This allows to copy information related to the stream ID from the demuxer
to the muxer, thus allowing for example to retain information related to
synchronous and asynchronous KLV data packets. This information is used
in the muxer when remuxing to distinguish the two kind of packets (if the
information is lacking, data packets are considered synchronous).
The fate reference changes are due to the use of
av_packet_merge_side_data(), which increases the size of the output
packet size, since side data is merged into the packet data.
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
Note that this slightly changes behavior: it sets AVMEDIA_TYPE_UNKNOWN
if the codec type is unknown. This should be ok.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
PES header size is 6 bytes (00 00 01 bf XX XX), not 0.
BluRay text subtitles use private stream 2.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Failure should not be possible, if it does occur then the code is
buggy and should be fixed not silently clip
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is required for the (not yet in git) private stream detection/export,
no other testcase known
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes Detecting AAC with such descriptor if the parts needed for detection
are later in the stream
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '82de8d71118f4eafd6a43e9ea9169bd411793798':
mpegts: Update the PSI/SI table only if the version change
Conflicts:
libavformat/mpegts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If a PAT is finished while a PMT section filter is opened but
not yet finished, the PMT section filter is closed and all
the received data is discarded.
This is usually not an issue but some multiplexers (With very
quick PAT/PMT repetition settings) consistently emit a PMT
section start, then a PAT, and then the rest of the PMT,
causing the aforementioned behavior to result in no PMT being
finished.
In the most pathologic situation the stream information are lost
and the probe fallback miscategorizes subtitles as mp3 audio.
Avoid the issue through eliminating redundant PSI/SI table
updates by checking their version field, which is required by
the standard to be incremented on every change no matter how
minor.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '1509c018bd5b054a2354e20021ccbac9c934d213':
mpegts: relax restrictions on matching the packet start in read_header
Conflicts:
libavformat/mpegts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
analyze() is currently called both when probing and from read_header().
It determines the packet start by looking for the sync byte, followed by
unset Transport Error Indicator and valid adaptation_field_control.
This makes sense to do when probing, but once we already know the format
is MPEG-TS, it is counterproductive to be so strict -- e.g. in some
files the TEI might be set and analyze() might get called with a smaller
buffer than the one used for probing, resulting in a failure.
Nothing uses it, and it provides no public API.
Archeological finds:
Commit 101036adb9 added the API.
Commit a8dd8dc6e9 made mpegts.c use it.
Commit af8aae3fa3 disabled it by default in mpegts.c.
Commit ae2bb52cd2 removed all uses of this from mpegts.c.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '9cfa68c560bdec82d2d5ec079f9c5b0f9ca37af0':
mpegts: add support for Opus
Conflicts:
libavcodec/opus_parser.c
libavformat/mpegts.c
See: 74141f693d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows selecting if the demuxer should consider all streams to be
found after the first PMT and add further streams during decoding or if it rather
should scan all that are within the analyze-duration and other limits
Fixes Ticket3762
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This way if we by chance run into a valid PMT we have a more complete
set of streams, also do not reset streams in case we run into a worse
PMT
Fixes Ticket4046
alternatively Ticket4046 could be closed as invalid or wontfix as it contains
some PMTs which lack the 2 subtitle streams
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add the judement after create a new program to avoid segment fault.
Signed-off-by: Di Wu <di1028.wu@samsung.com>
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array read
Fixes: signal_sigsegv_844d59_10_signal_sigsegv_a17bb7_366_mpegts_mpeg2video_mp2_dvbsub_topfield.rec
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The were wrongly being exported and used by libavdevice
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
AVFormatContext->priv_data is not always a MpegTSContext, it can be
RTSPState when decoding a RTP stream. So it is necessary to pass
MpegTSContext pointer explicitly.
Within libav, the write_section_data function doesn't actually use
the MpegTSContext at all, so this doesn't change anything at the
moment (no memory was corrupted before), but it reduces the risk of
anybody trying to touch the MpegTSContext via AVFormatContext->priv_data
in the future.
Signed-off-by: Martin Storsjö <martin@martin.st>
AVFormatContext->priv_data is not always a MpegTSContext, it can be
RTSPState when decoding a RTP stream. So it is necessary to pass
MpegTSContext pointer explicitly.
This fixes memory corruption from bug #3721 (RTSPState is smaller than
MpegTSContext thus innocent memory gets overwritten).
Signed-off-by: Alexander V. Lukyanov <lavv17f@gmail.com>
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
I don't think this can acutally happen in the current code, but better safe
than sorry.
Fixes Coverity CID 732217.
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '5397386effba2e53e4ff82852a86f6be4d59e9c1':
mathops: move macro to the only place it is used
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit f65afef1df.
If only pts is coded then dts must be equal pts
See Rec. ITU-T H.222.0 (06/2012) / ISO/IEC 13818-1:2013 (E) 2.7.5
Found-by: Baptiste Coudurier
We cannot easily determine if an mpeg TS's packet size is DVHS, FEC
or so on, for that we need to expose the internal raw_packet_size
field.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Copy multiple languages data from PMT to extradata. New 5 bytes
per language extradata format.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This (ugly) hack fixes Ticket3348
If someone has an idea on how to fix this nicer, that would be very welcome
but the stream contains several PMTs with just one of the 2 streams at the start
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* Using extradata by TS demuxer to store values from PMT
* Support of multiple languages in one DVB teletext stream:
comma separated language codes in metadata "language" field
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Used in some HLS streams ("Timed Metadata for HTTP Live Streaming").
This is just ID3 tags at arbitrary stream positions, but I still added
"timed" to the codec name to avoid confusion with regular non-stream ID3
tags.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
We cannot easily determine if an mpeg TS's packet size is DVHS, FEC
or so on, for that we need to expose the internal raw_packet_size
field.
Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This disables NOHEADER after finding PMT for all programs to
avoid find_stream_info always exhausting probe size for mpegts.
This is very important for live streams since read speed
will be limited. rtsp, udp and any protocol streaming a live
mpegts will have dramatically faster startup time.
Note, lack of codec parameters for streams can still cause
the full probe size to be exhausted.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The seek ended up seeking before the begin, which caused problems
Fixes initial sync issues with libbluray
Fixes Ticket3117
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes an infinite loop
An alternative fix would be to revert d73cbc22c5
but that would worsen error resilience.
Found-by: Justin Ruggles
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids the loss of a packet in many cases if the packet size was wrong.
It also improves detection of packet size changes
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
No case is known to have triggered this, but its more correct to check that the
new size differs.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
