PGMYUV seems to be always limited range. This was a format originally
invented by FFmpeg at a time when YUVJ distinguished limited from full
range YUV, and this codec never appeared to output YUVJ in any
circumstance, so hard-coding limited range preserves the status quo.
The other formats are explicitly documented to be full range RGB/gray
formats. That said, don't tag them yet, due to outstanding bugs w.r.t
grayscale formats and color range handling.
This change in behavior updates a bunch of FATE tests in trivial ways
(added tagging being the only difference).
Writing the duration SimpleTag is special: It's size is
reserved in advance via an EBML Void element (if seekable)
and this reserved space is overwritten when writing the trailer;
it does not use put_ebml_string().
The string to write is created via snprintf on a buffer
of size 20; this buffer is then written via put_ebml_binary()
with a size of 20.
EBML strings need not be zero-terminated; if not, they
are implicitly terminated by the element's length field.
snprintf() always zero-terminates the buffer, i.e.
the last byte can be discarded when using an EBML string.
This patch does this.
The FATE changes are as expected: One byte saved for every
track; the only exception is the matroska-qt-mode test:
An additional byte is saved because an additional byte
could be saved from the enclosing Tags length field.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Do it only for video (the only thing for type for which HDR10+
makes sense).
This effectively reverts changes to several FATE ref-files
made in bda44f0f39.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Stop using InputStream.dts for generating missing timestamps for decoded
frames, because it contains pre-decoding timestamps and there may be
arbitrary amount of delay between input packets and output frames (e.g.
dependent on the thread count when frame threading is used). It is also
in AV_TIME_BASE (i.e. microseconds), which may introduce unnecessary
rounding issues.
New code maintains a timebase that is the inverse of the LCM of all the
samplerates seen so far, and thus can accurately represent every audio
sample. This timebase is used to generate missing timestamps after
decoding.
Changes the result of the following FATE tests
* pcm_dvd-16-5.1-96000
* lavf-smjpeg
* adpcm-ima-smjpeg
In all of these the timestamps now better correspond to actual frame
durations.
Remove now-obsolete code setting packet durations pre-muxing for CFR
encoded video.
Changes output in the following FATE tests:
* numerous adpcm tests
* ffmpeg-filter_complex_audio
* lavf-asf
* lavf-mkv
* lavf-mkv_attachment
* matroska-encoding-delay
All of these change due to the fact that the output duration is now
the actual input data duration and does not include padding added by
the encoder.
* apng-osample: less wrong packet durations are now passed to the muxer.
They are not entirely correct, because the first frame duration should
be 3 rather than 2. This is caused by the vsync code and should be
addressed later, but this change is a step in the right direction.
* tscc2-mov: last output frame has a duration of 11 rather than 1 - this
corresponds to the duration actually returned by the demuxer.
* film-cvid: video frame durations are now 2 rather than 1 - this
corresponds to durations actually returned by the demuxer and matches
the timestamps.
* mpeg2-ticket6677: durations of some video frames are now 2 rather than
1 - this matches the timestamps.
According to MXF specs the Stored Rectangle corresponds to the data which is
passed to the compressor and received from the decompressor, so they should
contain the width / height extended to the macroblock boundary.
In practice however width and height values rounded to the upper 16 multiples
are only seen when muxing MPEG formats. Therefore this patch changes stored
width and height values to unrounded for all non-MPEG formats, even macroblock
based ones.
For DNXHD the specs (ST 2019-4) explicitly indicates to use 1080 for 1088p.
For ProRes the specs (RDD 44) only refer to to ST 377-1 without precision but
no known commercial implementations are using rounded values.
DV is not using 16x16 macroblocks, so 16 rounding makes no sense.
The patch also fixes Sampled Width / Display Width to use unrounded values.
Signed-off-by: Marton Balint <cus@passwd.hu>
Commit 18f24527eb accidentally made side data only packets be handled like a
flush request. Fix this regression by effectively ignoring them as was the
original intention.
