* commit '75d642a944d5579e4ef20ff3701422a64692afcf':
vaapi_vp8: Explicitly include libva vp8 decode header
vaapi_decode: Ignore the profile when not useful
lavc/vaapi: Add VP8 decode hwaccel
vp8: Add hwaccel hooks
This merge is a noop as these commits are already under review on the
mailing list. doc/libav-merge.txt is updated to track its progress.
Merged-by: Clément Bœsch <u@pkh.me>
* commit 'd7bc52bf456deba0f32d9fe5c288ec441f1ebef5':
imgutils: add a function for copying image data from GPU mapped memory
Merged-by: Clément Bœsch <u@pkh.me>
Not used by anything at all since we don't auto insert lavr filters.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The 'sqrt' and 'cbrt' scalers were added in commit
80262d8c86, but their symbolic option values
only made available to the showwaves filter, not showwavespic, despite
the scalers working properly by their numerical option values.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Be more careful when an input stream encounters EOF when its filtergraph
has not been configured yet. The current code would immediately mark the
corresponding output streams as finished, while there may still be
buffered frames waiting for frames to appear on other filtergraph
inputs.
This should fix the random FATE failures for complex filtergraph tests
after a3a0230a98
This merges Libav commit 94ebf55. It was previously skipped.
This is the last filter init related Libav commit that was skipped, so
this also removes the commits from doc/libav-merge.txt.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
If AVVideotoolboxContext.cv_pix_fmt_type is set to 0, don't set the
kCVPixelBufferPixelFormatTypeKey value on the VT decoder.
This makes VT output its native format, which can be much faster on
some hardware iterations (if the native format does not match with
the requested format, it will be converted, which is slow).
The default is still forcing nv12.
Allow all struct fields to be accessed directly, as long as they're
public.
Before this change, many fields were "public", but could be accessed via
AVOption only. This meant they were effectively not public, but were
present for documentation purposes, which was incredibly confusing at
best.
This is an extended version of the AVFrame.opaque field, which can be
used to attach arbitrary user information to an AVFrame.
The usefulness of the opaque field is rather limited, because it can
store only up to 32 bits of information (or 64 bit on 64 bit systems).
It's not possible to set this field to a memory allocation, because
there is no way to deallocate it correctly.
The opaque_ref field circumvents this by letting the user set an
AVBuffer, which makes the user data refcounted.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Merges Libav commit 04f3bd3496.
When user use the hls_wrap, there have many problem:
1. some platform refersh the old but usefull segment
2. CDN(Content Delivery Network) Deliver HLS not friendly
The hls_wrap is used to wrap segments for use little space,
now user can use hls_list_size and hls_flags delete_segments
instead it.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Adds a `-hls_flags +temp_file` which will write segment data to
filename.tmp, and then rename to filename when the segment is complete.
This patch is similar in spirit to one used in Plex's ffmpeg fork, and
allows a transcoding webserver to ensure incomplete segment files are
never served up accidentally.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Bodecs Bela <bodecsb@vivanet.hu>
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Detecting a leap second depends on a lot of things, segment time, segment
offset, system leap second implementation, the removed part is a huge
simplification which can be misleading, so it is best to remove it.
Signed-off-by: Marton Balint <cus@passwd.hu>
Clarify that setting loop=0 is required to make the stream loop infinitely, rather than saying that a value "less than 1" is needed.
Signed-off-by: Lou Logan <lou@lrcd.com>
For a pure video tile effect, and enabling better integration of playback windows
into other programs. It would improve the looks in many situations and avoid ugly
hacks like this: http://stackoverflow.com/q/31465630/315024
Signed-off-by: Lucas Sandery <lucas-sandery@users.noreply.github.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '7d7355aa92bb36ca0765c49a569a999bcb96f332':
x86: Add SSSE3_SLOW CPU flag and related convenience macros
Merged-by: James Almer <jamrial@gmail.com>
Name and purpose are more appropriate there since the code isn't
an ideal example.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This allows testing EC and non EC. Avoids spending most time in EC on
high res samples and reduces the likelyhood of hitting timeouts
Fixes: Timeout in 467/fuzz-2-ffmpeg_VIDEO_AV_CODEC_ID_H263_fuzzer
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Return a channel layout and the number of channels based on the specified name.
This function is similar to av_get_channel_layout(), but can also parse unknown
channel layout specifications.
Unknown channel layout specifications are a decimal number and a capital 'C'
suffix, in order to not break compatibility with the lowercase 'c' suffix,
which is used for a guessed channel layout with the specified number of
channels.
