Replace the manually specified chroma location by one using standard
notation, arbitrarily "bottomleft" as it is a less common path.
Required if we want to phase out the use of manual chroma locations.
Encoders may emit a buffering period SEI without a corresponding
SPS/PPS if the SPS/PPS is carried out-of-band, eg with avcc.
During Annex B conversion, this may result in the SPS/PPS being
inserted *after* the buffering period SEI but before the IDR NAL.
Since the buffering period SEI references the SPS, the SPS/PPS
needs to come first.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This test confirms that we can write mDCv and cLLi chunks and read them
back via the png decoder. It uses an HEVC conformance sample with this
metadata as the base source for the side data in the frames.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Reported-by: Jan Ekström <jeebjp@gmail.com>
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This lets us detect when a container has flagged a stream as multilayer.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Do not pass an options dictionary to the avcodec_open2() in enc_open().
This is cleaner and more robust, as previously various bits of code
would try to interpret the contents of the options dictionary, with
varying degrees of correctness. Now they can just access the encoder
AVCodecContext directly.
Cf. 372c78dd42f2b1ca743473b9c32fad71c65919e0 - analogous change for
decoding.
A non-progressive field order is now written on the container level in
interlaced ProRes encoding tests.
Perform av_clip_int16(val) _after_ copying the value to last_dc.
This change ensures that clipping is applied only within the context of
the current block, preventing the propagation of clipped values to
subsequent DC components.
Related commits: c28f648b19d and dffae122d0f
Related ticket: 4683
This avoids hardcoding any implementation-specific limitiations as
part of the API, and allows for future expandability.
This also allows API users to more conveniently convert the
values into floats without hardcoding specific conversion constants.
The API was committed a few days ago, so changing this field now
is within the realms of acceptable.
p0_10.j2k is one of the reference codestreams included in Rec. ITU-T T.803 | ISO/IEC 15444-4.
Adding this test was made possible by commit 6f4a95cfb8e6ed97fdd1027251181caded44860f.
This allows ending up with a normal, non-fragmented file when
the file is finished, while keeping the file readable if writing
is aborted abruptly at any point. (Normally when writing a
mov/mp4 file, the unfinished file is completely useless unless it
is finished properly.)
This results in a file where the mdat atom contains (and hides)
all the moof atoms that were part of the fragmented file structure
initially.
Signed-off-by: Martin Storsjö <martin@martin.st>
ffprobe is meant to generate parseable output, and if a field is present, it
should be printed even if it has a default value.
Signed-off-by: James Almer <jamrial@gmail.com>
These tables are supposed to contain the number of bits needed
to encode a given (run, level) pair. Yet the number of bits
for pairs needing the escape code was wrong (it only contained
the escape code and not the bits needed for run and level).
Furthermore, H.261 (a format with explicit end-of-block codes)
does not work well together with the RLTable API from rl.c:
The EOB code is the first one in ff_h261_rl_tcoeff's VLC table
and has a run value of zero. Therefore the result of get_rl_index()
is off by one for run == 0 and level values with explicit
(run, level) pair.
Fixing this necessitated changing the ref files of the
vsynth*-h261-trellis tests. Both filesizes as well as PSNR
decreased. If one used a qscale value of 11 for this test,
one would have received files with about the same size as
before this patch (with qscale 12), but with better PSNR.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Before After
-------------------------------------------------
make fate-vvc CPU Time (No ASM) 131.52s 134.83s
libavcodec/vvc/* Line Coverage 95.3% 96.9%
inter_template.c Line Coverage 74.3% 88.2%
inter.c Line Coverage 85.3% 99.2%
Signed-off-by: Frank Plowman <post@frankplowman.com>
Also make the iso_channel_position table consistent with what the AAC decoder
uses in avcodec/aac/aacdec_usac.c.
Fate changes are caused by the change of how 7.1 layout is mapped, previously
it included Side Surround channels, now it includes the Surround channels.
Signed-off-by: Marton Balint <cus@passwd.hu>
Due to hysterical raisins, most RISC-V Linux distributions target a
RV64GC baseline excluding the Bit-manipulation ISA extensions, most
notably:
- Zba: address generation extension and
- Zbb: basic bit manipulation extension.
Most CPUs that would make sense to run FFmpeg on support Zba and Zbb
(including the current FATE runner), so it makes sense to optimise for
them. In fact a large chunk of existing assembler optimisations relies
on Zba and/or Zbb.
Since we cannot patch shared library code, the next best thing is to
carry a flag initialised at load-time and check it on need basis.
This results in 3 instructions overhead on isolated use, e.g.:
1: AUIPC rd, %pcrel_hi(ff_rv_zbb_supported)
LBU rd, %pcrel_lo(1b)(rd)
BEQZ rd, non_Zbb_fallback_code
// Zbb code here
The C compiler will typically load the flag ahead of time to reducing
latency, and can also keep it around if Zbb is used multiple times in a
single optimisation scope. For this to work, the flag symbol must be
hidden; otherwise the optimisation degrades with a GOT look-up to
support interposition:
1: AUIPC rd, GOT_OFFSET_HI
LD rd, GOT_OFFSET_LO(rd)
LBU rd, (rd)
BEQZ rd, non_Zbb_fallback_code
// Zbb code here
This patch adds code to provision the flag in libraries using bit
manipulation functions from libavutil: byte-swap, bit-weight and
counting leading or trailing zeroes.
Instead of an ad-hoc scheme. Also, combine skipping RASL frames with
skip_frame handling - current code seems flawed as it only executes for
the first slice of a RASL frame and unnecessarily unsets is_decoded,
which should not be set at this point anyway..
Some RASL frames in fate-hevc-afd-tc-sei that were previously discarded
are now output.
There is no benefit in using it: The fast path of copying
is not taken because of misalignment; furthermore we are
only dealing with a few byte here anyway, so simply copy
the bytes manually, avoiding the dependency on bitstream.c
in lavf (which also contains a function that is completely
unused in lavf).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
A 360 video specific tool
see https://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=9503377
passed files:
DMVR_A_Huawei_3.bit
WRAP_D_InterDigital_4.bit
WRAP_A_InterDigital_4.bit
WRAP_B_InterDigital_4.bit
WRAP_C_InterDigital_4.bit
ERP_A_MediaTek_3.bit
Several files already had standard license header (namely
2-clause BSD files), yet due to the 80 char line length limit,
they were not treated as such by source-check.sh (which
fate-source uses). Therefore relax the BSD check.
Reviewed-by: Rémi Denis-Courmont <remi@remlab.net>
Reviewed-by: Pierre-Anthony Lemieux <pal@sandflow.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This commit is the analog of 3f11eac75741888c7b2b6f93c458766f2613bab5
for decoding: It sets the AV_FRAME_FLAG_KEY and (for video decoders)
also pict_type to AV_PICTURE_TYPE_I. It furthermore stops setting
audio frames as always being key frames -- it is wrong for e.g.
TrueHD/MLP. The latter also affects TAK and DFPWM.
The change already improves output for several decoders where
it has been forgotten to set e.g. pict_type like speedhq, wnv1
or tiff. The latter is the reason for the change to the exif-image-tiff
FATE test reference file.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In direct_search() and ff_estimate_b_frame_motion(), penalty_factor
would be used before being initialized in estimate_motion_b(). Also,
the initialization would happen more than once unnecessarily.
