The new options reset the timestamps at each new segment, so that the
generated segments will have timestamps starting close to 0.
It is meant to address trac ticket #1425.
* commit '18e6f087c4a50bede8449ee164778945480be50c':
img2: document the options available
hls: improve options description
hls: use a meaningful long name
hls: add start_number option
h264: check for invalid zeros_left before writing
Conflicts:
doc/demuxers.texi
doc/muxers.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Gif demuxer is capable of extracting multiple frames from gif file.
In conjunction with gif decoder it implements support for reading
animated gifs.
Demuxer has two options available to user: default_delay and min_delay.
These options are for protection from too rapid gif animations. In practice
it is standard approach to slow down rendering of this kind of gifs. If you try to
play gif with delay between frames of one hundredth of second (100fps) using
one of major web browsers, you get significantly slower playback,
around 10 fps. This is because browser detects that delay value is less than some
threshold (usually 2 hundredths of second) and reset it to default value (usually 10
hundredths of second, which corresponds to 10fps). Manipulating these options user
can achieve the same effect during conversion to some video format. Otherwise user
can set them to not protect from rapid animations at all.
The other case when these options necessary is for gif images encoded according to
gif87a standard since prior to gif89a there was no delay information included in file.
Bump lavf minor version.
Signed-off-by: Vitaliy E Sugrobov <vsugrob@hotmail.com>
The following commit will make it useless.
The crop_scale_vflip FATE test changes because of off-by-one differences
in output when vflipped slices are passed to sws.
'k', 'M', and 'G' are SI (unit) prefixes or metric prefixes,
not 'number postfixes'. Also, the statement regarding binary
prefixes ("powers of 2 are used instead of powers of 10")
might be misinterpreted (1 kB = 10^3 B, but 1 KiB != 2^3 B).
Signed-off-by: Diego Biurrun <diego@biurrun.de>
PIX is an image file format that was used by the BRender 3d engine.
Signed-off-by: Aleksi Nurmi <aleksi.nurmi@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The new expansion mechanism uses the %{...} notation.
For compatibility reasons, it must be enabled explicitly,
but a warning is printed if a conflict is likely to happen.
* commit 'bf5f46b4cc47b7a4568119f224057d4ff91b6cdd':
APIChanges: add entry for av_read_packet deprecation
mxfdec: fix typo in mxf_read_seek()
avserver: use freopen to redirect stdin/out/err to /dev/null
avserver: remove daemon mode
configure: Check for -Werror parameters on clang
doxygen: remove obsolete options from Doxyfile
configure: Add option to disable all command line programs
Conflicts:
Changelog
configure
doc/APIchanges
doc/ffserver.conf
doc/ffserver.texi
ffserver.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This code spews a multitude of warnings with glibc (unchecked
return values), some of them possibly warranted. Furthermore,
the deamonisation is not suitable for use with typical startup
scripts as it does not provide the PID of the daemon in any way.
Users wishing to run avserver as a daemon can still do so using
start-stop-daemon or equivalent tools.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
The options USE_INLINE_TREES, SHOW_DIRECTORIES and HTML_ALIGN_MEMBERS
became obsolete with doxygen 1.8.1 (releaded 2012-05-19). The generated
outpu for older doxygen versions should not change since they were set
to the default value.
The mention of multimedia stream sounds more like multiple
elementary media streams like video and audio multiplexed
into a multimedia container format.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
* commit '5ff998a233d759d0de83ea6f95c383d03d25d88e':
flacenc: use uint64_t for bit counts
flacenc: remove wasted trailing 0 bits
lavu: add av_ctz() for trailing zero bit count
flacenc: use a separate buffer for byte-swapping for MD5 checksum on big-endian
fate: aac: Place LATM tests and general AAC tests in different groups
build: The A64 muxer depends on rawenc.o for ff_raw_write_packet()
Conflicts:
doc/APIchanges
libavutil/version.h
tests/fate/aac.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This function does the low-level work of av_opt_set_from_string()
but can be used when there is no option context or when a generic
handling of unknown keys is needed.
av_opt_set_from_string() is changed to make use of it.
