Use ptrdiff_t instead of unsigned for linesizes.
Fixes the armovie-escape124 FATE test with negative linesizes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
c93.c used an int for the stride and an unsigned for the current
linenumber. This does not work when using negative linesizes.
So use ptrdiff_t for stride and int for linenumber.
This fixes the cyberia-c93 FATE test when using negative linesizes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The data in SGI images is stored planar, so exporting
it via planar pixel formats is natural.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
SGI is intra-frame only; the decoder therefore does not
maintain any state between frames, so remove
the private context.
Also rename depth to nb_components.
Reviewed-by: Tomas Härdin <git@haerdin.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The earlier code used "p->data[0] + p->linesize[0] * s->height" with
the latter being unsigned, which gives the wrong value for negative
linesizes. There is also a not so obvious problem with this:
In case of negative linesizes, the last line is the start of
the allocated buffer, so using the line after the last line
would involve undefined pointer arithmetic. So don't do it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes segfaults with negative linesizes; in particular,
this affected the sunraster-(1|8|24)bit-(raw|rle) and
sunraster-8bit_gray-raw FATE tests.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
A lot of the stuff in ASV1Context is actually only used
by decoders or encoders, but not both: Of the seven contexts
in ASV1Context, only the BswapDSPContext is used by both.
So splitting makes sense.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Simply taking the Zbb REV8 instruction into use in a simple loop gives
some significant savings:
bswap_buf_c: 1081.0
bswap_buf_rvb_b: 771.0
But we can also use the 64-bit REV8 as a pseudo-SIMD instruction with
just one additional shift, and one fewer load, effectively doubling the
bandwidth. Consequently, this patch is useful even if the compile-time
target has Zbb enabled for C code:
bswap_buf_c: 1081.0
bswap_buf_rvb_b: 341.0 (this patch)
On the other hand, this approach fails miserably for bswap16_buf as the
ratio of shifts and stores becomes unfavorable compared to naïve C:
bswap16_buf_c: 1542.0
bswap16_buf_rvb_b: 1803.7
Unrolling to process 128 bits (4 samples) at a time actually worsens
performance ever so slightly:
bswap_buf_c: 1081.0
bswap_buf_rvb_b: 408.5
Unfortunately, it is common, and will remain so, that the Bit
manipulations are not enabled at compilation time. This is an official
policy for Debian ports in general (though they do not support RISC-V
officially as of yet) to stick to the minimal target baseline, which
does not include the B extension or even its Zbb subset.
For inline helpers (CPOP, REV8), compiler builtins (CTZ, CLZ) or
even plain C code (MIN, MAX, MINU, MAXU), run-time detection seems
impractical. But at least it can work for the byte-swap DSP functions.
To avoid data dependencies, this does the following unroll, which
requires one extra but probably free addition:
coeff = (b * left_weight) >> decorr_shift;
b += a;
a -= coeff;
b -= coeff;
swap(a, b);
We never guard against a user freeing/stealing the private context;
and returning AVERROR(EIO) is inappropriate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Move ROUND_MUL* macros to their only users and the Celt
macros to opus_celt.h. Also improve the other headers
a bit while at it.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Simply don't include opus_pvq.h in opus_celt.h: The latter only
uses pointers to CeltPVQ.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
opus.h (which is used by all the Opus code) currently includes
several structures only used by the parser and the decoder;
several elements of OpusContext are even only used by the decoder.
This commit therefore moves the part of OpusContext that is shared
between these two components (and used by ff_opus_parse_extradata())
out into a new structure and moves all the other accompanying
structures and functions to a new header, opus_parse.h; the
functions itself are also moved to a new file, opus_parse.c.
(This also allows to remove several spurious dependencies
of the Opus parser and encoder.)
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: out of array access
Fixes: 51648/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TRUEHD_fuzzer-4644322217164800
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
More than 2 channels seems unsupported, the code seems to just output empty extra channels
Fixes: Timeout
Fixes: 51569/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_SPEEX_fuzzer-5511509165342720
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 119760682 - -2084600173 cannot be represented in type 'int'
Fixes: 50993/clusterfuzz-testcase-minimized-ffmpeg_dem_VIVIDAS_fuzzer-6745781167587328
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Otherwise p->linesize[0] * y will be evaluated as an unsigned
which leads to segfaults in case linesize is negative.
This happens in the apng-dispose-previous FATE-test in case
one makes get_buffer return pictures with negative linesizes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This might happen in avio_write() if size == 0
when the direct codepath is taken. It is undefined behaviour
according to the spec although it happens to work in practice.
Fixes the webm-webvtt-remux FATE-test under UBSan.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
partial_corr is an int16_t and so the av_clipl_int32()
never clips and can be removed. This also avoids
undefined left-shifts of negative numbers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Return immediately if not enough leftover bits are available
when flushing. This is simpler and also avoids an
init_get_bits(gb, NULL, 0) (which currently leads to NULL + 0,
which is UB; this affects the lossless-wma(|-1|-2|-rawtile)
FATE tests).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Happens when flushing. This triggers NULL + 0 (which is UB) in
init_get_bits_xe (which previously errored out, but the return value
has not been checked) and in copy_bits().
This fixes the wmavoice-(7|11|19)k FATE-tests with UBSan.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
src2 is used in CAVS_SUBPIX_HV iff FULL is true (it is exactly
for the egpr functions); otherwise it might be NULL. So check
for FULL before doing pointer arithmetic.
Fixes a "src/libavcodec/cavsdsp.c:524:1: runtime error: applying
non-zero offset 8 to null pointer" from UBSan.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
As long as ff_mpeg12_common_init() existed in mpeg12.c,
it added a dependency of mpeg12.o on mpegvideodata.o
(which provides ff_mpeg2_dc_scale_table, which is used
in ff_mpeg12_common_init()). mpegvideodata.o is normally
provided by the mpegvideo subsystem and therefore several
codecs and the MPEG-1/2 parser added a configure dependency
on said subsystem (additionally, the eatqi decoder just
added a Makefile dependency on mpegvideodata.o).
Given that ff_mpeg12_common_init() is no more, these dependencies
can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It only sets [yc]_dc_scale_table and these tables are only
read in ff_set_qscale(); but the MPEG-1/2 decoders don't call
ff_set_qscale() at all.
(Furthermore, given that intra_dc_precision is always zero
for a decoder at this point, ff_mpeg12_common_init()
actually set these pointers to what ff_mpv_common_defaults()
already set them.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is better place for these declarations than
mpeg12data.h as RL VLC are just a variant of VLCs.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Starting with an h264 implementation. Can be extended to support other codecs.
A few caveats:
- OpenGOP streams are currently not supported. The firt packet must be an IDR
frame.
- In some streams, a few frames at the end may not get a reordered PTS when
they reference frames past EOS. The code added to derive timestamps from
previous frames needs to extended.
Addresses ticket #502.
Signed-off-by: James Almer <jamrial@gmail.com>
Provide optimized implementation for vsse_intra8 for arm64.
Performance tests are shown below.
- vsse_5_c: 87.7
- vsse_5_neon: 26.2
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Co-authored-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide optimized implementation of vsse8 for arm64.
Performance comparison tests are shown below.
- vsse_1_c: 141.5
- vsse_1_neon: 32.5
Benchmarks and tests are run with checkasm tool on AWS Graviton 3.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Add vectorized implementation of nsse8 function.
Performance comparison tests are shown below.
- nsse_1_c: 256.0
- nsse_1_neon: 82.7
Benchmarks and tests run with checkasm tool on AWS Graviton 3.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
