Matroska EBML IDs can be only four bytes long maximally, so it is
natural to use uint32_t for them. By doing this and rearranging the
elements of the MatroskaLevel1Element structure, one can reduce the size
of said structure.
Notice that this field is not read via the generic reading process for
EBML_UINT, so one is not forced to use an uint64_t for it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This error message is outdated since d31fb1a9.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Pass correct pointer to av_log() and update some error/warning message,
it's will help the debugging
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Additionally:
- Renamed TIFF_WHITE_LEVEL to DNG_WHITE_LEVEL since it is specified
in the DNG spec.
- Added/changed some comments to be more precise in differentiating
between TIFF, TIFF/EP and DNG values.
Related to ticket: https://trac.ffmpeg.org/ticket/4364
Signed-off-by: Nick Renieris <velocityra@gmail.com>
At present, if the outer stream extradata is empty but first packet
has extradata as a side data element, then only the first segment's
muxer instance may be able to extract this side data and use it.
For all other segments, extradata in packet side data could be missing
and generated segments may be invalid or unplayable in some apps
e.g. for an ADTS AAC stream segmented to MP4, the adtstoasc BSF will
add extradata to the first packet. The MOV muxer for the first segment
will add this to codecpar for the inner stream and write
Decoder Specific Information within the esds box. For other segments,
their esds' will not have this decSpecificInfo and they can't be opened
in Quicktime player or by services like nginx-vod-module.
This reverts commit dd06f022b0.
Fixes ticket #7871 and reopens ticket #7816.
The introduced regression caused URL's with @ in them to be parsed incorrectly
which is a bigger issue then not being able to specify the slash character as a
password.
I think there are better ways to fix the original issue, like being able to
specify HTTP username and password as a protocol option, or adding a protocol
option to percent-decode the URL first.
Signed-off-by: Marton Balint <cus@passwd.hu>
The return code is 64bit, so this is more correct, especially in case it
actually would be a file of such large size
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
setting return status following goto will never be executed, so
adjust the location in the code.
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
AVCodecContext->bit_rate is int64_t since 7404f3bd
Unbreaks non-interleaved detection of v210 4k avi files, broken since 0eec40b7.
Reported-by: Xavier Càmara, Centre de Conservació i Restauració, Filmoteca de Catalunya
After the last few commits, the functions for writing master elements
with CRC-32 elements didn't really make use of the ebml_master
structure any more, so remove these parameters from the functions.
The only things that still need to be kept are the positions of the
level 1 elements that are written preliminarily and updated later.
These positions are stored in the MatroskaMuxContext and
replace the corresponding ebml_master structures.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, a block's relative offset has been reported as the offset
in the log messages output when writing blocks; given that it is
impossible to know the real offset from the beginning of the file at
this point due to the fact that it is not yet known how many bytes will
be used for the containing cluster's length field both the relative
offset in the cluster as well as the offset of the containing cluster
will be reported from now on.
Furthermore, the TrackNumber of the written block has been added to the
log output.
Also, the log message for writing vtt blocks has been brought in line
with the message for normal blocks.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, the length field of most level 1 elements has been written
using eight bytes, although it is known in advance how much space the
content of said elements will take up so that it would be possible to
determine the minimal amount of bytes for the length field. This
commit changes this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes intendation, whitespace, a typo and renames a variable
(dyn_bc->cluster_bc) to make its meaning clearer and to bring
it more in line with the naming of similar variables.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Given that in both the seekable as well as the non-seekable mode dynamic
buffers are used to write level 1 elements and that now no seeks are
used in the seekable case any more, the two modes can be combined; as a
consequence, the non-seekable mode automatically inherits the ability to
write CRC-32 elements.
There are no differences in case the output is seekable; when it is not
and writing CRC-32 elements is disabled, there can still be minor
differences because before this commit, the EBML ID and length field
were counted towards the cluster size limit; now they no longer are.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, the writing process for level 1 elements (those elements
for which CRC-32 elements are written by default) was this in case the
output was seekable: Write the EBML ID, write an "unkown length" EBML
number of the desired length, then write the element into a dynamic
buffer, then write the dynamic buffer (after possible calculation and
writing of the CRC-element), then seek back to the size element and
overwrite the unknown-size element with the real size. The seeking and
overwriting part has been eliminated by not writing the size initially.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
A Matroska EBML ID can only be maximally four bytes long, so make the
variables denoting EBML IDs uint32_t instead of unsigned int to
better reflect this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
All places where end_ebml_master_crc32_preliminary are used already
check for whether the output is seekable, so the check in the function
is redundant.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Since 4e3bdf729a there is no reason any
more to treat the seekable and non-seekable cases separate with regards
to the log message for a new cluster. This effectively reverts
d41aeea8a6.
Also improved the log message: "pts 80dts 0" -> "pts 80, dts 0".
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, the check for whether to write CRC32 elements was always
mkv->write_crc && mkv->mode != MODE_WEBM. This is equivalent to simply
set write_crc to zero in WebM-mode. And this is what this commit does.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until e7ddafd515 the Matroska muxer
wrote a secondary seek head referencing all the clusters. When this
was changed, a (now completely wrong) comment remained and the unique
remaining seek head was still called main_seekhead. This has been
changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now the EBML Header length field has been written with eight
bytes, although the EBML Header is always so small that only one byte
is needed for it. This patch saves seven bytes for every Matroska/Webm
file.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The upper bounds currently used for determining the size of a CuePoint's
length field can be improved somewhat; as a result, a CuePoint
containing three CueTrackPositions will now only need a size field
with one byte length.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The earlier code included the size of the BlockGroup's length field and
the EBML ID in the calculation of the size for the payload and ignored
the size of the duration's length field. This meant that Blockgroups
corresponding to packets with size 2^(7n) - 17 - n - i, i = 0,..., n - 1,
n = 1,..., 8 (i.e. 110, 16364, 16365, 2097130..2097132, ...) were written
with length fields that are unnecessarily long.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
At this point, ts already includes the ts_offset so that the relative
time written with the cluster is already given by ts - mkv->cluster_pts.
It is this number that needs to fit into an int16_t.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
10 bytes (id3v2 header amount of bytes) were being read before any checks
were made on the bitstream. The result was that we were overreading into
the next frame if the current one was 8 or 9 bytes long.
Fixes tickets #7271 and #7869.
Signed-off-by: James Almer <jamrial@gmail.com>
This commit was merged in a couple years ago as a no-op because we
had already switched from GetProcAddress to dlsym some time before
that. However, not applying the actual cast causes warnings about
FARPROC and when attempting to build FFmpeg in MSVC with AviSynth-GCC
32-bit compatibility, those FARPROC warnings turn into FARPROC errors.
These pix_fmts have been added to FFmpeg in the 31 months since
commit 92916e8542 added support for
the larger number of pix_fmts that AviSynth+ can use. They were
present in AviSynth+ even then, just not in libavutil.
