A common pattern e.g. in libavcodec is replacing/updating buffer
references: unref old one, ref new one. This function allows simplifying
such code and avoiding unnecessary refs+unrefs if the references are
already equivalent.
As it was brought up that the current documentation leaves things
as specific to YCbCr only, ICtCp and RGB are now mentioned.
Additionally, the specifications on which these definitions of
narrow and full range are defined are mentioned.
This way, the documentation of AVColorRange should now match how
most people seem to read interpret it at this point, and thus
flagging RGB AVFrames as full range is valid not only according to
common sense, but also the enum definition.
Fixes: signed integer overflow: 0 - -2147483648 cannot be represented in type 'int'
Fixes: 23646/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_AAC_FIXED_fuzzer-5480991098667008
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
SMPTE 12M timecode can only count frames up to 39, because the tens-of-frames
value is stored in 2 bit. In order to resolve this 50/60 fps SMPTE timecode is
using the field bit (which is the same bit as the phase correction bit) to
signal the least significant bit of a 50/60 fps timecode. See SMPTE ST
12-1:2014 section 12.1.
Therefore we slightly change the format of the return value of
av_timecode_get_smpte_from_framenum and AV_FRAME_DATA_S12M_TIMECODE and start
using the previously unused Phase Correction bit as Field bit. (As the SMPTE
standard suggests)
We add 50/60 fps support to av_timecode_get_smpte_from_framenum by calling the
recently added av_timecode_get_smpte function in it which already handles this
properly.
This change affects the decklink indev and the DV and MXF muxers. MXF has no
fate test for 50/60fps content, DV does, therefore the changes.
MediaInfo (a recent version) confirms that half-frame timecode must be inserted
to DV. MXFInspect confirms valid timecode insertion to the System Item of MXF
files. For MXF, also see EBU R122.
Note that for DV the field flag is not used because in the HDV specs (SMPTE
370M) it is still defined as biphase mark polarity correction flag. So it
should not matter that the DV muxer overrides the field bit.
Signed-off-by: Marton Balint <cus@passwd.hu>
The V4L2 driver does not actually have an associated DRM device at all, so
users work around the requirement by giving libva an unrelated display-only
device instead (which is fine, because it doesn't actually do anything with
that device). This was broken by bc9b6358fb
forcing a render node, because the display-only device did not have an
associated render node to use. Fix that by just passing through the
original non-render DRM fd if we can't find a render node.
Reported-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Tested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Requires some extraneous top side and bottom front channels to be
defined.
According to STD-B59v2, the defined channel layout is:
- FL
- FR
- FC
- LFE1
- BL
- BR
- FLc
- FRc
- BC
- LFE2
- SiL
- SiR
- TpFL
- TpFR
- TpFC
- TpC
- TpBL
- TpBR
- TpSiL
- TpSiR
- TpBC
- BtFC
- BtFL
- BtFR
The process space is guaranteed to be aligned to the page size, hence we're
never going to map outside of our address space.
There are more optimizations to do with respect to chroma plane alignment and
buffer offsets, but that can be done later.
GCC support these two synthesized instruction, but clang does not yet.
Use machine instruction instead to adapt clang compiler.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
hwcontext_vaapi maps different VA fourcc to the same pix_fmt for U/V
plane swap cases, however duplicate formats are not expected in sw_format
list when merging formats.
For example:
ffmpeg -loglevel debug -init_hw_device vaapi -filter_hw_device vaapi0 \
-f lavfi -i smptebars -vf \
"hwupload=derive_device=vaapi,scale_vaapi,hwdownload,format=yuv420p" \
-vframes 1 -f null -
Without this fix, an auto scaler is required for the above command
Duplicate formats in ff_merge_formats detected
[auto_scaler_0 @ 0x560df58f4550] Setting 'flags' to value 'bicubic'
[auto_scaler_0 @ 0x560df58f4550] w:iw h:ih flags:'bicubic' interl:0
[Parsed_hwupload_0 @ 0x560df58f0ec0] auto-inserting filter
'auto_scaler_0' between the filter 'graph 0 input from stream 0:0' and
the filter 'Parsed_hwupload_0'
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The size for a previous plane doesn't signal the presence of another after it.
If the plane is present, av_image_fill_plane_sizes() will have returned a size
for it.
Fixes a regression since 3a8e927176.
Reported-by: Imad R. Faiad <irfaiad@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Add MMI & MSA runtime detection for MIPS.
Basically there are two code pathes. For systems that
natively support CPUCFG instruction or kernel emulated
that instruction, we'll sense this feature from HWCAP and
report the flags according to values grab from CPUCFG. For
systems that have no CPUCFG (or not export it in HWCAP),
we'll parse /proc/cpuinfo instead.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
That helper grab from kernel code can allow us to inline
newer instructions (not implemented by the assembler) in
a elegant manner.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This uses av_image_fill_plane_sizes instead of av_image_fill_pointers
when we are getting plane sizes to avoid UB from adding offsets to NULL.
