This "reuses" the flags introduced for the av_vdpau_bind_context() API
function, and makes them available to all hwaccels. This does not affect
the current vdpau API, as av_vdpau_bind_context() should obviously
override the AVCodecContext.hwaccel_flags flags for the sake of
compatibility.
Cherry-picked from Libav commit 16a163b5.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Certain hardware decoding APIs are not guaranteed to be thread-safe, so
having the user access decoded hardware surfaces while the decoder is
running in another thread can cause failures (this is mainly known to
happen with DXVA2).
For such hwaccels, only allow the decoding thread to run while the user
is inside a lavc decode call (avcodec_send_packet/receive_frame).
Merges Libav commit d4a91e65.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
This patch deprecates anything that has to do with merging/splitting
side data. Automatic side data merging (and splitting), as well as all
API symbols involved in it, are removed completely.
Two FF_API_ defines are dedicated to deprecating API symbols related to
this: FF_API_MERGE_SD_API removes av_packet_split/merge_side_data in
libavcodec, and FF_API_LAVF_KEEPSIDE_FLAG deprecates
AVFMT_FLAG_KEEP_SIDE_DATA in libavformat.
Since it was claimed that changing the default from merging side data to
not doing it is an ABI change, there are two additional FF_API_ defines,
which stop using the side data merging/splitting by default (and remove
any code in avformat/avcodec doing this): FF_API_MERGE_SD in libavcodec,
and FF_API_LAVF_MERGE_SD in libavformat.
It is very much intended that FF_API_MERGE_SD and FF_API_LAVF_MERGE_SD
are quickly defined to 0 in the next ABI bump, while the API symbols are
retained for a longer time for the sake of compatibility.
AVFMT_FLAG_KEEP_SIDE_DATA will (very much intentionally) do nothing for
most of the time it will still be defined. Keep in mind that no code
exists that actually tries to unset this flag for any reason, nor does
such code need to exist. Code setting this flag explicitly will work as
before. Thus it's ok for AVFMT_FLAG_KEEP_SIDE_DATA to do nothing once
side data merging has been removed from libavformat.
In order to avoid that anyone in the future does this incorrectly, here
is a small guide how to update the internal code on bumps:
- next ABI bump (probably soon):
- define FF_API_LAVF_MERGE_SD to 0, and remove all code covered by it
- define FF_API_MERGE_SD to 0, and remove all code covered by it
- next API bump (typically two years in the future or so):
- define FF_API_LAVF_KEEPSIDE_FLAG to 0, and remove all code covered
by it
- define FF_API_MERGE_SD_API to 0, and remove all code covered by it
This forces anyone who actually wants packet side data to temporarily
use deprecated API to get it all. If you ask me, this is batshit fucked
up crazy, but it's how we roll. Making AVFMT_FLAG_KEEP_SIDE_DATA to be
set by default was rejected as an ABI change, so I'm going all the way
to get rid of this once and for all.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
This "reuses" the flags introduced for the av_vdpau_bind_context() API
function, and makes them available to all hwaccels. This does not affect
the current vdpau API, as av_vdpau_bind_context() should obviously
override the AVCodecContext.hwaccel_flags flags for the sake of
compatibility.
Reflects the actual code and silences a gcc warning:
libavcodec/utils.c:2102:36: warning: passing argument 1 of 'av_packet_get_side_data' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
Decodes YUV 4:2:2 10-bit and RGB 12-bit files.
Older files with more subbands, skips, Bayer, alpha not supported.
Further fixes and refactorings by Anton Khirnov <anton@khirnov.net>,
Diego Biurrun <diego@biurrun.de>, Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Make it clear that there is no timing-dependent behavior. In particular,
there is no state in which both input and output are denied, and where
you have to wait for a while yourself to make progress (apparently some
hardware decoders like to do this).
Avoid wording that makes references to time. It shouldn't be mistaken
for some kind of asynchronous API (like POSIX read() can return EAGAIN
if there is no new input yet). It's a state machine, so try to use
appropriate terms.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Merges Libav commit 8a60bba0ae.
Make it clear that there is no timing-dependent behavior. In particular,
there is no state in which both input and output are denied, and where
you have to wait for a while yourself to make progress (apparently some
hardware decoders like to do this).
Avoid wording that makes references to time. It shouldn't be mistaken
for some kind of asynchronous API (like POSIX read() can return EAGAIN
if there is no new input yet). It's a state machine, so try to use
appropriate terms.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Allow all struct fields to be accessed directly, as long as they're
public.
Before this change, many fields were "public", but could be accessed via
AVOption only. This meant they were effectively not public, but were
present for documentation purposes, which was incredibly confusing at
best.
No deprecation guards, because the old decode API (for which this field
is needed) doesn't have any either.
This field should be removed together with the old decode calls.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This decoder can decode all existing SpeedHQ formats (SHQ0–5, 7, and 9),
including correct decoding of the alpha channel.
1080p is decoded in 142 fps on one core of my i7-4600U (2.1 GHz Haswell),
about evenly split between bitstream reader and IDCT. There is currently
no attempt at slice or frame threading, even though the format trivially
supports both.
NewTek very helpfully provided a full set of SHQ samples, as well as
source code for an SHQ2 encoder (not included) and assistance with
understanding some details of the format.
Certain hardware decoding APIs are not guaranteed to be thread-safe, so
having the user access decoded hardware surfaces while the decoder is
running in another thread can cause failures (this is mainly known to
happen with DXVA2).
For such hwaccels, only allow the decoding thread to run while the user
is inside a lavc decode call (avcodec_send_packet/receive_frame).
Currently, the new decoding API is pretty much just a wrapper around the
old deprecated one. This is problematic, since it interferes with making
full use of the flexibility added by the new API. The old API should
also be removed at some future point.
Reorganize the code so that the new send_packet/receive_frame functions
call the actual decoding directly and change the old deprecated
avcodec_decode_* functions into wrappers around the new API.
The new internal API for decoders is now changing as well. Before this
commit, it mirrors the public API, so the decoders need to implement
send_packet() and receive_frame() callbacks. This turns out to require
awkward constructs in both the decoders and the generic code. After this
commit, the decoders only implement the receive_frame() callback and
call a new internal function, ff_decode_get_packet() to obtain input
data, in the same manner to how the bitstream filters now work.
avcodec will now always make a reference to the input packet, which means
that non-refcounted input packets will be copied. Keeping the previous
behaviour, where this copy could sometimes be avoided, would make the
code significantly more complex and fragile for only dubious gains,
since packets are typically small and everyone who cares about
performance should use refcounted packets anyway.
Decode the Image Data Section (which contains merged pictures).
Support RGB/A and Grayscale/A in 8bits and 16 bits per channel.
Support uncompress and rle decompression in Image Data Section.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
