* commit 'ce5870a3a8f2b10668ee4f04c2ae0287f66f31b2':
cbs: Refcount all the things!
Some changes for bitstream API.
Merged-by: Mark Thompson <sw@jkqxz.net>
This makes it easier for users of the CBS API to get alloc/free right -
all subelements use the buffer API so that it's clear how to free them.
It also allows eliding some redundant copies: the packet -> fragment copy
disappears after this change if the input packet is refcounted, and more
codec-specific cases are now possible (but not included in this patch).
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Merges Libav commit 47687a2f8aca3f65b6fdd117b1cb66a7409a7fd1.
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This should refer to the existing SPS structure, not the VAAPI sequence
parameter buffer (which is not yet initialised).
From ffmpeg commit f31478ba1472afe5c1eed60f219ae331816425a2.
Signed-off-by: Mark Thompson <sw@jkqxz.net>
* commit 'ff007e30d8d45ba1ff2b2a4615f1cd5bafb50626':
vaapi_h264: Add workaround for bad SEI in old Intel drivers
Merged-by: Mark Thompson <sw@jkqxz.net>
With pre-2.0 Intel drivers in CBR mode, if an explicit SEI message with
the old (now deprecated) type is not included, the driver generates and
inserts some timing SEI which is almost certainly invlaid. Before
7a4fac5e91789b73e07bd4ad20493cfde028df76 we always inserted our own SEI
so this would not be visible, but since then it has been possible to
disable that. We would also like to avoid using the deprecated type,
and using the new type, while working in old drivers, does not suppress
the spurious message like the old type does.
Therefore, suppress the bad SEI insertion by providing a zero-length
buffer with the old type, which the driver can insert harmlessly.
This has been deprecated in libva2 because hardware does not and will not
support it. Therefore never consider it for decode, and for encode assume
the user meant constrained baseline profile instead.
This should refer to the existing SPS structure, not the VAAPI sequence
parameter buffer (which is not yet initialised).
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Wang, Yi A <yi.a.wang@intel.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
This should be ticks, not time_scale steps - it was wrong for all
framerates not a multiple of 1/2.
(cherry picked from commit 30645174e333c7db1946ab09be769db9be9d7481)
This has been deprecated in libva2 because hardware does not and will not
support it. Therefore never consider it for decode, and for encode assume
the user meant constrained baseline profile instead.
This avoids confusion with equivalent H.265 SEI values when both are
being used at the same time.
(cherry picked from commit 6ea220cbeec8863e2006a03b73bed52db2b13ee7)
Follow libx264 style to support "coder" option, and set it to
cabac by default.
Signed-off-by: Yi A Wang <yi.a.wang@intel.com>
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
Use AVCodecContext.compression_level rather than a private option,
replacing the H.264-specific quality option (which stays only for
compatibility).
This now works with the H.265 encoder in the i965 driver, as well as
the existing cases with the H.264 encoder.
(cherry picked from commit 19388a7200e5d99c703271f05dba1c806720e808)
Use AVCodecContext.compression_level rather than a private option,
replacing the H.264-specific quality option (which stays only for
compatibility).
This now works with the H.265 encoder in the i965 driver, as well as
the existing cases with the H.264 encoder.
The non-H.26[45] codecs already use this form. Since we don't
currently generate I frames for codecs which support them separately
to IDR, the p_per_i variable is set to infinity by default so that it
doesn't interfere with any other calculation. (All the code for I
frames still exists, and it works for H.264 if set manually.)
(cherry picked from commit 6af014f4028238b4c50f1731b3369a41d65fa9c4)
The non-H.26[45] codecs already use this form. Since we don't
currently generate I frames for codecs which support them separately
to IDR, the p_per_i variable is set to infinity by default so that it
doesn't interfere with any other calculation. (All the code for I
frames still exists, and it works for H.264 if set manually.)
Default to using VBR when a target bitrate is set, unless the max rate
is also set and matches the target. Changes to the Intel driver mean
that min_qp is also respected in this case, so set a codec default to
unset the value rather than using the current default inherited from
the MPEG-4 part 2 encoder.
(cherry picked from commit eddfb57210298a0a94472794485400a3a6c76196)
Before this change, it was possible to overflow pic_order_cnt_lsb and
generate a stream with invalid POC numbering. This makes sure that
the field is large enough that a single IDR B* P sequence uses fewer
than half the available POC lsb values.
(cherry picked from commit 89725a8512721fffd190021ded2d3f5b42e20e2a)
Default to using VBR when a target bitrate is set, unless the max rate
is also set and matches the target. Changes to the Intel driver mean
that min_qp is also respected in this case, so set a codec default to
unset the value rather than using the current default inherited from
the MPEG-4 part 2 encoder.
Before this change, it was possible to overflow pic_order_cnt_lsb and
generate a stream with invalid POC numbering. This makes sure that
the field is large enough that a single IDR B* P sequence uses fewer
than half the available POC lsb values.
Disable B frames when using baseline/constrained baseline profile,
following H.264 spec Annex A.2.1.
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Yi A Wang <yi.a.wang@intel.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
In H.264 section 8.2.1, we have that "The bitstream shall not contain
data that result in Min(TopFieldOrderCnt, BottomFieldOrderCnt) not
equal to 0 for a coded IDR frame". This fixes the encoder to always
conform to this - previously the POC values formed an unbroken
sequence, not resetting to zero on IDR frames.
Signed-off-by: Mark Thompson <sw@jkqxz.net>
when meeting IDR frame, vaapi_encode_h264 poc number don't reset, now fix
this issue based on h264 spec. Some decoder don't care this case, but this
fix will enhance the encoder action. Before this fix, poc number is
negative in some case.
Reviewed-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Wang, Yi A <yi.a.wang@intel.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
This improves behaviour with drivers which do not support packed
headers, such as AMD VCE on mesa/gallium.
(cherry picked from commit 892bbbcdc171ff0d08d69636a240ffb95f54243c)
This allows better checking of capabilities and will make it easier
to add more functionality later.
It also commonises some duplicated code around rate control setup
and adds more comments explaining the internals.
(cherry picked from commit 80a5d05108cb218e8cd2e25c6621a3bfef0a832e)
There should be an extra offset of 6 on bit_rate_scale and of 4 on
cpb_size_scale which were not accounted for here.
(cherry picked from commit 3a9662af6c741f8354b1ca97642f78f5c02e2e8f)
