the init.mp4 can be expanded with strftime the same way as
hls_segment_filename.
Signed-off-by: Nikola Pajkovsky <nikola@pajkovsky.cz>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
fix ticket: 8989
This is is due to the following behavior in the current code:
1. The initial_prog_date_time gets set to the current local time
2. The existing playlist (.m3u8) file gets parsed and the segments
present are added to the variant stream
3. The new segment is created and added
4. The existing segments and the new segment are written to the
playlist file. The initial_prog_date_time from point 1 is used
for calculating "#EXT-X-PROGRAM-DATE-TIME" for the segments,
which results in incorrect "#EXT-X-PROGRAM-DATE-TIME" values
for existing segments
The following approach fixes this bug:
1. Add a new variable "discont_program_date_time" of type double
to HLSSegment struct
2. Store the "EXT-X-PROGRAM-DATE-TIME" value from the existing
segments in this variable
3. When writing to playlist file if "discont_program_date_time"
is set, then use that value for "EXT-X-PROGRAM-DATE-TIME" else
use the value present in vs->initial_prog_date_time
Signed-off-by: Vignesh Ravichandran <vignesh.ravichandran02@gmail.com>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
Commit a2b1dd0ce3 added support for
parsing annex B HEVC extradata to extract profile and level information.
Yet it only checks for there to be enough data left for the startcode
and the first byte of the NAL unit header and not for the full NAL unit
header; it simply presumes the second byte of the NAL unit header to be
present and skips it. Then the remaining size of the extradata is calculated
which ends up negative if the second byte of the NAL unit header is not
present. Yet when calling ff_nal_unit_extract_rbsp() it
will be converted to an uint32_t and end up as UINT32_MAX which
will cause mayhem.
This is solved by making sure that there is always enough remaining
extradata that could (pending 0x03 escapes) contain the data that we
are interested in.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
fix ticket: 8636
When write keyframe and the keyframe is the frist packet of the segment,
then compute the size of the keyframe which have been write into segment
first packet. and set the start position of the segment, should not use
avio_tell(vs->out) to get the keyframe position, because it can be set
to 0 if close at above of the workflow, that maybe inaccurate, but the
start_pos can be used here, because start_pos is set after write
the previous packet.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
The target duration will be a negative value when there are
some b frames after prevous frame, the pts after current packet
is large than the pts of current packet, so the target duration
will compute as 0.040000 - 0.080000, then the value of the target
duration will be -0.040000. so hls muxer should check the pts after
current packet minus the pts of current packet, hls muxer can split
the stream as a segment if the target duration is neither negative nor
zero, hls muxer cannot split the stream as a segment if the
target duration is either negative or zero then get the next packet
until the target duration is not negative or zero.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Suggested-by: Zhili Zhao <quinkblack@foxmail.com>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
fix ticket: 8783
Because in single file by encryption mode, it cannot get the last one
block of the file, it need ff_format_io_close for get full file size,
then hlsenc can get the total size of the encryption content,
so write the content into temp file first, and get the temp file content
append the temp file content into append to single file, then hlsenc can
get the correct file/content size and offset.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Also query time only once, not for every variant stream, otherwise variant
streams might get a slightly different initial program date time. And we can
set this unconditionally because HLS_PROGRAM_DATE_TIME flag is checked
elsewhere.
Signed-off-by: Marton Balint <cus@passwd.hu>
Don't need to do double check by the description of the API.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
c801ab43c3 caused a regression: The stream
number is now parsed with strtoll without a fixed basis; as a
consequence, the "010" in a variant stream mapping like "a:010" is now
treated as an octal number (i.e. as eight, not ten). This was not
intended and may break some scripts, so this commit restores the old
behaviour.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the HLS muxer uses av_strtok() to split an input string
controlling parameters of the VariantStreams and then duplicates
parts of this string containing parameters such as the language or the
name of the VariantStream. But these parts are proper zero-terminated
strings of their own that are never modified lateron, so one can simply
use the substring as-is without creating a copy. This commit implements
this.
The same also happened for the string controlling the closed caption
groups.
Furthermore, add const to indicate that the pointers to these substrings
are not used to modify them and also to indicate that these strings are
not allocated on their own.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the HLS muxer duplicated a string for every VariantStream,
although neither the original nor the copies are ever modified. So use
the original directly and stop copying.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The parsing process of the AVOpt-enabled string controlling the mapping
of input streams to variant streams is roughly as follows: Space and tab
separate variant stream group maps while the entries in each variant
stream group map are separated by ','.