Signed-off-by: Marton Balint <cus@passwd.hu>
add line_spacing parameter to set the space between two lines
Based on an idea by: Leandro Santiago <leandrosansilva@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
start_number option starts the playlist sequence number
(#EXT-X-MEDIA-SEQUENCE) from the specified number. Unless hls_flags
single_file is set, it also specifies starting sequence numbers of
segment and subtitle filenames. Sometimes it is usefull to have unique
starting numbers at each run, but currently it is only achiveable by
setting this parameter manually.
This patch enables to specify start_number source parameter by
introducing hls_start_number_source with 3 possible values:
generic/epoch/datetime. This ensures to set start sequence number
automatically for practically unique numbers. Generic option is the
default and this is the curent behaviour: start_number option value
specifies the start sequence number. (start_number default value is 0)
If hls_start_number_source is set to epoch, then the start number will
be the seconds since epoch (1970-01-01 00:00:00). If set to datetime,
then the start sequence number will be based on the current date/time
value as YYYYmmddHHMMSS. e.g. 20161231235659.
Hls speficication allows 64 bit integers as sequence numbers. This patch
also changes some code where only 32 bit integer values were handled
correctly.
Reviewed-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
This commit adds the avio_get_dyn_buf function which allows accessing
the
content of a DynBuffer without destroying it.
This is required in matroskaenc for preliminary writing (correct) mkv
headers.
Context for this change is fixing regression bug #5977.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
1st:
This patch makes it possible to put actual segment file size (measured
in bytes) and/or duration (calculated in microseconds) into segment
filenames. This feature is useful when post-processing live streaming
access log files. New behaviour works only when -use_localtime option
is set and second_level_segment_size or/and
second_level_segment_duration new hls_flags are specified. %%s is the
placeholder for size and %%t for duration in hls_segment_filename
option. Fix sized trailing zeropadding also works eg. %%09s or %%023t.
A command to test new features:
./ffmpeg -loglevel info -y -f lavfi -i color=c=red:size=640x480:r=25 -f
lavfi -i sine=f=440:b=4:r=44100 -c:v mpeg2video -g 25 -acodec aac
-cutoff 20000 -ac 2 -ar 44100 -ab 192k -f hls -hls_time 3 -hls_list_size
5 -hls_flags
second_level_segment_index+second_level_segment_size+second_level_segment_duration
-use_localtime 1 -use_localtime_mkdir 1 -hls_segment_filename
"segment_%Y%m%d%H%M%S_%%04d_%%08s_%%013t.ts" stream.m3u8
2nd:
doc/muxers: beside second_level_segment_duration and second_level_segment_size,
added some more details and example to hls_segment_filename,
use_localtime, use_localtime_mkdir, hls_flags. hls_flags option list
reformatted to table
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
cutoff is implemented as an option global to lavc, but supported only
by a few encoders. This fact is now reflected in its documentation. ac3's
support of this option is added for completeness.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Pass the cutoff option from lavc's avcodec_options[] to libmp3lame's
lowpass option, without allowing to adjust its default behavior.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
in filenames
Putting date/time values into segment filenames is very usefull.
But to produce non-conflicting segment filenames with -use_localtime
option with date/time
values in hls_segment_filename option, sometimes is not enough.
Like in cases when multiple segments produced in the same second.
But hlsenc currently does not make possible to use segment index (%d) at
the
same time whe use_localtime is in effect, due to identifier conflict.
This patch makes possible to use strftime identifiers and still put
segment index (%d) at same time in segment filenames by introducing
second_level_segment_index flag. When -use_localtime is active,
identifier %d is for month day index, so %%d is the segment index
placeholder. This enhanced behaviour only exists when new
second_level_segment_index flag is specified.
For instance putting 'segment_%Y%m%d%H%M%S_%%05d.ts' value into
-hls_segment_filename option and specifing -hls_flags
second_level_segment_index and -use_localtime 1, may produce segment
filename as 'segment_20161230235758_00002.ts'
An example:
ffmpeg -loglevel info -y -f lavfi -i color=c=red:size=640x480:r=25 -f
lavfi -i anullsrc=r=44100:cl=stereo -c:v mpeg2video -g 25 -acodec aac
-cutoff 20000 -ac 2 -ar 44100 -ab 192k -f hls -hls_time 3 -hls_list_size
5 -hls_flags delete_segments+second_level_segment_index -use_localtime 1
-hls_segment_filename "segment_%Y%m%d%H%M%S_%%05d.ts" stream.m3u8
will produce segments filenames:
....
segment_20161227005902_00013.ts
segment_20161227005902_00014.ts
segment_20161227005902_00015.ts
segment_20161227005903_00016.ts
segment_20161227005903_00017.ts
segment_20161227005903_00018.ts
segment_20161227005903_00019.ts
segment_20161227005903_00020.ts
....
