This is similar to the faststart option of the mov muxer, yet
in contrast to it it works together with reserve_index_space
(the equivalent to reserved_moov_size): If the reserved space
does not suffice, the data is shifted; if not, the Cues are
written at the front without shifting the data.
Several tests that cover (not only) this have been added.
Implements #7017.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Because the hls_ts_options will be misunderstand by user,
and then user can use hls_segment_options instead of hls_ts_options.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Because the hls_ts_options will be misunderstand by user that only can
be used in mpegts segments option. So add this option for segments.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Try to make the feature easier to use, especially since the user
have enabled -strict experimental manually. The user shouldn't
be surprised that hls_playlist is enabled for lhls automatically,
so change the log level from warning to info for that.
Up until now, the Matroska muxer did not use the dispositions it is
given as-is; instead it by default overrode the disposition of the first
track of a kind (audio, video, subtitles) if no track of this kind has
the default disposition set. And up until recently, it also enforced
by default that no more than one track of each kind be marked as
default.
The rationale for the former is that there are lots of containers which
lack the concept of default streams, so that it is not uncommon for no
stream to be marked as default at all; the rationale for the latter was
that up until recently, it was dubious whether the Matroska specification
allowed more than one default stream for track type (e.g. mkvmerge
disallowed it). It was this point which led to the implementation of
the above mentioned behaviour inspired by mkvmerge.
Yet the Matroska specifications have changed and now explicitly allow
to set more than one track of each type as default, so that the main
reason of not using the dispositions as-is was rendered moot. Therefore
this commit changes the default to pass the disposition through.
The matroska-mpegts-remux FATE-test has been updated to still use the
old "infer" mode so that it is still covered by FATE; the
matroska-zero-length-block test has also been updated to cover
the infer_no_subs mode. The references for lots of other FATE tests
needed to be updated because of a newly added FlagDefault element with
value zero (whereas a FlagDefault with value 1 needn't be coded at all,
as it coincided with the default value of said element).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The Matroska specifications have evolved and now allow to mark
multiple tracks of the same kind as default (whether this was legal or
not before was dubious; e.g. mkvmerge disallowed it). Yet when the
Matroska muxer is set to infer default dispositions if absent, it also
enforced the now outdated restriction. So update this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
With some minor changes by Marton Balint:
- removed trailing whitespace
- fixed network_descriptors_length
- fixed reserved_future_use flag in the start of the section
- removed unused program variable
- emit first NIT after PAT
- some other cosmetics
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
Signed-off-by: Marton Balint <cus@passwd.hu>
The build log:
** Unknown command `@code' (left as is) (in src/doc/muxers.texi l. 2020)
*** '{' without macro. Before: -map} option with the ffmpeg CLI tool. (in src/doc/muxers.texi l. 2020)
*** '}' without opening '{' before: option with the ffmpeg CLI tool. (in src/doc/muxers.texi l. 2020)
because hls_enc_key and hls_enc_iv get 16byte char
for example:
-hls_enc_key 0123456789abcdef -hls_enc_iv abcdefghijklmnop
Reviewed-by: Gyan Doshi <ffmpeg@gyani.pro>
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
the init.mp4 can be expanded with strftime the same way as
hls_segment_filename.
Signed-off-by: Nikola Pajkovsky <nikola@pajkovsky.cz>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
Some legacy applications such as AVI2MVE expect raw RGB bitmaps
to be stored bottom-up, whereas our RIFF BITMAPINFOHEADER assumes
they are always stored top-down and thus write a negative value
for height. This can prevent reading of these files.
Option flipped_raw_rgb added to AVI and Matroska muxers
which will write positive value for height when enabled.
Note that the user has to flip the bitmaps beforehand using other
means such as the vflip filter.
The Matroska muxer has always mapped the title tag to the FileDescription
element for attachments streams since support for writing attachments
was added in commit c7a63a521b. This
commit merely documents this fact.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Sequence numbers of segments should be unique, if an encoder is using shorter
than 1 second segments and it is restarted, then future segments will be using
already used sequence numbers if initial sequence number is based on the number
of seconds since epoch and not microseconds.
Signed-off-by: Marton Balint <cus@passwd.hu>
Up until now, the Matroska muxer would mark a track as default if it had
the disposition AV_DISPOSITION_DEFAULT or if there was no track with
AV_DISPOSITION_DEFAULT set; in the latter case even more than one track
of a kind (audio, video, subtitles) was marked as default which is not
sensible.
This commit changes the logic used to mark tracks as default. There are
now three modes for this:
a) In the "infer" mode the first track of every type (audio, video,
subtitles) with default disposition set will be marked as default; if
there is no such track (for a given type), then the first track of this
type (if existing) will be marked as default. This behaviour is inspired
by mkvmerge. It ensures that the default flags will be set in a sensible
way even if the input comes from containers that lack the concept of
default flags. This mode is the default mode.
b) The "infer_no_subs" mode is similar to the "infer" mode; the
difference is that if no subtitle track with default disposition exists,
no subtitle track will be marked as default at all.
c) The "passthrough" mode: Here the track will be marked as default if
and only the corresponding input stream had disposition default.
This fixes ticket #8173 (the passthrough mode is ideal for this) as
well as ticket #8416 (the "infer_no_subs" mode leads to the desired
output).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When the user opted to write the Cues at the beginning, the Cues were
simply written without checking in advance whether enough space has been
reserved for them. If it wasn't enough, the data following the space
reserved for the Cues was simply overwritten, corrupting the file.
This commit changes this by checking whether enough space has been
reserved for the Cues before outputting anything. If it isn't enough,
no Cues will be output at all and the file will be finalized normally,
yet writing the trailer will nevertheless return an error to notify
the user that his wish of having Cues at the front of the file hasn't
been fulfilled.
This change opens new usecases for this option: It is now safe to use
this option to e.g. record live streams or to use it when muxing the
output of an expensive encoding, because when the reserved space turns
out to be insufficient, one ends up with a file that just lacks Cues
but is otherwise fine.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This changes the separator character from comma to colon, but since this option
was only added recently I think it should be done for consistency with other
similar options.
Signed-off-by: Marton Balint <cus@passwd.hu>
This sets the range of the first automatically assigned PMT PID or elementary
stream PID parameters to [0x20, 0x1ffa]. You can still assign manually a PID
for a stream using AVStream->id in the wider [0x10, 0x1ffe] range as specified
by ISO13818-1. But since DVB and ATSC both reserves some PIDs, let's not allow
them to be automatically assigned.
Also make sure that assigned PID numbers are valid and fix the error message
for the previous PID collision checks.
Signed-off-by: Marton Balint <cus@passwd.hu>
Implemented as a variant of the hash muxer, reusing most functions,
and making use of the previously introduced array of hashes.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