Signed-off-by: James Almer <jamrial@gmail.com>
Some encoders, like flac, can send side data only packets at the end.
Eventually, said extradata update should ideally be used to update the header
when writting to seekable output, but for now, ignore them.
Should fix the undefined behavior of passing NULL to memcpy().
Signed-off-by: James Almer <jamrial@gmail.com>
PFM (aka Portable FloatMap) encodes its scanlines from bottom-to-top,
not from top-to-bottom, unlike other NetPBM formats. Without this
patch, FFmpeg ignores this exception and decodes/encodes PFM images
mirrored vertically from their proper orientation.
For reference, see the NetPBM tool pfmtopam, which encodes a .pam
from a .pfm, using the correct orientation (and which FFmpeg reads
correctly). Also compare ffplay to magick display, which shows the
correct orientation as well.
See: http://www.pauldebevec.com/Research/HDR/PFM/ and see:
https://netpbm.sourceforge.net/doc/pfm.html for descriptions of this
image format.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: James Almer <jamrial@gmail.com>
The data in SGI images is stored planar, so exporting
it via planar pixel formats is natural.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The field is not specific to Opus.
The mp2fixed encoder signals initial_padding and is used
by both the matroska-encoding-delay test as well as
the lavf-mkv tests which necessitated several FATE ref changes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The function contains only two assignments, setting DVVideoContext.avctx
and AVCodecContext.chroma_sample_location. However, the decoder does not
use the former, and the encoder should not be setting the latter.
Therefore move the first assignment to dvenc and the second to dvdec.
Make the encoder warn if the user-signalled chroma sample location does
not match the supported one, and return an error on higher compliance
levels.
The generated files are endian-dependent, so no checksums
may be part of the ref files.
Fixes ticket #9854.
Tested-by: Sebastian Ramacher <sramacher@debian.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The output file (even the filesize) of the recently added
EXR tests depends on the endianness; therefore checksums
of these files must not be part of the ref file. Therefore
this commit adds an option (unused for now) to disable these
checksums on a per-test basis.
In order to avoid having to check twice, the checksum and
the filesize info are moved to immediately follow one another;
this results into updates to the ref files of all lavf-image tests.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible by using a dynamic buffer to write them;
said dynamic buffer is (re)used and reset as appropriate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The output of this test is just a file containing the positions
of peaks; it is not a wave file and trying to demux it just
returns AVERROR_INVALIDDATA; said error has just been ignored
as the return value from do_avconv_crc is the return value from echo.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also check the (user-provided) tags for being overlong; the earlier
code had an implicit unchecked size_t->int conversion.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The values for the essence element type were updated in the spec
from 0x05/0x06 (ST2019-4 2008) to 0x0C/0x0D (ST2019-4 2009).
Fixes ticket #6380.
Thanks-to: Philip de Nier <philip.denier@bbc.co.uk>
Thanks-to: Matthieu Bouron <matthieu.bouron@gmail.com>
Reviewed-by: Matthieu Bouron <matthieu.bouron@gmail.com>
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Nicolas Gaullier <nicolas.gaullier@cji.paris>
Signed-off-by: Marton Balint <cus@passwd.hu>
Up until now, the Matroska muxer did not use the dispositions it is
given as-is; instead it by default overrode the disposition of the first
track of a kind (audio, video, subtitles) if no track of this kind has
the default disposition set. And up until recently, it also enforced
by default that no more than one track of each kind be marked as
default.
The rationale for the former is that there are lots of containers which
lack the concept of default streams, so that it is not uncommon for no
stream to be marked as default at all; the rationale for the latter was
that up until recently, it was dubious whether the Matroska specification
allowed more than one default stream for track type (e.g. mkvmerge
disallowed it). It was this point which led to the implementation of
the above mentioned behaviour inspired by mkvmerge.
Yet the Matroska specifications have changed and now explicitly allow
to set more than one track of each type as default, so that the main
reason of not using the dispositions as-is was rendered moot. Therefore
this commit changes the default to pass the disposition through.
