Add pat and pmt table at start of each segment in single_file mode enhanced
compatibility of hls stream. Because some hls clients separate parsing segment
of hls stream, the absence of pat/pmt will cause parsing to fail.
Reviewed-by: Steven Liu <liuqi05@kuaishou.com>
Signed-off-by: huheng <heng.hu.1989@gmail.com>
This allows for wider compatibility with older devices, such as those
running iOS 3. The only difference between HLS version 2 and version 3 is
that version 3 supports non-integer EXTINF values, and as such, we can
default to version 2 if we're using whole-integer EXTINFs anyways, when
`-hls_flags round_durations` is set.
As this code seems to otherwise consistently use the lowest compatible
version, this seems to fit in properly with existing behavior.
Testing confirms with that this patch, HLS output can work all the way back
to iOS 3.
Reviewed-by: Steven Liu <liuqi05@kuaishou.com>
Signed-off-by: Lucy <lucy@absolucy.moe>
Fix ticket: 9238
In parse_playlist, the discont_program_date_time should be used after
EXT-X-PROGRAM-DATE-TIME tag parsed.
Tested-by: pero
Reviewed-by: Zhao Zhili <zhilizhao@tencent.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Fix ticket: 9010
there have been get http/https shutdown status in ffurl_shutdown.
so unnecessary http/https shutdown status operate.
Tested-by: RytoEX
Tested-by: ushadow
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
This avoids unnecessary rebuilds of most source files if only the
list of enabled components has changed, but not the other properties
of the build, set in config.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
Because the hls_ts_options will be misunderstand by user,
and then user can use hls_segment_options instead of hls_ts_options.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Because the hls_ts_options will be misunderstand by user that only can
be used in mpegts segments option. So add this option for segments.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Otherwise there is no way to detect an error returned by avio_close() because
ff_format_io_close cannot get the return value.
Checking the return value of the close function is important in order to check
if all data was successfully written and the underlying close() operation was
successful.
It can also be useful even for read mode because it can return any pending
AVIOContext error, so the user don't have to manually check AVIOContext->error.
In order to still support if the user overrides io_close, the generic code only
uses io_close2 if io_close is either NULL or the default io_close callback.
Signed-off-by: Marton Balint <cus@passwd.hu>
This is especially important in case avio_write() would be switched
to an unsigned type like size_t, then a potential error from avio_read()
(with negative return value) would no longer be handled gracefully by
avio_write().
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The memset here is both unnecessary (avio_read() ignores the previous
content of the destination buffer) as well as nonsense (for a char
buf[BUFSIZE] sizeof(buf) and sizeof(BUFSIZE) are not the same; the
latter is sizeof(int)).
Fixes Coverity issue #1465863.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
because subtitles streams will be written to webvtt m3u8 list
so the stream index should minus subtitles streams count when subtitle
between audio and video streams.
testcase:
before patch:
ffmpeg -i input -map 0🅰️0 -map 0:s:0 -map 0✌️0 -f hls aaaa.m3u8
will EXC_BAD_ACCESS
after patch:
ffmpeg -i input -map 0🅰️0 -map 0:s:0 -map 0✌️0 -f hls aaaa.m3u8
will ok
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
It only uses an AVIOContext and an AVBPrint.
When doing so, it turned out that several non-users of
ff_read_line_to_bprint_overwrite() and ff_bprint_to_codecpar_extradata()
relied on libavformat/internal.h to include bprint.h or avstring.h
for them. In order to avoid a repeat of this and in order to reduce
unnecessary dependencies, a forward declaration of struct AVBPrint is
used instead of including bprint.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This reverts commit b5ca8f2c66.
This commit will make new problem about tickets: 9193,9205
It flush data into file with init file context together,
and it can get keyframe size, maybe need more method to get keyframe
size.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
This is possible now that the next-API is gone.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
the init.mp4 can be expanded with strftime the same way as
hls_segment_filename.
Signed-off-by: Nikola Pajkovsky <nikola@pajkovsky.cz>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
fix ticket: 8989
This is is due to the following behavior in the current code:
1. The initial_prog_date_time gets set to the current local time
2. The existing playlist (.m3u8) file gets parsed and the segments
present are added to the variant stream
3. The new segment is created and added
4. The existing segments and the new segment are written to the
playlist file. The initial_prog_date_time from point 1 is used
for calculating "#EXT-X-PROGRAM-DATE-TIME" for the segments,
which results in incorrect "#EXT-X-PROGRAM-DATE-TIME" values
for existing segments
The following approach fixes this bug:
1. Add a new variable "discont_program_date_time" of type double
to HLSSegment struct
2. Store the "EXT-X-PROGRAM-DATE-TIME" value from the existing
segments in this variable
3. When writing to playlist file if "discont_program_date_time"
is set, then use that value for "EXT-X-PROGRAM-DATE-TIME" else
use the value present in vs->initial_prog_date_time
Signed-off-by: Vignesh Ravichandran <vignesh.ravichandran02@gmail.com>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
Commit a2b1dd0ce3 added support for
parsing annex B HEVC extradata to extract profile and level information.
