When use new decode APIs(avcodec_send_packet/avcodec_receive_frame),
don't need to setting the deprecated field refcounted_frames.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
When use new decode APIs(avcodec_send_packet/avcodec_receive_frame),
don't need to setting the deprecated field refcounted_frames.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
When use new decode APIs(avcodec_send_packet/avcodec_receive_frame),
don't need to setting the deprecated field refcounted_frames.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
The logic is applicable only when use_template is enabled and use_timeline
is disabled. The logic monitors the flow of segment indexes. If a streams's
segment index value is not at the expected real time position, then
the logic corrects that index value.
Typically this logic is needed in live streaming use cases. The network
bandwidth fluctuations are common during long run streaming. Each
fluctuation can cause the segment indexes fall behind the expected real
time position. Without this logic, players will not be able to consume
the content, even after encoder's network condition comes back to
normal state.
When use_template is enabled and use_timeline is disabled, typically
it is required to generate the segments at the configured segment duration
rate on an average. This commit is particularly needed to handle the
segmentation when video frame rates are fractional like 29.97 or 59.94 fps.
There are use cases where average segment duration needs to be configured
and muxer is expected to maintain the average segment duration. So, using
the name 'min_seg_duration' will be misleading. So, changing the parameter
name to 'seg_duration', where it can be minimum segment duration or average
segment duration based on the use-case. The additional updates needed for
this functinality are made the sub-sequent patches of this patch series.
In some cases, mainly working with multiprogram mpeg-ts containers as
input, it would be handy to select sub stream of a specific program by
their metadata.
This patch makes it possible to narrow the stream selection among
streams of the specified program by stream metadata.
Examples:
p:601:m:language:hun will select all sub streams of program with id 601
where sub streams have metadata key named 'language' with value 'hun'.
p:602:m:guide will select all sub streams of program with id 602 where
sub streams have metadata key named 'guide'.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When using hls_list_size with hls_flags delete_segments, currently
hls_list_size * 2 +- segments remain on disk. With this new option,
the amount of disk space used can be controlled by the user.
fix ticket: #7131
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Aman Gupta <aman@tmm1.net>
Currently when specifying the program id you can only decide to select
all stream of the specified program (e.g. p:103 will select all streams
of program 103) or narrow the selection to a specific stream sub index
(e.g. p:145:1 will select 2nd stream of program 145.) But you can not
specify like all audio streams of program 145 or 3rd video stream of
program 311.
In some case, mainly working with multiprogram mpeg-ts containers as
input, this feature would be handy.
This patch makes it possible to narrow the stream selection among
streams of the specified program by stream type and optionally its
index. Handled types: a, v, s, d.
Examples: p:601:a will select all audio streams of program 601,
p:603:a:1 will select 2nd audio streams of program 603,
p:604:v:0 will select first video stream of program 604.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This seems to confuse Github users into thinking that we may accept pull
requests. We do not accept pull requests.
Sending patches to the ffmpeg-devel mailing list is our preferred method
for users to contribute code.
Signed-off-by: Lou Logan <lou@lrcd.com>
Info about default value of bind_address option and its abbreviated
version (b). Example modified to have named instanced filter and to show
its use.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Lou Logan <lou@lrcd.com>
PSEUDOPAL pixel formats are not paletted, but carried a palette with the
intention of allowing code to treat unpaletted formats as paletted. The
palette simply mapped the byte values to the resulting RGB values,
making it some sort of LUT for RGB conversion.
It was used for 1 byte formats only: RGB4_BYTE, BGR4_BYTE, RGB8, BGR8,
GRAY8. The first 4 are awfully obscure, used only by some ancient bitmap
formats. The last one, GRAY8, is more common, but its treatment is
grossly incorrect. It considers full range GRAY8 only, so GRAY8 coming
from typical Y video planes was not mapped to the correct RGB values.
This cannot be fixed, because AVFrame.color_range can be freely changed
at runtime, and there is nothing to ensure the pseudo palette is
updated.
Also, nothing actually used the PSEUDOPAL palette data, except xwdenc
(trivially changed in the previous commit). All other code had to treat
it as a special case, just to ignore or to propagate palette data.
In conclusion, this was just a very strange old mechnaism that has no
real justification to exist anymore (although it may have been nice and
useful in the past). Now it's an artifact that makes the API harder to
use: API users who allocate their own pixel data have to be aware that
they need to allocate the palette, or FFmpeg will crash on them in
_some_ situations. On top of this, there was no API to allocate the
pseuo palette outside of av_frame_get_buffer().
This patch not only deprecates AV_PIX_FMT_FLAG_PSEUDOPAL, but also makes
the pseudo palette optional. Nothing accesses it anymore, though if it's
set, it's propagated. It's still allocated and initialized for
compatibility with API users that rely on this feature. But new API
users do not need to allocate it. This was an explicit goal of this
patch.
