Performance improvements:
quant_bands:
with: 681 decicycles in quant_bands, 8388453 runs, 155 skips
without: 1190 decicycles in quant_bands, 8388386 runs, 222 skips
Around 42% for the function
Twoloop coder:
abs_pow34:
with/without: 7.82s/8.17s
Around 4% for the entire encoder
Both:
with/without: 7.15s/8.17s
Around 12% for the entire encoder
Fast coder:
abs_pow34:
with/without: 3.40s/3.77s
Around 10% for the entire encoder
Both:
with/without: 3.02s/3.77s
Around 20% faster for the entire encoder
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: James Almer <jamrial@gmail.com>
I/S energy, especially when it comes to phase cancellations,
needs to use signed coefficients as input, yet it was using
abs'd coefficients. That was a slight bug.
This is quite an accurate approximation; testing shows ~ 2ulp error in
the floating point result. Tested with FATE.
Alternatively, if one wants "full accuracy", one can use powf, or sqrt
instead of sqrtf. With powf, one gets 1 ulp error (theoretically should be 0, as
0.75 is exactly representable) on GNU libm, with sqrt, 0 ulp error.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Abstracted into pos_pow34 utility function
Signed-off-by: Claudio Freire <klaussfreire@gmail.com>
Use the ability to invert phase with ms_mask instead of changing
the codebook when possible, to avoid having to switch codebooks
if some bands are INTENSTY_BT and others are INTENSITY_BT2, since
usually a set ms_mask uses less bits that a codebook change. While
it may not always be a win (ie: if it causes an ms_mask bitmap
to be sent when it wouldn't have been otherwise), it's unlikely
since the ms_mask bitmap will almost always be there already for
M/S itself.
The relative error between two encoding strategies is the simple
difference of rate-distortion values, and not the absolute
difference. An absolute measure would allow worsening of the
quantization error as well as improving.
Correct addressing of sf_idx and band_type arrays in I/S code.
Both arrays don't guarantee valid values for subwindows at all
times, depending on which coder is being used, which could result
in reading of garbage values. Instead, only the first subwindow
in the window group has to be used, ie: use w*16+g instead of
(w+w2)*16+g
'erf' is far from the best name for a variable and is not very
descriptive since the actual variable points to the comparitively best
IS phase. Therefore rename it to 'best'.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This patch does 4 things, all of which interact and thus it
woudln't be possible to commit them separately without causing
either quality regressions or assertion failures.
Fate comparison targets don't all reflect improvements in
quality, yet listening tests show substantially improved quality
and stability.
1. Increase SF range utilization.
The spec requires SF delta values to be constrained within the
range -60..60. The previous code was applying that range to
the whole SF array and not only the deltas of consecutive values,
because doing so requires smarter code: zeroing or otherwise
skipping a band may invalidate lots of SF choices.
This patch implements that logic to allow the coders to utilize
the full dynamic range of scalefactors, increasing quality quite
considerably, and fixing delta-SF-related assertion failures,
since now the limitation is enforced rather than asserted.
2. PNS tweaks
The previous modification makes big improvements in twoloop's
efficiency, and every time that happens PNS logic needs to be
tweaked accordingly to avoid it from stepping all over twoloop's
decisions. This patch includes modifications of the sort.
3. Account for lowpass cutoff during PSY analysis
The closer PSY's allocation is to final allocation the better
the quality is, and given these modifications, twoloop is now
very efficient at avoiding holes. Thus, to compute accurate
thresholds, PSY needs to account for the lowpass applied
implicitly during twoloop (by zeroing high bands).
This patch makes twoloop set the cutoff in psymodel's context
the first time it runs, and makes PSY account for it during
threshold computation, making PE and threshold computations
closer to the final allocation and thus achieving better
subjective quality.
4. Tweaks to RC lambda tracking loop in relation to PNS
Without this tweak some corner cases cause quality regressions.
Basically, lambda needs to react faster to overall bitrate
efficiency changes since now PNS can be quite successful in
enforcing maximum bitrates, when PSY allocates too many bits
to the lower bands, suppressing the signals RC logic uses to
lower lambda in those cases and causing aggressive PNS.
This tweak makes PNS much less aggressive, though it can still
use some further tweaks.
