps="libschroedinger"
 libspeex_decoder_deps="libspeex"
+libspeex_encoder_deps="libspeex"
 libtheora_encoder_deps="libtheora"
 libvo_aacenc_encoder_deps="libvo_aacenc"
 libvo_amrwbenc_encoder_deps="libvo_amrwbenc"

libavcodec/Makefile

@@ -593,6 +593,7 @@ OBJS-$(CONFIG_LIBSCHROEDINGER_ENCODER)    += libschroedingerenc.o \
                                              libschroedinger.o    \
                                              libdirac_libschro.o
 OBJS-$(CONFIG_LIBSPEEX_DECODER)           += libspeexdec.o
+OBJS-$(CONFIG_LIBSPEEX_ENCODER)           += libspeexenc.o
 OBJS-$(CONFIG_LIBTHEORA_ENCODER)          += libtheoraenc.o
 OBJS-$(CONFIG_LIBVO_AACENC_ENCODER)       += libvo-aacenc.o mpeg4audio.o
 OBJS-$(CONFIG_LIBVO_AMRWBENC_ENCODER)     += libvo-amrwbenc.o

libavcodec/allcodecs.c

@@ -381,7 +381,7 @@ void avcodec_register_all(void)
     REGISTER_DECODER (LIBOPENCORE_AMRWB, libopencore_amrwb);
     REGISTER_DECODER (LIBOPENJPEG, libopenjpeg);
     REGISTER_ENCDEC  (LIBSCHROEDINGER, libschroedinger);
-    REGISTER_DECODER (LIBSPEEX, libspeex);
+    REGISTER_ENCDEC  (LIBSPEEX, libspeex);
     REGISTER_ENCODER (LIBTHEORA, libtheora);
     REGISTER_ENCODER (LIBVO_AACENC, libvo_aacenc);
     REGISTER_ENCODER (LIBVO_AMRWBENC, libvo_amrwbenc);

