Fixes two warnings:
libavformat/rtpdec.c:155:20: warning: return discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
libavformat/rtpdec.c:168:20: warning: return discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
When feeding input RTP packets to the depacketizer via custom IO,
it needs to pick the right stream using the payload type for
RTP packets, and using the SSRC for RTCP packets. If the first
packet is an RTCP packet, we don't (currently) know the SSRC
yet and thus can't pick the right RTP depacketizer to handle it.
By parsing the SSRC attribute in the SDP, we can map initial
RTCP packets to the right stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
If set, and if TCP is available as RTSP RTP transport, then TCP will be
tried first as RTP transport.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
An SDP description normally only contains the target IP address
and port for the packets. This means that we don't really have
any clue where to send the RTCP RR packets - previously they're
sent to the destination IP written in the SDP (at the same port),
which rarely is the actual peer. And if the source for the packets
is on a different port than the destination, it's never correct.
With a new option, we can choose to send the packets to the
address that the latest packet on each socket arrived from.
---
Some may even argue that this should be the default - perhaps,
but I'd rather keep it optional at first. Additionally, I'm not
sure if sending RTCP RR directly back to the source is
desireable for e.g. multicast.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '1f57d60129b0e297cd197c6031c4439b30a6b503':
rtsp: Support RFC4570 (source specific multicast) more properly.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add support for domain names, for multiple source addresses,
for exclusions, and for session level specification of addresses.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '36fb0d02a1faa11eaee51de01fb4061ad6092af9':
rtsp: Support multicast source filters (RFC 4570)
rtpproto: Check the source IP if one single source has been specified
rtpproto: Support IGMPv3 source specific multicast inclusion
Conflicts:
libavformat/rtpproto.c
libavformat/rtsp.c
libavformat/rtsp.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This supports inclusion of one single IP address for now,
at the media level. Specifying the filter at the session level
(instead of at the media level), multiple source addresses,
exclusion, or using FQDNs instead of plain IP addresses is not
supported (yet at least).
Signed-off-by: Martin Storsjö <martin@martin.st>
Passes Source-Specific Multicast parameters read from an sdp file through to the UDP socket code,
allowing source-specific multicast streams to be correctly received. As an integral part of this
change, additional checking (currently only enabled in the case of SSM streams, but probably
useful in similar scenarios) has been added to the RTP protocol handler to distinguish UDP packets
arriving from multiple sources to the same port and process only the expected packets
(those transmitted from the expected UDP source address). This resolves an issue identified
when multiple instances of FFmpeg subscribe to different Source-Specific Multicast streams
but with each sharing the same destination port.
Signed-off-by: Edward Torbett <ed.torbett@simulation-systems.co.uk>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2f3bada63e57345329c4f9b48e9b81b5cfc03d05':
lavf: Add a protocol for SRTP encryption/decryption
rtsp: Support decryption of SRTP signalled via RFC 4568 (SDES)
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This only takes care of decrypting incoming packets; the outgoing
RTCP packets are not encrypted. This is enough for some use cases,
and signalling crypto keys for use with outgoing RTCP packets
doesn't fit as simply into the API. If the SDP demuxer is hooked
up with custom IO, the return packets can be encrypted e.g. via the
SRTP protocol.
If the SRTP keys aren't available within the SDP, the decryption
can be handled externally as well (when using custom IO).
Signed-off-by: Martin Storsjö <martin@martin.st>
This sends NACK for missed packets and PLI (picture loss indication)
if a depacketizer indicates that it needs a new keyframe, according
to RFC 4585.
This is only enabled if the SDP indicated that feedback is supported
(via the AVPF or SAVPF profile names).
The feedback packets are throttled to a certain maximum interval
(currently 250 ms) to make sure the feedback packets don't eat up
too much bandwidth (which might be counterproductive). The RFC
specifies a more elaborate feedback packet scheduling.
The feedback packets are currently sent independently from normal
RTCP RR packets, which is not totally spec compliant, but works
fine in the environments I've tested it in. (RFC 5506 allows this,
but requires a SDP attribute for enabling it.)
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e96406eda4f143f101bd44372f7b2d542183000a':
rtsp: Add support for depacketizing RTP data via custom IO
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
To use this, set sdpflags=custom_io to the sdp demuxer. During
the avformat_open_input call, the SDP is read from the AVFormatContext
AVIOContext (ctx->pb) - after the avformat_open_input call,
during the av_read_frame() calls, the same ctx->pb is used for reading
packets (and sending back RTCP RR packets).
Normally, one would use this with a read-only AVIOContext for the
SDP during the avformat_open_input call, then close that one and
replace it with a read-write one for the packets after the
avformat_open_input call has returned.