Also update MIPS specializations and adjust fuzz
Also in lavc/mips/aacpsy_mips.h: remove trailing whitespace
This finalizes merging of the work in the patches in ticket #2686.
Improvements to twoloop and RC logic are extensive.
The non-exhaustive list of twoloop improvments includes:
- Tweaks to distortion limits on the RD optimization phase of twoloop
- Deeper search in twoloop
- PNS information marking to let twoloop decide when to use it
(turned out having the decision made separately wasn't working)
- Tonal band detection and priorization
- Better band energy conservation rules
- Strict hole avoidance
For rate control:
- Use psymodel's bit allocation to allow proper use of the bit
reservoir. Don't work against the bit reservoir by moving lambda
in the opposite direction when psymodel decides to allocate more/less
bits to a frame.
- Retry the encode if the effective rate lies outside a reasonable
margin of psymodel's allocation or the selected ABR.
- Log average lambda at the end. Useful info for everyone, but especially
for tuning of the various encoder constants that relate to lambda
feedback.
Psy:
- Do not apply lowpass with a FIR filter, instead just let the coder
zero bands above the cutoff. The FIR filter induces group delay,
and while zeroing bands causes ripple, it's lost in the quantization
noise.
- Experimental VBR bit allocation code
- Tweak automatic lowpass filter threshold to maximize audio bandwidth
at all bitrates while still providing acceptable, stable quality.
I/S:
- Phase decision fixes. Unrelated to #2686, but the bugs only surfaced
when the merge was finalized. Measure I/S band energy accounting for
phase, and prevent I/S and M/S from being applied both.
PNS:
- Avoid marking short bands with PNS when they're part of a window
group in which there's a large variation of energy from one window
to the next. PNS can't preserve those and the effect is extremely
noticeable.
M/S:
- Implement BMLD protection similar to the specified in
ISO-IEC/13818:7-2003, Appendix C Section 6.1. Since M/S decision
doesn't conform to section 6.1, a different method had to be
implemented, but should provide equivalent protection.
- Move the decision logic closer to the method specified in
ISO-IEC/13818:7-2003, Appendix C Section 6.1. Specifically,
make sure M/S needs less bits than dual stereo.
- Don't apply M/S in bands that are using I/S
Now, this of course needed adjustments in the compare targets and
fuzz factors of the AAC encoder's fate tests, but if wondering why
the targets go up (more distortion), consider the previous coder
was using too many bits on LF content (far more than required by
psy), and thus those signals will now be more distorted, not less.
The extra distortion isn't audible though, I carried extensive
ABX testing to make sure.
A very similar patch was also extensively tested by Kamendo2 in
the context of #2686.
This was an oversight when the IS system was being first implemented.
The ener01 part was largely a result of trial and error and the fact
that the sum of coef0 and coef1 could result in a zero was
overlooked. Once ener01 turns to zero it's used to divide the left
channel energy which doesn't turn out so well as it fills IS[]
with -nan's and inf's which in turn confused the quantize_band_cost.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
It's better to trust that the coefficients generated will be
closer than the coefficients derived, and the new PNS implementation
makes sure that this happens.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit adds a flag to use the pure coefficients instead
of the processed ones (sce->coeffs). This is needed because
IS will apply the changes to the coefficients immediately
before the adjust_common_prediction function and it doesn't
make sense to measure stereo channel coefficient difference
when one of the channels coefficients are all zero.
Therefore add a flag to use pure coefficients in that case.
TNS is the only thing touching the coefficients before IS
so common window prediction will not take that into account
but the effect of the TNS filter per coefficient can be small
(a few percent) so to some approximation it's fine to just
ignore that.
Also fixed a small error which doesn't alter the results
that much. pow(sqrt(number), 3.0/4.0) == pow(number, 3.0/8.0) !=
pow(number, 3.0/4.0).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit moves the intensity stereo implementation
out from aaccoder and into a separate file. This was
possible using the previous commits.
This commit also drastically improves the IS implementation
by making it phase invariant e.g. it will always choose the
best possible phase regardless of whether M/S coding is on
or most of the coefficients have identical phases.
This also increases the quality and reduces any distortions
introduced by enablind intensity stereo.
Users are encouraged to test it out using the -aac_is 1
parameter as it has always been.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
