Apparently bmdFormatUnspecified needs SDK 11.0. It is just a fancy way of
checking for zero, so let's do that instead.
Fixes build issue since f1b908d20a.
Signed-off-by: Marton Balint <cus@passwd.hu>
Since bae8844e35, the AVPacket that is
intended to be used to return the demuxed packet is automatically
unreferenced when the demuxer returns an error. This makes an
av_packet_unref() in the lavfi demuxer redundant.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
av_new_packet() already sets the size. And if the packet is not
allocated by av_new_packet() (which seems to be impossible atm), both
pkt->size as well as size are 0, so setting it again is unnecessary in
this scenario, too.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes#7312, segmentation fault on close of X11 server
xcb_query_pointer_reply() and xcb_get_geometry_reply() can return NULL
if e.g. the X server closes or the connection is lost. This needs to
be checked in order to cleanly exit, because the returned pointers are
dereferenced later.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
X2RGB10 tested on both Intel Gen9 and AMD Polaris 11. NV12 tested on
Intel Gen9 only - since it has multiple planes, this requires GetFB2.
Also add some comments to split the list up a bit.
The most useful feature here is the ability to automatically extract the
framebuffer format and modifiers. It also makes support for multi-plane
framebuffers possible, though none are added to the format table in this
patch.
This requires libdrm 2.4.101 (from April 2020) to build, so it includes a
configure check to allow compatibility with existing distributions. Even
with libdrm support, it still won't do anything at runtime if you are
running Linux < 5.7 (before June 2020).
Apparently the changes from 3c9185bf3a
aren't enough; even with that in place, I got errors like this
when trying to build for iOS:
src/libavdevice/avfoundation.m:135:5: error:
'AVCaptureDeviceTransportControlsPlaybackMode' is unavailable: not
available on iOS
AVCaptureDeviceTransportControlsPlaybackMode observed_mode;
^
The capture_started variable was never set, it is simpler to call the stop
functions unconditionally if the interface is available.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also by wrapping the SHM buffer in an AVBufferRef we eliminate yet another
possible memcpy improving performance.
Signed-off-by: Marton Balint <cus@passwd.hu>
Before this commit an av_assert0 would fail if a v4l2 device did not
support a target format.
For example,
./ffmpeg -f v4l2 -codec:v h264 -i /dev/video0 -f mpegts -
would signal an abort if /dev/video0 did not support h264.
The new behaviour is to return an AVERROR(EINVAL) error code. An
av_assert0 has been added to verify this return.
Fixes#6629
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Behave like we do for V4L2_BUF_FLAG_ERROR, implemented in commit 28f20d2ff4 .
For some devices (probably also related to the V4L driver implementation)
it happens that when invoking the ioctl DQBUF, the returned buffer is not
of the expected size. Here are two examples for such occurrences:
[video4linux2,v4l2 @ 0x258b440] Dequeued v4l2 buffer contains 609596 bytes, but 614400 were expected. Flags: 0x00000001.
/dev/video1: Invalid data found when processing input
[video4linux2,v4l2 @ 0x225f440] Dequeued v4l2 buffer contains 609508 bytes, but 614400 were expected. Flags: 0x00000001.
/dev/video1: Invalid data found when processing input
For the ffmpeg CLI tool this means it will stop capturing and exit.
The described behaviour was observed at least with one OmniVision USB
web cam and with some stk1160 devices.
If you search the web for the error message, you will find quite a few
instances of this problem. Some of them experienced on other devices.
Probably fixes ticket #4795
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
missed the category AV_CLASS_CATEGORY_DEVICE_VIDEO_INPUT lead to
ffmpeg -devices doesn't show gdigrab as a input device
FIx#7848
Found-by: dangibson
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Apparently in the new SDK one cannot query if VANC output is supported, so we
will fall back to non-VANC output if enabling the video output with VANC fails.
Fixes ticket #7867.
Signed-off-by: Marton Balint <cus@passwd.hu>
There is a calculation error in xcbgrab_reposition() that breaks
vertical repositioning on follow_mouse. It made the bottom
reposition occur when moving the mouse lower than N pixels after
the capture bottom edge, instead of before.
This commit fixes the calculation to match the documentation.
follow_mouse: centered or number of pixels. The documentation says:
When it is specified with "centered", the grabbing region follows
the mouse pointer and keeps the pointer at the center of region;
otherwise, the region follows only when the mouse pointer reaches
within PIXELS (greater than zero) to the edge of region.
In Windows if using scaling other than 100% then the grabbed window was not captured fully (cropped)
Signed-off-by: Dilshod Mukhtarov <dilshodm@gmail.com>
Allows arrangement of multiple windows such as:
ffmpeg -re -f lavfi -i mandelbrot -f sdl -window_x 1 -window_y 1 mandelbrot -vf waveform,format=yuv420p -f sdl -window_x 641 -window_y 1 waveform -vf vectorscope,format=yuv420p -f sdl -window_x 1 -window_y 481 vectorscop
Some changes by Marton Balint:
- allow negative position (partially or fully out-of-screen positions seem to
be sanitized automatically by SDL (or my WM?), so no special handling is
needed)
- only show window after the position is set
- do not use resizable and borderless flags at the same time, that caused
issues in ffplay
- add docs
Signed-off-by: Marton Balint <cus@passwd.hu>
Make the function static, or else Clang complains with:
error: no previous prototype for function 'decklink_get_attr_string' [-Werror,-Wmissing-prototypes]
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This option is useful for maintaining input synchronization across N
different hardware devices deployed for 'N-way' redundancy.
The system time of different hardware devices should be synchronized
with protocols such as NTP or PTP, before using this option.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also bump the API version requirement to 10.9.5, because on olders versions
there were some reports of crashes using the undocumented, yet available
BMDDeckLinkDeviceHandle.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes ticket #5654.
The linesize can be greater than the minimum required. This copies the
frame taking linesize into account.
Signed-off-by: Rick Kern <kernrj@gmail.com>
Hook in libklvanc and use it for output of EIA-708 captions over
SDI. The bulk of this patch is just general support for ancillary
data for the Decklink SDI module - the real work for construction
of the EIA-708 CDP and VANC line construction is done by libklvanc.
Libklvanc can be found at: https://github.com/stoth68000/libklvanc
Updated to reflect feedback from Marton Balint <cus@passwd.hu>,
Carl Eugen Hoyos <ceffmpeg@gmail.com>, Aaron Levinson
<alevinsn_dev@levland.net>, and Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
If the user provides a valid timecode_format look for timecode of that
format in the capture and if found store it on the video avstream's
metadata.
Slightly modified by Marton Balint to capture per-frame timecode as well.
Signed-off-by: Marton Balint <cus@passwd.hu>
The default memory allocator is limited in the max number of frames available,
and therefore caused frame drops if the frames were not freed fast enough.
Signed-off-by: Marton Balint <cus@passwd.hu>
