The AVFormat stream count can be larger due external factors, such as
an id3 tag appended.
Avoid an out of bound read.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This swaps which field is set when the Window Acknowledgement Size
and Set Peer BW packets are received, renames the fields in
order to clarify their role further and adds verbose comments
explaining their respective roles and how well the code currently
does what it is supposed to.
The Set Peer BW packet tells the receiver of the packet (which
can be either client or server) that it should not send more data
if it already has sent more data than the specified number of bytes,
without receiving acknowledgement for them. Actually checking this
limit is currently not implemented.
In order to be able to check that properly, one can send the
Window Acknowledgement Size packet, which tells the receiver of the
packet that it needs to send Acknowledgement packets
(RTMP_PT_BYTES_READ) at least after receiving a given number of bytes
since the last Acknowledgement.
Therefore, when we receive a Window Acknowledgement Size packet,
this sets the maximum number of bytes we can receive without sending
an Acknowledgement; therefore when handling this packet we should set
the receive_report_size field (previously client_report_size).
Signed-off-by: Martin Storsjö <martin@martin.st>
Also rename comments and log messages accordingly,
and add clarifying comments for some hardcoded values.
The previous names were taken from older, reverse engineered
references.
These names match the official public rtmp specification, and
matches the names used by wirecast in annotating captured
streams. These names also avoid hardcoding the roles of server
and client, since the handling of them is irrelevant of whether
we act as server or client.
The RTMP_PT_PING type maps to RTMP_PT_USER_CONTROL.
The SERVER_BW and CLIENT_BW types are a bit more intertwined;
RTMP_PT_SERVER_BW maps to RTMP_PT_WINDOW_ACK_SIZE and
RTMP_PT_CLIENT_BW maps to RTMP_PT_SET_PEER_BW.
Signed-off-by: Martin Storsjö <martin@martin.st>
The string codec name need not be as long as the value we are
comparing it to, so memcmp may make decisions derived from
uninitialised data that valgrind then complains about (though the
overall result of the function will always be the same). Use
strncmp instead, which will stop at the first zero byte and
therefore not encounter this issue.
Use webm muxer for VP8, VP9 and Opus codec, mp4 muxer otherwise.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
The dash_write function drops data, if no IOContext is initialized.
Since the mp4 muxer is used in "frag_custom" mode, data is only
written when calling av_write_frame(NULL) explicitly and thus
there will be no data loss.
To add support for webm as subordinate muxer, which doesn't have
such a mode, a dynamic buffer is required to provide an always
initialized IOContext.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously all mapped streams of a media type (video, audio) where assigned
to a single AdaptationSet. Using the DASH live profile it is mandatory, that
the segments of all representations are aligned, which is currently not
enforced. This leads to problems when using video streams with different
key frame intervals. So to play safe, default to one AdaptationSet per stream,
unless overwritten by explicit assignment.
To get the old assignment scheme, use
-adaptation_sets "id=0,streams=v id=1,streams=a"
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Using the characters "v" or "a" instead of stream index numbers for assigning
streams in the adaption_set option, all streams matching that given type will
be added to the AdaptationSet.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Also makes sure all streams are assigned to exactly one AdaptationSet.
This patch is originally based partially on code by Vignesh Venkatasubramanian.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Bandwidth information is required in the manifest, but not always
provided by the demuxer. In that case calculate the bandwith based
on the size and duration of the first segment.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
The current implementation creates new segments comparing
pkt->pts - first_pts > nb_segs * min_seg_duration
This works fine, but if the keyframe interval is smaller than "min_seg_duration"
segments shorter than the minimum segment duration are created.
Example: keyint=50, min_seg_duration=3000000
segment 1 contains keyframe 1 (duration=2s < total_duration=3s)
and keyframe 2 (duration=4s >= total_duration=3s)
segment 2 contains keyframe 3 (duration=6s >= total_duration=6s)
segment 3 contains keyframe 4 (duration=8s < total_duration=9s)
and keyframe 5 (duration=10s >= total_duration=9s)
...
Segment 2 is only 2s long, shorter than min_seg_duration = 3s.
To fix this, new segments are created based on the actual written duration.
Otherwise the option name "min_seg_duration" is misleading.
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
If set, adds a UTCTiming tag in the manifest.
This is part of the recommendations listed in the "Guidelines for
Implementations: DASH-IF Interoperability Points" [1][2]
Section 4.7 describes means for the Availability Time Synchronization.
A usable default is "https://time.akamai.com/?iso"
[1] http://dashif.org/guidelines/
[2] http://dashif.org/wp-content/uploads/2016/12/DASH-IF-IOP-v4.0-clean.pdf
(current version as of writing)
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Martin Storsjö <martin@martin.st>
Servers seem to be happy to receive the wrapped-around value as long
as they receive a report, otherwise they timeout.
Initially reported and analyzed by Thomas Bernhard.
to avoid rebuffering on the clientside for difficult network conditions.
Signed-off-by: Anton Schubert <ischluff@mailbox.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
Appends Z to timestamp to force ISO8601 datetime parsing as UTC.
