Add external encoder VVenC for H266/VVC encoding.
Register new encoder libvvenc.
Add libvvenc to wrap the vvenc interface.
libvvenc implements encoder option: preset,qp,qpa,period,
passlogfile,stats,vvenc-params,level,tier.
Enable encoder by adding --enable-libvvenc in configure step.
Co-authored-by: Christian Bartnik chris10317h5@gmail.com
Signed-off-by: Thomas Siedel <thomas.ff@spin-digital.com>
The vendor has long since switched to Arm, with the last product
reaching their official end-of-life over 11 years ago. Linux support for
the ISA was dropped 7 years ago. More importantly, this architecture was
never supported by upstream GCC, and the vendor fork is stuck at version
4.2, which FFmpeg no longer supports (as per C11 requirement).
Presumably, this is still the case given the lack of vendor support.
Indeed all of the code being removed here consisted of inline assembler
scalar optimisations. A sane C compiler should be able to perform those
automatically nowadays (with the sole exception of fast CLZ detection),
but this is moot as this architecture is evidently dead.
Introduced in 1992, the Alpha was a 64-bit RISC processor designed
to replace the VAX CISC machines sold by Digital Equipment Corporation.
After Digital was acquired by Compaq in 1998 -- who themselves would be
later purchased by Hewlett-Packard, the architecture was phased out over
the following decade. It became effectively defunct in 2007, the last
publicly available processor being the Alpha 21364.
FFmpeg has not added any DSP code for this architecture since lowres2
was introduced in 2012, and it is more than unlikely someone still wishes
to maintain it.
Remove the DSP and support code.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Support for SuperH was dropped over a decade ago. There no longer is any
architecture-specific code to be found, so just remove the corresponding
test. Technically it is still possible to compile FFmpeg as the
"generic" (pure C) architecture.
The DNN filters are useless without a backend.
This will also "fix" Coverity issues #1598288 and #1601718.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Not all C run-times support this, and even then, it will be a while
before distributions provide recent enough versions thereof.
Since this is a trivial system call wrapper, we might just as well call
the corresponding kernel system call directly where the C run-time lacks
support but the kernel headers are new enough (as is the case on Debian
Unstable at the time of writing). In doing so, we need to add a few more
guards as the first suitable kernel (headers) release did not expose the
V, Zba and Zbb extensions.
It reuses e.g. ff_put_pixels8_l2_8() directly even though
it never initializes a QpelDSPContext.
Fixes standalone compilation of the wmv2 encoder (the decoder
already has a qpeldsp dependency via the h263 decoder).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This adds the Linux-specific function call to detect CPU features. Unlike
the more portable auxillary vector, this supports extensions other than
single lettered ones. At this point, FFmpeg already needs this to detect
Zba and Zbb at run-time, and probably will need it for Zvbb in the near
future.
Support will be available in glibc 2.40 onward.
This version is seven years old, and present in Debian oldoldstable,
Ubuntu 20.04 and Leap 15.0.
Allows cleaning up the file substantially. In particular, this is
motivated by the desire to stop relying on init_static_data.
Some versions of xargs don't run any commands if no input is given,
others do run it at least once, causing errors.
Pass -r to xargs to avoid that behaviour and never run empty commands.
The extradata is generated by encoding a dummy frame, then reset
the encoder state by mediacodec flush(). It only works for pixel
format other than AV_PIX_FMT_MEDIACODEC, since I'm not sure how
to create a dummy frame safely with AV_PIX_FMT_MEDIACODEC.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
AImage_delete is introduced in API level 24, while AMediaFormat_new
is introduced in API level 21. We only need API level 21 to support
NDK mediacodec. This change doesn't break or change of
android_camera_indev since camera2ndk still needs API level 24.
