This will replace the 1024 character limited filename field. Compatiblity for
output contexts are provided by copying filename field to URL if URL is unset
and by providing an internal function for muxers to set both url and filename
at once.
Signed-off-by: Marton Balint <cus@passwd.hu>
The seek function can just return an error if seeking is unavailable,
but often this is too late. Add a flag that signals that the stream is
unseekable, and use it in HLS.
It was sort of optional before - if you didn't call it, networking was
initialized on demand, and an ugly warning was logged. Also, the doxygen
comments threatened that it would be made strictly required one day.
Make it explicitly optional. I would prefer to deprecate it fully, but
there might still be legitimate reasons to use this. But the average
user won't need it.
This is needed only for two reasons: to initialize TLS libraries like
OpenSSL and GnuTLS, and winsock.
OpenSSL and GnuTLS were already silently initialized on demand if the
global network init function was not called. They also have various
thread-safety acrobatics, which make concurrent initialization within
libavformat safe. In addition, the libraries are moving towards making
their global init functions safe, which removes all need for central
global init. In particular, GnuTLS 3.5.16 and OpenSSL 1.1.0g have been
found to have safe init functions. In all cases, they use internal
reference counters to avoid that the global uninit functions interfere
with concurrent uses of the library by other API users who called global
init.
winsock should be thread-safe as well, and maintains an internal
reference counter as well.
Since we still support ancient TLS libraries, which do not have this
fixed, and since it's unknown whether winsock and GnuTLS
reinitialization is costly in any way, don't deprecate the libavformat
functions yet.
Deprecate the entire library. Merged years ago to provide compatibility
with Libav, it remained unmaintained by the FFmpeg project and duplicated
functionality provided by libswresample.
In order to improve consistency and reduce attack surface, as well as to ease
burden on maintainers, it has been deprecated. Users of this library are asked
to migrate to libswresample, which, as well as providing more functionality,
is faster and has higher accuracy.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Use static mutexes instead of requiring a lock manager. The behavior
should be roughly the same before and after this change for API users
which did not set the lock manager at all (except that a minor memory
leak disappears).
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Merges Libav commit 47687a2f8a.
This was added in early 2013 and abandoned several months later; as far as
I can tell, there are no external users. Future OpenCL use will be via
hwcontext, which requires neither special OpenCL-only API nor global state
in libavutil.
All internal users are also deleted - this is just the unsharp filter
(replaced by unsharp_opencl, which is more flexible) and the deshake filter
(no replacement).
* commit 'b46a77f19ddc4b2b5fa3187835ceb602a5244e24':
lavc: external hardware frame pool initialization
Includes the fix from e724bdfffb
Merged-by: James Almer <jamrial@gmail.com>
This adds a new API, which allows the API user to query the required
AVHWFramesContext parameters. This also reduces code duplication across
the hwaccels by introducing ff_decode_get_hw_frames_ctx(), which uses
the new API function. It takes care of initializing the hw_frames_ctx
if needed, and does additional error handling and API usage checking.
Support for VDA and Cuvid missing.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit 'e6bff23f1e11aefb16a2b5d6ee72bf7469c5a66e':
cpu: add a function for querying maximum required data alignment
Adapted to work with the arbitrary runtime cpuflag changes av_force_cpu_flags()
can generate.
Merged-by: James Almer <jamrial@gmail.com>
This flag replaces the deprecated, non-prefixed HWACCEL_CODEC_CAP_EXPERIMENTAL
one.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Main use-case is proxying avio through a foreign I/O layer and a custom
AVIO context, without losing latency and performance characteristics.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Merged from Libav commit 173b56218f.
Before this commit, AVIOContext is to be freed with a plain av_free(),
which prevents us from adding any deeper structure to it.
