As long as ff_mpeg12_common_init() existed in mpeg12.c,
it added a dependency of mpeg12.o on mpegvideodata.o
(which provides ff_mpeg2_dc_scale_table, which is used
in ff_mpeg12_common_init()). mpegvideodata.o is normally
provided by the mpegvideo subsystem and therefore several
codecs and the MPEG-1/2 parser added a configure dependency
on said subsystem (additionally, the eatqi decoder just
added a Makefile dependency on mpegvideodata.o).
Given that ff_mpeg12_common_init() is no more, these dependencies
can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It only sets [yc]_dc_scale_table and these tables are only
read in ff_set_qscale(); but the MPEG-1/2 decoders don't call
ff_set_qscale() at all.
(Furthermore, given that intra_dc_precision is always zero
for a decoder at this point, ff_mpeg12_common_init()
actually set these pointers to what ff_mpv_common_defaults()
already set them.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is better place for these declarations than
mpeg12data.h as RL VLC are just a variant of VLCs.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Starting with an h264 implementation. Can be extended to support other codecs.
A few caveats:
- OpenGOP streams are currently not supported. The firt packet must be an IDR
frame.
- In some streams, a few frames at the end may not get a reordered PTS when
they reference frames past EOS. The code added to derive timestamps from
previous frames needs to extended.
Addresses ticket #502.
Signed-off-by: James Almer <jamrial@gmail.com>
Provide optimized implementation for vsse_intra8 for arm64.
Performance tests are shown below.
- vsse_5_c: 87.7
- vsse_5_neon: 26.2
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Co-authored-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide optimized implementation of vsse8 for arm64.
Performance comparison tests are shown below.
- vsse_1_c: 141.5
- vsse_1_neon: 32.5
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Add vectorized implementation of nsse8 function.
Performance comparison tests are shown below.
- nsse_1_c: 256.0
- nsse_1_neon: 82.7
Benchmarks and tests run with checkasm tool on AWS Graviton 3.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide optimized implementation of pix_abs8 function for arm64.
Performance comparison tests are shown below:
pix_abs_1_1_c: 162.5
pix_abs_1_1_neon: 27.0
pix_abs_1_2_c: 174.0
pix_abs_1_2_neon: 23.5
pix_abs_1_3_c: 203.2
pix_abs_1_3_neon: 34.7
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Co-authored-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Apparently this option was intended (the context contains a
currently-unused frame_rate field), but was never added. This results in
the output timebase being unset after config_output(), so the input
audio timebase ends up being used for video output, which is clearly
wrong.
Add an option for setting output video framerate. Also set output frame
durations.
It has been deprecated in favor of the aresample filter for almost 10
years.
Another thing this option can do is drop audio timestamps and have them
generated by the encoding code or the muxer, but
- for encoding, this can already be done with the setpts filter
- for muxing this should almost never be done as timestamp generation by
the muxer is deprecated, but people who really want to do this can use
the setts bitstream filter
The butterflies_fixed function pointer declaration specifies av_restrict
for the first two pointer arguments. So the corresponding function
definitions should honor this declaration.
MSVC emits warning C4113 for this.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Users can't make anything with its content.
Making it opaque might allow us to avoid one level of indirection.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
vorbis.h currently contains stuff only used by the native
Vorbis codecs and some Vorbis tables, which are also used by
Opus and libvorbis. Therefore split the data out into a header
of its own.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Don't increment back_frame if it does not correspond
to a real buffer. To do this, handle copying from
the back frame separately from the "use coded value"
codepath; also use memcpy for the former, as the
chunks here are typically worth it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This check is intended to be avoid buffer overflows,
yet there are four problems with it:
1. It has an in-built off-by-one error: len == out_end - out
is perfectly fine and nothing to worry about.
This off-by-one error led to the pixel in the lower-right corner
not being set properly for the back frame of the sample from
the rl2 FATE-test. This pixel is copied to every frame which
is the reason for the update to the reference file of said test.
With this patch, the output of the decoder matches the output
as captured from the reference decoder* (apart from the fact
that said reference somehow lacks the top part of the frame
(copied over from the background frame)).
2. Given that the stride of the buffer may be different
from the width of the video (despite one pixel taking one byte),
there is a second check lateron making the first check redundant
(if one returns immediately; a simple break at the second check
is not sufficient, because it only exits the inner loop).
3. The check is based around the assumption of the stride being
positive (it has this in common with the other check which
will be fixed in a future commit).
4. Even after fixing the off-by-one error, the check in
question is still triggered by all the non-background frames
in the FATE sample as well as by A1100100.RL2. In all these
cases, they use len == 255 and val == 128. For videos with
background frame this just means "copy from the background
frame", which would be done anyway lateron.* Yet for videos
without it copying it is necessary to avoid leaving
uninitialized parts in the video.
*: Available in https://samples.mplayerhq.hu/game-formats/voyeur-rl2/
**: Due to this, the code that copies the rest from the
back frame is no longer executed for any of the samples
available on the sample server. Given that these are only
the files from the demo version of this game, I don't know
whether this code is executed for any file in existence or not.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is only used by three of the thirty files that (potentially
indirectly) include mpeg4audio.h. Twenty of these files won't
have a put_bits.h inclusion any more after this patch.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This allows av_mediacodec_release_buffer to be called safely after
the decoder is closed, this was already the case with delay_flush=1.
Note that this causes holding onto frames to keep the decoding context
alive which is generally considered to be the intended behavior.
Signed-off-by: sfan5 <sfan5@live.de>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Namely to lavu/tests/pixelutils.c. This way, this function will
not be included into actual binaries any more.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Instead use av_pix_fmt_desc_next(). It is still possible
to check its return values by comparing it with the
(currently) expected values and the code does so.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