* qatar/master:
doc: add apidoc target for doxygen API documentation
matroskadec: do not use avpacket internals
Conflicts:
doc/Makefile
libavformat/matroskadec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Documentation includes only the externally visible API of the installed
headers.
Based on a patch by Anton Khirnov <anton@khirnov.net>.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '14f031d7ecfabba0ef02776d4516aa3dcb7c40d8':
dv: use AVStream.index instead of abusing AVStream.id
lavfi: add ashowinfo filter
avcodec: Add a RFC 3389 comfort noise codec
lpc: Add a function for calculating reflection coefficients from samples
lpc: Add a function for calculating reflection coefficients from autocorrelation coefficients
lavr: document upper bound on number of output samples.
lavr: add general API usage doxy
indeo3: remove duplicate capabilities line.
fate: ac3: Add dependencies
Conflicts:
Changelog
doc/filters.texi
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/version.h
libavfilter/Makefile
libavfilter/af_ashowinfo.c
libavfilter/allfilters.c
libavfilter/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '381dc1a5ec0925b281c573457c413ae643567086':
fate: ac3: Place E-AC-3 tests and AC-3 tests in different groups
fate: Add shorthands for acodec PCM and ADPCM tests
avconv: Drop unused function argument from do_video_stats()
cmdutils: Conditionally compile libswscale-related bits
aacenc: Drop some unused function arguments
rtsp: Avoid a cast when calling strtol
nut: support textual data
nutenc: verbosely report unsupported negative pts
Conflicts:
cmdutils.c
ffmpeg.c
libavformat/nut.c
libavformat/nutenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If the first argument can be read as a video size, set that output size
in the scale. This allows to specify in a filtergraph scale=qcif or
scale=320x240.
This is not completely safe, for example in case of a typo in the video
size string the first argument will be read as the input width
expression, giving rise to a confusing comment.
They are essential to be able to use the utils without av_malloc()
That is for example use with malloc(), memalign(), some other
private allocation function, on the stack or others.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
configure: fix tests for 2-arg math functions
doc: git-howto: Clarify comment about pushing series of commits
ivi_common: Drop unused function parameter from decode_band()
cook: Remove some silly Doxygen comments
cook: Remove senseless maybe_reformat_buffer32() function
cook: cosmetics: Better names for joint_decode() function parameters
cook: cosmetics: Better name for ccpl COOKSubpacket member
doxygen: Add av_alloc_size to list of predefined macros
doxygen: Drop some pointless entries from PREDEFINED macros list
h263: avoid memcpys over array bound in motion vector caching for obmc
Conflicts:
configure
doc/git-howto.texi
libavcodec/cook.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
They dont work at all and trash the output totally
also they are unmaintained -> that is if you want to maintain them
contact us !
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c68317ebbe4915035df0b08c23eea7a0b80ab881':
lavc: fix documentation for AVCodecContext.delay
atrac3: return an error if extradata_size is not a specific known size
lavc: use the correct API version guard macro for avcodec_encode_audio()
Move Doxyfile into the doc/ subdirectory
doxygen: Build Doxygen documentation in the doc/ subdirectory
dfa: use av_memcpy_backptr() where previously impossible
av_memcpy_backptr: Drop no longer necessary malloc padding
Conflicts:
.gitignore
libavcodec/avcodec.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0c03cc68386443f1e96ab6fb358220faf67cd5ff':
mp3: exit on parsing error in mp_decode_frame
rtmppkt: Avoid unescaped backslash in Doxygen comment
fate-lavfi: replace sed/grep/cut combos with awk
build: Plan 9 support
Conflicts:
configure
tests/lavfi-regression.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow to specify a filename where to put the filtergraph description.
This is useful to override limitations or glitches of particular shell
environments, and allows a level of indirection for specifying
filtergraphs.
