* qatar/master: (21 commits)
fate: allow testing with libavfilter disabled
x86: XOP/FMA4 CPU detection support
ws_snd: misc cosmetic clean-ups
ws_snd: remove the 2-bit ADPCM table and just subtract 2 instead.
ws_snd: use memcpy() and memset() instead of loops
ws_snd: use samples pointer for loop termination instead of a separate iterator variable.
ws_snd: make sure number of channels is 1
ws_snd: add some checks to prevent buffer overread or overwrite.
ws_snd: decode to AV_SAMPLE_FMT_U8 instead of S16.
flacdec: fix buffer size checking in get_metadata_size()
rtp: Simplify ff_rtp_get_payload_type
rtpenc: Add a payload type private option
rtp: Correct ff_rtp_get_payload_type documentation
avconv: replace all fprintf() by av_log().
avconv: change av_log verbosity from ERROR to FATAL for fatal errors.
cmdutils: replace fprintf() by av_log()
avtools: parse loglevel before all the other options.
oggdec: add support for Xiph's CELT codec
sol: return error if av_get_packet() fails.
cosmetics: reindent and pretty-print
...
Conflicts:
avconv.c
cmdutils.c
libavcodec/avcodec.h
libavcodec/version.h
libavformat/oggparsecelt.c
libavformat/utils.c
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Add LATM demuxer
avplay: flush audio decoder with empty packets at EOF if the decoder has CODEC_CAP_DELAY set.
8svx/iff: fix decoding of compressed stereo 8svx files.
8svx: log an error message if output buffer is too small
8svx: check packet size before reading the initial sample value.
8svx: output 8-bit samples instead of 16-bit.
8svx: split delta decoding into a separate function.
mp4: Don't read an empty Decoder Config Descriptor
fate.sh: Ignore errors from rm command during cleanup.
fate.sh: Run git-pull in quiet mode to avoid console spam.
Apple ProRes decoder
rtmp: Make the input FLV parser handle data cut at any point
rv34: Check for invalid slices offsets
eval: test isnan(sqrt(-1)) instead of just sqrt(-1)
Conflicts:
Changelog
libavcodec/8svx.c
libavcodec/proresdec.c
libavcodec/version.h
libavformat/iff.c
libavformat/version.h
tests/ref/fate/eval
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
swfdec: Add support for sample_rate_code 0 (5512 Hz)
dct-test: factor out some common code and do whas was likely intended
doc: library versions need to be bumped in version.h
Revert "ffmpeg: get rid of useless AVInputStream.nb_streams."
Remove some forgotten AVCodecContext.palctrl usage.
lavc/utils: move avcodec_init() higher in the file.
lavc: replace some deprecated FF_*_TYPE with AV_PICTURE_TYPE_*
ac3dec: actually use drc_scale private option
lavc: undeprecate AVPALETTE_SIZE and AVPALETTE_COUNT macros
alsa: add missing header
msmpeg4: remove leftover unused debug variable declaration
Fix assert() calls that need updates after FF_COMMON_FRAME macro elimination.
Fix av_dlog invocations with wrong or missing logging context.
vf_yadif: add support to yuva420p
vf_yadif: correct documentation on the parity parameter
vf_yadif: copy buffer properties like aspect for second frame as well
oma: support for encrypted files
id3v2: add support for non-text and GEOB type tag frames
des: add possibility to calculate DES-CBC-MAC with small buffer
Conflicts:
ffmpeg.c
libavcodec/dct-test.c
libavformat/mpegts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The new syntax is more extensible and more user-friendly.
This breaks the previous syntax, should not be an issue as possibly
no-one is already using anullsrc.