Without Z, some browsers (Chrome) interpret the timestamp as
localtime and others (Firefox) interpret it as UTC.
Signed-off-by: Anton Schubert <ischluff@mailbox.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
If a read fails, the current code will free the data but leave the size
non-zero. Make sure the size is zeroed in such a case.
CC: libav-stable@libav.org
Bug-Id: 1001
Found-By: Kamil Frankowicz
Signed-off-by: Sean McGovern <gseanmcg@gmail.com>
A negative chunk size is illegal and would end up used as
length for memcpy, where it would lead to memory accesses
out of bounds.
Found-by: Paul Cher <paulcher@icloud.com>
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This moves work from the configure to the Make stage where it can
be parallelized and ensures that pkgconfig files are updated when
library versions change.
Bug-Id: 449
When the input string is too large, so the second condition in if ()
fails, the code will erroneously execute the else branch, indexing the
mac_to_unicode table with a negative index.
CC: libav-stable@libav.org
Bug-Id: 1000
Found-By: Kamil Frankowicz
When receiving fragmented packets, the first packet declares the size,
and the later ones normally are small follow-on packets that don't repeat
the size and the other header fields. But technically, the later fragments
also can have a full header, declaring a different size than the previous
packet.
If the follow-on packet declares a larger size than the initial one, we
could end up writing outside of the allocation.
This fixes out of bounds writes.
Found-by: Paul Cher <paulcher@icloud.com>
Reviewed-by: Paul Cher <paulcher@icloud.com>
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This seems to have been added by mistake in 11de006b, by not
noticing the negation for the existing condition. This block does
not contain any code that accesses the codec field in AVStream.
This function is meant to serve as a complement to compute_pkt_fields2,
which is guarded by FF_API_COMPUTE_PKT_FIELDS2 && FF_API_LAVF_AVCTX.
Signed-off-by: Martin Storsjö <martin@martin.st>
This implements Spherical Video V1 and V2, as described in the
spatial-media collection by Google.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Supporting the system was a nice joke for the 9 release, but it has
run its course. Nowadays Plan 9 receives no testing and has no
practical usefulness.
The rtmpdh code can use crypto libraries which may require
a process global init. (gcrypt is one of the libraries
where the rtmpdh test code can fail if global init hasn't been
done, depending on gcrypt version.)
Signed-off-by: Martin Storsjö <martin@martin.st>
Functionally similar to av_packet_add_side_data(). Allows the use of an
already allocated buffer as stream side data.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
A number of new pix_fmts* have been added to AviSynth+:
16-bit packed RGB and RGBA
10-, 12-, 14, and 16-bit YUV 4:2:0, 4:2:2, and 4:4:4
8-, 10-, 12-, 14-, and 16-bit Planar RGB
8-, 10-, 12-, 14-, and 16-bit Planar YUVA and Planar RGBA
10-, 12-, 14-, and 16-bit GRAY variants
32-bit floating point Planar YUV(A), Planar RGB(A), and GRAY
*some of which are not currently available pix_fmts here and were
not added to the demuxer due to this
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Stream timebase should be set using avpriv_set_pts_info, otherwise
avctx->pkt_timebase is not correct, leading to A/V desync.
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Stephen Hutchinson <qyot27@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This prevented the code from correctly exporting the rotation matrix
which caused a few samples to be displayed wrong.
Introduced in ecd2ec69ce.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
FLAC streams originating from the FLAC encoder send updated and more
complete STREAMINFO metadata as part of the last packet, so write that
to CodecPrivate instead of the incomplete one available in extradata
during init.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
aac_adtstoasc makes the aac extradata available only after the first packet
is filtered, and as packet side data.
Assume extradata will be available as part of the first packet if
avpriv_mpeg4audio_get_config() fails the first time due to missing extradata
and reserve space for the OutputSampleRate element in the Tracks master.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This matrix needs to be applied after all others have (currently only
display matrix from trak), but cannot be handled in movie box, since
streams are not allocated yet. So store it in main context, and apply
it when appropriate, that is after parsing the tkhd one.
Fate tests are updated accordingly.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The use of TLSv1_*_method() disallows newer protocol versions; instead
use SSLv23_*_method() and then explicitly disable the deprecated
protocol versions which should not be supported.
When the macro is expanded with a semicolon following it and the
macro itself contains a semicolon, we ended up in double semicolons,
which is treated as a statement that disallows further declarations.
This avoids errors about mixed declarations and statements on gcc,
after ee05079766.
Signed-off-by: Martin Storsjö <martin@martin.st>
Instead use our own struct, which we already use when using
gcrypt and gnutls.
In OpenSSL 1.1, the DH struct has been made opaque.
Signed-off-by: Martin Storsjö <martin@martin.st>
For 'nclx', the latest edition of the standard switched from JPEG XR
to 23001-8, which matches the current order of our entries. Bounds
are preserved as a sanity check.