* commit 'add3a6902ea4d459f36655656a1f8daa409118a7':
lavu: bump major to 52
Conflicts:
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2b8dd371e4d276ca0d342e82b8b4cc281be0630a':
lavu: postpone recent deprecations until the next major bump
APIchanges: update lavr bump date
avconv: only apply presets when we have an encoder.
atrac3: replace a calculation with FFALIGN()
atrac3: remove unused ATRAC3Context field, sample_rate
atrac3: use sizeof(variable) instead of sizeof(type)
atrac3: simplify MDCT window calculation
Conflicts:
doc/APIchanges
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This adds support for building on Plan 9 x86-32. The compat/plan9
directory contains these items:
- replacements for the 'head' and 'printf' shell commands
- wrapper for main() to disable FPU exceptions
Larger required changes to the system are described in the
documentation.
Signed-off-by: Mans Rullgard <mans@mansr.com>
In addition to the recent tables mess, the AVOption defaults behavior
changed, so an old lavc used with a new lavu will get completely messed
up defaults.
This commit introduces a new AVPacket side data type:
AV_PKT_DATA_STRINGS_METADATA. Its main goal is to provide a way to
transmit the metadata from the AVFilterBufferRef up to the AVFrame. This
is at the moment "only" useful for lavfi input from libavdevice:
lavd/lavfi only outputs packets, and the metadata from the buffer ref
kept in its context needs to be transmitted from the packet to the frame
by the decoders. The buffer ref can be destroyed at any time (along with
the metadata), and a duplication of the AVPacket needs to duplicate the
metadata as well, so the choice of using the side data to store them was
selected.
Making sure lavd/lavfi raises the metadata is useful to allow tools like
ffprobe to access the filters metadata (it is at the moment the only
way); ffprobe will now automatically show the AVFrame metadata in any
customizable output format for users. API users will also be able to
access the AVFrame->metadata pointer the same way ffprobe does
(av_frame_get_metadata).
All the changes are done in this single commit to avoid some memory
leaks: for instances, the changes in lavfi/avcodec.c are meant to
duplicate the metadata from the buffer ref into the AVFrame. Unless we
have an internal way of freeing the AVFrame->metadata automatically, it
will leak in most of the user apps. To fix this problem, we introduce
AVCodecContext->metadata and link avctx->metadata to the current
frame->metadata and free it at each decode frame call (and in the codec
closing callback for the last one). But doing this also means to update
the way the tiff decoder already handles the AVFrame->metadata (it's the
only one decoder with frame metadata at the moment), by making sure it
is not trying to free a pointer already freed by the lavc internals.
The lavfi/avcodec.c buffer ref code is based on an old Thomas Kühnel
work, the rest of the code belongs to the commit author.
Signed-off-by: Thomas Kühnel <kuehnelth@googlemail.com>
Signed-off-by: Clément Bœsch <ubitux@gmail.com>
* 'docu' of https://github.com/rdp/FFmpeg:
docu: add word resize to scale filter, to make searching for the word resize simpler
docu: change verb flite
docu: add flite ffmpeg example
docu: fix flite example
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b5198a2637b7b45b0049a1d4b386a06f016f2520':
configure: tms470: add mapping for -mfpu=vfpv3-d16 flag
configure: recognise Minix as OS
configure: work around bug in ash shell
eval-test: make table static const
lavr: handle clipping in the float to s32 conversion
nut: support pcm codecs not mapped in avi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b7f1010c8fce09096057528f7cd29589ea1ae7df':
tools: do not use av_pix_fmt_descriptors directly.
pixdesc: add functions for accessing pixel format descriptors.
build: add support for Tru64 (OSF/1)
md5: Allocate a normal private context for the opaque md5 context pointer
Conflicts:
cmdutils.c
doc/APIchanges
ffprobe.c
libavformat/md5enc.c
libavutil/version.h
tools/graph2dot.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e002e3291e6dc7953f843abf56fc14f08f238b21':
Use the new aes/md5/sha/tree allocation functions
avutil: Add functions for allocating opaque contexts for algorithms
svq3: fix pointer type warning
svq3: replace unsafe pointer casting with intreadwrite macros
parseutils-test: various cleanups
Conflicts:
doc/APIchanges
libavcodec/svq3.c
libavutil/parseutils.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0a75d1da23b8659ec49391469bb592da12760077':
options_table: refs option is not snow-only
random_seed: Support using CryptGenRandom on windows
doc: update the faq entry about custom I/O
Conflicts:
doc/faq.texi
libavcodec/options_table.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Make av_pix_fmt_descriptors table static on next major bump.
