The HEVC decoder will start setting stereoscopic view position (left or
right) based on 3D Reference Displays Info SEI message in future
commits. This information should be merged with container-derived
stereo3D side data.
Only do it in reget_buffer().
The purpose of this clearing this flag is to prevent it for
unintentionally persisting across multiple invocations of this function
on one frame, however that is only a problem if the frame is not
unreffed between uses, which is only the case with reget_buffer().
In other cases the caller may legitimately want to set the discard flag
and should have the option of doing so.
Reorganize the code such that the frame threading code does not call the
decoders directly, but instead calls back into the generic decoding
code. This avoids duplicating the logic that wraps the decoder
invocation and allows receive_frame()-based decoders to use frame
threading.
Further work by Timo Rothenpieler <timo@rothenpieler.org>.
Also, set draining=1 in case a bitstream filter returns an
internally-triggered EOF. While no bitstream filters currently inserted
by decoders will do that, that may change in the future and it is better
to cover this case.
This commit is the analog of 3f11eac757
for decoding: It sets the AV_FRAME_FLAG_KEY and (for video decoders)
also pict_type to AV_PICTURE_TYPE_I. It furthermore stops setting
audio frames as always being key frames -- it is wrong for e.g.
TrueHD/MLP. The latter also affects TAK and DFPWM.
The change already improves output for several decoders where
it has been forgotten to set e.g. pict_type like speedhq, wnv1
or tiff. The latter is the reason for the change to the exif-image-tiff
FATE test reference file.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is useful when the lifetime of the object to be shared
is the whole decoding process as it allows to avoid having
to sync them every time in update_thread_context.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Frame-threaded decoders with inter-frame dependencies
use the ThreadFrame API for syncing. It works as follows:
During init each thread allocates an AVFrame for every
ThreadFrame.
Thread A reads the header of its packet and allocates
a buffer for an AVFrame with ff_thread_get_ext_buffer()
(which also allocates a small structure that is shared
with other references to this frame) and sets its fields,
including side data. Then said thread calls ff_thread_finish_setup().
From that moment onward it is not allowed to change any
of the AVFrame fields at all any more, but it may change
fields which are an indirection away, like the content of
AVFrame.data or already existing side data.
After thread A has called ff_thread_finish_setup(),
another thread (the user one) calls the codec's update_thread_context
callback which in turn calls ff_thread_ref_frame() which
calls av_frame_ref() which reads every field of A's
AVFrame; hence the above restriction on modifications
of the AVFrame (as any modification of the AVFrame by A after
ff_thread_finish_setup() would be a data race). Of course,
this av_frame_ref() also incurs allocations and therefore
needs to be checked. ff_thread_ref_frame() also references
the small structure used for communicating progress.
This av_frame_ref() makes it awkward to propagate values that
only become known during decoding to later threads (in case of
frame reordering or other mechanisms of delayed output (like
show-existing-frames) it's not the decoding thread, but a later
thread that returns the AVFrame). E.g. for VP9 when exporting video
encoding parameters as side data the number of blocks only
becomes known during decoding, so one can't allocate the side data
before ff_thread_finish_setup(). It is currently being done afterwards
and this leads to a data race in the vp9-encparams test when using
frame-threading. Returning decode_error_flags is also complicated
by this.
To perform this exchange a buffer shared between the references
is needed (notice that simply giving the later threads a pointer
to the original AVFrame does not work, because said AVFrame will
be reused lateron when thread A decodes the next packet given to it).
One could extend the buffer already used for progress for this
or use a new one (requiring yet another allocation), yet both
of these approaches have the drawback of being unnatural, ugly
and requiring quite a lot of ad-hoc code. E.g. in case of the VP9
side data mentioned above one could not simply use the helper
that allocates and adds the side data to an AVFrame in one go.
The ProgressFrame API meanwhile offers a different solution to all
of this. It is based around the idea that the most natural
shared object for sharing information about an AVFrame between
decoding threads is the AVFrame itself. To actually implement this
the AVFrame needs to be reference counted. This is achieved by
putting a (ownership) pointer into a shared (and opaque) structure
that is managed by the RefStruct API and which also contains
the stuff necessary for progress reporting.
The users get a pointer to this AVFrame with the understanding
that the owner may set all the fields until it has indicated
that it has finished decoding this AVFrame; then the users are
allowed to read everything. Every decoder may of course employ
a different contract than the one outlined above.
