For example bitdepth should be printed as 10 instead of 0A. Thanks to Hendrik Leppkes for pointing this out
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes bug id #7386
Muxer overhead calculations was intented for HLS playlist as Apple's mediastreamvalidator tests were failing.
But applying the same fix for DASH manifest proved counterproductive, as Bandwidth can be used for segment name templates.
Applicable only to webm output format.
By default all the segment filenames end with .m4s extension.
When someone chooses webm output format, we recommend they also override the relevant segment name options to end with .webm extension. This patch will issue a warning for he same
Right now segment file format is chosen to be either mp4 or webm based on the codec format.
This patch makes that choice configurable by the user, instead of being decided by the muxer.
Also with this change per-stream choice segment file format(based on codec type) is not possible.
All the output audio and video streams should be in the same file format.
Enables one to test possibly nonstandard formats such as Opus or
FLAC in ISOBMFF, among other things.
This becomes much more useful if output segment format becomes an
option, or if the WebM segment feature gets removed.
It has not ever been working and has not been validated,
Additionally, mention that the segment file names should be changed
to end with webm instead of m4s, which is utilized for ISOBMFF
fragments.
There is a separate muxer(webmdashenc.c) for supporting VP9+webm output in DASH.
Hence in this muxer we will focus on supporting VP9 in MP4
Have verified playout support of VP9+MP4 in Chrome and Firefox.
reference hls support fmp4 file from draft-pantos-http-live-streaming-20
the spec describes version 7 of hls protocol
Suggested-by: Ronak <ronak2121@yahoo.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
The logic is applicable only when use_template is enabled and use_timeline
is disabled. The logic monitors the flow of segment indexes. If a streams's
segment index value is not at the expected real time position, then
the logic corrects that index value.
Typically this logic is needed in live streaming use cases. The network
bandwidth fluctuations are common during long run streaming. Each
fluctuation can cause the segment indexes fall behind the expected real
time position. Without this logic, players will not be able to consume
the content, even after encoder's network condition comes back to
normal state.
availability time of Nth segment = availabilityStartTime + (N*segment duration) - availabilityTimeOffset.
This field helps to reduce the latency by about a segment duration in streaming mode.
@availabilityStartTime specifies the anchor for the computation of the earliest
availability time (in UTC) for any Segment in the Media Presentation.
As per this requirement, the @AvailabilityStartTime should be set to the
wallclock time at which the first frame of the first segment begins encoding.
But, it was getting set only when the first segment was completely ready. Making
the required correction in this patch. This correction is mainly needed to reduce
the latency in live streaming use cases.
Calling 'write_manifest' from 'write_header' was causing creation of
first MPD with invalid values. Ex: zero @duration param value. Also,
the manifest files (MPD or M3U8s) should be created when at-least
one media frame is ready for consumption.
When use_template is enabled and use_timeline is disabled, typically
it is required to generate the segments at the configured segment duration
rate on an average. This commit is particularly needed to handle the
segmentation when video frame rates are fractional like 29.97 or 59.94 fps.
There are use cases where average segment duration needs to be configured
and muxer is expected to maintain the average segment duration. So, using
the name 'min_seg_duration' will be misleading. So, changing the parameter
name to 'seg_duration', where it can be minimum segment duration or average
segment duration based on the use-case. The additional updates needed for
this functinality are made the sub-sequent patches of this patch series.
Currently http end of chunk is signalled implicitly in dashenc_io_open().
This mean playlists http writes would have to wait upto a segment duration to signal end of chunk causing delays.
This patch will fix that problem and improve performance.
This is required for AV playout from master.m3u8.
Otherwise master.m3u8 lists only video-only and/or audio-only streams.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
This is to take full advantage of Common Media Application Format(CMAF).
Now server can generate one content and serve both HLS and DASH players.
Reviewed-by: Steven Liu <lq@onvideo.cn>
In the DASHContext structure, min_seg_duration is declared as an int,
but the AVOption list claimed it was an INT64. Change the option list
to use the correct size, which should fix some initialization errors
seen on big-endian platforms.
