If we for some unexplicable reason didn't pick up getaddrinfo
at configure, the default, IPv4-only, fallback should be good enough.
This effectively reverts 6023d84a2b.
Signed-off-by: Martin Storsjö <martin@martin.st>
Parse the playlist to recover the start sequence and previously
generated segments and continue muxing from there.
Mainly useful for near-seamless recovery in live scenarios.
This reduces the need for an edit list; streams that start with
e.g. dts=-1, pts=0 can be encoded as dts=0, pts=0 (which is valid
in mov/mp4) by shifting the dts values of all packets forward.
This avoids the need for edit lists for such streams (while they
still are needed for audio streams with encoder delay).
This eases conformance with the DASH-IF interoperability guidelines.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes the currently semi-public avpriv_aac_parse_header() function
private to libavcodec and adds a proper public API function to return
the parts of the ADTS header required in libavformat.
The function currently accepts a PutBitContext and a GetBitContext,
which hardcodes their sizes into the lavc ABI. Since the function is
quite small and only called in a few places, the simplest solution is
making it inline, thus avoiding a runtime dependency completely.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The same warning is issued when actual unknown spherical metadata is
found further down in the function.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Replicates lavf/librtmp.c behavior in L145-152 and rtmpdump's
behavior with "--swfVfy <url>" passing the url to swfUrl.
Fixes bug 943.
Signed-off-by: Martin Storsjö <martin@martin.st>
These values are defined to be 32bit in the specification,
so it makes more sense to store them as fixed width.
Based on a patch by Micahel Niedermayer <michael@niedermayer.cc>.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This disables everything that was deprecated at least 18 months ago.
Readjust the minimum API version as needed, postponing any
API-incompatible changes until the next bump.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Decodes YUV 4:2:2 10-bit and RGB 12-bit files.
Older files with more subbands, skips, Bayer, alpha not supported.
Further fixes and refactorings by Anton Khirnov <anton@khirnov.net>,
Diego Biurrun <diego@biurrun.de>, Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The size field in the header/footer accounts for the entire APE tag
structure except the 32 bytes from header, for compatibility with
APEv1.
Signed-off-by: James Almer <jamrial@gmail.com>
CC: libav-stable@libav.org
Signed-off-by: Anton Khirnov <anton@khirnov.net>
According to the spec[1], a value of 0 means the footer is present and a value
of 1 means it's absent, the exact opposite of header presence flag where 1
means present and 0 absent.
The reason for this is compatibility with APEv1 tags, where there's no header,
footer presence was mandatory for all files, and the flags field was a zeroed
reserved field.
[1] http://wiki.hydrogenaud.io/index.php?title=Ape_Tags_Flags
Signed-off-by: James Almer <jamrial@gmail.com>
CC: libav-stable@libav.org
Signed-off-by: Anton Khirnov <anton@khirnov.net>
ts_offset was added to cluster timecode, but then effectively subtracted
back off the block timecode
When setting initial_padding for an audio stream, the timestamps are
written incorrectly to the mkv file. cluster timecode gets written
as pts0 + ts_offset which is correct, but then block timecode gets
written as pts - cluster timecode which expanded is
pts - (pts0 + ts_offset). Adding cluster and block tc back together:
cluster + block = (pts0 + ts_offset) + (pts - (pts0 + ts_offset)) = pts
But the result should be pts + ts_offset since demux will subtract the
CodecDelay element from pts and set initial_padding to CodecDelay.
This patch gives the correct result.
Some muxers may use the BMP_HEADER Format Data size instead
of the ASF-specific one.
Bug-Id: 1020
CC: libav-stable@libav.org
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The AVFormat stream count can be larger due external factors, such as
an id3 tag appended.
Avoid an out of bound read.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This swaps which field is set when the Window Acknowledgement Size
and Set Peer BW packets are received, renames the fields in
order to clarify their role further and adds verbose comments
explaining their respective roles and how well the code currently
does what it is supposed to.
The Set Peer BW packet tells the receiver of the packet (which
can be either client or server) that it should not send more data
if it already has sent more data than the specified number of bytes,
without receiving acknowledgement for them. Actually checking this
limit is currently not implemented.
In order to be able to check that properly, one can send the
Window Acknowledgement Size packet, which tells the receiver of the
packet that it needs to send Acknowledgement packets
(RTMP_PT_BYTES_READ) at least after receiving a given number of bytes
since the last Acknowledgement.
Therefore, when we receive a Window Acknowledgement Size packet,
this sets the maximum number of bytes we can receive without sending
an Acknowledgement; therefore when handling this packet we should set
the receive_report_size field (previously client_report_size).
Signed-off-by: Martin Storsjö <martin@martin.st>
Also rename comments and log messages accordingly,
and add clarifying comments for some hardcoded values.
The previous names were taken from older, reverse engineered
references.
These names match the official public rtmp specification, and
matches the names used by wirecast in annotating captured
streams. These names also avoid hardcoding the roles of server
and client, since the handling of them is irrelevant of whether
we act as server or client.
The RTMP_PT_PING type maps to RTMP_PT_USER_CONTROL.
The SERVER_BW and CLIENT_BW types are a bit more intertwined;
RTMP_PT_SERVER_BW maps to RTMP_PT_WINDOW_ACK_SIZE and
RTMP_PT_CLIENT_BW maps to RTMP_PT_SET_PEER_BW.