For 'nclc', qtff edition 2016-09-13 introduced a few new entries.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This also fixes a minor bug introduced in the codecpar conversion, where
the termination condition for extracting the extradata does not match
the actual extradata setting code. As a result, the packet durations
made up by lavf go back to their values before the codecpar conversion.
That is of little consequence since that code should eventually be
dropped completely.
This way they can be reused by other code without including the whole
decoder-specific hevcdec.h
Also, add the HEVC_ prefix to them, since similarly named values exist
for H.264 as well and are sometimes used in the same code.
The spec says
9: Interlaced with bottom field displayed first and top field stored first
14: Interlaced with top field displayed first and bottom field stored first
And avcodec.h states
AV_FIELD_TB, //< Top coded first, bottom displayed first
AV_FIELD_BT, //< Bottom coded first, top displayed first
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
According to the public RTMP specification, these 4 bytes should
be zero.
librtmp in server mode assumes that the RTMPE (FP9) handshake is
used if these bytes are nonzero.
Signed-off-by: Martin Storsjö <martin@martin.st>
When acting as server, the server can include a "clientid" property
in some status messages. But this should be a unique number
identifying the client session, not identifying the server itself.
In practice, omitting it works just as well as including this
incorrect field.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure that e.g. Adobe FME actually reacts to it. As long
as the value we've been sending is the default one (128), the bug
hasn't been noticed.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some applications such as Adobe FME append lots of parameters
here, making it easily overflow the current limit.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is supposed to be a flag. The only currently defined value is
AVIO_SEEKABLE_NORMAL, but other ones may be added in the future.
However all the current lavf code treats this field as a bool (mainly
for historical reasons).
Change all those cases to properly check for AVIO_SEEKABLE_NORMAL.
This was introduced in bc2a32969e.
The whole block that the statement was added to is only
relevant when used as a demuxer, but the other statements
there have had other if statements guarding them. Make
sure to only run this whole block if being used as a
demuxer.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This was added before edts support existed, and is no longer
valid.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This breaks files with legitimate single-entry edit lists,
and the hack, introduced in f03a081df0,
has no link to any known sample in its commit message.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This reverts commit 25bacd0a0c.
Since 230b1c070, the bytewise AV_W*() macros only expand their
argument once, so revert to the more readable version of these.
Signed-off-by: Martin Storsjö <martin@martin.st>
AV_WB32 can be implemented as a macro that expands its parameters
multiple times (in case AV_HAVE_FAST_UNALIGNED isn't set and the
compiler doesn't support GCC attributes); make sure not to read
multiple times from the source in this case.
Signed-off-by: Martin Storsjö <martin@martin.st>
There are samples with invalid stsc that may work fine as is and
do not need extradata change. So ignore any out of range index, and
error out only when explode is set.
Found-by: Matthieu Bouron <matthieu.bouron@stupeflix.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
When writing a fragmented file, we by default write an index pointing
to all the fragments at the end of the file. This causes constantly
increasing memory usage during the muxing. For live streams, the
index might not be useful at all.
A similar fragment index is written (but at the start of the file) if
the global_sidx flag is set. If ism_lookahead is set, we need to keep
data about the last ism_lookahead+1 fragments.
If no fragment index is to be written, we don't need to store information
about all fragments, avoiding increasing the memory consumption
linearly with the muxing runtime.
This fixes out of memory situations with long live mp4 streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
This function needs to return false, or data in the additional tables
will be skipped, and the decoder will not be able to decode frames
associated with them.
Store data from each stsd in a separate extradata buffer, keep track of
the stsc index for read and seek operations, switch buffers when the
index differs. Decoder is notified with an AV_PKT_DATA_NEW_EXTRADATA
packet side data.
Since H264 supports this notification, and can be reset midstream, enable
this feature only for multiple avcC's. All other stsd types (such as
hvc1 and hev1) need decoder-side changes, so they are left disabled for
now.
This is implemented only in non-fragmented MOVs.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This avoids the danger that get_bits.h might get indirectly #included before
BITSTREAM_READER_LE is defined.
Also sort headers into canonical order where appropriate.
Split version files into one line per symbol/directive to allow compatibility
with the Solaris linker without preprocessing and eliminate $ from version file
templates to simplify the postprocessing shell command.
Previously, we required the minimum number of bytes required for
the full box. Don't strictly require the astronomical body and additional
notes fields, but do require an altitude field (which currently isn't
parsed). This matches the initial length check at the start of the function
(which doesn't know about the variable length place field).
Signed-off-by: Martin Storsjö <martin@martin.st>
This was missed in e1eb0fc960, when ff_interleaved_peek was
changed to include const during the evolution of the patch.
Signed-off-by: Martin Storsjö <martin@martin.st>
As long as caller only writes packets using av_interleaved_write_frame
with no manual flushing, this should allow us to always have accurate
durations at the end of fragments, since there should be at least
one queued packet in each stream (except for the stream where the
current packet is being written, but if the muxer itself does the
cutting of fragments, it also has info about the next packet for that
stream).
Signed-off-by: Martin Storsjö <martin@martin.st>
