If an input file is bigger than 2GB (assume sizeof(int) == 4)),
size0/size1 will overflow, making stddev and PSNR invalid.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Some debuggers/profilers use this metadata to determine which function a
given instruction is in; without it they get can confused by local labels
(if you haven't stripped those). On the other hand, some tools are still
confused even with this metadata. e.g. this fixes `gdb`, but not `perf`.
Currently only implemented for ELF.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This options is only used by huffyuv, ffvhuv, jpegls, mjpeg,
mpegvideoenc, png, utvideo.
It is a very codec-specific options, so deprecate the global variant.
Set proper limits to the maximum allowed values, and update utvideoenc
tests to use the new option name.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, x264, xavs, and vpx.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Use two separate functions, depending on whether VFP/NEON is available.
This is set to require armv5te - it uses blx, which is only available
since armv5t, but we don't have a separate configure item for that.
(It also uses ldrd, which requires armv5te, but this could be avoided
if necessary.)
Signed-off-by: Martin Storsjö <martin@martin.st>
Check the full FPU tag word instead of only the lower half and simplify
the comparison.
Use upper-case function base name as macro name to instantiate both
checked_call variants.
The DCA core decoder converts integer coefficients read from the
bitstream to floats just after reading them (along with dequantization).
All the other steps of the audio reconstruction are done with floats
which makes the output for the DTS lossless extension (XLL)
actually lossy.
This patch changes the DCA core to work with integer coefficients
until QMF. At this point the integer coefficients are converted to floats.
The coefficients for the LFE channel (lfe_data) are not touched.
This is the first step for the really lossless XLL decoding.
Not every asm routine is expected clear the MMX state after returning.
It is however a requisite for testing floating point code in checkasm.
Annotate functions requiring cleanup with declare_func_emms() and issue
emms after the call. The remaining functions are checked for having a
cleared MMX state after return.
The vector mode was deprecated in ARMv7-A/VFPv3 and various cpu
implementations do not support it in hardware. Vector mode code will
depending the OS either be emulated in software or result in an illegal
instruction on cpus which does not support it. This was not really
problem in practice since NEON implementations of the same functions are
preferred. It will however become a problem for checkasm which tests
every cpu flag separately.
Since this is a cpu feature newer cpu do not support anymore the
behaviour of this flag differs from the other flags. It can be only
activated by runtime cpu feature selection.
This is never mentioned in the specifications, and decoders work
just as fine without it. Update the fate references since the compressed
file is smaller.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Contrary to the normal fate tests that run via avconv, this tests
nontrivial call sequences that are only doable via the API
(mainly for different corner cases when using the muxer for
segmenting).
The test muxes fake packet data (with extradata that looks
enough like proper data to make the file be viewable with e.g.
boxdumper) and checks the hash of the produced files. The test also
verifies that fragments produced via different call sequences remain
identical (to avoid e.g. updating the output hashes and suddenly
having fragments that used to be identical suddenly diverging), for
fragments written with frag_discont and/or delay_moov.
Signed-off-by: Martin Storsjö <martin@martin.st>
Convert them to zigzag order, as the rest of them are.
When I was adding support for 10-bit DNxHD, I just copy-pasted the
missing quant matrices from the spec. Now it turns out the existing
matrices in dnxhddata.c were in zigzag order. This resulted in wrong
quantization for 10-bit DNxHD. The attached patch fixes the problem by
converting 10-bit quant matrices to zigzag order.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The System V ABI on x86-64 specifies that the al register contains an upper
bound of the number of arguments passed in vector registers when calling
variadic functions, so we aren't allowed to clobber it.
checkasm_fail_func() is a variadic function so also zero al before calling it.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Tested functions are internally kept in a binary search tree for efficient
lookups. The downside of the current implementation is that the tree quickly
becomes unbalanced which causes an unneccessary amount of comparisons between
nodes. Improve this by changing the tree into a self-balancing left-leaning
red-black tree with a worst case lookup/insertion time complexity of O(log n).
Significantly reduces the recursion depth and makes the tests run around 10%
faster overall. The relative performance improvement compared to the existing
non-balanced tree will also most likely increase as more tests are added.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This introduces a slight timebase computation difference in zmbv-8bit
fate test. This is expected since the new options are double instead
of ints, and the additional precision skews the results in a non
meaningful way.
Now we no longer have to rely on function pointers intentionally
declared without specified argument types.
This makes it easier to support functions with floating point parameters
or return values as well as functions returning 64-bit values on 32-bit
architectures. It also avoids having to explicitly cast strides to
ptrdiff_t for example.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If the return value doesn't fit in a single register rdx/edx can in some
cases be used in addition to rax/eax.
Doesn't affect any of the existing checkasm tests but might be useful later.
Also comment the relevant code a bit better.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
configure does check for isatty, and checkasm properly checks
HAVE_ISATTY, but on some platforms (e.g. WinRT), io.h needs to be
included for isatty to be available.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also replace custom tests for MD5 with those published in RFC 2202
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
It provides the following features:
* verify correctness by comparing output to the C version.
* detect failure to save and restore clobbered callee-saved registers.
* detect 32-bit parameters being used as if they were 64-bit in x86-64
(the upper halves are not guaranteed to be zero - but in practice
they very often are, which makes those bugs hard to spot otherwise).
* easy benchmarking.
Compile by running 'make checkasm'.
Execute by running 'tests/checkasm/checkasm'.
Optional arguments are '--bench' to run benchmarks for all functions,
'--bench=<pattern>' to run benchmarks for all functions that starts with
<pattern>, and '<integer>' to seed the PRNG for reproducible results.
Contains unit tests for most h264pred functions to get started, more tests
can be added afterwards using those as a reference.