Making the table public is dangerous, since the caller has no way to
know how large it actually is. It also prevents adding new fields to
AVPixFmtDescriptor without a major bump.
The current API where the plain size is exposed is not of much
use - in most cases it is allocated dynamically anyway.
If allocated e.g. on the stack via an uint8_t array, there's no
guarantee that the struct's members are aligned properly (unless
the array is overallocated and the opaque pointer within it
manually aligned to some unspecified alignment).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'b522000e9b2ca36fe5b2751096b9a5f5ed8f87e6':
avio: introduce avio_closep
mpegtsenc: set muxing type notification to verbose
vc1dec: Use correct spelling of "opposite"
a64multienc: change mc_frame_counter to unsigned
arm: call arm-specific rv34dsp init functions under if (ARCH_ARM)
svq1: Drop a bunch of useless parentheses
parseutils-test: do not print numerical error codes
svq1: K&R formatting cosmetics
Conflicts:
doc/APIchanges
libavcodec/svq1dec.c
libavcodec/svq1enc.c
libavformat/version.h
libavutil/parseutils.c
tests/ref/fate/parseutils
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It has not worked for anything other than fringe codecs (asv1/2, mdec,
mjpeg[b]) since about 2003 and nobody ever noticed or complained. This
sufficiently proves that there are no users of this option who have a
clue of what they are doing, so it is completely useless.
* qatar/master:
mingw/cygwin: Stop adding -fno-common to gcc CFLAGS
Restructure av_log_missing_feature message
rtp: Support packetization/depacketization of opus
file: Set the return value type for lseek to int64_t.
ppc: fix Altivec build with old compilers
build: add LTO support for PGI compiler
build: add -Mdse to PGI optimisation flags
rtpenc_vp8: Update the packetizer to the latest spec version
rtpdec_vp8: Make the depacketizer implement the latest spec draft
doc: allow building with old texi2html versions
avutil: skip old_pix_fmts.h since it is just a list
Conflicts:
libavcodec/aacdec.c
libavcodec/h264.c
libavcodec/ppc/fmtconvert_altivec.c
libavcodec/utils.c
libavformat/file.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
x86: vc1: call ff_vc1dsp_init_x86() under if (ARCH_X86)
x86: cavs: call ff_cavsdsp_init_x86() under if (ARCH_X86)
x86: call most of the x86 dsp init functions under if (ARCH_X86)
doc: support the new website layout
doc: remove a warning from filters.texi
doc: initial nut documentation
segment: drop global headers setting
lavu: fix typo in Makefile
Conflicts:
doc/Makefile
doc/filters.texi
doc/t2h.init
libavcodec/fmtconvert.c
libavcodec/proresdsp.c
libavcodec/x86/Makefile
libavcodec/x86/vc1dsp_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
yuv4mpeg: return proper error codes.
Give all anonymously typedeffed structs in headers a name
fate: Add parseutils test
parseutils-test: Drop random colors from parsing test
vf_pad/scale: use double precision for aspect ratios.
build: error on variable-length arrays
ppc: swscale: rework yuv2planeX_altivec()
ppc: fmtconvert: kill VLA in float_to_int16_interleave_altivec()
x86: dsputil: kill VLA in gmc_mmx()
libspeexenc: Updated commentary to reflect recent changes
libspeexenc: Add an option for enabling DTX
doc/APIchanges: fill in missing dates and hashes.
lavr: bump major to 1 and declare it stable.
lavr: change the type of the data buffers to uint8_t**.
lavc: deprecate the audio resampling API.
Conflicts:
cmdutils.h
configure
doc/APIchanges
ffplay.c
libavcodec/dwt.h
libavcodec/libspeexenc.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavformat/asf.h
tests/fate/libavutil.mak
tests/ref/fate/parseutils
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This generalizes the previous work on disposition printing.
Disposition flags are shown in a dedicated section, which should improve
output intellegibility, extensibility and filtering operations.
This breaks output syntax with the recently introduced disposition
printing.