The matroska-mpegts-remux FATE-test has been updated to still use the
old "infer" mode so that it is still covered by FATE; the
matroska-zero-length-block test has also been updated to cover
the infer_no_subs mode. The references for lots of other FATE tests
needed to be updated because of a newly added FlagDefault element with
value zero (whereas a FlagDefault with value 1 needn't be coded at all,
as it coincided with the default value of said element).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There is a minor bug in xbm encode which adds a trailing comma at the end
of data. This isn't a big problem, but it would be nicer to be more
technically true to an array of data (by not including the last comma).
This bug fixes the output from something like this (having 4 values):
static unsigned char image_bits[] = { 0x00, 0x11, 0x22, }
to C code that looks like this instead (having 3 values):
static unsigned char image_bits[] = { 0x00, 0x11, 0x22 }
which is the intended results.
Subject: [PATCH 1/3] avcodec/xbmenc: Do not add last comma into output array
xbm outputs c arrays of data.
Including a comma at the end means there is another value to be added.
This bug fix changes something like this:
static unsigned char image_bits[] = { 0x00, 0x11, 0x22, }
to C code like this:
static unsigned char image_bits[] = { 0x00, 0x11, 0x22 }
Signed-off-by: Joe Da Silva <digital@joescat.com>
The AC3 encoder used to be a separate library called "Aften", which
got merged into libavcodec (literally, SVN commits and all).
The merge preserved as much features from the library as possible.
The code had two versions - a fixed point version and a floating
point version. FFmpeg had floating point DSP code used by other
codecs, the AC3 decoder including, so the floating-point DSP was
simply replaced with FFmpeg's own functions.
However, FFmpeg had no fixed-point audio code at that point. So
the encoder brought along its own fixed-point DSP functions,
including a fixed-point MDCT.
The fixed-point MDCT itself is trivially just a float MDCT with a
different type and each multiply being a fixed-point multiply.
So over time, it got refactored, and the FFT used for all other codecs
was templated.
Due to design decisions at the time, the fixed-point version of the
encoder operates at 16-bits of precision. Although convenient, this,
even at the time, was inadequate and inefficient. The encoder is noisy,
does not produce output comparable to the float encoder, and even
rings at higher frequencies due to the badly approximated winow function.
Enter MIPS (owned by Imagination Technologies at the time). They wanted
quick fixed-point decoding on their FPUless cores. So they contributed
patches to template the AC3 decoder so it had both a fixed-point
and a floating-point version. They also did the same for the AAC decoder.
They however, used 32-bit samples. Not 16-bits. And we did not have
32-bit fixed-point DSP functions, including an MDCT. But instead of
templating our MDCT to output 3 versions (float, 32-bit fixed and 16-bit fixed),
they simply copy-pasted their own MDCT into ours, and completely
ifdeffed our own MDCT code out if a 32-bit fixed point MDCT was selected.
This is also the status quo nowadays - 2 separate MDCTs, one which
produces floating point and 16-bit fixed point versions, and one
sort-of integrated which produces 32-bit MDCT.
MIPS weren't all that interested in encoding, so they left the encoder
as-is, and they didn't care much about the ifdeffery, mess or quality - it's
not their problem.
So the MDCT/FFT code has always been a thorn in anyone looking to clean up
code's eye.
Backstory over. Internally AC3 operates on 25-bit fixed-point coefficients.
So for the floating point version, the encoder simply runs the float MDCT,
and converts the resulting coefficients to 25-bit fixed-point, as AC3 is inherently
a fixed-point codec. For the fixed-point version, the input is 16-bit samples,
so to maximize precision the frame samples are analyzed and the highest set
bit is detected via ac3_max_msb_abs_int16(), and the coefficients are then
scaled up via ac3_lshift_int16(), so the input for the FFT is always at least 14 bits,
computed in normalize_samples(). After FFT, the coefficients are scaled up to 25 bits.