(cherry picked from commit 99684f3ae7)
Signed-off-by: James Almer <jamrial@gmail.com>
Main use-case is proxying avio through a foreign I/O layer and a custom
AVIO context, without losing latency and performance characteristics.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Black isn't always just memset(ptr, 0, size). Limited YUV in particular
requires relatively non-obvious values, and filling a frame with
repeating 0 bytes is disallowed in some contexts. With component sizes
larger than 8 or packed YUV, this can become relatively complicated. So
having a generic function for this seems helpful.
In order to handle the complex cases in a generic way without destroying
performance, this code attempts to compute a black pixel, and then uses
that value to clear the image data quickly by using a function like
memset.
Common cases like yuv410p10 or rgba can't be handled with a simple
memset, so there is some code to fill memory with 2/4/8 byte patterns.
For the remaining cases, a generic slow fallback is used.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Merged from Libav commit 45df7adc1d.
Black isn't always just memset(ptr, 0, size). Limited YUV in particular
requires relatively non-obvious values, and filling a frame with
repeating 0 bytes is disallowed in some contexts. With component sizes
larger than 8 or packed YUV, this can become relatively complicated. So
having a generic function for this seems helpful.
In order to handle the complex cases in a generic way without destroying
performance, this code attempts to compute a black pixel, and then uses
that value to clear the image data quickly by using a function like
memset.
Common cases like yuv410p10 or rgba can't be handled with a simple
memset, so there is some code to fill memory with 2/4/8 byte patterns.
For the remaining cases, a generic slow fallback is used.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Merges Libav commit f9e7a2f95a.
Also adds untested VP9 support.
The check for DXVA2 COBJs is removed. Just update your MinGW to
something newer than a 5 year old release.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
To be used with the new d3d11 hwaccel decode API.
With the new hwaccel API, we don't want surfaces to depend on the
decoder (other than the required dimension and format). The old D3D11VA
pixfmt uses ID3D11VideoDecoderOutputView pointers, which include the
decoder configuration, and thus is incompatible with the new hwaccel
API. This patch introduces AV_PIX_FMT_D3D11, which uses ID3D11Texture2D
and an index. It's simpler and compatible with the new hwaccel API.
The introduced hwcontext supports only the new pixfmt.
Frame upload code untested.
Significantly based on work by Steve Lhomme <robux4@gmail.com>, but with
heavy changes/rewrites.
Merges Libav commit fff90422d1.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Use the flags argument of av_hwframe_ctx_create_derived() to pass the
mapping flags which will be used on allocation. Also, set the format
and hardware context on the allocated frame automatically - the user
should not be required to do this themselves.
(cherry picked from commit c5714b51aa)
Adds functions to convert to/from strings and a function to iterate
over all supported device types. Also adds a new invalid type
AV_HWDEVICE_TYPE_NONE, which acts as a sentinel value.
(cherry picked from commit b7487f4f3c)
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
To be used with the new d3d11 hwaccel decode API.
With the new hwaccel API, we don't want surfaces to depend on the
decoder (other than the required dimension and format). The old D3D11VA
pixfmt uses ID3D11VideoDecoderOutputView pointers, which include the
decoder configuration, and thus is incompatible with the new hwaccel
API. This patch introduces AV_PIX_FMT_D3D11, which uses ID3D11Texture2D
and an index. It's simpler and compatible with the new hwaccel API.
The introduced hwcontext supports only the new pixfmt.
Frame upload code untested.
Significantly based on work by Steve Lhomme <robux4@gmail.com>, but with
heavy changes/rewrites.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This adds tons of code for no other benefit than making VideoToolbox
support conform with the new hwaccel API (using hw_device_ctx and
hw_frames_ctx).
Since VideoToolbox decoding does not actually require the user to
allocate frames, the new code does mostly nothing.
One benefit is that ffmpeg_videotoolbox.c can be dropped once generic
hwaccel support for ffmpeg.c is merged from Libav.
Does not consider VDA or VideoToolbox encoding.
Fun fact: the frame transfer functions are copied from vaapi, as the
mapping makes copying generic boilerplate. Mapping itself is not
exported by the VT code, because I don't know how to test.
