Since the VDPAU pixel format does not distinguish between different
VDPAU video surface chroma types, we need another way to pass this
data to the application.
Originally VDPAU in libavcodec only supported decoding to 8-bits YUV
with 4:2:0 chroma sampling. Correspondingly, applications assumed that
libavcodec expected VDP_CHROMA_TYPE_420 video surfaces for output.
However some of the new HEVC profiles proposed for addition to VDPAU
would require different depth and/or sampling:
http://lists.freedesktop.org/archives/vdpau/2014-July/000167.html
...as would lossless AVC profiles:
http://lists.freedesktop.org/archives/vdpau/2014-November/000241.html
To preserve backward binary compatibility with existing applications,
a new av_vdpau_bind_context() flag is introduced in a further change.
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This can be used by the application to signal its ability to cope with
video surface of types other than 8-bits YUV 4:2:0.
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This carries the pixel format that would be used if it were not for
hardware acceleration. This is equal to AVCodecContext.pix_fmt if
hardware acceleration is not in use.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is the same logic as is invoked on AVFMT_TS_NEGATIVE,
but which can be enabled manually, or can be enabled
in muxers which only need it in certain conditions.
Also allow using the same mechanism to force streams to start
at 0.
Signed-off-by: Martin Storsjö <martin@martin.st>
Similarly to the omit_tfhd_offset flag added in e7bf085b, this
avoids writing absolute byte positions to the file, making them
more easily streamable.
This is a new feature from 14496-12:2012, so application support
isn't necessarily too widespread yet (support for it in libav was
added in 20f95f21f in July 2014).
Signed-off-by: Martin Storsjö <martin@martin.st>
Since av_gettime() is used in a number of places where actual
real time clock is required, the monotonic clock introduced in
ebef9f5a5 would have consequences that are hard to handle. Instead
split it into a separate function that can be used in the cases
where only relative time is desired.
On platform where no monotonic clock is available, the difference
between the two av_gettime functions is not clear, and one could
mistakenly use the relative clock where an absolute one is
required. Therefore add an offset, to make it evident that the
time returned from av_gettime_relative never is actual current
real time, even though it is based on av_gettime.
Based on a patch by Olivier Langlois.
Signed-off-by: Martin Storsjö <martin@martin.st>
When decoding, this field holds the inverse of the framerate that can be
written in the headers for some codecs. Using a field called 'time_base'
for this is very misleading, as there are no timestamps associated with
it. Furthermore, this field is used for a very different purpose during
encoding.
Add a new field, called 'framerate', to replace the use of time_base for
decoding.
Decoding acceleration may work even if the codec level is higher than
the stated limit of the VDPAU driver. Or the problem may be considered
acceptable by the user. This flag allows skipping the codec level
capability checks and proceed with decoding.
Applications should obviously not set this flag by default, but only if
the user explicitly requested this behavior (and presumably knows how
to turn it back off if it fails).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Currently, the amount of padding inserted at the beginning by some audio
encoders, is exported through AVCodecContext.delay. However
- the term 'delay' is heavily overloaded and can have multiple different
meanings even in the case of audio encoding.
- this field has entirely different meanings, depending on whether the
codec context is used for encoding or decoding (and has yet another
different meaning for video), preventing generic handling of the codec
context.
Therefore, add a new field -- AVCodecContext.initial_padding. It could
conceivably be used for decoding as well at a later point.
This function provides an explicit VDPAU device and VDPAU driver to
libavcodec, so that the application is relieved from codec specifics
and VdpDevice life cycle management.
A stub flags parameter is added for future extension. For instance, it
could be used to ignore codec level capabilities (if someone feels
dangerous).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The -hls_allow_cache parameter enables explicitly setting the
EXT-X-ALLOW-CACHE tag in the manifest file. That tag indicates
whether the client MAY or MUST NOT cache downloaded media
segments for later replay.
Valid values are 1 (=YES) or 0 (=NO) and the EXT-X-ALLOW-CACHE
will not show in the manifest for other values (or if
-hls_allow_cache is not used.
Signed-off-by: Martin Storsjö <martin@martin.st>
In order to support metadata being set as an option, it's necessary to be able
to set dictionaries as values.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The only flags, for now, indicate if metadata was updated and are set after each call to
av_read_frame(). This comes with the caveat that, on stream start, it might not be set properly
as packets might be buffered in AVFormatContext.packet_buffer before being given to the user
in av_read_frame().
Signed-off-by: Anton Khirnov <anton@khirnov.net>
It allows attaching other external, opaque data to the frame and passing it
through the reordering process, for cases when the caller wants other data
than just the plain packet pts. There is no way to cleanly achieve this
without the field.
The rationale is that you have a packed format in form
<greyscale sample> <alpha sample> <greyscale sample> <alpha sample>
and shortening greyscale to 'G' might make one thing about Greenscale instead.
An alias pixel format and color space name are provided for compatibility.
