Fixes: signed integer overflow: -1727985666 - 538976288 cannot be represented in type 'int'
Fixes: 15031/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TRUEMOTION2_fuzzer-5100228035739648
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
low_power mode will use a fixed HW engine (SFC), thus can offload EU usage.
high quality mode will take EU usage (AVS sampler).
Performance and EU usage (Render usage) comparsion on Intel(R) Xeon(R) CPU E3-1225 v5 @ 3.30GHz:
High quality mode : ffmpeg -hwaccel qsv -c:v h264_qsv -i bbb_sunflower_1080p_30fps_normal_2000frames.h264 \
-vf scale_qsv=w=1280:h=736:mode=hq -f null -
fps=389
RENDER usage: 28.10 (provided by MSDK metrics_monitor)
Low Power mode: ffmpeg -hwaccel qsv -c:v h264_qsv -i ~/bbb_sunflower_1080p_30fps_normal_2000frames.h264 \
-vf scale_qsv=w=1280:h=736:mode=low_power -f null -
fps=343
RENDER usage: 0.00
Low power mode (SFC) may be disabled if not supported by
MSDK/Driver/HW, and replaced by AVS mode interanlly.
Signed-off-by: Zhong Li <zhong.li@intel.com>
The mov flavour of timed text uses the first two bytes of the packet as
a length field. And up until 11bef2fe said length field has been read
correctly in the mov2textsub bsf. But since then the next two bytes are
read as if they were the length field. This is fixed in this commit.
Reviewed-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, when an element was skipped, it was relied upon
ffio_limit to make sure that there is enough data available to skip.
ffio_limit itself relies upon the availability of the file's size. As
this needn't be available, the check has been refined: First one byte
less than intended is skipped, then another byte is read, followed by a
check of the error flags.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This commit fixes a number of bugs:
1. There was no check that no read error/EOF occured during
ebml_read_uint, ebml_read_sint and ebml_read_float.
2. ebml_read_ascii and ebml_read_binary did sometimes not forward
error codes; instead they simply returned AVERROR(EIO).
3. In particular, AVERROR_EOF hasn't been used and no dedicated error
message for it existed. This has been changed.
In order to reduce code duplication, the new error code NEEDS_CHECKING
has been introduced which makes ebml_parse check the AVIOContext's
status for errors.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
ebml_read_num had a number of flaws:
1. The check for read errors/EOF was totally wrong. E.g. an EBML number
beginning with the invalid 0x00 would be considered a read error,
although it is just invalid data.
2. The check for read errors/EOF was done just once, after reading the
first byte of the EBML number. But errors/EOF can happen inbetween, of
course, and this wasn't checked.
3. There was no way to distinguish when EOF should be an error (because
the data has to be there) for which an error message should be emitted
and when it is not necessarily an error (namely during parsing of EBML
IDs). Such a possibility has been added and used.
All this was fixed; furthermore, the error messages for invalid EBML
numbers were improved and useless initializations were removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, webm_dash_manifest_cues used the return values of
ebml_read_num and ebml_read_length without checking for errors,
i.e. return values < 0. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It is only necessary to zero the initial allocated memory used to store
the size of laced frames if the block used Xiph lacing. Otherwise no
unintialized data was ever used, so use av_malloc instead of av_mallocz.
Also use the correct type for the allocations.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Get rid of pr dependency and write the columns strictly
alphabetical without page size considerations (POSIX
specifies 66 lines as default).
Setting the page size via pr's -l option was considered,
but as there is issue #5680 which wants to avoid pr
mainly because it's not in busybox, we chose to replace
pr instead.
Before pr would attempt to write pages, thus if a page
boundary was reached, the output looked confusing as one
couldn't see there was a new page and the alphabetical
order was disrupted when scanning down one of the columns.
This change is based on a shell implementation submitted
before by Yejun.
Possible differences to the current version using pr:
1. pr implementations should truncate items to not overflow columns;
depending on how it's done not truncating shall be better IMHO.
2. pr implementations might balance columns differently;
we use minimum number of lines and might end up not
using all columns or might have lesser entries in the
last column(s)
3. we use spaces only for padding the columns; at least the GNU pr
version on my system also by default stuffs in tabs in addition
to a single space in between columns. I don't see that this
behaviour is demanded by POSIX, though I might be very well
overlooking things. Anyway for our use case I can't see a need
for having the additional tabs, or why it would be better compared
to padding with spaces only.
Fixes output for sizes with width < column width, too.
Fixes remaining part of ticket #5680
Contributor: Guo, Yejun <yejun.guo@intel.com>
When multiple variant streams are specified by var_stream_map option,
%v is expected either in the filename or in the last sub-directory name,
but only in one of them. When both of them contains %v string, current
error message only states half of the truth.
And even %v may appears several times inside the last sub-directory name
or in filename pattern.
This patch clarifies this in the log message and in the doc also.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Up until now, the SimpleBlock was treated specially: It basically had
its own EBML category and it was also included in the BlockGroup EBML
syntax (although a SimpleBlock must not exist in a BlockGroup according
to the Matroska specifications). The latter fact also meant that
a MatroskaBlock's buffer was always unreferenced twice.
This has been changed: The type of a SimpleBlock is now an EBML_BIN.
The only way in which SimpleBlocks are still different is that they
share their associated structure with another unit (namely BlockGroup).
