Fixes#7312, segmentation fault on close of X11 server
xcb_query_pointer_reply() and xcb_get_geometry_reply() can return NULL
if e.g. the X server closes or the connection is lost. This needs to
be checked in order to cleanly exit, because the returned pointers are
dereferenced later.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
X2RGB10 tested on both Intel Gen9 and AMD Polaris 11. NV12 tested on
Intel Gen9 only - since it has multiple planes, this requires GetFB2.
Also add some comments to split the list up a bit.
The most useful feature here is the ability to automatically extract the
framebuffer format and modifiers. It also makes support for multi-plane
framebuffers possible, though none are added to the format table in this
patch.
This requires libdrm 2.4.101 (from April 2020) to build, so it includes a
configure check to allow compatibility with existing distributions. Even
with libdrm support, it still won't do anything at runtime if you are
running Linux < 5.7 (before June 2020).
Apparently the changes from 3c9185bf3a
aren't enough; even with that in place, I got errors like this
when trying to build for iOS:
src/libavdevice/avfoundation.m:135:5: error:
'AVCaptureDeviceTransportControlsPlaybackMode' is unavailable: not
available on iOS
AVCaptureDeviceTransportControlsPlaybackMode observed_mode;
^
The capture_started variable was never set, it is simpler to call the stop
functions unconditionally if the interface is available.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also by wrapping the SHM buffer in an AVBufferRef we eliminate yet another
possible memcpy improving performance.
Signed-off-by: Marton Balint <cus@passwd.hu>
Before this commit an av_assert0 would fail if a v4l2 device did not
support a target format.
For example,
./ffmpeg -f v4l2 -codec:v h264 -i /dev/video0 -f mpegts -
would signal an abort if /dev/video0 did not support h264.
The new behaviour is to return an AVERROR(EINVAL) error code. An
av_assert0 has been added to verify this return.
Fixes#6629
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Behave like we do for V4L2_BUF_FLAG_ERROR, implemented in commit 28f20d2ff4 .
For some devices (probably also related to the V4L driver implementation)
it happens that when invoking the ioctl DQBUF, the returned buffer is not
of the expected size. Here are two examples for such occurrences:
[video4linux2,v4l2 @ 0x258b440] Dequeued v4l2 buffer contains 609596 bytes, but 614400 were expected. Flags: 0x00000001.
/dev/video1: Invalid data found when processing input
[video4linux2,v4l2 @ 0x225f440] Dequeued v4l2 buffer contains 609508 bytes, but 614400 were expected. Flags: 0x00000001.
/dev/video1: Invalid data found when processing input
For the ffmpeg CLI tool this means it will stop capturing and exit.
The described behaviour was observed at least with one OmniVision USB
web cam and with some stk1160 devices.
If you search the web for the error message, you will find quite a few
instances of this problem. Some of them experienced on other devices.
Probably fixes ticket #4795
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
missed the category AV_CLASS_CATEGORY_DEVICE_VIDEO_INPUT lead to
ffmpeg -devices doesn't show gdigrab as a input device
FIx#7848
Found-by: dangibson
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Apparently in the new SDK one cannot query if VANC output is supported, so we
will fall back to non-VANC output if enabling the video output with VANC fails.
Fixes ticket #7867.
Signed-off-by: Marton Balint <cus@passwd.hu>
There is a calculation error in xcbgrab_reposition() that breaks
vertical repositioning on follow_mouse. It made the bottom
reposition occur when moving the mouse lower than N pixels after
the capture bottom edge, instead of before.
This commit fixes the calculation to match the documentation.
follow_mouse: centered or number of pixels. The documentation says:
When it is specified with "centered", the grabbing region follows
the mouse pointer and keeps the pointer at the center of region;
otherwise, the region follows only when the mouse pointer reaches
within PIXELS (greater than zero) to the edge of region.
In Windows if using scaling other than 100% then the grabbed window was not captured fully (cropped)
Signed-off-by: Dilshod Mukhtarov <dilshodm@gmail.com>
Allows arrangement of multiple windows such as:
ffmpeg -re -f lavfi -i mandelbrot -f sdl -window_x 1 -window_y 1 mandelbrot -vf waveform,format=yuv420p -f sdl -window_x 641 -window_y 1 waveform -vf vectorscope,format=yuv420p -f sdl -window_x 1 -window_y 481 vectorscop
Some changes by Marton Balint:
- allow negative position (partially or fully out-of-screen positions seem to
be sanitized automatically by SDL (or my WM?), so no special handling is
needed)
- only show window after the position is set
- do not use resizable and borderless flags at the same time, that caused
issues in ffplay
- add docs
Signed-off-by: Marton Balint <cus@passwd.hu>
Make the function static, or else Clang complains with:
error: no previous prototype for function 'decklink_get_attr_string' [-Werror,-Wmissing-prototypes]
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This option is useful for maintaining input synchronization across N
different hardware devices deployed for 'N-way' redundancy.
