There is no MMX code for blockdsp after commit
ee551a21dd, so use declare_func
instead of declare_func_emms() to also test that we are not
in MMX mode after return.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There is no MMX code for vc1_inv_trans_8x8 or
vc1_unescape_buffer, so use declare_func instead of
declare_func_emms() to also test that we are not in MMX
mode after return.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There is no MMX code for loop filters since commit
6a551f1405, so use declare_func
instead of declare_func_emms() to also test that we are not
in MMX mode after return.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The data in SGI images is stored planar, so exporting
it via planar pixel formats is natural.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Unfortunately, it is common, and will remain so, that the Bit
manipulations are not enabled at compilation time. This is an official
policy for Debian ports in general (though they do not support RISC-V
officially as of yet) to stick to the minimal target baseline, which
does not include the B extension or even its Zbb subset.
For inline helpers (CPOP, REV8), compiler builtins (CTZ, CLZ) or
even plain C code (MIN, MAX, MINU, MAXU), run-time detection seems
impractical. But at least it can work for the byte-swap DSP functions.
This check is intended to be avoid buffer overflows,
yet there are four problems with it:
1. It has an in-built off-by-one error: len == out_end - out
is perfectly fine and nothing to worry about.
This off-by-one error led to the pixel in the lower-right corner
not being set properly for the back frame of the sample from
the rl2 FATE-test. This pixel is copied to every frame which
is the reason for the update to the reference file of said test.
With this patch, the output of the decoder matches the output
as captured from the reference decoder* (apart from the fact
that said reference somehow lacks the top part of the frame
(copied over from the background frame)).
2. Given that the stride of the buffer may be different
from the width of the video (despite one pixel taking one byte),
there is a second check lateron making the first check redundant
(if one returns immediately; a simple break at the second check
is not sufficient, because it only exits the inner loop).
3. The check is based around the assumption of the stride being
positive (it has this in common with the other check which
will be fixed in a future commit).
4. Even after fixing the off-by-one error, the check in
question is still triggered by all the non-background frames
in the FATE sample as well as by A1100100.RL2. In all these
cases, they use len == 255 and val == 128. For videos with
background frame this just means "copy from the background
frame", which would be done anyway lateron.* Yet for videos
without it copying it is necessary to avoid leaving
uninitialized parts in the video.
*: Available in https://samples.mplayerhq.hu/game-formats/voyeur-rl2/
**: Due to this, the code that copies the rest from the
back frame is no longer executed for any of the samples
available on the sample server. Given that these are only
the files from the demo version of this game, I don't know
whether this code is executed for any file in existence or not.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
RVV defines a total of 12 different extensions, including:
- 5 different instruction subsets:
- Zve32x: 8-, 16- and 32-bit integers,
- Zve32f: Zve32x plus single precision floats,
- Zve64x: Zve32x plus 64-bit integers,
- Zve64f: Zve32f plus Zve64x,
- Zve64d: Zve64f plus double precision floats.
- 6 different vector lengths:
- Zvl32b (embedded only),
- Zvl64b (embedded only),
- Zvl128b,
- Zvl256b,
- Zvl512b,
- Zvl1024b,
- and the V extension proper: equivalent to Zve64f and Zvl128b.
In total, there are 6 different possible sets of supported instructions
(including the empty set), but for convenience we allocate one bit for
each type sets: up-to-32-bit ints (RVV_I32), floats (RVV_F32),
64-bit ints (RVV_I64) and doubles (RVV_F64).
Whence the vector size is needed, it can be retrieved by reading the
unprivileged read-only vlenb CSR. This should probably be a separate
helper macro if needed at a later point.
This introduces compile-time and run-time CPU detection on RISC-V. In
practice, I doubt that FFmpeg will ever see a RISC-V CPU without all of
I, F and D extensions, and if it does, it probably won't have run-time
detection. So the flags are essentially always set.
But as things stand, checkasm wants them that way. Compare the ARMV8
flag on AArch64. We are nowhere near running short on CPU flag bits.
This also tests writing slice data in the unaligned mode
(some of these files use CAVLC) as well as updating
side data as well as parsing ISOBMFF avcc extradata.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
~4x faster than the C version.
The shuffles in the 15pt dim1 are seriously expensive. Not happy with it,
but I'm contempt.
Can be easily converted to pure AVX by removing all vpermpd/vpermps
instructions.
Old one was written with the assumption only even inputs would be given.
This very messy replacement supports even and odd inputs, and supports
AVX2 for extra speed. The buffers given are usually quite big (4k samples),
so the speedup is worth it.
The new SSE version is still faster than the old inline asm version by 33%.
Also checkasm is provided to make sure this monstrosity works.
This fixes some FATE tests.