Signed-off-by: James Cowgill <jcowgill@debian.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Leads to setting of DefaultDuration in Matroska muxer based on frame rate instead of timebase.
Fixes playback in Chrome.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fix conformance regarding section "3.2.4. Presence of Attributes and
Element" of the "Guidelines for Implementation: DASH-IF Interoperability
Points V4.1" (http://dashif.org/guidelines/)
Signed-off-by: Anton Schubert <ischluff@mailbox.org>
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 1b8ef01f04 ("dashenc: add webm support")
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch is inspired by the ffmpeg webm_chunk muxer and fixes that all resulting
tracks have the same track number.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Anton Schubert <ischluff@mailbox.org>
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'dce2929efa8e82b0832a828f7e8cb81ff8c20a4e':
dashenc: copy language and role metadata from streams assigned to sets
Merged-by: Rodger Combs <rodger.combs@gmail.com>
* commit 'efd2fc41b3f0749f9715d50b581f22bbaa8c5b99':
dashenc: allow assigning all streams of a media type to an AdaptationSet
Merged-by: Rodger Combs <rodger.combs@gmail.com>
* commit '3d23a5f96ad72961c14ba3a0c2add8f2ab374b61':
dashenc: add support for assigning streams to AdaptationSets
Merged-by: Rodger Combs <rodger.combs@gmail.com>
* commit '9df9309d233f59d9706444a1e24ac24139f2640d':
dashenc: calculate stream bitrate from first segment if not available
Merged-by: Rodger Combs <rodger.combs@gmail.com>
move from dashenc, move DASHTmplId and dash_fill_tmpl_params to
dash.c, they will be used by dash demuxer and dash muxer.
v2 fixed:
1. rename common file from dashcomm.* to dash.*
Suggested-by: Hendrik Leppkes <h.leppkes@gmail.com>
v3 fixed:
1. rename header file pre defined
2. add ff_ prefix for the internal API
Suggested-by: James Almer <jamrial@gmail.com>
Suggested-by: Timo Rothenpieler <timo@rothenpieler.org>
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Steven Liu <lq@onvideo.cn>
Skip the codec_tag altogether here, to let the user (try to) set
whichever codec/tag is preferred; the individual chained muxer will
reject invalid codecs anyway.
(cherry picked from commit 61f589e31e)
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Currently, the tags enforced and set on the segmenter muxer level
mismatch what the mp4/ismv muxer uses (since 713efb2c0d).
Skip the codec_tag altogether here, to let the user (try to) set
whichever codec/tag is preferred; the individual chained muxer will
reject invalid codecs anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '1920382aa9f21d7ed1a3c2214990da8d2b067a92':
dashenc: add option to provide UTC timing source
Also use E instead of AV_OPT_FLAG_ENCODING_PARAM to be consistent with
the other AVOption.
Merged-by: Clément Bœsch <u@pkh.me>
* commit '95f1004bdfdf2d26c330c1d4b7c4ac9352d60b18':
dashenc: add mandatory id to AdaptationSet and Period in manifest
Merged-by: Clément Bœsch <u@pkh.me>
Provides a way to change bandwidth parameter inside DASH manifest after a non-CBR H.264 encoding.
Caller now is able to compute the bitrate by itself, after all packets have been written, and then set that value in AVFormatContext->streams->codecpar->bit_rate before calling av_write_trailer. As a result that value will be set in DASH manifest.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Skips using temporary files when outputting to a protocol other than
"file", which enables dash to output content over network
protocols. The logic has been copied from the HLS format.
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use webm muxer for VP8, VP9 and Opus codec, mp4 muxer otherwise.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
The dash_write function drops data, if no IOContext is initialized.
Since the mp4 muxer is used in "frag_custom" mode, data is only
written when calling av_write_frame(NULL) explicitly and thus
there will be no data loss.
To add support for webm as subordinate muxer, which doesn't have
such a mode, a dynamic buffer is required to provide an always
initialized IOContext.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously all mapped streams of a media type (video, audio) where assigned
to a single AdaptationSet. Using the DASH live profile it is mandatory, that
the segments of all representations are aligned, which is currently not
enforced. This leads to problems when using video streams with different
key frame intervals. So to play safe, default to one AdaptationSet per stream,
unless overwritten by explicit assignment.