* commit '019ab88a95cb31b698506d90e8ce56695a7f1cc5':
lavc: add an option for exporting cropping information to the caller
Merged-by: James Almer <jamrial@gmail.com>
* commit 'e435beb1ea5380a90774dbf51fdc8c941e486551':
crypto: consistently use size_t as type for length parameters
Merged-by: Clément Bœsch <cboesch@gopro.com>
This is a newer API that is intended for decoders like the cuvid
wrapper. Until now, the wrapper required to set an awkward
"incomplete" hw_frames_ctx to set the device. Now the device
can be set directly, and the user can get AV_PIX_FMT_CUDA output
for a specific device simply by setting hw_device_ctx.
This still does a dummy ff_get_format() call at init time, and should
be fully backward compatible.
Use the flags argument of av_hwframe_ctx_create_derived() to pass the
mapping flags which will be used on allocation. Also, set the format
and hardware context on the allocated frame automatically - the user
should not be required to do this themselves.
The old "API" that signaled rotation as a metadata value has been
replaced by DISPLAYMATRIX side data quite a while ago.
There is no reason to make muxers/demuxers/API users support both. In
addition, the metadata API is dangerous, as user tags could "leak" into
it, creating unintended features or bugs.
ffmpeg CLI has to be updated to use the new API. In particular, we must
not allow to leak the "rotate" tag into the muxer. Some muxers will
catch this properly (like mov), but others (like mkv) can add it as
generic tag. Note applications, which use libavformat and assume the
old rotate API, will interpret such "rotate" user tags as rotate
metadata (which it is not), and incorrectly rotate the video.
The ffmpeg/ffplay tools drop the use of the old API for muxing and
demuxing, as all muxers/demuxers support the new API. This will mean
that the tools will not mistakenly interpret per-track "rotate" user
tags as rotate metadata. It will _not_ be treated as regression.
Unfortunately, hacks have been added, that allow the user to override
rotation by setting metadata explicitly, e.g. via
-metadata:s:v:0 rotate=0
See references to trac #4560. fate-filter-meta-4560-rotate0 tests this.
It's easier to adjust the hack for supporting it than arguing for its
removal, so ffmpeg CLI now explicitly catches this case, and essentially
replaces the "rotate" value with a display matrix side data. (It would
be easier for both user and implementation to create an explicit option
for rotation.)
When the code under FF_API_OLD_ROTATE_API is disabled, one FATE
reference file has to be updated (because "rotate" is not exported
anymore).
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
This supports retrieving the device from a provided hw_frames_ctx, and
automatically creating a hw_frames_ctx if hw_device_ctx is set.
The old API is not deprecated yet. The user can still use
av_vdpau_bind_context() (with or without setting hw_frames_ctx), or use
the API before that by allocating and setting hwaccel_context manually.
Cherry-picked from Libav commit 1a7ddba5.
(Adds missing APIchanges entry to the Libav version.)
Reviewed-by: Mark Thompson <sw@jkqxz.net>
This "reuses" the flags introduced for the av_vdpau_bind_context() API
function, and makes them available to all hwaccels. This does not affect
the current vdpau API, as av_vdpau_bind_context() should obviously
override the AVCodecContext.hwaccel_flags flags for the sake of
compatibility.
Cherry-picked from Libav commit 16a163b5.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
* commit '8ea35af7620e4f73f9e8c072e1c0fac9a04ec161':
avio: add a new flag for marking streams seekable by timestamp
Merged-by: James Almer <jamrial@gmail.com>
This patch deprecates anything that has to do with merging/splitting
side data. Automatic side data merging (and splitting), as well as all
API symbols involved in it, are removed completely.
Two FF_API_ defines are dedicated to deprecating API symbols related to
this: FF_API_MERGE_SD_API removes av_packet_split/merge_side_data in
libavcodec, and FF_API_LAVF_KEEPSIDE_FLAG deprecates
AVFMT_FLAG_KEEP_SIDE_DATA in libavformat.
