* qatar/master:
flvdec: remove spurious use of stream id
lavf: deprecate r_frame_rate.
lavf: round estimated average fps to a "standard" fps.
Conflicts:
ffmpeg.c
ffprobe.c
libavformat/avformat.h
libavformat/electronicarts.c
libavformat/flvdec.c
libavformat/rawdec.c
libavformat/utils.c
tests/ref/fate/iv8-demux
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fe1c1198e670242f3cf9e3e1eef27cff77f3ee23':
lavf: use dts difference instead of AVPacket.duration in find_stream_info()
avf: introduce nobuffer option
fate: make yadif tests consistent across systems
vf_hqdn3d: support 9 and 10bit colordepth
vf_hqdn3d: reduce intermediate precision
vf_hqdn3d: simplify and optimize
factor identical ff_inplace_start_frame out of two filters
vf_hqdn3d: cosmetics
avprobe/avconv: fix tentative declaration compile errors on MSVS.
Conflicts:
doc/APIchanges
ffmpeg.c
ffprobe.c
libavformat/avformat.h
libavformat/options_table.h
libavformat/utils.c
libavformat/version.h
tests/fate/filter.mak
tests/ref/fate/filter-yadif-mode0
tests/ref/fate/filter-yadif-mode1
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to its description, it is supposed to be the LCM of all the
frame durations. The usability of such a thing is vanishingly small,
especially since we cannot determine it with any amount of reliability.
Therefore get rid of it after the next bump.
Replace it with the average framerate where it makes sense.
FATE results for the wtv and xmv demux tests change. In the wtv case
this is caused by the file being corrupted (or possibly badly cut) and
containing invalid timestamps. This results in lavf estimating the
framerate wrong and making up wrong frame durations.
In the xmv case the file contains pts jumps, so again the estimated
framerate is far from anything sane and lavf again makes up different
frame durations.
In some other tests lavf starts making up frame durations from different
frame.
AVPacket.duration is mostly made up and thus completely useless, this is
especially true for video streams.
Therefore use dts difference for framerate estimation and
the max_analyze_duration check.
The asyncts test now needs -analyzeduration, because the default is 5
seconds and the audio stream in the sample appears at ~10 seconds.
Useful in cases where a significant analyzeduration is
still needed, while minimizing buffering before output.
An example is processing low-latency streams where all
media types won't necessarily come in if the
analyzeduration is small.
Additional changes by Josh Allmann <joshua.allmann@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
libspeexenc: add supported sample rates and channel layouts.
Replace usleep() calls with av_usleep()
lavu: add av_usleep() function
utvideo: mark interlaced frames as such
utvideo: Fix interlaced prediction for RGB utvideo.
cosmetics: do not use full path for local headers
lavu/file: include unistd.h only when available
configure: check for unistd.h
log: include unistd.h only when needed
lavf: include libavutil/time.h instead of redeclaring av_gettime()
Conflicts:
configure
doc/APIchanges
ffmpeg.c
ffplay.c
libavcodec/utvideo.c
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
MS Screen 1 decoder
aacdec: Fix popping channel layouts.
av_gettime: support Win32 without gettimeofday()
Use av_gettime() in various places
Move av_gettime() to libavutil
dct-test: use emms_c() from libavutil instead of duplicating it
mov: fix operator precedence bug
mathematics.h: remove a couple of math defines
Remove unnecessary inclusions of [sys/]time.h
lavf: remove unnecessary inclusions of unistd.h
bfin: libswscale: add const where appropriate to fix warnings
bfin: libswscale: remove unnecessary #includes
udp: Properly check for invalid sockets
tcp: Check the return value from getsockopt
network: Use av_strerror for getting error messages
udp: Properly print error from getnameinfo
mmst: Use AVUNERROR() to convert error codes to the right range for strerror
network: Pass pointers of the right type to get/setsockopt/ioctlsocket on windows
rtmp: Reduce the number of idle posts sent by sleeping 50ms
Conflicts:
Changelog
configure
libavcodec/aacdec.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/dct-test.c
libavcodec/version.h
libavformat/riff.c
libavformat/udp.c
libavutil/Makefile
libswscale/bfin/yuv2rgb_bfin.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Guesses the sample aspect ratio of a frame, based on both the stream and the
frame aspect ratio.
