Seek beyond the end will now directly return an error instead
of claiming to succeed and then return EOF immediately on next read.
This change is because before 47e015e6f1
mkv seek incorrectly never failed.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
FATE: update reference for seek-alac_mp4
sunrast: Return AVERROR values instead of -1.
sunrast: Add support for gray8 decoding.
swscale: enforce a minimum filtersize.
alacenc: use AVCodec.encode2()
alacenc: cosmetics: indentation
alacenc: consolidate bitstream writing into a single function.
alacenc: only encode frame size in header for a final smaller frame
alacenc: store current frame size in AlacEncodeContext.
alacenc: return AVERROR codes in alac_encode_frame()
alacenc: calculate a new max frame size for the final small frame
alacenc: pretty-printing and other cosmetics
alacenc: fix error handling and potential memleaks in alac_encode_init()
alacenc: do not set coded_frame->key_frame
alacenc: do not set bits_per_coded_sample
alacenc: remove unneeded frame_size check in alac_encode_frame()
tta: error out if samplerate is zero.
ttadec: fix invalid free when an error occurs while decoding 24-bit tta
wavpack: add needed braces for 2 statements inside an if block
Conflicts:
tests/ref/acodec/alac
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is so that TS fragments produced by
http://code.google.com/p/httpsegmenter/
would be compatible with JW Player.
A new member variable prev_payload_key was added to MpegTSWriteStream
to help detect transition from non-key to key frame, so that
PAT/PMT would not be produced for every keyframe in intra-only videos.
Signed-off-by: Pavel Koshevoy <pkoshevoy@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This changes a number of FATE results, since before this commit, the
timestamps in all tests using rawenc were made up by lavf.
In most cases, the previous timestamps were completely bogus.
In some other cases -- raw formats, mostly h264 -- the new timestamps
are bogus as well. The only difference is that timestamps invented by
the muxer are replaced by timestamps invented by the demuxer.
cscd -- avconv sets output codec timebase from r_frame_rate
and r_frame_rate is in this case some guessed number 31.42 (377/12),
which is not accurate enough to represent all timestamps. This results
in some frames having duplicate pts. Therefore, vsync 0 needs to be
changed to vsync 2 and avconv drops two frames. A proper fix in the
future would be to set output timebase to something saner in avconv.
nuv -- previous timestamps for video were wrong AND the cscd
comment applies, one frame is dropped.
vp8-signbias -- the file contains two frames with identical timestamps,
so -vsync 0 needs to be removed/changed to -vsync 2 and avconv drops one
frame.
vc1-ism -- apparrently either the demuxer lies about timestamps or the
file is broken, since dts == pts on all packets, but reordering clearly
takes place.
Current code compares the desired recording time with InputStream.pts,
which has a very unclear meaning. Change the code to use actual
timestamps of the frames passed to the encoder.
In several tests, one less frame is encoded, which is more correct.
In the idroq test one more frame is encoded, which is again more
correct.
Behavior with stream copy should be unchanged.
The output is obviously not supposed to contain video (since only
-acodec copy is specified), but that only happens because of the way -t
handling is implemented currently.
Right now those muxers use the default timebase in all cases(1/90000).
This patch avoid unnecessary rescaling and makes the printed timestamps
more readable.
Also, extend the printed information to include the timebases and packet
pts/duration and align the columns.
Obviously changes the results of all fate tests which use those two
muxers.
* qatar/master:
libx264: fix indentation.
vorbis: fix overflows in floor1[] vector and inverse db table index.
win64: add a XMM clobber test configure option.
movdec: Parse the dvc1 atom
ARM: ac3: fix ac3_bit_alloc_calc_bap_armv6
swscale: K&R formatting cosmetics for Blackfin code
frwu: lowercase the FRWU codec name
movdec: fix dts generation in fragmented files
fate: make acodec-ac3_fixed test output raw AC3
APIchanges: add missing commit hashes
swscale: implement MMX, SSE2 and AVX functions for RGB32 input.
ra144enc: drop pointless "encoder" from .long_name
bethsoftvideo: fix palette reading.
mpc7: use av_fast_padded_malloc()
mpc7: simplify handling of packet sizes that are not a multiple of 4 bytes
doc: decoding Forward Uncompressed is supported
Fix a typo in the x86 asm version of ff_vector_clip_int32()
pcmenc: Do not set avpkt->size.
ff_alloc_packet: modify the size of the packet to match the requested size
Conflicts:
doc/APIchanges
libavcodec/libx264.c
libavcodec/mpc7.c
libavformat/isom.h
libswscale/Makefile
libswscale/bfin/yuv2rgb_bfin.c
tests/ref/fate/bethsoft-vid
tests/ref/seek/ac3_ac3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
frwu: Employ more meaningful return values.
fraps: Use av_fast_padded_malloc() instead of av_realloc()
mjpegdec: use av_fast_padded_malloc()
eatqi: use av_fast_padded_malloc()
asv1: use av_fast_padded_malloc()
avcodec: Add av_fast_padded_malloc().
swscale: enable dithering in MMX functions.
swscale: make rgb24 function macros slightly smaller.
avcodec.h: Remove some disabled cruft.
swscale: remove obsolete comment.
swscale-test: Drop unused argc and argv arguments from main().
zmbv: Employ more meaningful return values.
zmbvenc: Employ more meaningful return values.
vc1: prevent null pointer dereference on broken files
zmbv: check av_realloc() return values and avoid memleaks on ENOMEM
truespeech: align buffer
ac3: Do not read past the end of ff_ac3_band_start_tab.
dv: Fix small stack overread related to CVE-2011-3929 and CVE-2011-3936.
dv: Fix null pointer dereference due to ach=0
dv: check stype
...