* qatar/master:
lavfi: add select filter
oggdec: fix out of bound write in the ogg demuxer
movenc: create an alternate group for each media type
lavd: add libcdio-paranoia input device for audio CD grabbing
rawdec: refactor private option for raw video demuxers
pcmdec: use unique classes for all pcm demuxers.
rawdec: g722 is always 1 channel/16kHz
Conflicts:
Changelog
configure
doc/filters.texi
libavdevice/avdevice.h
libavfilter/avfilter.h
libavfilter/vf_select.c
tests/ref/lavf/mov
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add aconvert filter to perform sample format, channel layout, and
packing format conversion.
The aconvert code depends on audio conversion code in libavcodec, so
this requires a dependency on libavcodec.
Based on previous work by S.N. Hemanth Meenakshisundaram and Mina Nagy
Zaki, performed for the GSoC 2010 and 2011.
This list is mainly useful to be directly used as a parameter by the
audio sink buffer, when there is no need to force a specific channel
layout.
The list of formats is generated programmatically, and avoids channel
layouts not supported by libavfilter (with more than 8 channels).
We preferred to avoid compile-time generation in order to avoid some
unnecessary complexity (build hacks, generating code maintainance
etc.).
A more compact way to express this list through the use of macros
should be possible when libavfilter will support more than 8 channels,
as there will be no need to filter out channel layouts with more than
8 channels.
See thread:
Subject: [FFmpeg-devel] [PATCH] lavfi: add ff_all_channel_layouts internal symbol
Date: Sat, 20 Aug 2011 15:33:16 +0200
A function name should tell what the function does rather than what
the function returns. This also avoids possible conflicts
(e.g. between a function and a public list of all supported formats),
and clarifies the code.
Breaks audio API/ABI, add a backward compatibility layer for video
API/ABI.
These changes were forgotten in commits:
lavfi: simplify signature for avfilter_get_audio_buffer() and friends
(commit 2c0317419b)
and
lavfi: consistently use int for sample_rate in AVFilterLink and AVFilterBufferRefAudioProps
(commit 4381bddc9f)
* qatar/master:
adpcm: split ADPCM encoders and decoders into separate files.
doc/avconv: fix typo.
rv34: check that subsequent slices have the same type as first one.
smacker demuxer: handle possible av_realloc() failure.
lavfi: add split filter from soc.
lavfi: add showinfo filter
libxavs: add private options corresponding to deprecated global options
Conflicts:
Changelog
libavcodec/adpcm.c
libavfilter/avfilter.h
libavfilter/vf_showinfo.c
libavfilter/vf_split.c
libavformat/smacker.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The additional parameters were never used and are complicating the
function interface. Also, they were inconsistent with the way the
video API works.
So this assumes that a requested samples buffer will have *always* the
format specified in the requested link.
This breaks audio filtering API and ABI.
Merge video_qscale (set by -qscale) and audio_qscale (set by -aq) into
one 'qscale' field in the options context. Add a shortcut -q for -qscale
and make -aq an alias for -q:a.
The libavfilter SOC SVN repo is badly outdated, and some filters
supports a syntax different from the current code, so it is better do
not misled users into using it and just drop its reference.
* qatar/master:
Fixed segfault with wavpack decoder on corrupted decorrelation terms sub-blocks.
avconv: move audio_channels to the options context.
avconv: move *_disable to options context.
avconv: remove -[vas]lang options.
avconv: move codec tags to options context.
cljr: init_get_bits size in bits instead of bytes
indeo2: fail if input buffer too small
indeo2: init_get_bits size in bits instead of bytes
ffv1: Fixed size given to init_get_bits() in decoder.
Conflicts:
avconv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is done in order to clarify the non-video-specific nature of the
buffersink code, as the result of the video/audio API unification of
the previous commit, and for improving overall consistency.
The new API is more generic (no distinction between audio/video for
pulling frames), and avoids code duplication.
A backward compatibility layer is kept for avoiding tools ABI breaks
(only for the video binary interface, audio interface was never used
in the tools).