To get the old assignment scheme, use
-adaptation_sets "id=0,streams=v id=1,streams=a"
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Using the characters "v" or "a" instead of stream index numbers for assigning
streams in the adaption_set option, all streams matching that given type will
be added to the AdaptationSet.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Also makes sure all streams are assigned to exactly one AdaptationSet.
This patch is originally based partially on code by Vignesh Venkatasubramanian.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Bandwidth information is required in the manifest, but not always
provided by the demuxer. In that case calculate the bandwith based
on the size and duration of the first segment.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
The current implementation creates new segments comparing
pkt->pts - first_pts > nb_segs * min_seg_duration
This works fine, but if the keyframe interval is smaller than "min_seg_duration"
segments shorter than the minimum segment duration are created.
Example: keyint=50, min_seg_duration=3000000
segment 1 contains keyframe 1 (duration=2s < total_duration=3s)
and keyframe 2 (duration=4s >= total_duration=3s)
segment 2 contains keyframe 3 (duration=6s >= total_duration=6s)
segment 3 contains keyframe 4 (duration=8s < total_duration=9s)
and keyframe 5 (duration=10s >= total_duration=9s)
...
Segment 2 is only 2s long, shorter than min_seg_duration = 3s.
To fix this, new segments are created based on the actual written duration.
Otherwise the option name "min_seg_duration" is misleading.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
If set, adds a UTCTiming tag in the manifest.
This is part of the recommendations listed in the "Guidelines for
Implementations: DASH-IF Interoperability Points" [1][2]
Section 4.7 describes means for the Availability Time Synchronization.
A usable default is "https://time.akamai.com/?iso"
[1] http://dashif.org/guidelines/
[2] http://dashif.org/wp-content/uploads/2016/12/DASH-IF-IOP-v4.0-clean.pdf
(current version as of writing)
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
to avoid rebuffering on the clientside for difficult network conditions.
Signed-off-by: Anton Schubert <ischluff@mailbox.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
Appends Z to timestamp to force ISO8601 datetime parsing as UTC.
Without Z, some browsers (Chrome) interpret the timestamp as
localtime and others (Firefox) interpret it as UTC.
Signed-off-by: Anton Schubert <ischluff@mailbox.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
This also deprecates our old duplicated callbacks.
* commit '9f61abc8111c7c43f49ca012e957a108b9cc7610':
lavf: allow custom IO for all files
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Some (de)muxers open additional files beyond the main IO context.
Currently, they call avio_open() directly, which prevents the caller
from using custom IO for such streams.
This commit adds callbacks to AVFormatContext that default to
avio_open2()/avio_close(), but can be overridden by the caller. All
muxers and demuxers using AVIO are switched to using those callbacks
instead of calling avio_open()/avio_close() directly.
(de)muxers that use the URLProtocol layer directly instead of AVIO
remain unconverted for now. This should be fixed in later commits.
DASH manifest should have framerate specified as an attribute in the
AdaptationSet element and Representation elements. Though ISO/IEC
23009-1:2014 doesn't seem to define frameRate as a required attribute,
it is at least optional, and DASH-IF IOP 3.0 seems to require it. See
section 3.2.4 of http://dashif.org/w/2015/04/DASH-IF-IOP-v3.0.pdf
In the event that avg_frame_rate is not set in the muxer, we ignore the
frameRate tag altogther.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'b8d2630c5327d2818d05c8a48be0417905d8e0fd':
dashenc: Reduce the segment duration if cutting out parts with edit lists
Merged-by: Michael Niedermayer <michaelni@gmx.at>
id should be an integer, not a string. It is also optional, so use
contentType instead which is the proper attribute for these values.
This addresses ticket #4545, fixing an MPD validation error.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure that the time + duration of the first segment
matches the start time of the next segment for e.g. AAC audio
with encoder delay.
Signed-off-by: Martin Storsjö <martin@martin.st>
id should be an integer, not a string. It is also optional, so use
contentType instead which is the proper attribute for these values.