Since the frame aspect ratio is set by the codec but the stream aspect ratio
is set by the demuxer, these two may not be equal. This function tries to
return the value that you should use if you would like to display the frame.
Basic logic is to use the stream aspect ratio if it is set to something sane
otherwise use the frame aspect ratio. This way a container setting, which is
usually easy to modify can override the coded value in the frames.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
libschroedinger: Switch to function names more in line with Libav style.
Move code shared between libdirac and libschroedinger to libschroedinger.
lavfi: uninline avfilter_copy_buffer_ref_props().
lavf: add missing '*' in a doxy.
h264: Remove a commented-out function pointer typedef.
txd: Remove write-only variable in txd_decode_frame().
mmvideo.c: Remove unused variable in mm_decode_pal().
build: cosmetics: Add missing end-of-line backslashes to item lists.
build: cosmetics: Split HEADERS/OBJS/PROGS lists into one entry per line.
libschroedinger: Move a function to avoid a forward declaration.
pthread: warn on high thread counts
vf_yadif: fix missing error handling for avfilter_poll_frame()
avprobe: allow showing only one container/stream property.
lavfi: support audio in avfilter_copy_frame_props().
lavfi: avfilter_merge_formats: handle case where inputs are same
lavc: add sample rate and channel layout to AVFrame.
zerocodec: check if the previous frame is missing
doc: clarify check for NULL pointer style
Conflicts:
doc/APIchanges
doc/developer.texi
ffprobe.c
libavcodec/Makefile
libavcodec/avcodec.h
libavcodec/libdirac_libschro.c
libavcodec/libdirac_libschro.h
libavcodec/mmvideo.c
libavcodec/txd.c
libavcodec/version.h
libavcodec/zerocodec.c
libavfilter/Makefile
libavfilter/avfilter.c
libavfilter/version.h
libavformat/Makefile
libavutil/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This replaces the matroskadec one with the same name.
The advantage is not only easier reuse in other demuxers
but also that we can make the decisions after the parser.
This fixes seeking in files that mark the keyframes incorrectly,
for example the file in track ticket #1003.
The matroska variable is still kept to be able to complain
about such broken files.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Allows avoiding the buffer when using avio read, write and seek functions.
When using the ffmpeg executable -avioflags direct can be used to enable
this mode for input files, but has no effect on output files.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
make av_interleaved_write_frame() flush packets when pkt is NULL
mpegts: Fix dead error checks
vc1: Do not read from array if index is invalid.
targa: convert to bytestream2.
rv34: set mb_num_left to 0 after finishing a frame
Conflicts:
libavcodec/targa.c
libavcodec/vc1data.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch allows the user to force flushing of all queued packets
by calling av_interleaved_write_frame() with pkt set to NULL.
Signed-off-by: Jindrich Makovicka <jindrich.makovicka@nangu.tv>
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
build: ppc: drop stray leftover backslash
build: Only clean the architecture subdirectory we build for.
build: drop some unnecessary dependencies from the H.264 parser
build: prettyprinting cosmetics
libavutil: Remove pointless rational test program.
libavutil: Remove broken and pointless lzo test program.
lavf doxy: expand AVStream.codec doxy.
lavf doxy: improve AVStream.time_base doxy.
lavf doxy: add some basic documentation about reading from the demuxer.
lavf doxy: document passing options to demuxers.
lavf doxy: clarify that an AVPacket contains encoded data.
mpegtsenc: allow user triggered PES packet flushing
APIchanges: mark the place where 0.7 was cut.
APIchanges: mark the place where 0.8 was cut.
APIchanges: fill in missing dates and hashes.
smacker: convert palette and header reading to bytestream2.
alac: convert extradata reading to bytestream2.
Conflicts:
doc/APIchanges
libavcodec/smacker.c
libavcodec/x86/Makefile
libavfilter/Makefile
libavutil/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
