Throughout hlsenc code, all filename related buffer lengths are set
hardcoded as 1024. This PATCH change it to general value as MAX_URL_SIZE
in internal.h
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
currently master playlist and subtitle playlist creation does not use
temporary files even when temp_file flag is set. Most of the use cases
it is not a problem because master playlist creation happens once on the
beginning of the whole process. But if master playlist is periodically
re-created because of master_pl_refresh_rate is set, non-atomic playlist
creation may cause problems in case of live streaming. This patch
correct this behavior by adding this functionality.
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
When multiple variant streams are specified by var_stream_map option,
%v is expected either in the filename or in the last sub-directory name,
but only in one of them. When both of them contains %v string, current
error message only states half of the truth.
And even %v may appears several times inside the last sub-directory name
or in filename pattern.
This patch clarifies this in the log message and in the doc also.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
When multiple variant streams are specified by var_stream_map option,
implementation assumes that each elementary stream is assigned only once
to any variant. But this is not checked. This patch makes this checking.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Reviewed-by: Steven Liu<lq@onvideo.cn>
When multiple variant streams are specified by var_stream_map option, %v
placeholder in various names ensures that each variant has its unique
names. Currently %v is substituted by its variant index value (0, 1, 2
etc.). In some use cases it would be handy to specify names for variants
instead of numerical indexes. This patch makes it possible to use names
instead of default indexes. In var_stream_map option each or some of the
variant streams may use an optional name attributum (e.g.
-var_stream_map "v:0,a:0,name:sd v:1,a:1,name:720p") If a name is
specified for a variant, then this name value will be used as
substitution value of %v instead of the default index value.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@onvideo.cn>
Hi All,
When multiple variant streams are specified by var_stream_map option, %v
placeholder in various names ensures that each variant has its unique
names. Most of %v handlng is done in format_name function. Currently
in this function the result buffer is the same as the
input pattern buffer, so you must allocate it before calling format_name
function. It also means, that it is silently assumed that the result
string will NOT be
longer that the pattern string. It is true most of the time, because %v
may appear only once in the pattern string and number of variant streams
is less than 100 in practical cases. But theoretically it will fail if
specified number of variant streams is greater than 100 (i.e. longer
than 2 digits).
This patch fixes this behaviour by altering format_name function to
allocate the
result buffer and return it to the caller.
Please, review this patch.
best,
Bela
>From 6377ebee8a106a9684d41b270c7d6c8e57cd3e7b Mon Sep 17 00:00:00 2001
From: Bela Bodecs <bodecsb@vivanet.hu>
Date: Mon, 17 Jun 2019 14:31:36 +0200
Subject: [PATCH] av_format/hlsenc: fix %v handling by format_name function
When multiple variant streams are specified by var_stream_map option, %v
placeholder in various names ensures that each variant has its unique
names. Most of %v handlng is done in format_name function. Currently
in this function the result buffer is the same as the input pattern
buffer, so you must allocate it before calling format_name function. It
also means, that it is silently assumed that the result string will NOT
be longer that the pattern string. It is true most of the time, because
%v may appear only once in the pattern string and number of variant
streams is less than 100 in practical cases. But theoretically it will
fail if specified number of variant streams is greater than 100. This
patch fixes this behaviour by altering format_name function to allocate
the result buffer and return it to the caller.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
when set option fmp4_init_filename to init_%v.mp4
before patch:
the init file will be init_%v_0.mp4, init_%v_1.mp4
after patch:
the init file will be init_0.mp4, init_1.mp4
Reported-By: Gyan Doshi <ffmpeg@gyani.pro>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
This is a regression introduced by 223d2bde22.
It appears that regression was introduced in 4.1, 4.0.x does not share
this behaviour.
Temp files were not created for MPEG-TS segments options - HLS_TEMP_FILE
flag was never set on AVFormatContext, it is however set on HLSContext object.
In order to fix this issue, proper flags field must be checked. In addition,
renaming code was messed up and apparently was working only for MP4 files.
This patch fixes the segmentation fault issues due to
unhandled errors from ff_http_do_new_request function.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Fixes the following warnings:
libavformat/hlsenc.c: In function 'hls_write_trailer':
libavformat/hlsenc.c:2364:17: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
uint8_t *buffer = NULL;
^~~~~~~
libavformat/hlsenc.c:2372:17: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
int byterange_mode = (hls->flags & HLS_SINGLE_FILE) || (hls->max_seg_size > 0);
^~~
libavformat/hlsenc.c:2379:13: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
int range_length = 0;
^~~
fix ticket: 7527
check dirname before use it
refine webvtt code in the hls_delete_old_segments
Reported-by: caspy
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
In fmp4 & sub-range mode, the output's duration always smaller than expected,
because the size of the last #EXT-X-BYTERANGE is too small.
Signed-off-by: Charles Liu <liuchh83@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
The size of init.mp4 is zero in fmp4 mode,
when the input duraton smaller than the expected segment time.
fix ticket: 7166
Signed-off-by: Charles Liu <liuchh83@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
In fmp4 mode, the duration of the second m4s segment is
unusually smaller than the expected segment time.
Signed-off-by: Charles Liu <liuchh83@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Because it will be used by avformat/segment.c or other module which
need to automatically create sub-directories operation.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
fix the build warning for "ISO C90 forbids mixed declarations and code"
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
This fixes the creation of the hls manifest in hlsenc.c by writing the
entire manifest at the end for VOD playlists. Live & Event Playlists are unaffected.
This also fixes the behavior with HLS_TEMP_FILE to work correctly when
-hlsflags temp_file is specified, instead of always relying on use_rename, which caused these problems.
Files that would previously take over a week to fragment now take
1 minute on the same hardware. This was a 153 hour audio file (2.2GB of audio).
Signed-off-by: Ronak Patel <ronak2121@yahoo.com>
fix ticket: 7305
vs->sequence - hls->start_sequence - vs->nb_entries is the
after_init_list_dur fragment numbers
fix the wrong compute way vs->sequence - vs->nb_entries
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
and refine the warning message when use both hls_key_info_file and hls_enc
Reviewed-by: Gyan Doshi <ffmpeg@gyani.pro>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
When using hls_list_size with hls_flags delete_segments, currently
hls_list_size * 2 +- segments remain on disk. With this new option,
the amount of disk space used can be controlled by the user.
fix ticket: #7131
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Aman Gupta <aman@tmm1.net>
When var_stream_map option is used, %v must appear either in segment
name template or in the directory path. This latter case currently is
not handled and delete_segments flag of hls_flags is broken now. This
patch fix this. The root cause of the bug was that HLSSegment struct
only stores the final filename part, but not the final directory path.
Most of the cases, final path info is unneded, It only necessary when
you want to delete old segments (e.g in case of live streaming).
Without variant streams it was unnecessary to store the final directory
path, because all segment were stored into the same directory. But
introducing %v in directory names either require to store the final
directory path into HLSSegment or associate segments with their variant
streams to be able deleting them later. I have choosen the second
solution and introduced a variant index data member into the segment
struct.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@onvideo.cn>
av_strtok calls strspn on a non-NULL *saveptr, so not NULL initializing
it is an issue.
Fixes CID #1428568
Reviewed-by: Karthick Jeyapal <kjeyapal@akamai.com>
Signed-off-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Enables having proper bit rate values being written into the master
playlist in case of hard-constrained VBR where the maximum bit
rate utilized is known before hand.
Does the same thing as movenc.c, for example.
Signed-off-by: Jan Ekström <jan.ekstrom@aminocom.com>