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Height of canvas produced by drawtext varies depending on symbols in
text, so add example for printing separate texts aligned horizontally.
Wording suggested by Lou Logan <lou@lrcd.com>
Signed-off-by: Andrey Utkin <andrey.utkin@pb.com>
Signed-off-by: Lou Logan <lou@lrcd.com>
It is useful for testing/debugging and will also be used as the default
filter in the following commit adding pre-decode filtering to avoid
having a separate non-filtered codepath.
Decode the Image Data Section (which contains merged pictures).
Support RGB/A and Grayscale/A in 8bits and 16 bits per channel.
Support uncompress and rle decompression in Image Data Section.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Examples use the native FFmpeg AAC encoder but it is no longer
considered experimental and therefore not required.
Signed-off-by: Lou Logan <lou@lrcd.com>
While no decoder currently exports spherical information, this type
represents a frame property that has to be passed through from container
to frames.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
While no decoder currently exports spherical information, this type
represents a frame property that has to be passed through from container
to frames.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Supporting the system was a nice joke for the 9 release, but it has
run its course. Nowadays Plan 9 receives no testing and has no
practical usefulness.
mythtv have problem with non-seekable dont write duration and filesize
and there have problem with some other server and player with 0 value
duation and filesize.
So add a flv flags to fix the ticket and make a choose for users.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Expands the parser to also accept the separator '-' in addition to
'+', and take the negative sign into consideration.
The optional sign for the first factor in the expression is already
covered by parsing for an integer.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Functionally similar to av_packet_add_side_data(). Allows the use of an
already allocated buffer as stream side data.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
If makeopts_fate is set, these makeopts are used for running the
tests instead of the normal makeopts. If it isn't set, the normal
makeopts variable is used as before.
This is useful if remote testing on a lesser machine where a large
number of parallel jobs might be undesireable, while wanting to speed
up the build with many parallel processes.
Signed-off-by: Martin Storsjö <martin@martin.st>
This patch moves the av_frame_make_writable() call from fill_yuv_image
to get_video_frame so that its argument can be the actual frame that
will be sent to the encoder.
This fixes data corruption issues in codecs that keep references on
one or several previous frames.
Signed-off-by: Sam Hocevar <sam@hocevar.net>
Reviewed-by: wm4
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Functionally similar to av_packet_add_side_data(). Allows the use of an
already allocated buffer as stream side data.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
The Intel binary iHD driver does not support the
VASurfaceAttribMemoryType, so surface allocation will fail when using
it.
(cherry picked from commit 2124711b95)
The driver being used is detected inside av_hwdevice_ctx_init() and
the quirks field then set from a table of known device. If this
behaviour is unwanted, the user can also set the quirks field
manually.
Also adds the Intel i965 driver quirk (it does not destroy parameter
buffers used in a call to vaRenderPicture()) and detects that driver
to set it.
(cherry picked from commit 4926fa9a4a)
Also contains the following changes to the library:
- add ff_ prefix to functions
- remove cplusplus defines.
- add FF_ prefix to contants and some structs
- remove true peak calculation feature, since it uses its own resampler, and
af_loudnorm does not need it.
- remove version info and some fprintf(stderr) functions
- convert to use av_malloc
- always use histogram mode for LRA calculation, otherwise LRA data is slowly
consuming memory making af_loudnorm unfit for 24/7 operation. It also uses a
BSD style linked list implementation which is probably not available on all
platforms. So let's just remove the classic mode which not uses histogram.
- add ff_thread_once for calculating static histogram tables
- convert some functions to void which cannot fail
- remove intrinsics and some unused headers
- add support for planar audio
- remove channel / sample rate changer function, in ffmpeg usually we simply
alloc a new context
- convert some static variables to defines
- declare static histogram variables as aligned
- convert some initalizations to mallocz
- add window size parameter to init function and remove window size setter
function
- convert return codes to AVERROR
- fix indentation
Signed-off-by: Marton Balint <cus@passwd.hu>
Documents options and behaviour, noting when 'chunks' option will
not be honoured.
Signed-off-by: Tom Butterworth <bangnoise@gmail.com>
Signed-off-by: Martin Vignali <martin.vignali@gmail.com>