The system time of different hardware devices should be synchronized
with protocols such as NTP or PTP, before using this option.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also bump the API version requirement to 10.9.5, because on olders versions
there were some reports of crashes using the undocumented, yet available
BMDDeckLinkDeviceHandle.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes ticket #5654.
The linesize can be greater than the minimum required. This copies the
frame taking linesize into account.
Signed-off-by: Rick Kern <kernrj@gmail.com>
Hook in libklvanc and use it for output of EIA-708 captions over
SDI. The bulk of this patch is just general support for ancillary
data for the Decklink SDI module - the real work for construction
of the EIA-708 CDP and VANC line construction is done by libklvanc.
Libklvanc can be found at: https://github.com/stoth68000/libklvanc
Updated to reflect feedback from Marton Balint <cus@passwd.hu>,
Carl Eugen Hoyos <ceffmpeg@gmail.com>, Aaron Levinson
<alevinsn_dev@levland.net>, and Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
If the user provides a valid timecode_format look for timecode of that
format in the capture and if found store it on the video avstream's
metadata.
Slightly modified by Marton Balint to capture per-frame timecode as well.
Signed-off-by: Marton Balint <cus@passwd.hu>
The default memory allocator is limited in the max number of frames available,
and therefore caused frame drops if the frames were not freed fast enough.
Signed-off-by: Marton Balint <cus@passwd.hu>
Formats ARGB32, XRGB32, ABGR32, and XBGR32 were added to V4L2 instead
of ill-defined deprecated RGB32/BGR32 pixel formats.
When pixel format is not specified explicitly FFmpeg tries formats in
order in which they are stored in the table. Therefore formats are
sorted as follows: BGR is preferred over RGB and XBGR is preferred
over ARGB, because it could give better performance by ignoring alpha
component.
Create a buffer from the data instead and use the buffer destructor to free the
DeckLink frame. This avoids a memcpy of the frame data.
Signed-off-by: Marton Balint <cus@passwd.hu>
Show a more useful error message which specifies the required driver version
for the build, and use the correct context in the error message for WIN32.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes the following warnings:
libavdevice/vfwcap.c:331:35: warning: passing argument 1 of 'av_parse_video_size' from incompatible pointer type
libavdevice/vfwcap.c:331:59: warning: passing argument 2 of 'av_parse_video_size' from incompatible pointer type
Reported-by: Reino Wijnsma
avdevice_register_all() is still required to register devices into
lavf (this is required due to lavd being somewhat of a hack).
Signed-off-by: Josh de Kock <josh@itanimul.li>
This reverts commit 0fd475704e.
Revert "lavd: fix iterating of input and output devices"
This reverts commit ce1d77a5e7.
Signed-off-by: Josh de Kock <josh@itanimul.li>
In the previous implementation the first input or output device
was skipped when device_next was called with prev = NULL
Signed-off-by: Felix Matouschek <felix@matouschek.org>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
This commit adds an indev for Android devices on API level 24+ which
uses the Android NDK Camera2 API to capture video from builtin cameras
Signed-off-by: Felix Matouschek <felix@matouschek.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This changes how NTSC VANC is extracted from the buffer. In NTSC the vanc data
is interleaved between luma and chroma, and not just the luma as in high
definition resolutions.
In my testing this allows a decklink card encoding valid NTSC closed
captions to pass the caption data to the x264 encoder.
Updated with reviews from Devin Heitmueller and Marton Balint.
Signed-off-by: Ray Tiley <raytiley@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
avcodec bump missed in 7e8eba2d87
avformat bump missed in ff46124b0d and
0694d87024
avdevice bump missed in 0fd475704e
Signed-off-by: James Almer <jamrial@gmail.com>
Clang applies the missing-prototypes warning on C++ files, whereas
gcc only applies it to C. As a result, the decklink_common.cpp file
fails to build because of missing prototypes in DecklinkDispatch.cpp
(which is #included by decklink_common.cpp).
We don't want to change the actual Blackmagic SDK sources, so
suppress the warning just for that one #include.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
When building with Clang, the following warning is shown:
warning: struct 'IDeckLinkVideoFrame' was previously declared as a
class [-Wmismatched-tags]
The function incorrectly casts IDeckLinkVideoFrame as a struct
instead of a class pointer.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes the following warnings:
libavdevice/lavfi.c:136:16: warning: assignment discards 'const' qualifier from pointer target type
libavdevice/lavfi.c:137:17: warning: assignment discards 'const' qualifier from pointer target type
* commit '07a2b155949eb267cdfc7805f42c7b3375f9c7c5':
Bump major versions of all libraries
A few API deprecated ~2 years ago or more are also postponed here for
varying reasons.