Yet it only checks for there to be enough data left for the startcode
and the first byte of the NAL unit header and not for the full NAL unit
header; it simply presumes the second byte of the NAL unit header to be
present and skips it. Then the remaining size of the extradata is calculated
which ends up negative if the second byte of the NAL unit header is not
present. Yet when calling ff_nal_unit_extract_rbsp() it
will be converted to an uint32_t and end up as UINT32_MAX which
will cause mayhem.
This is solved by making sure that there is always enough remaining
extradata that could (pending 0x03 escapes) contain the data that we
are interested in.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
fix ticket: 8636
When write keyframe and the keyframe is the frist packet of the segment,
then compute the size of the keyframe which have been write into segment
first packet. and set the start position of the segment, should not use
avio_tell(vs->out) to get the keyframe position, because it can be set
to 0 if close at above of the workflow, that maybe inaccurate, but the
start_pos can be used here, because start_pos is set after write
the previous packet.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
The target duration will be a negative value when there are
some b frames after prevous frame, the pts after current packet
is large than the pts of current packet, so the target duration
will compute as 0.040000 - 0.080000, then the value of the target
duration will be -0.040000. so hls muxer should check the pts after
current packet minus the pts of current packet, hls muxer can split
the stream as a segment if the target duration is neither negative nor
zero, hls muxer cannot split the stream as a segment if the
target duration is either negative or zero then get the next packet
until the target duration is not negative or zero.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Suggested-by: Zhili Zhao <quinkblack@foxmail.com>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
fix ticket: 8783
Because in single file by encryption mode, it cannot get the last one
block of the file, it need ff_format_io_close for get full file size,
then hlsenc can get the total size of the encryption content,
so write the content into temp file first, and get the temp file content
append the temp file content into append to single file, then hlsenc can
get the correct file/content size and offset.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Also query time only once, not for every variant stream, otherwise variant
streams might get a slightly different initial program date time. And we can
set this unconditionally because HLS_PROGRAM_DATE_TIME flag is checked
elsewhere.
Signed-off-by: Marton Balint <cus@passwd.hu>
Don't need to do double check by the description of the API.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
c801ab43c3 caused a regression: The stream
number is now parsed with strtoll without a fixed basis; as a
consequence, the "010" in a variant stream mapping like "a:010" is now
treated as an octal number (i.e. as eight, not ten). This was not
intended and may break some scripts, so this commit restores the old
behaviour.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the HLS muxer uses av_strtok() to split an input string
controlling parameters of the VariantStreams and then duplicates
parts of this string containing parameters such as the language or the
name of the VariantStream. But these parts are proper zero-terminated
strings of their own that are never modified lateron, so one can simply
use the substring as-is without creating a copy. This commit implements
this.
The same also happened for the string controlling the closed caption
groups.
Furthermore, add const to indicate that the pointers to these substrings
are not used to modify them and also to indicate that these strings are
not allocated on their own.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the HLS muxer duplicated a string for every VariantStream,
although neither the original nor the copies are ever modified. So use
the original directly and stop copying.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The parsing process of the AVOpt-enabled string controlling the mapping
of input streams to variant streams is roughly as follows: Space and tab
separate variant stream group maps while the entries in each variant
stream group map are separated by ','.
The parsing process of each variant stream group proceeded as follows:
At first the number of occurences of "a:", "v:" and "s:" in each variant
stream group is calculated so that one can can allocate an array of
streams with this number of entries. Then the string is split along ','
and each substring is parsed. If such a substring starts with "a:", "s:"
or "v:" it is treated as stream specifier and (if there is a correct
number after ':') a stream of the variant stream is mapped to one of the
actual input streams.
Nothing actually guarantees that the number of streams allocated initially
equals the number of streams that are mapped to an actual input stream.
These numbers can differ if e.g. the name, the sgroup, agroup or ccgroup
of the variant stream contain "a:", "s:" or "v:".
The problem hereby is that the rest of the code presumes these numbers
to be equal and segfaults if it isn't (because the corresponding input
stream is NULL).
This commit fixes this by modifying the initial counting process to only
count occurences of "a:", "s:" or "v:" that are at the beginning or that
immediately follow a ','.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