The aim of this test is to show the interleavement
of the file generated in the first pass; so make the
interleavement queue in the framecrc muxer in the second
pass as small as possible so that the framecrc muxer does not
fix wrong interleavement of the input file behind our backs.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
enc_dec is designed for raw input and output and computes
the PSNR between these two. The input of the shortest-sub
test is the idx file of a vobsub sub+idx combination
and the output is the output of framecrc of said vobsub
subtitle muxed into Matroska together with a synthesized
video. Calculating the PSNR between these two files makes
no sense, therefore switch to a transcode test, where
the ref file file contains the output of framecrc directly,
making the interleavement better visible in the ref file
at the cost of a larger ref file (>400 lines).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also covers writing mastering display metadata.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Do this by setting AVCodecInternal.pad_samples.
This prevents reading into the frame's padding and writing
into the packet's padding.
This actually happened in our FATE tests (where the number of samples
is 2 mod 4), which therefore needed to be updated.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
APTX decodes four bytes of input to four stereo samples; APTX HD
does the same with six bytes of input. So it can be easily supported
in av_get_audio_frame_duration().
This fixes invalid durations and (derived) timestamps of demuxed
APTX HD packets and therefore fixed the timestamp in the aptx-hd
FATE test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
We have de- and encoders for APTX and APTX HD, yet not FATE tests.
This commit therefore adds a transcoding test to utilize them.
Furthermore, during creating these tests it turned out that
the duration is set incorrectly for APTX HD. This will be fixed
in a future commit.
(Thanks to Andriy Gelman for finding an issue in an earlier version
that used a 192kHz input sample which does not work reliably accross
platforms.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Since introducing the various packed formats used by VAAPI (and p012),
we've noticed that there's actually a gap in how
av_find_best_pix_fmt_of_2 works. It doesn't actually assign any value
to having the same bit depth as the source format, when comparing
against formats with a higher bit depth. This usually doesn't matter,
because av_get_padded_bits_per_pixel() will account for it.
However, as many of these formats use padding internally, we find that
av_get_padded_bits_per_pixel() actually returns the same value for the
10 bit, 12 bit, 16 bit flavours, etc. In these tied situations, we end
up just picking the first of the two provided formats, even if the
second one should be preferred because it matches the actual bit depth.
This bug already existed if you tried to compare yuv420p10 against p016
and p010, for example, but it simply hadn't come up before so we never
noticed.
But now, we actually got a situation in the VAAPI VP9 decoder where it
offers both p010 and p012 because Profile 3 could be either depth and
ends up picking p012 for 10 bit content due to the ordering of the
testing.
In addition, in the process of testing the fix, I realised we have the
same gap when it comes to chroma subsampling - we do not favour a
format that has exactly the same subsampling vs one with less
subsampling when all else is equal.
To fix this, I'm introducing a small score penalty if the bit depth or
subsampling doesn't exactly match the source format. This will break
the tie in favour of the format with the exact match, but not offset
any of the other scoring penalties we already have.
I have added a set of tests around these formats which will fail
without this fix.
These tests test both the demuxer as well as the muxer
wherever possible. It is not always possible due to the fact
that the muxer supports more codecs than the demuxer.
The spdif demuxer does currently not set the need_parsing flag.
If one were to set this to AVSTREAM_PARSE_FULL, the test results
would change as follows:
- For spdif-aac-remux, the packets are currently padded to 16bits,
i.e. if the actual packet size is odd, there is a padding byte.
The parser splits this byte away into a one byte packet of its own.
Insanely, these one byte packets get the same duration as normal
packets, i.e. timing is ruined.
- The DCA-remux tests get proper duration/timestamps.
- In the spdif-mp2-remux test the demuxer marks the stream as
being MP2; the parser sets it to MP3 and this triggers
the "Codec change in IEC 61937" codepath; this test therefore
returns only two packets with the parser.
- For spdif-mp3-remux some bytes end up in different packets:
Some input packets of this file have an odd length (417B instead
of 418B like all the other packets) and are padded to 418B.
Without a parser, all returned packets from the spdif-demuxer
are 418B. With a parser, the packets that were originally 417B
are 417B again, but the padding byte has not been discarded,
but added to the next packet which is now 419B.
This fixes "Multiple frames in a packet" warning and avoids
an "Invalid data found when processing input" error when decoding.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This duration is equal to the longest duration in all track's tkhd atoms, which
may be comprised of the sum of all edit lists in each track. Empty edit lists
in tracks represent start_time, and the actual media duration is stored in the
mdhd atom.
This change lets the generic demux code derive the longest track duration taken
from mdhd atoms, so the correct duration and start_time combination will be
reported.
Should fix ticket #9775.
Reviewed-by: zhilizhao(赵志立) <quinkblack@foxmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