FF_API_LOWRES:
Since this functionality depends on AVStream->codec, i figure the two can
be removed at the same time in the next bump or so.
FF_API_AVCTX_TIMEBASE:
Couldn't get this one to work. Not just libavcodec but apparently also
libavformat and ffmpeg.c expect AVCodecContext->time_base to be set for
decoding. Upon removal some tests report a different generic stream time
base (like 1/25), and others lose packet duration values. I guess it's
somehow tied to the AVStream->codec clusterfuck.
It can be dealt with alongside FF_API_LAVF_AVCTX in the next bump.
FF_API_OLD_FILTER_OPTS_ERROR:
This one is meant to remain after FF_API_OLD_FILTER_OPTS is removed.
Its purpose is displaying the corrected command line using the new syntax
as a suggestion as part of the error message.
Merged-by: James Almer <jamrial@gmail.com>
Can be tested via the following command:
./ffmpeg -i foo.ts -f decklink -vcodec v210 'DeckLink Duo (1)'
Note that the 8-bit support works as it did before, and setting
the pix_fmt isn't required for 10-bit mode. The code defaults to
operating in 8-bit mode when no vcodec is specified, for backward
compatibility.
Updated to reflect feedback from Marton Balint <cus@passwd.hu>
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Add support for enumerating the sources/sinks via the ffmpeg
command line options, as opposed to having to create a real pipeline
and use the "-list_devices" option which does exit() after dumping
out the options.
Note that this patch preserves the existing "-list_devices" option,
but now shares common code for the actual enumeration.
Updated to reflect feedback from Marton Balint <cus@passwd.hu>.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The string is allocated with CFStringGetCString but was being
deallocated with free(), which would intermittently result in
a segmentation fault. Use the correct function for freeing the
allocated CFString.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
In preparation to make VANC decode modular, to support multiple other VANC data.
Signed-off-by: Karthick J <kjeyapal@akamai.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The decklink input pixel format can now be specified with the 'raw_format'
option. The -bm_v210 option is now deprecated.
Signed-off-by: Marton Balint <cus@passwd.hu>
Support for this device has been removed in kernel since v2.6.37. dv1394 has been superseded by libiec61883 which is functionally equivalent.
Signed-off-by: Josh de Kock <josh@itanimul.li>
Signed-off-by: wm4 <nfxjfg@googlemail.com>
In case we are short of queued buffers, at first v4l2_buffer was enqueued to kernel so it's not owned by
user-space anymore. After that it's timestamp field was read, but it might be overwritten by driver at
that moment. It resulted in invalid timestamp sometimes.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
All DRM formats are defined in terms of little-endian words, so RGB formats
like XRGB actually have the elements in the opposite order order in memory
to the order they are in the name.
This does not affect YUYV and similar YUV 4:2:2 formats, which are in the
expected order.
DRM_FORMAT_R8 was added in libdrm 2.4.68.
DRM_FORMAT_R16 was added in libdrm 2.4.82.
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
Decklink devices can output 2, 8 or 16 audio channels along video.
The code was limited to 2 or 8 channels. The commit enables 16 audio
channels (relevant for SDI outputs).
Signed-off-by: Marton Balint <cus@passwd.hu>
v2:
- use uint16_t instead of int to store 10-bit ancillary data
- fix ancillary line numbers for 1080p
- some comments and clarifications as requested by Aaron Levinson
Signed-off-by: Marton Balint <cus@passwd.hu>
This also add supports for 4K DeckLink cards because they always output the
ancillary data in 10-bit.
v2:
- only try teletext decoding for 576i PAL mode
- some comments as requested by Aaron Levinson
Signed-off-by: Marton Balint <cus@passwd.hu>
Using AVOnce as a stack variable makes no sense as the state is lost
when the function exits.
This fixes repeated calls to av(filter/device)_register_all
Purpose: Made minor changes to get the decklink avdevice code to build
using Visual C++.
Notes: Made changes to configure per Hendrik Leppkes's review of first
and second versions of patch. Also made slight alterations per Marton
Balint's reviews.
Comments:
-- configure: Added if enabled decklink section and setting
decklink_indev_extralibs and decklink_outdev_extralibs here for
both mingw and Windows. Also eliminated the setting of these
variables in the mingw section earlier in the file.
-- libavdevice/decklink_common.cpp: Switched the order of the include
of libavformat/internal.h to workaround build issues with Visual
C++. See comment in file for more details.
-- libavdevice/decklink_dec.cpp:
a) Rearranged the include of libavformat/internal.h (for reasons as
described above).
b) Made slight alteration to an argument for call to av_rescale_q() to
workaround a compiler error with Visual C++. This appears to only
be an issue when building C++ files with Visual C++. See comment
in code for more details.
