IEEE-754 differentiates two different kind of NaNs.
Quiet and Signaling ones. They are differentiated by the MSB of the
mantissa.
For whatever reason, actual hardware conversion of half to single always
sets the signaling bit to 1 if the mantissa is != 0, and to 0 if it's 0.
So our code has to follow suite or fate-testing hardware float16 will be
impossible.
This avoids triggering overflows in the filters, and avoids stray
test failures in the approximate functions on x86; due to rounding
differences, one implementation might overflow while another one
doesn't.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is done later in ff_mpv_frame_start() (and nobody uses
current_picture_ptr between setting it in ff_mpv_frame_start()).
(The reason the vsynth*-h263-obmc ref files change is because
the call to ff_find_unused_picture() now happens after the older
pictures have been unreferenced in ff_mpv_frame_start(),
so that their slots in the picture array can be immediately
reused; the obmc code is somehow buggy and changes its output
depending on the earlier contents of the motion_val buffer.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Previously, the checkasm test always passed h=8, so no other cases
were tested.
Out of the me_cmp functions, in practice, some functions are hardcoded
to always assume a 8x8 block (ignoring the h parameter), while others
do use the parameter. For those with hardcoded height, both the
reference C function and the assembly implementations ignore the
parameter similarly.
The documentation for the functions indicate that heights between
w/2 and 2*w, within the range of 4 to 16, should be supported. This
patch just tests random heights in that range, without knowing what
width the current function actually uses.
Signed-off-by: Martin Storsjö <martin@martin.st>
Change the reference to exactly match the C reference in swscale,
instead of exactly matching the x86 SIMD implementations (which
differs slightly). Test with and without SWS_ACCURATE_RND - if this
flag isn't set, the output must match the C reference exactly,
otherwise it is allowed to be off by 2.
Mark a couple x86 functions as unavailable when SWS_ACCURATE_RND
is set - apparently this discrepancy hasn't been noticed in other
exact tests before.
Add a test for yuv2plane1.
Signed-off-by: Jonathan Swinney <jswinney@amazon.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Up until now, ff_wmv2_decode_secondary_picture_header() only
set the mb_type array for non I-pictures, so that the decoding
process uses the earlier values of this array; this affects
the output of the wmv8-x8intra FATE-test (which this patch
therefore updates). These earlier values were set when decoding
earlier frames or when the buffer was initially zero-allocated.
A consequence of this is that the output of this test would be
random if ff_find_unused_picture() would select the unused picture
to return at random. Furthermore decoding from a keyframe onwards
depends upon the earlier state of the decoder.
This patch therefore zeroes said array when decoding an I picture.
(It is not claimed that zero is the right value to fill the array with.
I just don't know.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These tables are only used by encoders and only for the current picture;
ergo they need not be put into the picture at all, but rather into
the encoder's context. They also don't need to be refcounted,
because there is only one owner.
In contrast to this, the earlier code refcounts them which
incurs unnecessary overhead. These references are not unreferenced
in ff_mpeg_unref_picture() (they are kept in order to have something
like a buffer pool), so that several buffers are kept at the same
time, although only one is needed, thereby wasting memory.
The code also propagates references to other pictures not part of
the pictures array (namely the copy of the current/next/last picture
in the MpegEncContext which get references of their own). These
references are not unreferenced in ff_mpeg_unref_picture() (the
buffers are probably kept in order to have something like a pool),
yet if the current picture is a B-frame, it gets unreferenced
at the end of ff_mpv_encode_picture() and its slot in the picture
array will therefore be reused the next time; but the copy of the
current picture also still has its references and therefore
these buffers will be made duplicated in order to make them writable
in the next call to ff_mpv_encode_picture(). This is of course
unnecessary.
Finally, ff_find_unused_picture() is supposed to just return
any unused picture and the code is supposed to work with it;
yet for the vsynth*-mpeg4-adap tests the result depends upon
the content of these buffers; given that this patchset
changes the content of these buffers (the initial content is now
the state of these buffers after encoding the last frame;
before this patch the buffers used came from the last picture
that occupied the same slot in the picture array) their ref-files
needed to be changed. This points to a bug somewhere (if one removes
the initialization, one gets uninitialized reads in
adaptive_quantization in ratecontrol.c).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This codepath is enabled by default on arm, if the linux perf API
is available, unless disabled with --disable-linux-perf.