Most changes replace AV_PIX_FMT_FLAG_PSEUDOPAL with FF_PSEUDOPAL. I
first tried #ifdefing all code, but it was a mess. The FF_PSEUDOPAL
macro reduces the mess, and still allows defining FF_API_PSEUDOPAL to 0.
Passes FATE with FF_API_PSEUDOPAL enabled and disabled. In addition,
FATE passes with FF_API_PSEUDOPAL set to 1, but with allocation
functions manually changed to not allocating a palette.
It works as a drop in replacement for the deprecated av_dup_packet(),
to ensure a packet is reference counted.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
avdevice_register_all() is still required to register devices into
lavf (this is required due to lavd being somewhat of a hack).
Signed-off-by: Josh de Kock <josh@itanimul.li>
This reverts commit 0fd475704e.
Revert "lavd: fix iterating of input and output devices"
This reverts commit ce1d77a5e7.
Signed-off-by: Josh de Kock <josh@itanimul.li>
* commit 'c438899a706422b8362a13714580e988be4d638b':
Add AV1 video decoding support through libaom
This contains some extra changes taken from the libvpx decoder
wrapper, most of them contained in the set_pix_fmt() function.
Merged-by: James Almer <jamrial@gmail.com>
The protocol requires libsrt (https://github.com/Haivision/srt) to be
installed
Signed-off-by: Sven Dueking <sven.dueking@nablet.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This is for applications which want to explicitly check for invalid
UTF-8 manually, and take actions that are better than dropping invalid
subtitles silently. (It's pretty much silent because sporadic avcodec
error messages are so common that you can't reasonably display them in a
prominent and meaningful way in a application GUI.)
This new side-data will contain info on how a packet is encrypted.
This allows the app to handle packet decryption.
Signed-off-by: Jacob Trimble <modmaker@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This can remove units with types in or not in a given set from a stream.
For example, it can be used to remove all non-VCL NAL units from an H.264 or
H.265 stream.
This adds a way for an API user to transfer QP data and metadata without
having to keep the reference to AVFrame, and without having to
explicitly care about QP APIs. It might also provide a way to finally
remove the deprecated QP related fields. In the end, the QP table should
be handled in a very similar way to e.g. AV_FRAME_DATA_MOTION_VECTORS.
There are two side data types, because I didn't care about having to
repack the QP data so the table and the metadata are in a single
AVBufferRef. Otherwise it would have either required a copy on decoding
(extra slowdown for something as obscure as the QP data), or would have
required making intrusive changes to the codecs which support export of
this data.
The new side data types are added under deprecation guards, because I
don't intend to change the status of the QP export as being deprecated
(as it was before this patch too).
The default behavior of the mediacodec decoder before this commit
was to delay flushes until all pending hardware frames were
returned to the decoder. This was useful for certain types of
applications, but was unexpected behavior for others.
The new default behavior with this commit is now to execute
flushes immediately to invalidate all pending frames. The old
behavior can be enabled by setting delay_flush=1.
With the new behavior, video players implementing seek can simply
call flush on the decoder without having to worry about whether
they have one or more mediacodec frames still buffered in their
rendering pipeline. Previously, all these frames had to be
explictly freed (or rendered) before the seek/flush would execute.
The new behavior matches the behavior of all other lavc decoders,
reducing the amount of special casing required when using the
mediacodec decoder.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Matthieu Bouron <matthieu.bouron@gmail.com>
Update dump_extra bit stream filter docs to follow current
code implement.
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch makes it possible to dinamically close the current segment
and step to the next one by introducing command handling capabilities
into the filter. This new feature is very usefull when working with
real-time sources or live streams as source. Combinig usage with zmqsend
tool you can interactively end the current segment and step to next one.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
documents delete_filler option for bsf h264_metadata.
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit adds an indev for Android devices on API level 24+ which
uses the Android NDK Camera2 API to capture video from builtin cameras
Signed-off-by: Felix Matouschek <felix@matouschek.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In a recent commit the default was changed from 0 (component) to 5
(unspecified), however some standards require using 0. With this option, the
user will be able to do so.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '6d86cef06ba36c0ed591e14a2382e9630059fc5d':
lavfi: Add support for increasing hardware frame pool sizes
Merged-by: Mark Thompson <sw@jkqxz.net>
* commit '5b145290df2998a9836a93eb925289c6c8b63af0':
lavc: Add support for increasing hardware frame pool sizes
Merged-by: Mark Thompson <sw@jkqxz.net>
AVCodecContext.extra_hw_frames is added to the size of hardware frame
pools created by libavcodec for APIs which require fixed-size pools.
This allows the user to keep references to a greater number of frames
after decode, which may be necessary for some use-cases.
It is also added to the initial_pool_size value returned by
avcodec_get_hw_frames_parameters() if a fixed-size pool is required.
