* commit '12004a9a7f20e44f4da2ee6c372d5e1794c8d6c5':
audiodsp/x86: yasmify vector_clipf_sse
audiodsp: reorder arguments for vector_clipf
Merged the version from Libav after a discussion with James Almer on
IRC:
19:22 <ubitux> jamrial: opinion on 12004a9a7f20e44f4da2ee6c372d5e1794c8d6c5?
19:23 <ubitux> it was apparently yasmified differently
19:23 <ubitux> (it depends on the previous commit arg shuffle)
19:24 <ubitux> i don't see the magic movsxdifnidn in your port btw
19:24 <ubitux> it's a port from 1d36defe94
19:25 <jamrial> seems better thanks to said arg shuffle
19:25 <jamrial> the loop is the same, but init is simpler
19:25 <jamrial> probably worth merging
19:25 <ubitux> OK
19:25 <ubitux> thanks
19:26 <jamrial> curious they didn't make len ptrdiff_t after the previous bunch of commits, heh
19:26 <ubitux> yeah indeed
Both commits are merged at the same time to prevent a conflict with our
existing yasmified ff_vector_clipf_sse.
Merged-by: Clément Bœsch <u@pkh.me>
* commit '3aa9d37d03da3c9b482d19b3988659287815280e':
build: Fix directory dependencies of tests/pixfmts.mak target
This might not be necessary given our mkdirs in the configure, but it
probably doesn't hurt.
Merged-by: Clément Bœsch <u@pkh.me>
This field is of little value, and interferes with testing side data,
since sizes can be different on multiple architectures.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Allows to get a more realistic total bitrate (and estimated file size)
in avi_write_header. Previously a static default value of 200k was
assumed.
Adds an internal helper function for bitrate guessing.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Preparation for potentially disabling merged side data by default in the
libs. Do this in particular because it affects fate tests.
The changed tests either reflect added packet side data, or the changed
packet size due to merged side data removal reducing the packet size.
so tsf option in aresample will have effect
previously tsf/internal_sample_format had no effect
fate is updated
s32p previously used fltp internally
dblp previously used fltp/dblp internally
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
except filter_length == 1
odd filter_length gives worse frequency response,
even when compared with shorter filter_length
also makes build_filter simpler
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
The Chen-Shapiro(CS) test was used to test normality for
Lagged Fibonacci PRNG.
Normality Hypothesis Test:
The null hypothesis formally tests if the population
the sample represents is normally-distributed. For
CS, when the normality hypothesis is True, the
distribution of QH will have a mean close to 1.
Information on CS can be found here:
http://www.stata-journal.com/sjpdf.html?articlenum=st0264http://www.originlab.com/doc/Origin-Help/NormalityTest-Algorithm
Signed-off-by: Thomas Turner <thomastdt@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This makes sure the actual stream parameters are used, which is
important mainly for hardware decoding+filtering cases, which would
previously require various weird workarounds to handle the fact that a
fake software graph has to be constructed, but never used.
This should also improve behaviour in rare cases where
avformat_find_stream_info() does not provide accurate information.
This merges Libav commit a3a0230. It was previously skipped.
The code in flush_encoders() which sets up a "fake" format wasn't in
Libav. I'm not sure if it's a good idea, but it tends to give
behavior closer to the old one in certain corner cases.
The vp8-size-change gives different result, because now the size of
the first frame is used. libavformat reported the size of the largest
frame for some reason.
The exr tests now use the sample aspect ratio of the first frame. For
some reason libavformat determines 0/1 as aspect ratio, while the
decoder returns the correct one.
The ffm and mxf tests change the field_order values. I'm assuming
another libavformat/decoding mismatch.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This will be useful in the following commit, after which the muxer
timebase is not always available when encoding.
This merges Libav commit 3e265ca. It was previously skipped.
There are some changes with how/when the mux_timebase field is set,
because the Libav approach often causes a too imprecise time base
to be set. This is hard, because the muxer's write_header function
can readjust the timebase, at which point we might already have
encoded packets buffered. (It might be better to buffer them after
the encoder, instead of after all the timestamp handling logic
before muxing.)
The two FATE tests change because the output time base is raised
for subtitles. (Needed to avoid certain rounding issues in other
cases.)
Includes a minor merge fix by Mark Thompson, and
avconv: Move rescale to stream timebase before monotonisation
also by Mark Thompson <sw@jkqxz.net>.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This should fix the fate failure due to a truncated last frame.
Alternatively the frame could be dropped.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 664/clusterfuzz-testcase-4917047475568640
The change to fate is due to a truncated last frames which is now detected as damaged.
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
According to the spec[1], a value of 0 means the footer is present and a value
of 1 means it's absent, the exact opposite of header presence flag where 1
means present and 0 absent.
The reason for this is compatibility with APEv1 tags, where there's no header,
footer presence was mandatory for all files, and the flags field was a zeroed
reserved field.
[1] http://wiki.hydrogenaud.io/index.php?title=Ape_Tags_Flags
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Current code returned the number of channels as channel layout in that case,
and if nret is not set then unknown layouts are typically not supported.
Also use the common parsing code. Use a temporary workaround to parse an
unknown channel layout such as '13c', after a 1 year grace period only '13C'
will work.
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '71a0472114574993df7035f4de9aa007e03817b8':
checkasm: arm: report the first clobbered register in checkasm_checked_call
Also includes 446353ea18, 59aeed93e4, and 37961044c6 to avoid breaking
too much stuff.
Merged-by: Clément Bœsch <u@pkh.me>
* commit '38efff92f1ef81f3de20ff0460ec7b70c253d714':
FATE: add a test for H.264 with two fields per packet
h264: fix decoding multiple fields per packet with slice threads
This merge includes two commits because the FATE test was useful in
order to make proper testing.
The merge gets rid of the now unused:
- SLICE_SINGLETHREAD and SLICE_SKIPED macros
- max_contexts
- "again" label in decode_nal_units()
This commit also includes the fix from d3e4d406b.
Thanks to wm4 and Michael Niedermayer for their testing.
Merged-by: Clément Bœsch <u@pkh.me>
Merged-by: Matthieu Bouron <matthieu.bouron@gmail.com>