This patch simply changes the encoder to accept 32-bit samples, reusing
the already well-optimized 32-bit MDCT code, allowing us to clean up and drop
a large part of a very messy code of ours, as well as prepare for the future lavu/tx
conversion. The coefficients are simply scaled down to 25 bits during windowing,
skipping 2 separate scalings, as the hacks to extend precision are simply no longer
necessary. There's no point in running the MDCT always at 32 bits when you're
going to drop 6 bits off anyway, the headroom is plenty, and the MDCT rounds
properly.
This also makes the encoder even slightly more accurate over the float version,
as there's no coefficient conversion step necessary.
SIZE SAVINGS:
ARM32:
HARDCODED TABLES:
BASE - 10709590
DROP DSP - 10702872 - diff: -6.56KiB
DROP MDCT - 10667932 - diff: -34.12KiB - both: -40.68KiB
DROP FFT - 10336652 - diff: -323.52KiB - all: -364.20KiB
SOFTCODED TABLES:
BASE - 9685096
DROP DSP - 9678378 - diff: -6.56KiB
DROP MDCT - 9643466 - diff: -34.09KiB - both: -40.65KiB
DROP FFT - 9573918 - diff: -67.92KiB - all: -108.57KiB
ARM64:
HARDCODED TABLES:
BASE - 14641112
DROP DSP - 14633806 - diff: -7.13KiB
DROP MDCT - 14604812 - diff: -28.31KiB - both: -35.45KiB
DROP FFT - 14286826 - diff: -310.53KiB - all: -345.98KiB
SOFTCODED TABLES:
BASE - 13636238
DROP DSP - 13628932 - diff: -7.13KiB
DROP MDCT - 13599866 - diff: -28.38KiB - both: -35.52KiB
DROP FFT - 13542080 - diff: -56.43KiB - all: -91.95KiB
x86:
HARDCODED TABLES:
BASE - 12367336
DROP DSP - 12354698 - diff: -12.34KiB
DROP MDCT - 12331024 - diff: -23.12KiB - both: -35.46KiB
DROP FFT - 12029788 - diff: -294.18KiB - all: -329.64KiB
SOFTCODED TABLES:
BASE - 11358094
DROP DSP - 11345456 - diff: -12.34KiB
DROP MDCT - 11321742 - diff: -23.16KiB - both: -35.50KiB
DROP FFT - 11276946 - diff: -43.75KiB - all: -79.25KiB
PERFORMANCE (10min random s32le):
ARM32 - before - 39.9x - 0m15.046s
ARM32 - after - 28.2x - 0m21.525s
Speed: -30%
ARM64 - before - 36.1x - 0m16.637s
ARM64 - after - 36.0x - 0m16.727s
Speed: -0.5%
x86 - before - 184x - 0m3.277s
x86 - after - 190x - 0m3.187s
Speed: +3%
We now have the possibility of getting AVFrames here, and we should
not touch the muxer's codecpar after writing the header.
Results of FATE tests change as the MXF and Matroska muxers actually
write down the field/frame coding type of a stream in their
respective headers. Before this change, these values in codecpar
would only be set after the muxer was initialized. Now, the
information is also available for encoder and muxer initialization.
Additionally, reap the first rewards by being able to set the
color related encoding values based on the passed AVFrame.
The only tests that seem to have changed their results with this
change seem to be the MXF tests. There, the muxer writes the
limited/full range flag to the output container if the encoder
is not set to "unspecified".
If the average bit rate cannot be calculated, such as in the case
of streamed fragmented mp4, utilize various available parameters
in priority order.
Tests are updated where the esds or btrt or ISML manifest boxes'
output changes.
This is utilized by various media ingests to figure out the bit
rate of the content you are pushing towards it, so write it for
video, audio and subtitle tracks in case at least one nonzero value
is available. It is only mentioned for timed metadata sample
descriptions in QTFF, so limit it only to ISOBMFF (MODE_MP4) mode.
Updates the FATE tests which have their results changed due to the
20 extra bytes being written per track.