Since it was claimed that changing the default from merging side data to
not doing it is an ABI change, there are two additional FF_API_ defines,
which stop using the side data merging/splitting by default (and remove
any code in avformat/avcodec doing this): FF_API_MERGE_SD in libavcodec,
and FF_API_LAVF_MERGE_SD in libavformat.
It is very much intended that FF_API_MERGE_SD and FF_API_LAVF_MERGE_SD
are quickly defined to 0 in the next ABI bump, while the API symbols are
retained for a longer time for the sake of compatibility.
AVFMT_FLAG_KEEP_SIDE_DATA will (very much intentionally) do nothing for
most of the time it will still be defined. Keep in mind that no code
exists that actually tries to unset this flag for any reason, nor does
such code need to exist. Code setting this flag explicitly will work as
before. Thus it's ok for AVFMT_FLAG_KEEP_SIDE_DATA to do nothing once
side data merging has been removed from libavformat.
In order to avoid that anyone in the future does this incorrectly, here
is a small guide how to update the internal code on bumps:
- next ABI bump (probably soon):
- define FF_API_LAVF_MERGE_SD to 0, and remove all code covered by it
- define FF_API_MERGE_SD to 0, and remove all code covered by it
- next API bump (typically two years in the future or so):
- define FF_API_LAVF_KEEPSIDE_FLAG to 0, and remove all code covered
by it
- define FF_API_MERGE_SD_API to 0, and remove all code covered by it
This forces anyone who actually wants packet side data to temporarily
use deprecated API to get it all. If you ask me, this is batshit fucked
up crazy, but it's how we roll. Making AVFMT_FLAG_KEEP_SIDE_DATA to be
set by default was rejected as an ABI change, so I'm going all the way
to get rid of this once and for all.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
This "reuses" the flags introduced for the av_vdpau_bind_context() API
function, and makes them available to all hwaccels. This does not affect
the current vdpau API, as av_vdpau_bind_context() should obviously
override the AVCodecContext.hwaccel_flags flags for the sake of
compatibility.
Adds functions to convert to/from strings and a function to iterate
over all supported device types. Also adds a new invalid type
AV_HWDEVICE_TYPE_NONE, which acts as a sentinel value.
* commit 'd7bc52bf456deba0f32d9fe5c288ec441f1ebef5':
imgutils: add a function for copying image data from GPU mapped memory
Merged-by: Clément Bœsch <u@pkh.me>
Not used by anything at all since we don't auto insert lavr filters.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
If AVVideotoolboxContext.cv_pix_fmt_type is set to 0, don't set the
kCVPixelBufferPixelFormatTypeKey value on the VT decoder.
This makes VT output its native format, which can be much faster on
some hardware iterations (if the native format does not match with
the requested format, it will be converted, which is slow).
The default is still forcing nv12.
Allow all struct fields to be accessed directly, as long as they're
public.
Before this change, many fields were "public", but could be accessed via
AVOption only. This meant they were effectively not public, but were
present for documentation purposes, which was incredibly confusing at
best.
This is an extended version of the AVFrame.opaque field, which can be
used to attach arbitrary user information to an AVFrame.
The usefulness of the opaque field is rather limited, because it can
store only up to 32 bits of information (or 64 bit on 64 bit systems).
It's not possible to set this field to a memory allocation, because
there is no way to deallocate it correctly.
The opaque_ref field circumvents this by letting the user set an
AVBuffer, which makes the user data refcounted.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Merges Libav commit 04f3bd3496.
This is an extended version of the AVFrame.opaque field, which can be
used to attach arbitrary user information to an AVFrame.
The usefulness of the opaque field is rather limited, because it can
store only up to 32 bits of information (or 64 bit on 64 bit systems).
It's not possible to set this field to a memory allocation, because
there is no way to deallocate it correctly.
The opaque_ref field circumvents this by letting the user set an
AVBuffer, which makes the user data refcounted.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