Given that there is no underlying av_frame_ref(), creating
references to a ProgressFrame can't fail. Only
ff_thread_progress_get_buffer() can fail, but given that
it will replace calls to ff_thread_get_ext_buffer() it is
at places where errors are already expected and properly
taken care of.
The ProgressFrames are empty (i.e. the AVFrame pointer is NULL
and the AVFrames are not allocated during init at all)
while not being in use; ff_thread_progress_get_buffer() both
sets up the actual ProgressFrame and already calls
ff_thread_get_buffer(). So instead of checking for
ThreadFrame.f->data[0] or ThreadFrame.f->buf[0] being NULL
for "this reference frame is non-existing" one should check for
ProgressFrame.f.
This also implies that one can only set AVFrame properties
after having allocated the buffer. This restriction is not deep:
if it becomes onerous for any codec, ff_thread_progress_get_buffer()
can be broken up. The user would then have to get a buffer
himself.
In order to avoid unnecessary allocations, the shared structure
is pooled, so that both the structure as well as the AVFrame
itself are reused. This means that there won't be lots of
unnecessary allocations in case of non-frame-threaded decoding.
It might even turn out to have fewer than the current code
(the current code allocates AVFrames for every DPB slot, but
these are often excessively large and not completely used;
the new code allocates them on demand). Pooling relies on the
reset function of the RefStruct pool API, it would be impossible
to implement with the AVBufferPool API.
Finally, ProgressFrames have no notion of owner; they are built
on top of the ThreadProgress API which also lacks such a concept.
Instead every ThreadProgress and every ProgressFrame contains
its own mutex and condition variable, making it completely independent
of pthread_frame.c. Just like the ThreadFrame API it is simply
presumed that only the actual owner/producer of a frame reports
progress on said frame.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are lots of files that don't need it: The number of object
files that actually need it went down from 2011 to 884 here.
Keep it for external users in order to not cause breakages.
Also improve the other headers a bit while just at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Many users mistakenly think that hwaccel is an instance of a decoder,
and cannot find the corresponding decoder name in the logs. Log
hwaccel name so user know hwaccel has taken effect.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
The signature of these wrappers is more complicated due to a need to
distinguish between "failed allocating side data" and "side data was
already present".
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Validate that a hw_frames_ctx is available before using it for
the AVHWAccel.free_frame_priv callback, and don't require it to
be present when the callback is not in use by the HWAccel.
v2: check for free_frame_priv (Hendrik)
v3: return EINVAL (Christoph Reiter)
v4: better commit message (Hendrik)
v5: fix typo with missed frames_ctx (Lynne)
See[1]: https://github.com/msys2/MINGW-packages/pull/19050
Fixes: be07145109 ("avcodec: add AVHWAccel.free_frame_priv callback")
CC: Lynne <dev@lynne.ee>
CC: Christoph Reiter <reiter.christoph@gmail.com>
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Avoids allocations and therefore error checks: Syncing
hwaccel_picture_private across threads can't fail any more.
Also gets rid of an unnecessary pointer in structures and
in the parameter list of ff_hwaccel_frame_priv_alloc().
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Lynne <dev@lynne.ee>
Tested-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The changed references for fate-hevc-dv-rpu fate-mov-zombie happen because,
unlike ffmpeg and ffplay, ffprobe never injected packet side data, so the
display matrix side data at the container level is now present in the output
frames.
Signed-off-by: James Almer <jamrial@gmail.com>
Instead, use forward declarations; and in order not to affect
any user include these headers for them, but not internally.
This has the advantage of removing implicit inclusions of these
headers from almost all files providing codecs.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This commit is the AVHWAccel analogue of commit
20f9727018: It moves the private fields
of AVHWAccel to a new struct FFHWAccel extending AVHWAccel
in an internal header (namely hwaccel_internal.h).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
All usages of ff_hwaccel_frame_priv_alloc() have the same pattern:
Check for whether a hwaccel is in use; check whether it needs
private frame-specific data; allocate the AVBuffer and set
it.
This commit modifies ff_hwaccel_frame_priv_alloc() to perform
this task on its own.
(It also seems that the H.264 decoder did not perform proper
cleanup in case the buffer could not be allocated. This has been
changed.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This decoding flag makes decoders drop all frames after a parameter
change, but what exactly constitutes a parameter change is not well
defined and will typically depend on the exact use case.
This functionality then does not belong in libavcodec, but rather in
user code
Copy packet side data to the output frame in ff_decode_frame_props_from_pkt()
instead of in discard_samples(), having the latter only applying the skip if
required.
This will be useful for the following commit.
Signed-off-by: James Almer <jamrial@gmail.com>