Signed-off-by: Martin Storsjö <martin@martin.st>
The string codec name need not be as long as the value we are
comparing it to, so memcmp may make decisions derived from
uninitialised data that valgrind then complains about (though the
overall result of the function will always be the same). Use
strncmp instead, which will stop at the first zero byte and
therefore not encounter this issue.
Use webm muxer for VP8, VP9 and Opus codec, mp4 muxer otherwise.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
The dash_write function drops data, if no IOContext is initialized.
Since the mp4 muxer is used in "frag_custom" mode, data is only
written when calling av_write_frame(NULL) explicitly and thus
there will be no data loss.
To add support for webm as subordinate muxer, which doesn't have
such a mode, a dynamic buffer is required to provide an always
initialized IOContext.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously all mapped streams of a media type (video, audio) where assigned
to a single AdaptationSet. Using the DASH live profile it is mandatory, that
the segments of all representations are aligned, which is currently not
enforced. This leads to problems when using video streams with different
key frame intervals. So to play safe, default to one AdaptationSet per stream,
unless overwritten by explicit assignment.
To get the old assignment scheme, use
-adaptation_sets "id=0,streams=v id=1,streams=a"
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Using the characters "v" or "a" instead of stream index numbers for assigning
streams in the adaption_set option, all streams matching that given type will
be added to the AdaptationSet.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Also makes sure all streams are assigned to exactly one AdaptationSet.
This patch is originally based partially on code by Vignesh Venkatasubramanian.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Bandwidth information is required in the manifest, but not always
provided by the demuxer. In that case calculate the bandwith based
on the size and duration of the first segment.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
The current implementation creates new segments comparing
pkt->pts - first_pts > nb_segs * min_seg_duration
This works fine, but if the keyframe interval is smaller than "min_seg_duration"
segments shorter than the minimum segment duration are created.
Example: keyint=50, min_seg_duration=3000000
segment 1 contains keyframe 1 (duration=2s < total_duration=3s)
and keyframe 2 (duration=4s >= total_duration=3s)
segment 2 contains keyframe 3 (duration=6s >= total_duration=6s)
segment 3 contains keyframe 4 (duration=8s < total_duration=9s)
and keyframe 5 (duration=10s >= total_duration=9s)
...
Segment 2 is only 2s long, shorter than min_seg_duration = 3s.
To fix this, new segments are created based on the actual written duration.
Otherwise the option name "min_seg_duration" is misleading.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
If set, adds a UTCTiming tag in the manifest.
This is part of the recommendations listed in the "Guidelines for
Implementations: DASH-IF Interoperability Points" [1][2]
Section 4.7 describes means for the Availability Time Synchronization.
A usable default is "https://time.akamai.com/?iso"
[1] http://dashif.org/guidelines/
[2] http://dashif.org/wp-content/uploads/2016/12/DASH-IF-IOP-v4.0-clean.pdf
(current version as of writing)
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Servers seem to be happy to receive the wrapped-around value as long
as they receive a report, otherwise they timeout.
Initially reported and analyzed by Thomas Bernhard.
to avoid rebuffering on the clientside for difficult network conditions.
Signed-off-by: Anton Schubert <ischluff@mailbox.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
Appends Z to timestamp to force ISO8601 datetime parsing as UTC.
Without Z, some browsers (Chrome) interpret the timestamp as
localtime and others (Firefox) interpret it as UTC.
Signed-off-by: Anton Schubert <ischluff@mailbox.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
If a read fails, the current code will free the data but leave the size
non-zero. Make sure the size is zeroed in such a case.
CC: libav-stable@libav.org
Bug-Id: 1001
Found-By: Kamil Frankowicz
Signed-off-by: Sean McGovern <gseanmcg@gmail.com>
A negative chunk size is illegal and would end up used as
length for memcpy, where it would lead to memory accesses
out of bounds.
Found-by: Paul Cher <paulcher@icloud.com>
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This moves work from the configure to the Make stage where it can
be parallelized and ensures that pkgconfig files are updated when
library versions change.
Bug-Id: 449
When the input string is too large, so the second condition in if ()
fails, the code will erroneously execute the else branch, indexing the
mac_to_unicode table with a negative index.
CC: libav-stable@libav.org
Bug-Id: 1000
Found-By: Kamil Frankowicz
When receiving fragmented packets, the first packet declares the size,
and the later ones normally are small follow-on packets that don't repeat
the size and the other header fields. But technically, the later fragments
also can have a full header, declaring a different size than the previous
packet.
If the follow-on packet declares a larger size than the initial one, we
could end up writing outside of the allocation.
This fixes out of bounds writes.
Found-by: Paul Cher <paulcher@icloud.com>
Reviewed-by: Paul Cher <paulcher@icloud.com>
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This seems to have been added by mistake in 11de006b, by not
noticing the negation for the existing condition. This block does
not contain any code that accesses the codec field in AVStream.
This function is meant to serve as a complement to compute_pkt_fields2,
which is guarded by FF_API_COMPUTE_PKT_FIELDS2 && FF_API_LAVF_AVCTX.
Signed-off-by: Martin Storsjö <martin@martin.st>
This implements Spherical Video V1 and V2, as described in the
spatial-media collection by Google.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Supporting the system was a nice joke for the 9 release, but it has
run its course. Nowadays Plan 9 receives no testing and has no
practical usefulness.