The parsing process of each variant stream group proceeded as follows:
At first the number of occurences of "a:", "v:" and "s:" in each variant
stream group is calculated so that one can can allocate an array of
streams with this number of entries. Then the string is split along ','
and each substring is parsed. If such a substring starts with "a:", "s:"
or "v:" it is treated as stream specifier and (if there is a correct
number after ':') a stream of the variant stream is mapped to one of the
actual input streams.
Nothing actually guarantees that the number of streams allocated initially
equals the number of streams that are mapped to an actual input stream.
These numbers can differ if e.g. the name, the sgroup, agroup or ccgroup
of the variant stream contain "a:", "s:" or "v:".
The problem hereby is that the rest of the code presumes these numbers
to be equal and segfaults if it isn't (because the corresponding input
stream is NULL).
This commit fixes this by modifying the initial counting process to only
count occurences of "a:", "s:" or "v:" that are at the beginning or that
immediately follow a ','.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
For every variantstream vs, vs->packets_written is set to one, only to be
set to zero a few lines below. Given that the relevant structure has
been zeroed during the allocation, this commit removes both assignments.
A redundant initialization for vs->init_range_length has been removed as
well a few lines below. Given that the relevant structure has been
zeroed during the allocation, this commit removes both assignments. A
redundant initialization for vs->init_range_length has been removed as
well.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Mainly includes reindentation and returning directly (i.e. without
a goto fail when possible).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
hls_init() would at first allocate the vtt_basename string, then
allocate the vtt_m3u8_name string followed by several operations that
may fail and then open the subtitles' output context. Yet upon freeing,
these strings were only freed when the subtitles' output context
existed, ensuring that they leak if something goes wrong between their
allocation and the opening of the subtitles' output context. So drop the
check for whether this output context exists.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This fixes memleaks in instances such as:
a) When an allocation fails at one of the two places in hls_init() where
the error is returned immediately without goto fail first.
b) When an error happens when writing the header.
c) When an allocation fails at one of the three places in
hls_write_trailer() where the error is returned immediately without goto
fail first.
d) When one decides not to write the trailer at all (e.g. because of
errors when writing packets).
Furthermore, it removes code duplication and allows to return
immediately, without goto fail first.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Several variables which are only used when the HLS_SINGLE_FILE flag is
unset have been set even when this flag is set. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avformat_alloc_output_context2() already sets the oformat member, so
that there is no reason to overwrite it again with the value it already
has.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The mapping of streams to the various variant streams to be created by
the HLS muxer is roughly as follows: Space and tab separate variant
stream group maps while the entries in each variant stream group map are
separated by ','.
The parsing process of each variant stream group proceeded as follows:
At first the number of occurences of "a:", "v:" and "s:" in each variant
stream group is calculated so that one can can allocate an array of
streams with this number of entries. Then each entry is checked and the
check for stream numbers was deficient: It did check that there is a
number beginning after the ":", but it did not check that the number
extends until the next "," (or until the end).
This means that an invalid variant stream group like v:0_v:1 will not be
rejected; the problem is that the variant stream in this example is
supposed to have two streams associated with it (because it contains two
"v:"), yet only one stream is actually associated with it (because there
is no ',' to start a second stream specifier). This discrepancy led to
segfaults (null pointer dereferencing) in the rest of the code (when the
nonexistent second stream associated to the variant stream was inspected).
Furthermore, this commit also removes an instance of using atoi() whose
behaviour on a range error is undefined.
Fixes ticket #8652.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
fix ticket: 8651
because the init fragment mp4 file name is without base url name,
so just modify it use the full url which splice after init function.
Tested-by: matclayton
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
This patch adds possibility to use 'periodic-rekey' option with
multi-variant streams to hlsenc muxer. All streams variants
use parameters from the same key_info_file.
There are 2 sets of encryption options that kind of overlaps and add
complexity, so I tried to do the thing without changing too much code.
There is a little duplication of the key_file, key_uri, iv_string, etc
in the VariantStream since we copy it from hls to each variant stream,
but generally all the code remains the same to minimise appearing
of unexpected bugs. Refactoring could be done as a separate patch then as needed.
Signed-off-by: Yaroslav Pogrebnyak <yyyaroslav@gmail.com>
segment duration is using vs duration which compute by frame per second,
that can not fix problem of VFR video stream, so compute the duration
when split the segment, set the segment target duration use
current packet pts minus the prev segment end pts..
Reported-by: Zhao Jun <barryjzhao@tencent.com>
Reviewed-by: Zhao Jun <barryjzhao@tencent.com>
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Sequence numbers of segments should be unique, if an encoder is using shorter
than 1 second segments and it is restarted, then future segments will be using
already used sequence numbers if initial sequence number is based on the number
of seconds since epoch and not microseconds.
Signed-off-by: Marton Balint <cus@passwd.hu>