This is also used to unref the block: It is always unreferenced via the
BlockGroup syntax.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: out of array access
Fixes: 15381/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_IFF_ILBM_fuzzer-5668057826983936
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 15372/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_IFF_ILBM_fuzzer-5708881759567872
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Before this commit, the Matroska muxer would read a block when required
to do so, parse the block, create and return the necessary AVPackets and
yet keep the blocks (in a dynamically allocated list), although they
aren't used at all any more. This has been changed. There is no list any
more and the block is immediately discarded after parsing.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Every new element of an EbmlList is zeroed initially in
ebml_parse_elem, so that in particular a SimpleBlock's duration is
initialized to zero. Therefore it is unnecessary to initialize this
field again (for SimpleBlocks) in matroska_parse_cluster_incremental.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
By default, the data_offset member of the AVFormatInternal of the
AVFormatContext associated with the MatroskaDemuxContext has not been
initialized explicitly by any Matroska-specific function, so that it was
initialized by default to the offset at the end of matroska_read_header,
i.e. usually to the offset of the length field of the first encountered
cluster. This meant that in case that the Matroska-specific seek-code
fails because there are no index entries for the target track a seek to
data_offset would be performed and ordinary parsing would start from
there which is nonsense: The length field would be treated as EBML ID and
(if the length field is not longer than four bytes (EBML numbers that
long are rejected as invalid EBML IDs)) whatever comes next would be
treated as its EBML size although it simply isn't.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The earlier code relied on the length of clusters always being coded on
eight bytes as was the behaviour of libavformat's Matroska muxer until
recently. But given that our own Matroska muxer now (and mkvmerge from
time immemorial) creates files that don't conform to this assumption,
it is high time to get rid of this assumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When the new incremental parser was introduced, the old parser was
kept, because the new parser was unable to handle the way SSA packets
are put into Matroska. But since 2014 (since c7d8dbad) this is no
longer needed, so that the old parser can be completely removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This commit replaces copying attached pictures by using references to
the already existing buffers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When multiple variant streams are specified by var_stream_map option,
implementation assumes that each elementary stream is assigned only once
to any variant. But this is not checked. This patch makes this checking.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Reviewed-by: Steven Liu<lq@onvideo.cn>
Fixes: left shift of 1 by 31 places cannot be represented in type 'int'
Fixes: 15118/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-5740230004441088
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 44444442 * 100 cannot be represented in type 'int'
Fixes: 15117/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-5164660531134464
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: left shift of 1 by 31 places cannot be represented in type 'int'
Fixes: 15123/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-5738039235575808
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit uses smaller types for some static const arrays to reduce
their size in case the entries can be represented in the smaller type.
The biggest savings came from inv_map_table in vp9.c.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
avformat/movenc still relies on AVCodecContext time_base to mux tmcd
tracks and segment muxer did not copy that field to inner streams
leading to SIGFPE in the child muxer instance.
When multiple variant streams are specified by var_stream_map option, %v
placeholder in various names ensures that each variant has its unique
names. Currently %v is substituted by its variant index value (0, 1, 2
etc.). In some use cases it would be handy to specify names for variants
instead of numerical indexes. This patch makes it possible to use names
instead of default indexes. In var_stream_map option each or some of the
variant streams may use an optional name attributum (e.g.
-var_stream_map "v:0,a:0,name:sd v:1,a:1,name:720p") If a name is
specified for a variant, then this name value will be used as
substitution value of %v instead of the default index value.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@onvideo.cn>
Hi All,
When multiple variant streams are specified by var_stream_map option, %v
placeholder in various names ensures that each variant has its unique
names. Most of %v handlng is done in format_name function. Currently
in this function the result buffer is the same as the
input pattern buffer, so you must allocate it before calling format_name
function. It also means, that it is silently assumed that the result
string will NOT be
longer that the pattern string. It is true most of the time, because %v
may appear only once in the pattern string and number of variant streams
is less than 100 in practical cases. But theoretically it will fail if
specified number of variant streams is greater than 100 (i.e. longer
than 2 digits).
This patch fixes this behaviour by altering format_name function to
allocate the
result buffer and return it to the caller.
Please, review this patch.
best,
Bela
>From 6377ebee8a106a9684d41b270c7d6c8e57cd3e7b Mon Sep 17 00:00:00 2001
From: Bela Bodecs <bodecsb@vivanet.hu>
Date: Mon, 17 Jun 2019 14:31:36 +0200
Subject: [PATCH] av_format/hlsenc: fix %v handling by format_name function
When multiple variant streams are specified by var_stream_map option, %v
placeholder in various names ensures that each variant has its unique
names. Most of %v handlng is done in format_name function. Currently
in this function the result buffer is the same as the input pattern
buffer, so you must allocate it before calling format_name function. It
also means, that it is silently assumed that the result string will NOT
be longer that the pattern string. It is true most of the time, because
%v may appear only once in the pattern string and number of variant
streams is less than 100 in practical cases. But theoretically it will
fail if specified number of variant streams is greater than 100. This
patch fixes this behaviour by altering format_name function to allocate
the result buffer and return it to the caller.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Redundant condition: '!A || B' is equivalent to '!A || (A && B)' but
more clearly.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
FF_DECODE_ERROR_CONCEALMENT_ACTIVE is set when the decoded frame has error(s) but the returned value from
avcodec_receive_frame is zero i.e. concealed errors
Signed-off-by: Amir Pauker <amir@livelyvideo.tv>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: Direct leak of 536 byte(s) in 1 object(s)
Fixes: 15266/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_BINK_fuzzer-5629530426834944
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: left shift of negative value -14614752
Fixes: 15174/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-5670543606415360
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array read
Fixes: 14563/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_AGM_fuzzer-5646451545210880
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