* qatar/master:
ac3enc: Add channel coupling support for the fixed-point AC-3 encoder.
ac3enc: scale floating-point coupling channel coefficients in scale_coefficients() rather than in apply_channel_coupling()
ac3enc: fix encoding of stereo ac3 files when rematrixing is disabled.
wavpack: fix wrong return value in wavpack_decode_block()
avconv: fix parsing metadata specifiers.
fate: use +frame+slice named constants instead of '3'
mpeg12: propagate more real return values through chunk decode error return and fix some indentation
wavpack: use context reset in appropriate places
avconv: move mux_preload and mux_max_delay to options context
avconv: move bitstream filters to options context.
avconv: move rate_emu to options context.
avconv: move max_frames to options context.
avconv: move metadata to options context.
avconv: move ts scale to options context.
avconv: move chapter maps to options context.
avconv: move metadata maps to options context.
avconv: move codec_names to options context.
Conflicts:
avconv.c
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
AVOptions: fix av_set_string3() doxy to match reality.
cmdutils: get rid of dummy contexts for examining AVOptions.
lavf,lavc,sws: add {avcodec,avformat,sws}_get_class() functions.
AVOptions: add AV_OPT_SEARCH_FAKE_OBJ flag for av_opt_find().
cpu detection: avoid a signed overflow
Conflicts:
avconv.c
cmdutils.c
doc/APIchanges
ffmpeg.c
libavcodec/options.c
libavcodec/version.h
libavformat/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Transforms the loose enumeration of issues that was to far below
in the text into a more verbose paragraph at the top. The new text
also mentions the possibility to propose new types of issues to
track on the development mailing list.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
This change makes the first part of the file easier to read quickly.
It makes it also easier to spot the URLs which might be one of the main
interests of many readers.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Correct a few grammar and spelling errors. Also improve consistency
by always referring to substatus (not substate).
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
* qatar/master:
Revert "h264: Properly set coded_{width, height} when parsing H.264."
isom: add missing AVC-Intra tags, rearrange list and update comments
avconv: remove stubs of crop* and pad* options
avconv: re-add nb_streams to InputFile.
Conflicts:
avconv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also extend the functionality to use the last found program to start the search
after that program.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The new function provides a more generic interface than av_fifo_peek()
for peeking at a FIFO buffer data.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
avconv: print the codecs names in the stream mapping.
avconv: move the avcodec_find_decoder() call to add_input_streams().
Windows Media Image decoder (WMVP/WVP2)
ac3enc: remove outdated TODO comment for apply_channel_coupling()
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/vc1dec.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Clarify with an example what the user should use instead of the
deprecated (and no longer working) -s/-pix_fmt options.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
avconv: Fix spelling errors.
aac: Only set sample rate and object type from ADTS if output hasn't been configured.
aac: Set SBR and PS to unsignalled during headerless and ADTS initialization.
aac: Only output configure if audio was found.
avconv: save two levels of indentation in flush_encoders()
avconv: factor flushing encoders out of output_packet().
avconv: factor out initializing input streams.
avconv: remove -intra option.
avconv: reset streamid_map between output files.
avconv: make timer_start a local var in transcode().
avconv: cosmetics, move OutputStream.
avconv: remove two unused macros.
Conflicts:
avconv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (23 commits)
h264: hide reference frame errors unless requested
swscale: split hScale() function pointer into h[cy]Scale().
Move clipd macros to x86util.asm.
avconv: reindent.
avconv: rescue poor abused start_time global.
avconv: rescue poor abused recording_time global.
avconv: merge two loops in output_packet().
avconv: fix broken indentation.
avconv: get rid of the arbitrary MAX_FILES limit.
avconv: get rid of the output_streams_for_file vs. ost_table schizophrenia
avconv: add a wrapper for output AVFormatContexts and merge output_opts into it
avconv: make itsscale syntax consistent with other options.
avconv: factor out adding input streams.
avconv: Factorize combining auto vsync with format.
avconv: Factorize video resampling.
avconv: Don't unnecessarily convert ipts to a double.
ffmpeg: remove unsed variable nopts
RV3/4 parser: remove unused variable 'off'
add XMV demuxer
rmdec: parse FPS in RealMedia properly
...