Signed-off-by: Brian Kim <bkkim@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This utility helps avoid undefined behavior when doing things like
checking how much memory we need to allocate for an image before we have
allocated a buffer.
Signed-off-by: Brian Kim <bkkim@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The number of declared vdpau formats can vary depending on which
version of libvdpau we build against, so the number of pix fmts
can vary too. Let's make sure we keep those numbers in sync.
Some new warnings regarding use of empty macro parameters has
been added, so adjust some x86inc code to silence those.
Fixes part of ticket #8771
Signed-off-by: James Almer <jamrial@gmail.com>
Added VDPAU to list of supported formats for HEVC10 and 12 bit formats
also added 42010 bit to surface_parameters and new VDP chroma formats to
VDPAUPixFmtMaps
Add HEVC 420 10/12 Bit and 444 10/12 Bit support for VDPAU
YUV444P10 is defined as the 444 surface with 10bit valid data in LSBs
but H/w returns Data in MSBs Hence if we map output as YUV444p16 it
is filtering out the LSB to convert to p10 format.
Signed-off-by: Philip Langdale <philipl@overt.org>
Fixes: signed integer overflow: 2147483610 + 52 cannot be represented in type 'int'
Fixes: 23260/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_PBM_fuzzer-5187871274434560
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: left shift of 1913647649 by 1 places cannot be represented in type 'int'
Fixes: 23572/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WMALOSSLESS_fuzzer-5082619795734528
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
These functions have a terrible design, let us fix them before extending
them.
First design mistake: no error code. A helper function for testing
memory allocation failure where AVERROR(ENOMEM) does not appear is
absurd.
Second design mistake: printing a message. Return the error code, let
the caller print the error message.
Third design mistake: hard-coded use of goto.
http://ffmpeg.org/pipermail/ffmpeg-devel/2020-May/262544.html
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Use opaque iteration state instead of the previous child class. This
mirrors similar changes done in lavf/lavc.
Deprecate the av_opt_child_class_next() API.
make checkheaders will get error as follow:
CC libavutil/hwcontext_vulkan.h.o
In file included from libavutil/hwcontext_vulkan.h.c:1:
./libavutil/hwcontext_vulkan.h:130:23: error: ‘AV_NUM_DATA_POINTERS’ undeclared here (not in a function)
130 | void *alloc_pnext[AV_NUM_DATA_POINTERS];
| ^~~~~~~~~~~~~~~~~~~~
./libavutil/hwcontext_vulkan.h:199:43: warning: ‘enum AVPixelFormat’ declared inside parameter list will not be visible outside of this definition or declaration
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
We want to copy the lowest amount of bytes per line, but while the buffer
stride is sanitized, the src/dst stride can be negative, and negative numbers
of bytes do not make a lot of sense.
The size of a single allocation performed by av_malloc() or av_realloc()
is supposed to be bounded by max_alloc_size, which defaults to INT_MAX
and can be set by the user; yet currently this is not completely
honoured: The actual value used is max_alloc_size - 32. How this came
to be can only be understood historically:
a) 0ecca7a49f disallowed allocations
> INT_MAX. At that time the size parameter of av_malloc() was an
unsigned and the commentary added ("lets disallow possible ambiguous
cases") indicates that this was done as a precaution against calling the
functions with negative int values. Genuinely limiting the size of
allocations to INT_MAX doesn't seem to have been the intention given
that at this time the memalign hack introduced in commit
da9b170c6f (which when enabled increased
the size of allocations slightly so that one can return a correctly
aligned pointer that actually does not point to the beginning of the
allocated buffer) was already present.
b) Said memalign hack allocated 17 bytes more than actually desired, yet
allocating 16 bytes more is actually enough and so this was changed in
a9493601638b048c44751956d2360f215918800c; this commit also replaced
INT_MAX by INT_MAX - 16 (and made the limit therefore a limit on the size
of the allocated buffer), but kept the comment, although there is nothing
ambiguous about allocating (INT_MAX - 16)..INT_MAX.
c) 13dfce3d44 then increased 16 to 32 for
AVX, 6b4c0be558 replaced INT_MAX by
MAX_MALLOC_SIZE (which was of course defined to be INT_MAX) and
5a8e994287 added max_alloc_size and made
it user-selectable.
d) 4fb311c804 then dropped the memalign
hack, yet it kept the -32 (probably because the comment about ambiguous
cases was still present?), although it is no longer needed at all after
this commit. Therefore this commit removes it and uses max_alloc_size
directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This was never actually used, likely due to confusion, as the device context
also had one used for uploads and downloads.