Be compatible with texi2html 5.0 which doesn't search relative
file names in search paths anymore.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
This practice is not supported by the MinGW developers, and even requires
patching the MinGW runtimes in newer versions. Furthermore, we now support
build with MSVC, so this section is rendered useless.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This practice is not supported by the MinGW developers, and even requires
patching the MinGW runtimes in newer versions. Furthermore, we now support
build with MSVC, so this section is rendered useless.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* qatar/master:
libopus: Remap channels using libopus' internal remapping.
Opus decoder using libopus
avcodec: document the use of AVCodecContext.delay for audio decoding
vc1dec: add flush function for WMV9 and VC-1 decoders
http: Increase buffer sizes to cope with longer URIs
nutenc: const correctness for ff_put_v_trace/put_s_trace function arguments
h264_refs: Fix debug tprintf argument types
golomb: const correctness for get_ue()/get_se() function arguments
get_bits: const correctness for get_bits_trace()/get_xbits_trace() arguments
Conflicts:
Changelog
libavcodec/Makefile
libavcodec/version.h
libavformat/http.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7751e4693dd10ec98c20fbd9887233b575034272':
ogg: check that the expected number of headers had been parsed
libx264: change default to closed gop to match x264cli
Use avcodec_free_frame() to free AVFrames.
lavf: use a malloced AVFrame in try_decode_frame().
lavc: add avcodec_free_frame().
lavc: ensure extended_data is set properly on decoding
lavc: initialize AVFrame.extended_data in avcodec_get_frame_defaults()
lavc: use av_mallocz to allocate AVFrames.
lavc: rename the argument of avcodec_alloc_frame/get_frame_defaults
Conflicts:
doc/APIchanges
doc/examples/decoding_encoding.c
libavcodec/utils.c
libavcodec/version.h
libavfilter/src_movie.c
libavformat/oggdec.c
libavformat/oggdec.h
libavformat/oggparsetheora.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The GRAPH_DESCRIPTION string supplied to graph2dot must include explicitly
defined inputs and outputs which are not normally part of the command line
used in a real invocation.
This clarifies that requirement, and provides an example.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
* commit '3f7fd59d151a2773f0e2e93e56b6b13ec6e5334b':
avformat: fix typo in avformat_close_input
mp3enc: write Xing TOC
mp3enc: support MPEG-2 and MPEG-2.5 in Xing header.
mp3enc: downgrade some errors in writing Xing frame to warnings
lavf: flush the output AVIOContext in av_write_trailer().
lavf: cosmetics, reformat av_write_trailer().
avio: flush the internal buffer in avio_close()
Enhance doc on asyncts audiofilter
cmdutils: avoid setting data pointers to invalid values in alloc_buffer()
libavcodec: remove av_destruct_packet_nofree()
Conflicts:
libavcodec/avpacket.c
libavformat/mp3enc.c
libavformat/nutenc.c
libavformat/utils.c
libavformat/version.h
tests/ref/lavf/voc
tests/ref/lavf/voc_s16
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
os_support: Choose between direct.h and io.h using a configure check
os_support: Include io.h instead of direct.h on mingw32ce
x86: ac3dsp: Only refer to the ac3_downmix_sse symbol if it has been declared
swscale: Remove two bogus asserts
ac3: move ac3_downmix() from dsputil to ac3dsp
lavr/audio_mix_matrix: acknowledge the existence of LFE2.
mlp_parser: avoid mapping multiple disctinct TrueHD channels to the same Libav channel.
lavu/audioconvert: add a second low frequency channel.
Conflicts:
doc/APIchanges
libavcodec/ac3dsp.c
libavcodec/ac3dsp.h
libavcodec/mlp_parser.c
libavutil/audioconvert.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Favor the use of plain AVPicture over AVFrame, especially when the use of
AVFrame is not required like in the case of tmp_picture.
Also adopt more straightforward names, to avoid frame/picture confusion.
Allow to specify options affecting the segment list generation.
In particular: add +live and +cache flags.
For a full discussion read trac ticket #1642:
http://ffmpeg.org/trac/ffmpeg/ticket/1642
Also add live M3U8 generation example.
