It is supposed to be a flag. The only currently defined value is
AVIO_SEEKABLE_NORMAL, but other ones may be added in the future.
However all the current lavf code treats this field as a bool (mainly
for historical reasons).
Change all those cases to properly check for AVIO_SEEKABLE_NORMAL.
This was added before edts support existed, and is no longer
valid.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This breaks files with legitimate single-entry edit lists,
and the hack, introduced in f03a081df0,
has no link to any known sample in its commit message.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
There are samples with invalid stsc that may work fine as is and
do not need extradata change. So ignore any out of range index, and
error out only when explode is set.
Found-by: Matthieu Bouron <matthieu.bouron@stupeflix.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This function needs to return false, or data in the additional tables
will be skipped, and the decoder will not be able to decode frames
associated with them.
Store data from each stsd in a separate extradata buffer, keep track of
the stsc index for read and seek operations, switch buffers when the
index differs. Decoder is notified with an AV_PKT_DATA_NEW_EXTRADATA
packet side data.
Since H264 supports this notification, and can be reset midstream, enable
this feature only for multiple avcC's. All other stsd types (such as
hvc1 and hev1) need decoder-side changes, so they are left disabled for
now.
This is implemented only in non-fragmented MOVs.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Previously, we required the minimum number of bytes required for
the full box. Don't strictly require the astronomical body and additional
notes fields, but do require an altitude field (which currently isn't
parsed). This matches the initial length check at the start of the function
(which doesn't know about the variable length place field).
Signed-off-by: Martin Storsjö <martin@martin.st>
Samples produced by Omneon (Harmonic) store external references with
paths ending with 0s. Such movs cannot be loaded properly since every
0 is converted to '/', to keep the same parsing code for dref type 2
and type 18: this makes the external reference point to a non-existing
direactory, rather than to the actual referenced file.
Add a brief trimming loop that drops all ending 0s before trying to
parse the external reference path.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
Some muxer might or might not fit incomplete mp3 frames in
their packets.
Bug-Id: 899
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Some (de)muxers open additional files beyond the main IO context.
Currently, they call avio_open() directly, which prevents the caller
from using custom IO for such streams.
This commit adds callbacks to AVFormatContext that default to
avio_open2()/avio_close(), but can be overridden by the caller. All
muxers and demuxers using AVIO are switched to using those callbacks
instead of calling avio_open()/avio_close() directly.
(de)muxers that use the URLProtocol layer directly instead of AVIO
remain unconverted for now. This should be fixed in later commits.
This feature is mostly only used by NLE software, and is
both of dubious value being enabled by default, and a
possible security risk.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Some entries might be either empty or contain types we do not parse
(eg. 'url '). In both cases, if an 'alis' is not the first entry,
external references are not loaded, so make sure that the array starts
with an 'alis' dref.
Rather than reading the alternate absolute path version from dref
type 18, make sure that 0s are considered as '/'. These values are
sometimes present in the full path, and are mistakenly interpreted as
line terminators othewise.
With the correct handling of this dref type, parsing type 18 is not
needed any more.
I've got some m4a samples that had jpeg cover art marked as png. Since
these files were supposedly written by iTunes, and other software can
read it (e.g. clementine does), this should be worked around.
Since png has a very simple to detect header, while it's apparently a
real pain to detect jpeg in the general case, try to detect png and
assume jpeg otherwise. Not bothering with bmp, as I have no test case.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Note that convergence_duration had another meaning, one which was in
practice never used. The only real use for it was a 64 bit replacement
for the duration field. It's better just to make duration 64 bits, and
to get rid of it.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The previous restriction was partially designed to fix certain
(broken) samples from bug 215. There should be no restriction on the
number of keyframes per fragment or trun.
The spec suggests that all frames lacking MOV_FRAG_SAMPLE_FLAG_IS_NON_SYNC
are key frames, but we require the flag MOV_FRAG_SAMPLE_FLAG_DEPENDS_YES
to be unset as well. This works for (possibly broken) media that never
sets the NON_SYNC flag and should also be correct for any spec-compliant
file.
For files that never set either of the flags, all samples are marked
as keyframes.
Signed-off-by: Martin Storsjö <martin@martin.st>
14496-3 suggests packing main_data of MP3 that is usually scattered
into multiple frames due to bit reservoir.
However, after packing main_data into a access unit, bitrate index
in the MPEG audio frame header doesn't match with actual frame size.
In order to accept this, this patch removes unnecessary frame size
checking on mp3 decoder.
Also, mov demuxer was changed to use MP3 parser only on special cases
(QT MOV with specific sample description) to avoid re-packetizing.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
If avio_read fails, the buffer can contain uninitialized data.
This fixes 'Conditional jump or move depends on uninitialised value(s)'
valgrind warnings, and addresses a few memleaks.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
In this case the mov demuxer can return a large number of empty packets.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
nlvl_to and nlvl_from can be set to 1 if both alias and target files
are in the same directory, so actually check the first character of the
string. We can do this because MacOS filepaths (alis type 2) are always
converted to UNIX filepaths (alis type 18).
Absolute paths can be stored in alis type 2 and 18 according to my research:
the first is the canonical MacOS filepath, with path level separated by
colons, and the volume name within the filepath, while the second should be the
absolute filesystem path from the mount point.
Although it's not allowed to use only allows 'nclc' in ISOM files, there
are samples that do not always respect this rule. This change prevents
atom overread and a spurious color range initialization.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This will allow to copy the matrix as is and it is just cleaner to keep
the matrix in the same order specified by the mov standard (which is
also explicitly described in the documentation).
In order to preserve compatibility, flip the angle sign in the display API
av_display_rotation_set() and av_display_rotation_get(), and improve the
documentation mentioning the rotation direction.
The current behavior may produce a different sequence of packets
after seeking, compared to demuxing linearly from the beginning.
This is because the MOV demuxer seeks in each stream individually,
based on timestamp, which may set each stream at a slightly different
position than if the file would have been read sequentially.
This makes implementing certain operations, such as segmenting,
quite hard, and slower than need be.
Therefore, add an option which retains the same packet sequence
after seeking, as when a file is demuxed linearly.
Set this field to TRUE if the audio component is to operate on
little-endian data, and FALSE otherwise.
However TRUE and FALSE are not defined. Since this flag is just a boolean,
interpret all values except for 0 as little endian.
Sample-Id: 64bit_FLOAT_Little_Endian.mov