Also, since we're only using it for very quick image barriers (which are
practically free on all hardware), use the compute queue instead of the
transfer queue.
This commit makes full use of the enabled queues to provide asynchronous
uploads of images (downloads remain synchronous).
For a pure uploading use cases, the performance gains can be significant.
With this, the puzzle of making libplacebo, ffmpeg and any other Vulkan
API users interoperable is complete.
Users of both libraries can initialize one another's contexts without having
to create a new one.
This allows for users who derive devices to set options for the
new device context they derive.
The main use case of this is to allow users to enable extensions
(such as surface drawing extensions) in Vulkan while deriving from
the device their frames are on. That way, users don't need to write
any initialization code themselves, since the Vulkan spec invalidates
mixing instances, physical devices and active devices.
Apart from Vulkan, other hwcontexts ignore the opts argument since they
don't support options at all (or in VAAPI and OpenCL's case, options are
currently only used for device selection, which device_derive overrides).
This will be used for AVCodecContext->profile. By specifying constants in the
encoders we won't have to use the common AVCodecContext options table and
different encoders can use the same profile name even with different values.
Signed-off-by: Marton Balint <cus@passwd.hu>
Enables HEVC Range Extension decoding support (Linux) for 4:2:2 8/10 bit
on ICL+ (gen11 +) platform.
Restricted to linux only for now.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Many places are using their own custom code for handling overflow
around timestamps or other int64_t values. There are enough of these
now that having some common saturated math functions seems sound.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
On windows and darwin (and modern android), the x18 register is reserved
and shouldn't be modified by user code, while it is freely available on
linux. Strictly avoid it, to keep the assembly code portable.
This would have helped catch the issue fixed in 872790b1f9
immediately.
Signed-off-by: Martin Storsjö <martin@martin.st>
Only warn instead. API users can find out which extensions were unavailable
by using the enabled_inst_extensions and enabled_dev_extensions fields.
This eliminates having to trial-and-error to find which extensions were missing.
Due to our AVHWDevice infrastructure, where API users are offered a way
to derive contexts rather than always create new one, our filterchains,
being supported by a single hardware device context, can grow to considerable
size.
Hence, in such situations, using the maximum amount of queues the device offers
can be benefitial to eliminating bottlenecks where queue submissions on the
same family have to wait for the previous one to finish.
This is intended to replace the deprecated the AV_FRAME_DATA_QP_TABLE*
API and extend it to a wider range of codecs.
In the future, it may also be extended to support other encoding
parameters such as motion vectors.
Additional changes by Anton Khirnov <anton@khirnov.net> with suggestions
by Lynne <dev@lynne.ee>.
Signed-off-by: Juan De León <juandl@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This reverts commit 97b526c192.
It broke the API, and assumed no other APIs used multiple semaphores.
This also disallowed certain optimizations to happen.
Dealing with APIs that give or expect single semaphores is easier when
we use per-image semaphores.
The specs note that images should be in the GENERAL layout when exporting
for maximum compatibility.
CUDA exported images are handled differently, and the queue is the same,
so we don't need to do that there.
As it turns out, we were already assuming and treating all images as if they had
concurrent access mode. This just changes the flag to CONCURRENT, which has less
restrictions than EXCLUSIVE, and fixed validation messages on machines with
multiple queues.
The validation layer didn't pick this up because the machine I was testing on
had only a single queue.
This solves a huge oversight - it lets users reliably use their own
AVVulkanDeviceContext. Otherwise, the extensions supplied and enabled
are not discoverable by anything outside of hwcontext_vulkan.
Also clarifies that any user-supplied VkInstance must be at least 1.1.
Also documents all options supported by the hwdevice.
This lets users enable all extensions they need without writing their own
instance initialization code.
Fixes problems when non-rational options were set using rational expressions,
causing rounding errors and the option range limits not to be enforced
properly.
ffmpeg -f lavfi -i "sine=r=96000/2"
This caused an assertion failure with assert level 2.
Signed-off-by: Marton Balint <cus@passwd.hu>
bump minor version for DOVI sidedata, because added the dovi_meta.h
as lavu API part. Also update APIchanges.
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
We derive the destination buffer stride from the input stride,
which meant if the image was flipped with a negative stride,
we'd be FFALIGNING a negative number which ends up being huge,
thus making the Vulkan buffer allocation fail and the whole
image transfer fail.
Only found out about this as OpenGL compositors can copy an entire
image with a single call if its flipped, rather than iterate over
each line.
Do not limit the array allocation functions and av_calloc() to allocations
of INT_MAX, instead depend on max_alloc_size like av_malloc().
Allows a workaround for ticket #7140.
The idea was to allow separate planes to be filtered independently, however,
in hindsight, literaly nothing uses separate per-plane semaphores and it
would only work when each plane is backed by separate device memory.