libavcodec/libspeexenc.c

@@ -0,0 +1,178 @@
+/*
+ * Copyright (c) 2009 by Xuggle Incorporated.  All rights reserved.
+ * This file is part of FFmpeg.
+ *
+ * FFmpeg is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * FFmpeg is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with FFmpeg; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <libavcodec/avcodec.h>
+#include <speex/speex.h>
+#include <speex/speex_header.h>
+#include <speex/speex_stereo.h>
+
+typedef struct {
+    SpeexBits bits;
+    void *enc_state;
+    SpeexHeader header;
+} LibSpeexEncContext;
+
+
+static av_cold int libspeex_encode_init(AVCodecContext *avctx)
+{
+    LibSpeexEncContext *s = (LibSpeexEncContext*)avctx->priv_data;
+    const SpeexMode *mode;
+
+    if ((avctx->sample_fmt != SAMPLE_FMT_S16 && avctx->sample_fmt != SAMPLE_FMT_FLT) ||
+            avctx->sample_rate <= 0 ||
+            avctx->channels <= 0 ||
+            avctx->channels > 2)
+    {
+        av_log(avctx, AV_LOG_ERROR, "Unsupported sample format, rate, or channels for speex");
+        return -1;
+    }
+
+    if (avctx->sample_rate <= 8000)
+        mode = &speex_nb_mode;
+    else if (avctx->sample_rate <= 16000)
+        mode = &speex_wb_mode;
+    else
+        mode = &speex_uwb_mode;
+
+    speex_bits_init(&s->bits);
+    s->enc_state = speex_encoder_init(mode);
+    if (!s->enc_state)
+    {
+        av_log(avctx, AV_LOG_ERROR, "could not initialize speex encoder");
+        return -1;
+    }
+
+    // initialize the header
+    speex_init_header(&s->header, avctx->sample_rate,
+            avctx->channels, mode);
+
+    // TODO: It'd be nice to support VBR here, but
+    // I'm uncertain what AVCodecContext options to use
+    // to signal whether to turn it on.
+    if (avctx->flags & CODEC_FLAG_QSCALE) {
+        spx_int32_t quality = 0;
+        // Map global_quality's mpeg 1/2/4 scale into Speex's 0-10 scale
+        if (avctx->global_quality > FF_LAMBDA_MAX)
+            quality = 0; // lowest possible quality
+        else
+            quality = (spx_int32_t)((FF_LAMBDA_MAX-avctx->global_quality)*10.0/FF_LAMBDA_MAX);
+        speex_encoder_ctl(s->enc_state, SPEEX_SET_QUALITY, &quality);
+    } else {
+        // default to CBR
+        if (avctx->bit_rate > 0)
+            speex_encoder_ctl(s->enc_state, SPEEX_SET_BITRATE, &avctx->bit_rate);
+        // otherwise just take the default quality setting
+    }
+    // reset the bit-rate to the actual bit rate speex will use
+    speex_encoder_ctl(s->enc_state, SPEEX_GET_BITRATE, &s->header.bitrate);
+    avctx->bit_rate = s->header.bitrate;
+
+    // get the actual sample rate
+    speex_encoder_ctl(s->enc_state, SPEEX_GET_SAMPLING_RATE, &s->header.rate);
+    avctx->sample_rate = s->header.rate;
+
+    // get the frame-size.  To align with FLV, we're going to put 2 frames
+    // per packet.  If someone can tell me how to make this configurable
+    // from the avcodec contents, I'll mod this so it's not hard-coded.
+    // but without this, FLV files with speex data won't play correctly
+    // in flash player 10.
+    speex_encoder_ctl(s->enc_state, SPEEX_GET_FRAME_SIZE, &s->header.frame_size);
+    s->header.frames_per_packet = 2; // Need for FLV container support
+    avctx->frame_size = s->header.frame_size*s->header.frames_per_packet;
+
+    // and we'll put a speex header packet into extradata so that muxers
+    // can use it.
+    avctx->extradata = speex_header_to_packet(&s->header, &avctx->extradata_size);
+    return 0;
+}
+
+static av_cold int libspeex_encode_frame(
+        AVCodecContext *avctx, uint8_t *frame,
+        int buf_size, void *data)
+{
+    LibSpeexEncContext *s = (LibSpeexEncContext*)avctx->priv_data;
+    int i = 0;
+
+    if (!data)
+        // nothing to flush
+        return 0;
+
+    speex_bits_reset(&s->bits);
+    for(i = 0; i < s->header.frames_per_packet; i++)
+    {
+        if (avctx->sample_fmt == SAMPLE_FMT_FLT)
+        {
+            if (avctx->channels == 2) {
+                speex_encode_stereo(
+                        (float*)data+i*s->header.frame_size,
+                        s->header.frame_size,
+                        &s->bits);
+            }
+            speex_encode(s->enc_state,
+                    (float*)data+i*s->header.frame_size, &s->bits);
+        } else {
+            if (avctx->channels == 2) {
+                speex_encode_stereo_int(
+                        (spx_int16_t*)data+i*s->header.frame_size,
+                        s->header.frame_size,
+                        &s->bits);
+            }
+            speex_encode_int(s->enc_state,
+                    (spx_int16_t*)data+i*s->header.frame_size, &s->bits);
+        }
+    }
+    // put in a terminator so this will fit in a OGG or FLV packet
+    speex_bits_insert_terminator(&s->bits);
+
+    if (buf_size >= speex_bits_nbytes(&s->bits)) {
+        return speex_bits_write(&s->bits, frame, buf_size);
+    } else {
+        av_log(avctx, AV_LOG_ERROR, "output buffer too small");
+        return -1;
+    }
+}
+
+static av_cold int libspeex_encode_close(AVCodecContext *avctx)
+{
+    LibSpeexEncContext *s = (LibSpeexEncContext*)avctx->priv_data;
+
+    speex_bits_destroy(&s->bits);
+    speex_encoder_destroy(s->enc_state);
+    s->enc_state = 0;
+    if (avctx->extradata)
+        speex_header_free(avctx->extradata);
+    avctx->extradata = 0;
+    avctx->extradata_size = 0;
+
+    return 0;
+}
+
+AVCodec ff_libspeex_encoder = {
+    "libspeex",
+    AVMEDIA_TYPE_AUDIO,
+    CODEC_ID_SPEEX,
+    sizeof(LibSpeexEncContext),
+    libspeex_encode_init,
+    libspeex_encode_frame,
+    libspeex_encode_close,
+    0,
+    .capabilities = CODEC_CAP_DELAY,
+    .supported_samplerates = (const int[]){8000, 16000, 32000, 0},
+    .sample_fmts = (enum SampleFormat[]){SAMPLE_FMT_S16,SAMPLE_FMT_FLT,SAMPLE_FMT_NONE},
+    .long_name = NULL_IF_CONFIG_SMALL("libspeex Speex Encoder"),
+};