-- libavdevice/decklink_enc.cpp: Rearranged the include of
libavformat/internal.h (for reasons as described above).
Signed-off-by: Aaron Levinson <alevinsn@aracnet.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '92db5083077a8b0f8e1050507671b456fd155125':
build: Generate pkg-config files from Make and not from configure
build: Store library version numbers in .version files
Includes cherry-picked commits 8a34f36593 and
ee164727dd to fix issues.
Changes were also made to retain support for raise_major and build_suffix.
Reviewed-by: ubitux
Merged-by: James Almer <jamrial@gmail.com>
* commit '11a9320de54759340531177c9f2b1e31e6112cc2':
build: Move build-system-related helper files to a separate subdirectory
"ffbuild" directory name is used instead of "avbuild".
Merged-by: Clément Bœsch <u@pkh.me>
* commit '1818a640cfdccd52e97edf13564f45bc3d0d93eb':
build: Fix dependencies for alsa/jack/sndio support
Added explicit enable (which will be automatically added later on in
ee480790c) to actually fix this commit. Without the explicit enables,
alsa, jack and sndio gets disabled.
Also added jack, alsa and sndio to the have list so the HAVE_* are
populated to make (this fixes the SKIPHEADERS chunks).
Merged-by: Clément Bœsch <u@pkh.me>
Purpose: avdevice/decklink: Removed pthread dependency by replacing
semaphore used in code appropriately. Doing so makes it easier to
build ffmpeg using Visual C++ on Windows. This is a contination of
Kyle Schwarz's "avdevice/decklink: Remove pthread dependency" patch
that is available at https://patchwork.ffmpeg.org/patch/2654/ . This
patch wasn't accepted, and as far as I can tell, there was no
follow-up after it was rejected.
Notes: Used Visual Studio 2015 (with update 3) for this.
Comments:
-- configure: Eliminated pthreads dependency for decklink_indev_deps
and decklink_outdev_deps and replaced with threads dependency
-- libavdevice/decklink_common.cpp / .h:
a) Eliminated semaphore and replaced with a combination of a mutex,
condition variable, and a counter (frames_buffer_available_spots).
b) Removed include of pthread.h and semaphore.h and now using
libavutil/thread.h instead.
-- libavdevice/decklink_dec.cpp: Eliminated include of pthread.h and
semaphore.h.
-- libavdevice/decklink_enc.cpp:
a) Eliminated include of pthread.h and semaphore.h.
b) Replaced use of semaphore with the equivalent using a combination
of a mutex, condition variable, and a counter
(frames_buffer_available_spots). In theory, libavutil/thread.h and
the associated code could have been modified instead to add
cross-platform implementations of the sem_ functions, but an
inspection of the ffmpeg source base indicates that there are only
two cases in which semaphores are used (including this one that was
replaced), so it was deemed to not be worth the effort.
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '2f806622e1270d3ed1d41a53049a19673dafbe70':
bktr: Use memset(0) instead of zero initialization for struct sigaction
Merged-by: Clément Bœsch <u@pkh.me>
This disables everything that was deprecated at least 18 months ago.
Readjust the minimum API version as needed, postponing any
API-incompatible changes until the next bump.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This moves work from the configure to the Make stage where it can
be parallelized and ensures that pkgconfig files are updated when
library versions change.
Bug-Id: 449
The framework will allocate a buffer and copy the data to it,
that takes time. But it avoids constently creating and
destroyng the shared memory segment, and that saves more time.
On my setup,
from ~200 to ~300 FPS at full screen (1920×1200),
from ~1400 to ~3300 at smaller size (640×480),
similar to legacy x11grab and confirmed by others.
Plus, shared memory segments are a scarce resource,
allocating potentially many is a bad idea.
Note: if the application were to drop all references to the
buffer before the next call to av_read_frame(), then passing
the shared memory segment as a refcounted buffer would be
even more efficient, but it is hard to guarantee, and it does
not happen with the ffmpeg command-line tool. Using a small
number of preallocated buffers and resorting to a copy when
the pool is exhausted would be a solution to get the better
of both worlds.
sigaction is not defined in standards as a struct starting with another
struct. Some *BSD variants do however, resulting in a warning from the
zero initialization, which this change eliminates.
This partially reverts a92be9b856.
When finding a video mode based on frame size and frame rate,
use AVRational methods instead of simple comparison. Add debug information.
Signed-off-by: Matthias Hunstock <atze@fem.tu-ilmenau.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Provide the stream with the correct fps information when capturing.
Signed-off-by: Matthias Hunstock <atze@fem.tu-ilmenau.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