Conflicts:
doc/APIchanges
libavcodec/asv1.c
libavcodec/avcodec.h
libavcodec/eatqi.c
libavcodec/fraps.c
libavcodec/frwu.c
libavcodec/zmbv.c
libavformat/dv.c
libswscale/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Return the correct number of consumed bytes and set *data_size = 0.
Returned size is 1 too small, leading to that 1 byte being read as the next
frame, which results in an extra blank frame at the beginning of the stream.
* qatar/master: (29 commits)
fate: add golomb-test
golomb-test: K&R formatting cosmetics
h264: Split h264-test off into a separate file - golomb-test.c.
h264-test: cleanup: drop timer invocations, commented out code and other cruft
h264-test: Remove unused DSP and AVCodec contexts and related init calls.
adpcm: Add missing stdint.h #include to fix standalone header compilation.
lavf: add functions for accessing the fourcc<->CodecID mapping tables.
lavc: set AVCodecContext.codec in avcodec_get_context_defaults3().
lavc: make avcodec_close() work properly on unopened codecs.
lavc: add avcodec_is_open().
lavf: rename AVInputFormat.value to raw_codec_id.
lavf: remove the pointless value field from flv and iv8
lavc/lavf: remove unnecessary symbols from the symbol version script.
lavc: reorder AVCodec fields.
lavf: reorder AVInput/OutputFormat fields.
mp3dec: Fix a heap-buffer-overflow
adpcmenc: remove some unneeded casts
adpcmenc: use int16_t and uint8_t instead of short and unsigned char.
adpcmenc: fix adpcm_ms extradata allocation
adpcmenc: return proper AVERROR codes instead of -1
...
Conflicts:
doc/APIchanges
libavcodec/Makefile
libavcodec/adpcmenc.c
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/libavcodec.v
libavcodec/mpc7.c
libavcodec/mpegaudiodec.c
libavcodec/options.c
libavformat/Makefile
libavformat/avformat.h
libavformat/flvdec.c
libavformat/libavformat.v
Merged-by: Michael Niedermayer <michaelni@gmx.at>
get_ue_golomb_long() is only tested for values up to 2^15 - 2 since
we can not write larger values.
Silence the test on success and return a non-zero value on error.
Use an heap scratch buffer instead of large stack buffer.
Remove unneeded includes.
Codec has only I- and skip-frames, so there is no
need for reget_buffer, change it so it works with
get_buffer.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Causes FFmpeg to pass through the correct pts values,
instead of clobbering all to AV_NOPTS_VALUE (the av_init_packet
default) to then make up new ones based on only fps when muxing.
Included are also the related FATE ref changes, which all
some reasonable on quick investigation.
Also set all H.264 references to us -vsync drop to reduce the
diff for the ref files.
Otherwise almost all H.264 references need to change, mostly due
to now starting with negative pts values.
About 20 additional H.264 conformance tests needed -vsync
drop anyway because they create pts values that are out of
order and thus not possible to mux otherwise.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Previously the decoder would raise an error.
The end result is the same, the time stamps only change
because regression tests create time stamps incorrectly.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
smacker: Sanity check huffman tables found in the headers.
smacker: remove dead store
qdm2: Check data block size for bytes to bits overflow.
mxfdec: Fix files with essence containers larger than 2 GiB.
mxfdec: Employ correct printf conversion specifiers for POSIX int types.
vc1: always read the bfraction element for interlaced fields
fate: add XWD image regression test
lavf: prevent infinite loops while flushing in avformat_find_stream_info
matroskadec: Pad AAC extradata.
ismindex: Fix build on mingw
Conflicts:
libavformat/mxfdec.c
libavformat/utils.c
tests/lavf-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reduces the delay when opening the video with quicktime.
Idea-by: Maksym Veremeyenko <verem@m1stereo.tv>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we
do not use delta entries or slices, only StreamOffsets. OPAtom seeking
basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
Based on several patches by Tomas Härdin <tomas.hardin@codemill.se> and
Reimar Döffinger <Reimar.Doeffinger@gmx.de>.
Changed av_calloc to av_mallocz, added overflow checks.
* qatar/master:
mpeg12: check for available bits to avoid an infinite loop
fate: add some shorthands to run groups of tests
fate: Give some tests more sensible names.
cosmetics: Rename ffsink to avsink.
Conflicts:
avconv.c
cmdutils.c
cmdutils.h
ffmpeg.c
ffplay.c
tests/fate/audio.mak
tests/fate/demux.mak
tests/fate/dpcm.mak
tests/fate/image.mak
tests/fate/lossless-audio.mak
tests/fate/lossless-video.mak
tests/fate/microsoft.mak
tests/fate/pcm.mak
tests/fate/real.mak
tests/fate/screen.mak
tests/fate/video.mak
tests/fate/voice.mak
tests/fate/wma.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
They allow to implement the if/then/else logic, which cannot be
implemented otherwise.
For example the expression:
A*B + not(A)*C
always evaluates to NaN if B is NaN, even in the case where A is 0.