Make internal small_strptime() function public, and use it in place of
strptime().
This allows to avoid a dependency on strptime() on systems which do not
support it.
In particular, fix trac ticket #992.
FFT in MIPS implementation is working iteratively instead
of "recursively" calling functions for smaller FFT sizes.
Some of DSP and format convert utils functions are also optimized.
Signed-off-by: Nedeljko Babic <nbabic@mips.com>
Reviewed-by: Vitor Sessak <vitor1001@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
build: eamad: Add missing dependency on mpegvideo code
build: utvideoenc: Add missing dependency on Huffman code
avopt: Reorder the default_val struct, making i64 the first field
Conflicts:
configure
doc/APIchanges
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows dynamic reconfiguration of the filter.
The callback uses some code that was in the init function. Hence this code
has been moved in its own function.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
* qatar/master:
MSS1 and MSS2: set final pixel format after common stuff has been initialised
MSS2 decoder
configure: handle --disable-asm before check_deps
x86: Split inline and external assembly #ifdefs
configure: x86: Separate inline from standalone assembler capabilities
pktdumper: Use a custom define instead of PATH_MAX for buffers
pktdumper: Use av_strlcpy instead of strncpy
pktdumper: Use sizeof(variable) instead of the direct buffer length
Conflicts:
Changelog
configure
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/codec_desc.c
libavcodec/dct-test.c
libavcodec/imgconvert.c
libavcodec/mss12.c
libavcodec/version.h
libavfilter/x86/gradfun.c
libswscale/x86/yuv2rgb.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ec36aa69448f20a78d8c4588265022e0b2272ab5':
x86: Fix linking with some or all of yasm, mmx, optimizations disabled
configure: Add more fine-grained SSE CPU capabilities flags
avfilter: x86: Use more precise compile template names
x86: cosmetics: Comment some #endifs for better readability
g723_1: add comfort noise generation
utvideoenc: Switch to dsputils' median prediction
utvideoenc: Avoid writing into the input picture
avtools: remove the distinction between func_arg and func2_arg.
avconv: make the -passlogfile option per-stream.
avconv: make the -pass option per-stream.
cmdutils: make -codecs print lossy/lossless flags.
lavc: add lossy/lossless codec properties.
Conflicts:
Changelog
cmdutils.c
configure
doc/APIchanges
ffmpeg.h
ffmpeg_opt.c
ffprobe.c
libavcodec/codec_desc.c
libavcodec/g723_1.c
libavcodec/utvideoenc.c
libavcodec/version.h
libavcodec/x86/mpegaudiodec.c
libavcodec/x86/rv40dsp_init.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The cpia video decoder is intended to be used with the v4l2 demuxer.
There are some small changes to the v4l2 demuxer to support the
variable frame length of the format.
Fixes ticket #1537
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In case CFLAGS/LDLIBS are already defined and conflicting with the
pkg-config flags, give priority to the latter since they are used to
detect compilation flags.
This should fix for example the case where there are many different
instances of a library, CFLAGS=-I/foo/include and pkg-config cflags say
-I/bar/include.
* qatar/master:
build: allow non-standard variations of linker -l/-L flags
Add reminders to update the codec descriptor list with new codec IDs.
Conflicts:
Makefile
configure
libavcodec/avcodec.h
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Based on patch by rogerdpack <rogerpack2005@gmail.com>
Tested-by: Roger Pack <rogerdpack2@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch accepts 'timeout' option for input mode only. As far as i know, UDP output cannot introduce delays.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This example should be useful to show the basic functionality of the
libswscale API.
More advanced features (scaling options etc., colorspace tweaking) may be
added later.
This is a port of the MPlayer smartblur filter (libmpcodecs/vf_smartblur.c)
by Michael Niedermayer.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Extract of the output:
| Individual channels:
| NAME DESCRIPTION
| FL front left
| FR front right
| <snip>
| SDR surround direct right
|
| Standard channel layouts:
| NAME DECOMPOSITION
| mono FC
| stereo FL+FR
| <snip>
| octagonal FL+FR+FC+BL+BR+BC+SL+SR
| downmix DL+DR