Signed-off-by: Martin Storsjö <martin@martin.st>
The "AYUV" format is defined by Microsoft as their preferred format for
4:4:4 content, and so it is the format used by Intel VAAPI and QSV.
As Microsoft like to define their byte ordering in little-endian
fashion, the memory order is reversed, and so our pix_fmt, which
follows memory order, has a reversed name (VUYA).
Firstly, the timestamps generated from framerate are inaccurate for
variable framerate mode.
Secondly, the timestamps always start from zero, while pts/dts can
start from nonzero. FLV demuxer rejects such index with message:
"Found invalid index entries, clearing the index".
The generated files are endian-dependent, so no checksums
may be part of the ref files.
Fixes ticket #9854.
Tested-by: Sebastian Ramacher <sramacher@debian.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The output file (even the filesize) of the recently added
EXR tests depends on the endianness; therefore checksums
of these files must not be part of the ref file. Therefore
this commit adds an option (unused for now) to disable these
checksums on a per-test basis.
In order to avoid having to check twice, the checksum and
the filesize info are moved to immediately follow one another;
this results into updates to the ref files of all lavf-image tests.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Necessitated by 6ca43a9675
and 425b309fa4.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This tests the new "-flags2 icc_profiles" option by making sure the
embedded ICC profile gets correctly detected as sRGB.
Signed-off-by: Niklas Haas <git@haasn.dev>
It conflicts with the name of the test using the testtool
in libavformat.mak.
Fixes ticket #9841.
Reviewed-by: Pierre-Anthony Lemieux <pal@sandflow.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Same issues apply to it as to -shortest.
Changes the results of the following tests:
- matroska-flac-extradata-update
The test reencodes two input FLAC streams into three output FLAC
streams. The last output stream is limited to 8 frames. The current
code results in the first two output streams having 12 frames, after
this commit all three streams have 8 frames and are the same length.
This new result is better, since it is predictable.
- mkv-1242
The test streamcopies one video and one audio stream, video is limited
to 11 frames. The new result shortens the audio stream so that it is
not longer than the video.
The -shortest option (which finishes the output file at the time the
shortest stream ends) is currently implemented by faking the -t option
when an output stream ends. This approach is fragile, since it depends
on the frames/packets being processed in a specific order. E.g. there
are currently some situations in which the output file length will
depend unpredictably on unrelated factors like encoder delay. More
importantly, the present work aiming at splitting various ffmpeg
components into different threads will make this approach completely
unworkable, since the frames/packets will arrive in effectively random
order.
This commit introduces a "sync queue", which is essentially a collection
of FIFOs, one per stream. Frames/packets are submitted to these FIFOs
and are then released for further processing (encoding or muxing) when
it is ensured that the frame in question will not cause its stream to
get ahead of the other streams (the logic is similar to libavformat's
interleaving queue).
These sync queues are then used for encoding and/or muxing when the
-shortest option is specified.
A new option – -shortest_buf_duration – controls the maximum number of
queued packets, to avoid runaway memory usage.
This commit changes the results of the following tests:
- copy-shortest[12]: the last audio frame is now gone. This is
correct, since it actually outlasts the last video frame.
- shortest-sub: the video packets following the last subtitle packet are
now gone. This is also correct.
The amount of padding samples reported by containers take into account the
extended samplerate in HE-AAC.
Fixes ticket #9671.
Signed-off-by: James Almer <jamrial@gmail.com>
wrapped_avframe_decode() uses an AVFrame as dst in av_frame_move_ref()
after having called ff_decode_frame_props() to attach side-date
to this very frame. This leaks all the side-data and metadata
that ff_decode_frame_props() has attached.
This happens in various fate-filter-metadata tests since
6ca43a9675.
These particular leaks (which affect metadata-only)
could be fixed by not adding metadata side-data to AVPackets
in libavdevice if they are also available from the AVFrames.