Otherwise there are link errors:
LD ffprobe_g
/usr/bin/ld: libavcodec/libavcodec.so: undefined reference to
`ff_dovi_rpu_generate'
/usr/bin/ld: libavcodec/libavcodec.so: undefined reference to
`ff_dovi_configure'
collect2: error: ld returned 1 exit status
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
We need to set up the configuration struct appropriately based on the
codec type, colorspace metadata, and presence/absence of an EL (though,
we currently don't support an EL).
When present, we use the signalled RPU data header to help infer (and
validate) the right values.
Behavior can be controlled by a new DOVIContext.enable flag.
Note that the config.sh file is left without a shebang, this file is
supposed to be sourced into the current environment.
This commit is purely cosmetic.
Signed-off-by: J. Dekker <jdek@itanimul.li>
The preferred way to use LTO is --enable-lto but often times packagers
still end up with -flto in cflags for various reasons. Using grep
on binary object files is brittle and relies on specific object
representation, which in the case of LLVM bitcode, debug information or
other intermediary formats can fail silently.
This patch changes the check to a more commonly used define for GCC
style compilers. More checks may be needed to cover other potential
compilers that don't use the __BYTE_ORDER__ define.
Signed-off-by: J. Dekker <jdek@itanimul.li>
v2.0.0 is already four years old and even newer versions are available on
stable distro releases.
With this we stop setting codec capabilities during static data initialization.
Signed-off-by: James Almer <jamrial@gmail.com>
The LC3 audio codec is the default codec of Bluetooth LE audio.
This is a wrapper over the liblc3 library (https://github.com/google/liblc3).
Signed-off-by: Antoine Soulier <asoulier@google.com>
Since 591e27d1e7 they would
always be compiled even when nothing uses them; for shared
builds the default linker behaviour is to include them
even when not needed.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This change allows users to build libavfomat without support
for Immersive Audio Model by specifying --disable-iamf.
It helps to save on binary size in cases where it's important.
Co-authored-by: James Almer <jamrial@gmail.com>
Signed-off-by: Eugene Zemtsov <eugene@chromium.org>
Signed-off-by: James Almer <jamrial@gmail.com>
C11 required to use ATOMIC_VAR_INIT to statically initialize
atomic objects with static storage duration. Yet this macro
was unsuitable for initializing structures [1] and was actually
unneeded for all known implementations (this includes our
compatibility fallback implementations which simply wrap the value
in parentheses: #define ATOMIC_VAR_INIT(value) (value)).
Therefore C17 deprecated the macro and C23 actually removed it [2].
Since commit 5ff0eb34d2 we default
to C17 if the compiler supports it; Clang warns about ATOMIC_VAR_INIT
in this mode. Given that no implementation ever needed this macro,
this commit stops using it to avoid this warning.
[1]: https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2396.htm#dr_485
[2]: https://en.cppreference.com/w/c/atomic/ATOMIC_VAR_INIT
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The code relies on their presence and would presumably crash
when retrieving in_fmt->name if an encrypted stream with a codec id
without demuxer were encountered.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
C11 provides static assertions via _Static_assert and
provides static_assert as a convenience define for this
in assert.h. Our codebase uses the latter, as _Static_assert
has actually already been deprecated in C23.
Not all toolchains that declare support for C11 actually
support it; e.g. MSVC 19.27 does not support _Static_assert,
but somehow supports static_assert. MSVC 19.27 admits to be
a "preview implementation of the ISO C11 standard",
so this is not surprising (MSVC 19.28 does not come with
this caveat).
Furthermore some FATE boxes [1] use old GCC toolchains (with
only experimental support for C11) where _Static_assert is
supported, but assert.h does not provide the fallback define.
They are broken since the first usage of static_assert.
This commit therefore checks whether static_assert and
_Static_assert work with assert.h included; if not,
configure errors out.
This intentionally drops support for MSVC 19.27. Users like
the old FATE boxes above can still add -Dstatic_assert=_Static_assert
to cflags as a workaround if desired.
[1]: https://fate.ffmpeg.org/report.cgi?time=20240321123620&slot=sh4-debian-qemu-gcc-4.7
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