This fixes an MPD validation error.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '2cc3936599b6fc63143036659653d1be0624360f':
dashenc: Add a publishTime field in dynamic manifests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3041183677bda0a431b36e96a2c76617abaa8183':
dashenc: Heuristically fill in the duration of packets that need it
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids that the mp4 muxer does a similar heuristic, adjusting
the timestamps in a way that the dash muxer doesn't know the actual
timestamps written to the file in the end. By making sure that the
mp4 muxer internal heuristic isn't applied, we know the exact
timestamps written to file, so that the timestamps in manifest match
the files.
Signed-off-by: Martin Storsjö <martin@martin.st>
The mov muxer already supports picking up extradata that wasn't
present during the avformat_write_header call - we just need to
propagate it. Since the dash muxer uses delay_moov, we have time
up until the first segment is written to get extradata filled in.
Also update the codec description string when the extradata becomes
available.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '8e32b1f0963d01d4f5d4803eb721f162e0d58d9a':
libavformat: Use ffio_free_dyn_buf where applicable
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3a724a7f3ba7fa766c6a6f0924a15cc742031b8d':
dashenc: Use inttypes.h macros for format strings instead of %lld
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '46808fdf04ab113df374157b90b506eb3110daf2':
movenc: Enable editlists by default if delay_moov is enabled
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This should be more correct. This also should give more sensible
switching between video streams with different amount of b-frame
delay.
The current dash.js release (1.2.0) fails to start playback of
such files from the start (if the start pts is > 0), but this has
been fixed in the current git version of dash.js.
Also enable the use of edit lists, so that streams in many cases
start at pts=0.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'b91a5757fcbf723da99b05b298a6f820271dbc2b':
dashenc: Fix writing of timelines that don't start at t=0
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When writing an explicit time, reset the cur_time variable to this
value as well. This avoids writing excessive time attributes for each
segment in the timeline, as long as the segments are continuous.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '456e93bfdd4cbc5e995dea415019abd0703d0e16':
dashenc: Adjust the start time of a segment to the end of the previous segment
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2f628d5943c12389c07d652d23d3916997f9f0f6':
dashenc: Write segment timelines properly if the timeline has gaps
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is the same adjustment that the mp4 muxer does to the start
timestamp of fragments, since the timestamp of a sample in an mp4
file is implicit from the sum of earlier sample durations.
This avoids gaps in the timeline (which can stop dash.js from
playing it back), and makes sure the timestamp on the segmenter
level matches what the mp4 muxer actually writes into the segments.
This is only an issue if the AVPacket duration of the last
packet of a segment doesn't point to the actual start timestamp
of the next packet (the first in the next segment).
Signed-off-by: Martin Storsjö <martin@martin.st>
Write a new start time if the duration of the previous segment
didn't match the start of the next one. Check that segments
actually are continuous before writing a repeat count.
This makes sure timestamps deduced from the timeline actually
match the real start timestamp as written in filenames (if
using a template containing $Time$).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e737a4aaafcb1d761b7f96043c2f83ce742c64ae':
dashenc: Change the duration fields to 64 bit
Conflicts:
libavformat/dashenc.c
See: e65849a70b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For the last_duration field, it's mostly theoretical, but the
total_duration field more probably may need to actually be 64 bit.
Bug-Id: CID 1254944
Signed-off-by: Martin Storsjö <martin@martin.st>
As the manifest/segments are flushed to disk, log to stderr the
progress, when in verbose logging mode
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes the build on compilers that interpreted the earlier
code as a variable length array (which we intentionally disallow).
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows one to specify templated segment names for init-segments,
media-segments, and for the base-url in the case of single-file.
Signed-off-by: Martin Storsjö <martin@martin.st>
This reverts commit b9d08c77a4.
After taking MoveFileEx into use, we can replace files with renames
on windows as well.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'b9d08c77a44390b0848c06f20bc0e9e951ba6a3c':
lavf: Don't try to update files atomically with renames on windows
Conflicts:
libavformat/dashenc.c
libavformat/hdsenc.c
libavformat/internal.h
libavformat/smoothstreamingenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
