The init functions marked as av_cold have to be executed in any case,
so there is no gain from trying to mark paths leading to such functions
as unlikely.
Instead, only extend edges on-demand when the motion vector actually
crosses the visible decoded area using ff_emulated_edge_mc(). This
changes decoding time for cathedral from 8.722sec to 8.706sec, i.e.
0.2% faster overall. More generally (VP8 uses this also), low-motion
content gets significant speed improvements, whereas high-motion content
tends to decode in approximately the same time.
Signed-off-by: Martin Storsjö <martin@martin.st>
Instead, keep them in the bitstream buffer until we read them verbatim,
this saves a memcpy() and a subsequent clearing of the target buffer.
decode_cabac+decode_mb for a sample file (CAPM3_Sony_D.jsv) goes from
6121.4 to 6095.5 cycles, i.e. 26 cycles faster.
Signed-off-by: Martin Storsjö <martin@martin.st>
Most of the changes are just trivial are just trivial replacements of
fields from MpegEncContext with equivalent fields in H264Context.
Everything in h264* other than h264.c are those trivial changes.
The nontrivial parts are:
1) extracting a simplified version of the frame management code from
mpegvideo.c. We don't need last/next_picture anymore, since h264 uses
its own more complex system already and those were set only to appease
the mpegvideo parts.
2) some tables that need to be allocated/freed in appropriate places.
3) hwaccels -- mostly trivial replacements.
for dxva, the draw_horiz_band() call is moved from
ff_dxva2_common_end_frame() to per-codec end_frame() callbacks,
because it's now different for h264 and MpegEncContext-based
decoders.
4) svq3 -- it does not use h264 complex reference system, so I just
added some very simplistic frame management instead and dropped the
use of ff_h264_frame_start(). Because of this I also had to move some
initialization code to svq3.
Additional fixes for chroma format and bit depth changes by
Janne Grunau <janne-libav@jannau.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The sh4 optimizations are removed, because the code is
100% identical to the C code, so it is unlikely to
provide any real practical benefit.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
ref_list is constructed from other fields per slice when needed, so do
not copy it for both frame and slice threading.
default_ref_list is constructed per frame and still needs to be copied
to per-slice contexts for slice threading, but a copy is not needed for
frame threading.
Clobbering these tables will temporarily clobber the template used
as a basis for other threads to start decoding from. If the other
decoding thread updates from the template right at that moment,
subsequent threads will get invalid (or, usually, none at all) mmco
tables. This leads to invalid reference lists and subsequent decode
failures.
Therefore, instead, decode the mmco tables only for the first slice in
a field or frame. For other slices, decode the bits and ensure they
are identical to the mmco tables in the first slice, but don't ever
clobber the context state. This prevents other threads from using a
clobbered/invalid template as starting point for decoding, and thus
fixes decoding in these cases.
This fixes occasional (~1%) failures of h264-conformance-mr1_bt_a with
frame-multithreading enabled.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
It is not posible to call get_buffer during frame-mt codec
initialization. Libavformat might pass huge amounts of data as
extradata after parsing broken files. The 'extradata' for the fuzzed
sample sample_varPAR_s5374_r001-02.avi is 2.8M large and contains
multiple slices.
This requires to move the avcodec_default_free_buffers() call to
ff_MPV_common_end() since otherwise delayed pictures would get freed
during a size change.
Conversion of the luma intra prediction mode to one of the constrained
("alzheimer") ones can happen by crafting special bitstreams, causing
a crash because we'll call a NULL function pointer for 16x16 block intra
prediction, since constrained intra prediction functions are only
implemented for chroma (8x8 blocks).
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Start code emulation prevention is only required in Annex B bytestream
packed NAL units. For other coding formats the size is already known.
Looking for a start code prefix can result in false positives like in
http://streams.videolan.org/streams/mp4/Mr_MrsSmith-h264_aac.mp4
which has a false positive in the SPS.
Fixes the following conformance suite samples:
HCBP1_HHI_A.264, HCBP2_HHI_A.264, HCMP1_HHI_A.264 (main)
HCHP1_HHI_B.264, HCHP2_HHI_A.264, HCHP3_HHI_A.264 (frext)
Fixes the following compile error with darwin/gcc-4.2.1:
In file included from libavcodec/error_resilience.c:33:
libavcodec/h264.h: In function ‘decode_mb_skip’:
libavcodec/h264.h:773: error: ‘always_inline’ function could not be inlined in call to ‘pred_pskip_motion’: the function body must appear before caller
libavcodec/h264.h:1334: error: called from here
FF_COMMON_FRAME holds the contents of the AVFrame structure and is also copied
to struct Picture. Replace by an embedded AVFrame structure in struct Picture.
