1
0
mirror of https://github.com/FFmpeg/FFmpeg.git synced 2024-11-21 10:55:51 +02:00

rtpdec_h264: Clean up comments

Split long comments, move long comments at the end of lines to
separate lines above, fix vertical alignment, fix up comment style
(unify trailing dots - comments had a mix of 2, 3 or 4 dots, where
it would be just as good without them at all).

Signed-off-by: Martin Storsjö <martin@martin.st>
This commit is contained in:
Martin Storsjö 2012-05-05 00:05:52 +03:00
parent dee48d095d
commit f3d471f45f

View File

@ -20,7 +20,7 @@
*/
/**
* @file
* @file
* @brief H.264 / RTP Code (RFC3984)
* @author Ryan Martell <rdm4@martellventures.com>
*
@ -29,7 +29,8 @@
* This currently supports packetization mode:
* Single Nal Unit Mode (0), or
* Non-Interleaved Mode (1). It currently does not support
* Interleaved Mode (2). (This requires implementing STAP-B, MTAP16, MTAP24, FU-B packet types)
* Interleaved Mode (2). (This requires implementing STAP-B, MTAP16, MTAP24,
* FU-B packet types)
*/
#include "libavutil/base64.h"
@ -46,7 +47,7 @@
#include "rtpdec_formats.h"
struct PayloadContext {
//sdp setup parameters
// sdp setup parameters
uint8_t profile_idc;
uint8_t profile_iop;
uint8_t level_idc;
@ -68,10 +69,11 @@ static int sdp_parse_fmtp_config_h264(AVStream * stream,
av_log(codec, AV_LOG_DEBUG, "RTP Packetization Mode: %d\n", atoi(value));
h264_data->packetization_mode = atoi(value);
/*
Packetization Mode:
0 or not present: Single NAL mode (Only nals from 1-23 are allowed)
1: Non-interleaved Mode: 1-23, 24 (STAP-A), 28 (FU-A) are allowed.
2: Interleaved Mode: 25 (STAP-B), 26 (MTAP16), 27 (MTAP24), 28 (FU-A), and 29 (FU-B) are allowed.
* Packetization Mode:
* 0 or not present: Single NAL mode (Only nals from 1-23 are allowed)
* 1: Non-interleaved Mode: 1-23, 24 (STAP-A), 28 (FU-A) are allowed.
* 2: Interleaved Mode: 25 (STAP-B), 26 (MTAP16), 27 (MTAP24), 28 (FU-A),
* and 29 (FU-B) are allowed.
*/
if (h264_data->packetization_mode > 1)
av_log(codec, AV_LOG_ERROR,
@ -149,7 +151,7 @@ static int sdp_parse_fmtp_config_h264(AVStream * stream,
return 0;
}
// return 0 on packet, no more left, 1 on packet, 1 on partial packet...
// return 0 on packet, no more left, 1 on packet, 1 on partial packet
static int h264_handle_packet(AVFormatContext *ctx,
PayloadContext *data,
AVStream *st,
@ -173,8 +175,10 @@ static int h264_handle_packet(AVFormatContext *ctx,
assert(data);
assert(buf);
/* Simplify the case (these are all the nal types used internally by
* the h264 codec). */
if (type >= 1 && type <= 23)
type = 1; // simplify the case. (these are all the nal types used internally by the h264 codec)
type = 1;
switch (type) {
case 0: // undefined, but pass them through
case 1:
@ -190,7 +194,7 @@ static int h264_handle_packet(AVFormatContext *ctx,
// consume the STAP-A NAL
buf++;
len--;
// first we are going to figure out the total size....
// first we are going to figure out the total size
{
int pass= 0;
int total_length= 0;
@ -203,13 +207,13 @@ static int h264_handle_packet(AVFormatContext *ctx,
while (src_len > 2) {
uint16_t nal_size = AV_RB16(src);
// consume the length of the aggregate...
// consume the length of the aggregate
src += 2;
src_len -= 2;
if (nal_size <= src_len) {
if(pass==0) {
// counting...
// counting
total_length+= sizeof(start_sequence)+nal_size;
} else {
// copying
@ -227,7 +231,7 @@ static int h264_handle_packet(AVFormatContext *ctx,
"nal size exceeds length: %d %d\n", nal_size, src_len);
}
// eat what we handled...
// eat what we handled
src += nal_size;
src_len -= nal_size;
@ -237,7 +241,8 @@ static int h264_handle_packet(AVFormatContext *ctx,
}
if(pass==0) {
// now we know the total size of the packet (with the start sequences added)
/* now we know the total size of the packet (with the
* start sequences added) */
av_new_packet(pkt, total_length);
dst= pkt->data;
} else {
@ -259,9 +264,9 @@ static int h264_handle_packet(AVFormatContext *ctx,
case 28: // FU-A (fragmented nal)
buf++;
len--; // skip the fu_indicator
len--; // skip the fu_indicator
if (len > 1) {
// these are the same as above, we just redo them here for clarity...
// these are the same as above, we just redo them here for clarity
uint8_t fu_indicator = nal;
uint8_t fu_header = *buf;
uint8_t start_bit = fu_header >> 7;
@ -269,11 +274,13 @@ static int h264_handle_packet(AVFormatContext *ctx,
uint8_t nal_type = (fu_header & 0x1f);
uint8_t reconstructed_nal;
// reconstruct this packet's true nal; only the data follows..
reconstructed_nal = fu_indicator & (0xe0); // the original nal forbidden bit and NRI are stored in this packet's nal;
// Reconstruct this packet's true nal; only the data follows.
/* The original nal forbidden bit and NRI are stored in this
* packet's nal. */
reconstructed_nal = fu_indicator & (0xe0);
reconstructed_nal |= nal_type;
// skip the fu_header...
// skip the fu_header
buf++;
len--;
@ -282,7 +289,7 @@ static int h264_handle_packet(AVFormatContext *ctx,
data->packet_types_received[nal_type]++;
#endif
if(start_bit) {
// copy in the start sequence, and the reconstructed nal....
/* copy in the start sequence, and the reconstructed nal */
av_new_packet(pkt, sizeof(start_sequence)+sizeof(nal)+len);
memcpy(pkt->data, start_sequence, sizeof(start_sequence));
pkt->data[sizeof(start_sequence)]= reconstructed_nal;
@ -347,7 +354,7 @@ static int parse_h264_sdp_line(AVFormatContext *s, int st_index,
char buf1[50];
char *dst = buf1;
// remove the protocol identifier..
// remove the protocol identifier
while (*p && *p == ' ') p++; // strip spaces.
while (*p && *p != ' ') p++; // eat protocol identifier
while (*p && *p == ' ') p++; // strip trailing spaces.
@ -357,7 +364,7 @@ static int parse_h264_sdp_line(AVFormatContext *s, int st_index,
*dst = '\0';
// a='framesize:96 320-240'
// set our parameters..
// set our parameters
codec->width = atoi(buf1);
codec->height = atoi(p + 1); // skip the -
codec->pix_fmt = PIX_FMT_YUV420P;