Yet this would break users that extract the metadata from
AVPackets.
The changes to FATE happen because of the way av_dict_set()
works when it overwrites an already existing entry:
It overwrites the entry to be overwritten with the last entry
and adds the new entry at the end. The end result is that
the first entry of the dict is the second-to-last-entry of
the original dict, the last entry of the dict is the last
entry of the old dict and the first count - 2 entries
of the original dict are at positions 1..count - 2 in their
original order.
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids an extra copy of potentially quite big video frames.
Instead of copying the entire frames data into a rawvideo packet it
packs the frame into a wrapped avframe packet and passes it through
as-is.
Unfortunately, wrapped avframes are set up to be video frames, so the
audio frames continue to be copied.
Additionally, this enabled passing through video frames that previously
were impossible to process, like hardware frames or other special
formats that couldn't be packed into a rawvideo packet.
For 422 frames we should not use hard coded 8 to calculate mb size for
uv plane. Chroma shift should be taken into consideration to be
compatiple with different sampling format.
The error is reported by fate test when av_cpu_max_align() return 64
on the platform supporting AVX512. This is a hidden error and it is
exposed after commit 17a59a634c.
mpeg2enc has a mechanism to reuse frames. When it computes SSE (sum of
squared error) on current mb, reconstructed mb will be wrote to the
previous mb space, so that the memory can be saved. However if the align
is 64, the frame is shared in somewhere else, so the frame cannot be
reused and a new frame to store reconstrued data is created. Because the
height of mb is wrong when compute sse on 422 frame, starting from the
second line of macro block, changed data is read when frame is reused
(we need to read row 16 rather than row 8 if frame is 422), and unchanged
data is read when frame is not reused (a new frame is created so the
original frame will not be changed).
That is why commit 17a59a634c exposes this
issue, because it add av_cpu_max_align() and this function return 64 on
platform supporting AVX512 which lead to creating a frame in mpeg2enc,
and this lead to the different outputs.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Some samples contain Active Format Descriptors, yet the output
of no test depends upon them, so that they are de-facto untested.
So add a dedicated test for them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Update the still AVIF parser to only read the primary item. With this
patch, AVIF still images with exif/icc/alpha channel will no longer
fail to parse.
For example, this patch enables parsing of files in:
https://github.com/AOMediaCodec/av1-avif/tree/master/testFiles/Microsoft
Adding two fate tests:
1) demuxing of still image with 1 item - this test will pass regardless
of this patch.
2) demuxing of still image with 2 items - this test will fail without
this patch and will pass with patch applied.
Partially fixes trac ticket #7621
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: James Zern <jzern@google.com>
- ff_pix_abs16_neon
- ff_pix_abs16_xy2_neon
In direct micro benchmarks of these ff functions verses their C implementations,
these functions performed as follows on AWS Graviton 3.
ff_pix_abs16_neon:
pix_abs_0_0_c: 141.1
pix_abs_0_0_neon: 19.6
ff_pix_abs16_xy2_neon:
pix_abs_0_3_c: 269.1
pix_abs_0_3_neon: 39.3
Tested with:
./tests/checkasm/checkasm --test=motion --bench --disable-linux-perf
Signed-off-by: Jonathan Swinney <jswinney@amazon.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Up until now, updating extradata was very ad-hoc: The amount of
space reserved for extradata was not recorded when writing the
header; instead the AAC code simply presumed that it was enough.
This commit changes this by recording how much space is available.
This brings with it that the code for writing of and reserving space
for the CodecPrivate and for updating it diverges. They are therefore
split; this allows to put other common tasks like seeking to
right offset as well as writing padding (in case the new extradata did
not fill the whole reserved space) to this common function.
The code for filling up the reserved space is smarter than the code
it replaces; therefore it is no longer necessary to reserve more
than necessary just to be sure that one can add an EBML Void element
(whose minimum size is two) lateron. This is the reason for the change
to the aac-autobsf-adtstoasc test.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible by using a dynamic buffer to write them;
said dynamic buffer is (re)used and reset as appropriate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