Loosely based on code from x264. Currently only supports x86 and x86-64,
but additional architectures shouldn't be too much of an obstacle to add.
Note that functions with floating point parameters or floating point
return values are not supported. Some compiler-specific features or
preprocessor hacks would likely be required to add support for that.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Freeze picture release should be set to 1 when we're responding to a
fast update request. For simplicity we set it for all intra frames,
including those that starts a GOP.
Fixes issue where Tandberg MXP1700 does not recover from packet loss
state since it's waiting for the freeze picture relase indication.
Bug-Id: 873
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Ref H.261 recommendation section 4.2.1.3, setting the still image flag
to 1 disables still image mode. Some decoders require this in order to
decode the bitstream as normal video.
Fixes H.261 calls to Cisco E20.
Also, reserved (aka spare) bits should be set to 1 unless specified
otherwise.
Bug-Id: 872
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Most of the fate-dds-* and fate-txd-* tests already
output into the same pixel format regardless of
platform endianness, so there's no need to force
conversion to another format.
This fixes the tests fate-txd-16bpp, fate-txd-odd,
fate-dds-rgb16, fate-dds-rgb24 and fate-dds-xrgb on
big endian, where the tests seem to fail due to issues
with certain conversion codepaths in swscale.
Those conversion codepaths should of course be fixed, but
the individual decoder tests should use as little extra
conversion steps as possible.
Signed-off-by: Martin Storsjö <martin@martin.st>
The old one is the result of the reverse engineering and guesswork.
The new one has been written following the now-available specification.
This work is part of Outreach Program for Women Summer 2014 activities
for the Libav project.
The fate references had to be changed because the old demuxer truncates
the last frame in some cases, the new one handles it properly.
The seek-test reference is changed because seeking works differently
in the new demuxer. When seeking, the packet is not read from the stream
directly, but it is rather constructed by the demuxer. That is why
position is -1 now in the reference.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Using the internal DXTC routines brings support for non multiple of 4
textures. A new test is added to cover this feature. Hashes differ
since the decoding algorithm is different, though no visual changes
have been spotted.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
14496-3 suggests packing main_data of MP3 that is usually scattered
into multiple frames due to bit reservoir.
However, after packing main_data into a access unit, bitrate index
in the MPEG audio frame header doesn't match with actual frame size.
In order to accept this, this patch removes unnecessary frame size
checking on mp3 decoder.
Also, mov demuxer was changed to use MP3 parser only on special cases
(QT MOV with specific sample description) to avoid re-packetizing.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The FATE server does not report this information anyway and omitting
it makes the successful run send much less data.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The existing meridian audio test does not test
ff_mlp_rematrix_channel_arm. This sample (first 640k of
https://samples.libav.org/A-codecs/TrueHD/TrueHD.raw) uses
ff_mlp_rematrix_channel_arm. Since this sample has 5.1 channels it also
allows testing the integrated downmixing.
This uses the RIFF header stored size to figure out the expected AVI
file size, instead of the actual file. To work fully it requires handling
failed avio_seek() instead of assuming they always succeed.
Some fate file has been cut off and contains half a frame at the end which
previously was not output during demuxing. This frame is now output to
encoder, thus the fate diff update.
Bug-Id: 261
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
According to the DPX file format description found at
http://www.fileformat.info/format/dpx/egff.htm the ImageElement part of
the GenericImageHeader also contains an an offset to the real image data
beside the same member that can be found in the GenericFileHeader.
Libav keeps this member empty (=0) while some applications expects it to
be filled properly. FATE test updated accordingly.
Bug-Id: 742
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Only shift limited range luma, and always only shift chroma
for upconversion.
Based off a patch by Michael Niedermayer.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The new reference.pnm is a freely licensed replacement. The photo has
been taken by Reinhard Tartler on August 28 2014, and is licensed under
the expat license as stated at http://www.jclark.com/xml/copying.txt
In these cases, only drop dts. Because if we drop both we have no
timestamps at all for some files.
This improves playback of HLS streams from GoPro cameras.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes the default of '1' more explicit than defaulting to '1' in
fate-run.sh and regression-funcs.sh if THREADS is not set.
Fixes the reported thread count in fate-cpu if THREADS is not set.
libavutil/cpu-test prints raw and effective cpu flags to STDERR. Detected
cpu flags can be useful for debugging fate errors.
No comparison of the result against a expected result since that would
require fate config specific references.
Adding 'branch=release/10' to the fate config file will check the
release/10 branch instead of master. If no branch is specified it will
use 'master' so that existing config are still valid.
The server side changes are already deployed, see
https://fate.libav.org/v10/ for an example. The server supports only the
release/* branches.
The server enforces that a single slot tests always the same branch.
Please append "-v$RELEASE" to the slot of release branch configs or make
the slot otherwise unique.
A different fate samples dir is needed for each release branch. make
fate-rsync has the correct URL in each branch.
Previously, AVStream.codec.time_base was used for that purpose, which
was quite confusing for the callers. This change also opens the path for
removing AVStream.codec.
The change in the lavf-mkv test is due to the native timebase (1/1000)
being used instead of the default one (1/90000), so the packets are now
sent to the crc muxer in the same order in which they are demuxed
(previously some of them got reordered because of inexact timestamp
conversion).
It has not been properly maintained for years and there is little hope
of that changing in the future.
It appears simpler to write a new replacement from scratch than
unbreaking it.
This results in DefaultDuration not being written when the framerate is
not known, but as this field is purely informative, this should not
break any sane demuxers.
This corrects the bug that caused the checksums to change in
9767d7c092.
It caused the EOS flag to be set incorrectly; the ogg spec does not
allow it to be set in the middle of a logical bitstream.
Signed-off-by: Andrew Kelley <superjoe30@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