Before this, almost all module groups have been used for grouping functions
and fields in structures semantically. This causes them to not appear
properly in the file documentation and needlessly clutters up the "Modules"
index.
Additionally, this commit streamlines some spelling and appearances.
In high bit depth, the QP values may now be up to (51 + 6*(bit_depth-8)).
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
In high bit depth the pixels will not be stored in uint8_t like in the
normal case, but in uint16_t. The pixel size is thus 1 in normal bit
depth and 2 in high bit depth.
Preparatory patch for high bit depth h264 decoding support.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
No speed improvement, but necessary for some future stuff.
Also opens up the possibility of asm chroma dc idct/dequant.
Originally committed as revision 26349 to svn://svn.ffmpeg.org/ffmpeg/trunk
Useful so that we don't have to run the hierarchical DC iDCT if there aren't
any coefficients. Opens up some future opportunities for optimization as well.
Originally committed as revision 26337 to svn://svn.ffmpeg.org/ffmpeg/trunk
About 2.5x the speed.
NOTE: the way that the asm code handles large qmuls is a bit suboptimal.
If x264-style dequant was used (separate shift and qmul values), it might
be possible to get some extra speed.
Originally committed as revision 26336 to svn://svn.ffmpeg.org/ffmpeg/trunk
libavcodec/h264.h:1260: warning: ‘decode_mb_skip’ defined but not used
patch by Eli Friedman, eli.friedman gmail com
Originally committed as revision 24069 to svn://svn.ffmpeg.org/ffmpeg/trunk
Passing an explicit filename to this command is only necessary if the
documentation in the @file block refers to a file different from the
one the block resides in.
Originally committed as revision 22921 to svn://svn.ffmpeg.org/ffmpeg/trunk
The function is only used within that file, so it makes sense to place
it there. This fixes many warnings of the type:
h264.h:1170: warning: ‘fill_filter_caches’ defined but not used
Originally committed as revision 22876 to svn://svn.ffmpeg.org/ffmpeg/trunk
This moves the H264-specific functions from DSPContext to the new
H264DSPContext. The code is made conditional on CONFIG_H264DSP
which is set by the codecs requiring it.
The qpel and chroma MC functions are not moved as these are used by
non-h264 code.
Originally committed as revision 22565 to svn://svn.ffmpeg.org/ffmpeg/trunk
These macros are redundant. All uses are replaced with the generic
DECLARE_ALIGNED macro instead.
Originally committed as revision 22233 to svn://svn.ffmpeg.org/ffmpeg/trunk
this seems 1 cpu cycle slower even though we practically just remove code.
Speed loss seems caused by the merge of if(left_type), iam commiting this
anyway as i cant imagine this to be anything but compiler messup.
Originally committed as revision 22073 to svn://svn.ffmpeg.org/ffmpeg/trunk
about 5 cpu cycles slower in the local code but should be overall faster
due to reduced cache use. (my sample though has too few intra4x4 blocks
for this to be meassureable easily either way)
Originally committed as revision 22052 to svn://svn.ffmpeg.org/ffmpeg/trunk
The code read/write code itself was 1 cycle faster, overall its
likely more due to cache effects
Originally committed as revision 22048 to svn://svn.ffmpeg.org/ffmpeg/trunk
This eliminates all aliasing violation warnings in h264 code.
No measurable speed difference with gcc-4.4.3 on i7.
Originally committed as revision 21881 to svn://svn.ffmpeg.org/ffmpeg/trunk
the row code. This function would only be needed on a MB basis for MBAFF+FMO
Originally committed as revision 21860 to svn://svn.ffmpeg.org/ffmpeg/trunk
Log:
h264: Fix pointer warnings by removing redundant [0]
Fixes:
h264.h:1222:38: warning: initialization from incompatible pointer type
h264.h:1299:38: warning: initialization from incompatible pointer type
h264.h:1314:42: warning: initialization from incompatible pointer type
Reason: breaks h264 decoding & fate
Originally committed as revision 21818 to svn://svn.ffmpeg.org/ffmpeg/trunk
Fixes:
h264.h:1222:38: warning: initialization from incompatible pointer type
h264.h:1299:38: warning: initialization from incompatible pointer type
h264.h:1314:42: warning: initialization from incompatible pointer type
Originally committed as revision 21814 to svn://svn.ffmpeg.org/ffmpeg/trunk
Fixes:
h264.h: In function 'fill_filter_caches':
h264.h:1216:73: warning: integer overflow in expression
h264.h:1307:81: warning: integer overflow in expression
Originally committed as revision 21813 to svn://svn.ffmpeg.org/ffmpeg/trunk
loop filter. This removes one obstacle of getting ff_h264_filter_mb_fast()
bitexact. code is maybe 0.1% faster
Originally committed as revision 21280 to svn://svn.ffmpeg.org/ffmpeg/trunk