This allows using the RTP depacketizers as "pure" demuxers, without
having them tied to the libavformat network IO.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '1cd432e167b1a80853760c89a33606e2b5f229c2':
configure: fix libcdio check
rtsp: Allow setting the reordering buffer size via an AVOption
rtsp: Vertically align a constant definition
rtp: Update the check for distinguishing between RTP and RTCP
aac: fix build with hardcoded tables
fate: dependencies for screen codec tests
riff: Move functions around to be covered by appropriate #ifdefs
Conflicts:
configure
tests/fate/screen.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegvideo: reduce excessive inlining of mpeg_motion()
mpegvideo: convert mpegvideo_common.h to a .c file
build: factor out mpegvideo.o dependencies to CONFIG_MPEGVIDEO
Move MASK_ABS macro to libavcodec/mathops.h
x86: move MANGLE() and related macros to libavutil/x86/asm.h
x86: rename libavutil/x86_cpu.h to libavutil/x86/asm.h
aacdec: Don't fall back to the old output configuration when no old configuration is present.
rtmp: Add message tracking
rtsp: Support mpegts in raw udp packets
rtsp: Support receiving plain data over UDP without any RTP encapsulation
rtpdec: Remove an unused include
rtpenc: Remove an av_abort() that depends on user-supplied data
vsrc_movie: discourage its use with avconv.
avconv: allow no input files.
avconv: prevent invalid reads in transcode_init()
avconv: rename OutputStream.is_past_recording_time to finished.
Conflicts:
configure
doc/filters.texi
ffmpeg.c
ffmpeg.h
libavcodec/Makefile
libavcodec/aacdec.c
libavcodec/mpegvideo.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
configure: Check for the math function rint
TechSmith Screen Codec 2 decoder
rtsp: Add listen mode
rtsp: Make rtsp_open_transport_ctx() non-static
rtsp: Move rtsp_read_close
rtsp: Parse the mode=receive/record parameter in transport lines
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/version.h
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (27 commits)
libxvid: Give more suitable names to libxvid-related files.
libxvid: Separate libxvid encoder from libxvid rate control code.
jpeglsdec: Remove write-only variable in ff_jpegls_decode_lse().
fate: cosmetics: lowercase some comments
fate: Give more consistent names to some RealVideo/RealAudio tests.
lavfi: add avfilter_get_audio_buffer_ref_from_arrays().
lavfi: add extended_data to AVFilterBuffer.
lavc: check that extended_data is properly set in avcodec_encode_audio2().
lavc: pad last audio frame with silence when needed.
samplefmt: add a function for filling a buffer with silence.
samplefmt: add a function for copying audio samples.
lavr: do not try to copy to uninitialized output audio data.
lavr: make avresample_read() with NULL output discard samples.
fate: split idroq audio and video into separate tests
fate: improve dependencies
fate: add convenient shorthands for ea-vp6, libavcodec, libavutil tests
fate: split some combined tests into separate audio and video tests
fate: fix dependencies for probe tests
mips: intreadwrite: fix inline asm for gcc 4.8
mips: intreadwrite: remove unnecessary inline asm
...
Conflicts:
cmdutils.h
configure
doc/APIchanges
doc/filters.texi
ffmpeg.c
ffplay.c
libavcodec/internal.h
libavcodec/jpeglsdec.c
libavcodec/libschroedingerdec.c
libavcodec/libxvid.c
libavcodec/libxvid_rc.c
libavcodec/utils.c
libavcodec/version.h
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/buffersink.h
tests/Makefile
tests/fate/aac.mak
tests/fate/audio.mak
tests/fate/demux.mak
tests/fate/ea.mak
tests/fate/image.mak
tests/fate/libavutil.mak
tests/fate/lossless-audio.mak
tests/fate/lossless-video.mak
tests/fate/microsoft.mak
tests/fate/qt.mak
tests/fate/real.mak
tests/fate/screen.mak
tests/fate/video.mak
tests/fate/voice.mak
tests/fate/vqf.mak
tests/ref/fate/ea-mad
tests/ref/fate/ea-tqi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (25 commits)
riff: fix invalid av_freep() calls on EOF in ff_read_riff_info
pam: Fix a typo that broke writing and reading PAM files.
mxfdec: fix memleak on av_realloc failures
mxfdec: Do not parse slices or DeltaEntryArrays.
mxfdec: hybrid demuxing/seeking solution
mxfdec: Add Avid's essence element key.
mfxdec: Separate mxf_essence_container_uls for audio and video.
mxfdec: Compute packet offsets properly.
mxfdec: Use MaterialPackage - Track - TrackID instead of the system_item hack.
mxfdec: use av_dlog() for 'no corresponding source package found'
mxfdec: Make mxf->partitions sorted by offset.
mxfdec: parse ThisPartition
mxfdec: Speed up metadata and index parsing.
mxfdec: Make sure DataDefinition is consistent between material track and source track.
mxfdec: add EssenceContainer UL found in 0001GL00.MXF.A1.mxf_opatom.mxf
mxfdec: Add hack that adjusts the n_delta calculation when system items are present.
mxfdec: Parse IndexTableSegments and convert them into AVIndexEntry arrays.
mxfdec: Move FooterPartition to MXFContext and make sure it is never zero.
mxfdec: check return value of avio_seek
mxfdec: skip to end of structural sets
...
Conflicts:
configure
libavcodec/pnm.c
libavformat/mxfdec.c
libavformat/riff.c
libavformat/rtsp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>