Restore alphabetical order in lists, break overly long lines, do some
prettyprinting, add some explanatory section comments, group parts
together that belong together logically.
Otherwise the 'lcov -q --remove' run fails with the following error:
lcov: ERROR: cannot write to coverage.info!
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
When out-of-tree builds now use a relative path, the '-b' option of lcov
is not needed, so just pass the current directory to it in this case.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Currently only 2 profiles are evaluated because they are the only 2
with distributed test sequences.
- CID 1260: YUV 4:2:2 10 bits with block-adaptive interlace coding,
from ticket 4876;
- CID 1270: YUV 4:4:4 10 bits (HR), 1920x839, from ticket 4581.
They were generated from the ticket sequences by running the
following kind of command-line;
ffmpeg -i $INPUT -an -sn -vcodec copy -vframes 1 -y $OUTPUT.mov
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This fixes fate with FF_API_LAVF_BITEXACT disabled.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
It provides the following features:
* verify correctness by comparing output to the C version.
* detect failure to save and restore clobbered callee-saved registers.
* detect 32-bit parameters being used as if they were 64-bit in x86-64
(the upper halves are not guaranteed to be zero - but in practice
they very often are, which makes those bugs hard to spot otherwise).
* easy benchmarking.
Compile by running 'make checkasm'.
Execute by running 'tests/checkasm/checkasm'.
Optional arguments are '--bench' to run benchmarks for all functions,
'--bench=<pattern>' to run benchmarks for all functions that starts with
<pattern>, and '<integer>' to seed the PRNG for reproducible results.
Contains unit tests for most h264pred functions to get started, more tests
can be added afterwards using those as a reference.
Loosely based on code from x264. Currently only supports x86 and x86-64,
but additional architectures shouldn't be too much of an obstacle to add.
Note that functions with floating point parameters or floating point
return values are not supported. Some compiler-specific features or
preprocessor hacks would likely be required to add support for that.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
The intention of this change is to allow separation of API tests from the
existing tests, and also to have a place for the API test source/executable
files so they're not mixed in with the actual library code.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is not sufficient to run "make fate-ffprobe" on a remote system:
The ffprobe output contains the relative path to the testfile, it is
necessary to run the test from the build directory.
One solution is to use a script like the following as --target-exec:
ssh target "cd /remote/build/directory; $(printf "%q " "$@")"
The file is already present in git and by using it we can perform more tests
without the need of fate samples
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The new reference.pnm is a freely licensed replacement. The photo has
been taken by Reinhard Tartler on August 28 2014, and is licensed under
the expat license as stated at http://www.jclark.com/xml/copying.txt
* commit '23dfa00b88fc927d4c1854ab4fc60f5c6398f3ac':
fate: explicitly set the default THREADS value
Conflicts:
tests/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the default of '1' more explicit than defaulting to '1' in
fate-run.sh and regression-funcs.sh if THREADS is not set.
Fixes the reported thread count in fate-cpu if THREADS is not set.
* commit '706208ef47bffd525c982975d2756f7b2b220b8d':
fate: Split fate-pixdesc tests and dispatch them through Make
Conflicts:
tests/fate-run.sh
tests/ref/fate/filter-pixdesc
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b70d7a4ac72d23f3448f3b08b770fdf5f57de222':
lavc: add a native Opus decoder.
Conflicts:
Changelog
configure
libavcodec/version.h
Fate tests pass with both avresample as well as swresample based opus decoder, but
are disabled (reference files are very large so i want to think a day or 2 about
if theres an alternative or if they could be avoided, they also dont match the
official samples)
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Initial implementation by Andrew D'Addesio <modchipv12@gmail.com> during
GSoC 2012.
Completion by Anton Khirnov <anton@khirnov.net>, sponsored by the
Mozilla Corporation.
Further contributions by:
Christophe Gisquet <christophe.gisquet@gmail.com>
Janne Grunau <janne-libav@jannau.net>
Luca Barbato <lu_zero@gentoo.org>
* commit 'a8cc88b1a23dc1515f27cfa98af16a273c539091':
tests/Makefile: allow FILTER* to be called with lists of filter names
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'eddff165b4cdc1f064245a4bad6f4265581c12b1':
fate: add utility function to test parser, demuxer, and decoder
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The tests are disabled as 2 do not pass yet
(fate-hevc-conformance-PPS_A_qualcomm_7 and fate-hevc-conformance-RAP_A_docomo_4)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9ab5f7107d2f1411e9fda6c36af64524e5ed31d1':
FATE: add lavr mixing tests
The tests do not pass, and thus where disabled
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Only check dependencies if invoking the make targets 'check'
or anything matching 'fate%' except 'fate-rsync'.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '2d2d6a4883479403798f4ed46941d5b365823570':
lavf: add a raw WavPack muxer.
apetag: add support for writing APE tags
matroskaenc: support muxing WavPack
Conflicts:
libavformat/Makefile
libavformat/allformats.c
libavformat/apetag.h
libavformat/version.h
libavformat/wvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4a27a52a1f74016095b7aee1b4a422cf62217ade':
fate: Don't use files from SRC_PATH in the actual tests
indeo4: reuse context block VLC for band instead of defaulting
Conflicts:
tests/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If building out of tree, make sure the filter scripts are copied
into the build tree before running tests. This makes sure that
SRC_PATH doesn't need to exist on the remote system (or doesn't
need to exist at the same path).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '768e44d044bc32de1e58c198a3708d186af7e966':
build: tune down the output of lcov/gcov
Conflicts:
tests/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a77aed142cade3beb0cd43f879d4f47daae23b8a':
fate: Rename video filters file and add separate video filters target
Conflicts:
tests/fate/filter-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b357f1d1d3dd1d6672df6a397a31be425d31b6d1':
fate: Split audio filters into their own separate file
Conflicts:
tests/Makefile
tests/fate/filter.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The gcov/lcov are a common toolchain for visualizing code coverage with
the GNU/Toolchain. The documentation and implementation of this
integration was heavily inspired from the blog entry by Mike Melanson:
http://multimedia.cx/eggs/using-lcov-with-ffmpeg/
* qatar/master:
fate: add an option to generate the references
Conflicts:
doc/fate.texi
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e4d349b4014ee2a03f521027e0bd1ace4a9e60bd':
fate: h264: Add dependencies
fate: ea: Add dependencies
fate: Do not unconditionally run libavutil tests
rtpenc_chain: Remove unused variable
nuv: check for malloc failure when allocating extradata
nuv: use the stream indices generated by avformat_new_stream()
Conflicts:
tests/fate/ea.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This remove the owner, group and permission preservation on fatesample checkouts
These caused problems for durandal_1707
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ec444c84cfd30ef34a4e7b4ec7ee77d7e5250d25':
mpegaudiodec: Fix buffer handling on random access
mpegaudio: Refactor mp3on4 flush function
fate: Add dependencies for audio tests
fate: cosmetics: Group idct8x8 test together with all other libavcodec tests
fate: More fine-grained dependencies for libavcodec test programs
Conflicts:
tests/fate/audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This causes make to exit with an error message if a nonexistent
dependency is specified rather than silently dropping the test.
Signed-off-by: Mans Rullgard <mans@mansr.com>
FATE_SAMPLES_FFPROBE is a different list than FATE_FFPROBE, the same way
FATE_SAMPLES_FFMPEG is a different list than FATE_FFMPEG; these
FATE_SAMPLES_<tool> lists are in the FATE_EXTERN list, which is only
used when SAMPLES is set.
