When sidx box support is enabled, the code will skip reading all
trun boxes (each containing ctts entries for samples inthat box).
If seeks are attempted before all ctts values are known, the old
code would dump ctts entries into the wrong location. These are
then used to compute pts values which leads to out of order and
incorrectly timestamped packets.
This patch fixes ctts processing by always using the index returned
by av_add_index_entry() as the ctts_data index. When the index gains
new entries old values are reshuffled as appropriate.
This approach makes sense since the mov demuxer is already relying
on the mapping of AVIndex entries to samples for correct demuxing.
As a result of this all ctts entries are now 1-count. A followup
change will be submitted to remove support for > 1 count entries
which will simplify seeking.
Notes for future improvement:
Probably there are other boxes (stts, stsc, etc) that are impacted
by this issue... this patch only attempts to fix ctts since it
completely breaks packet timestamping.
This patch continues using an array for the ctts data, which is not
the most ideal given the rearrangement that needs to happen (via
memmove as new entries are read in). Ideally AVIndex and the ctts
data would be set-type structures so addition is always worst case
O(lg(n)) instead of the O(n^2) that exists now; this slowdown is
noticeable during seeks.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
As it gives excellent encoding gains at an insignificant speed increase
and passes fate without problems, it should now be safe to enable by
default.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Preparation for potentially disabling merged side data by default in the
libs. Do this in particular because it affects fate tests.
The changed tests either reflect added packet side data, or the changed
packet size due to merged side data removal reducing the packet size.
Current code doesn't initialize AVPacket::pos. Made it point to FLVTAG so flv_read_packet can decode from pos
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
We don't currently support values 1 (centimeters), 2 (inches) or 3 (DAR),
only the default value 0 (pixels) which doesn't need to be written.
The fate refs are updated as unknown SAR is now signaled in the output
files with the addition of the new element.
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit 'e3453fd44480d903338c663238bf280215dd9a07':
matroska: Write the field order information
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This allows to copy information related to the stream ID from the demuxer
to the muxer, thus allowing for example to retain information related to
synchronous and asynchronous KLV data packets. This information is used
in the muxer when remuxing to distinguish the two kind of packets (if the
information is lacking, data packets are considered synchronous).
The fate reference changes are due to the use of
av_packet_merge_side_data(), which increases the size of the output
packet size, since side data is merged into the packet data.
This is never mentioned in the specifications, and decoders work
just as fine without it. Update the fate references since the compressed
file is smaller.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Also support disabling them as they seem to cause problems to some
Users. They are also not allowed in IRT D-10 thus the default for
mxf_d10 is not to write them
This also decreases the filesize when no user comment are stored
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Compute individual stream durations in matroska muxer.
Write them as string tags in the same format as mkvmerge tool does.
Signed-off-by: Sasi Inguva <isasi@google.com>
The old one is the result of the reverse engineering and guesswork.
The new one has been written following the now-available specification.
This work is part of Outreach Program for Women Summer 2014 activities
for the Libav project.
The fate references had to be changed because the old demuxer truncates
the last frame in some cases, the new one handles it properly.
The seek-test reference is changed because seeking works differently
in the new demuxer. When seeking, the packet is not read from the stream
directly, but it is rather constructed by the demuxer. That is why
position is -1 now in the reference.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Previous version Reviewed-by: tim nicholson <nichot20@yahoo.com>
Previous version Reviewed-by: Tomas Härdin <tomas.hardin@codemill.se>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The mp2 seek test results change. Whether to skip samples if the file
had no LAME gapless tags was inconsistent. When seeking to the start
of the file, 529 samples were skipped, but when playing from start,
nothing was skipped. This commit changes the behavior on seek to skip
nothing.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The new reference.pnm is a freely licensed replacement. The photo has
been taken by Reinhard Tartler on August 28 2014, and is licensed under
the expat license as stated at http://www.jclark.com/xml/copying.txt
Fixes Ticket3901
the seek test error codes change due to a change in the failure path,
this could be avoided by changing the respective error codes to EINVAL
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Normally, a Laplace distribution is more typical of the residuals
encoded, but for noisy input, it's both better and simpler to be
safe and use a 1/d^2 distribution. Second hunk could use some
renormalization but it has effectively little impact.
Output size of ffvhuff on various 4:2:0 sequences:
context=0,1/d: 851974 27226 1137281
context=0,1/d²: 619081 25069 1051500
context=0,1/d³: 501983 30454 1290561
context=0,lapl: 500650 31754 1304082
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It has not been properly maintained for years and there is little hope
of that changing in the future.
It appears simpler to write a new replacement from scratch than
unbreaking it.
adpcm_ima_qt does not produce reproducible results, so it is temporarily
disabled (see #3701).
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