Conflicts:
avconv.c
libavformat/version.h
libswscale/swscale.c
tests/ref/fate/lmlm4-demux
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Revert "avconv: use stream copy by default when possible."
avconv: print stream copy information.
avconv: use stream copy by default when possible.
matroskaenc: vertical alignment.
matroskaenc: implement query_codec()
lavf: add avformat_query_codec().
lavc: add avcodec_get_type() for mapping codec_id -> type.
flvenc: use int64_t to store offsets
avconv: don't segfault on 0 input files.
Do not write ID3v1 tags by default
mpegts: log into an AVFormatContext rather than MpegTSContext.
Conflicts:
doc/APIchanges
libavcodec/version.h
libavformat/avformat.h
libavformat/mp3enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Its only reason for its existence was ffmpeg's inability to properly assign
AVOptions to streams. Now this is not a problem anymore, so 'ab' should
go.
The new option doesn't depend on its placement wrt -new* options (which
don't exist anymore) and works in a similar way as per-stream AVOptions.
-[vas]codec remain as aliases to -codec:[vas]
* qatar/master:
Fix NASM include directive
dsputil_mmx: Honor HAVE_AMD3DNOW
lavf,lavd: remove all usage of AVFormatParameters from demuxers.
jack: add 'channels' private option.
VC-1: fix reading of custom PAR.
Remove redundant and dubious video codec detection by its extradata
mpeg12: remove repeat-field code disabled since May 2002
patch checklist: suggest fate instead of regression tests
Turn on resampling on sudden size change instead of bailing out during recode.
avtools: reinitialise filter chain when input video stream changes dimensions
Conflicts:
Makefile
avconv.c
doc/developer.texi
ffplay.c
libavcodec/x86/dsputil_mmx.c
libavdevice/libdc1394.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b2c087871dafc7d030b2d48457ddff597dfd4925':
Move x86util.asm from libavcodec/ to libavutil/.
Move x86inc.asm to libavutil/.
APIchanges: note error_recognition in lavf
lavf: add support for error_recognition, use it in avidec, and bump minor API version
avconv: change semantics of -map
avconv: get rid of new* options.
cmdutils: allow precisely specifying a stream for AVOptions.
configure: add missing CFLAGS to fix building on the HURD
libx264: Include hint for possible values for configuring libx264
cmdutils: allow ':'-separated modifiers in option names.
avconv: make -map_metadata work consistently with the other options
avconv: remove deprecated options.
avconv: make -map_chapters accept only the input file index.
Make a copy of ffmpeg under a new name -- avconv.
ffmpeg: add a warning stating that the program is deprecated.
Add weighted motion compensation for RV40 B-frames
RV3/4: calculate B-frame motion weights once per frame
Move RV3/4-specific DSP functions into their own context
mjpeg: propagate decode errors from ff_mjpeg_decode_sos and ff_mjpeg_decode_dqt
h264: notice memory allocation failure
Conflicts:
.gitignore
Makefile
cmdutils.c
configure
doc/ffplay.texi
doc/ffprobe.texi
doc/ffserver.texi
libavcodec/libx264.c
libavformat/avformat.h
libavformat/avidec.c
libavformat/version.h
tests/lavf-regression.sh
tests/lavfi-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
New syntax contains an optional stream type, allowing to refer to n-th
stream of specific type.
Omitting stream number now maps all streams of the given type.
They are confusing, irregular and redundant -- -map already contains all
the information. Stream maps can now be parsed in opt_output_file().
Add a more user-friendly default behavior in case no maps are present.
Breaks -programid for now, but it never worked properly anyway. A better
solution will be written soon.
Before, it took an input and output file index, now it only takes an
input file and applies to the next output file.
Stream/chapter/program specification is now part of the option name and
the delimiter was changed from ',' to ':' to be consistent with the
similar feature for AVOptions.
